xhci: KASSERT panic on USB run0 network load

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

xhci: KASSERT panic on USB run0 network load

Adam Wolk-2
Hi bugs@,

While workin on an update to my ports I hit a panic in xhci.
The only USB device attached to my machine currently is a USB
WiFi dongle (TP-LINK TL-WDN3200) running as run0. The crash
happened during increased networking activity (I was downloading
new src tarballs from upstream).

After rebooting and resuming work on ports I hit the same panic again.
This time also during increased networking acitvity (I was installing
qt5 with pkg_add).

This laptop used to work very stable with this WiFi dongle regardless
of network load. I looked at the backtrace and checked the latest changes
in xhci.c. I have a *suspicion* that the issue is caused by commit 1.111
in /usr/src/sys/dev/usb/xhci.c from date: 2020/01/22 02:25:11. The code
fails on an assert with:

        KASSERT(xp->free_trbs >= 1)

The code that does accounting for xp->free_trbs was altered in 1.111 that
plus the timing is the reason why I believe it *might* cause my issue.

The last *known* stable kernel for this laptop was:
Jan 28 21:01:36 napalm /bsd: OpenBSD 6.6-current (GENERIC.MP) #539: Mon Dec 16 21:23:19 MST 2019
Jan 28 21:01:36 napalm /bsd:     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP

this had seen various loads and for sure didn't hit this panic.

I noticed the panics after booting up to:
Feb  2 19:01:58 napalm /bsd: OpenBSD 6.6-current (GENERIC.MP) #628: Sat Feb  1 23:32:22 MST 2020
Feb  2 19:01:58 napalm /bsd:     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP

I didn't hit them on the previous kernel I had installed:
Jan 31 15:37:15 napalm /bsd: OpenBSD 6.6-current (GENERIC.MP) #622: Mon Jan 27 00:12:59 MST 2020

However that one didn't see any significant network load. So I might have just been lucky.

I have reverted 1.111 on xhci.c on my local machine and installed a new kernel without that change.
I am currently running with it but it's too early to tell if that helped.
I will likely try reverting 1.110 next if the issue still persists.

I am attaching a dmesg from this machine and screenshots of the first crash [0], plus a full set
from the second crash [1] (trace from all cpus [2]). I also have screenshots of full ps output for the
second crash - not attaching them unless requested as they are mostly filled with chromium processes.

Total linked image size: 8.4M
[0] - https://junk.tintagel.pl/openbsd/bugs/xhci/IMG_20200202_172330_2.jpg
[1] - https://junk.tintagel.pl/openbsd/bugs/xhci/IMG_20200202_184607_2.jpg
[2] - https://junk.tintagel.pl/openbsd/bugs/xhci/IMG_20200202_185031_3.jpg

I am willing to test diffs, including debug ones. However please expect a larger latency
after the weekend.

Regards,
Adam Wolk

dmesg:

OpenBSD 6.6-current (GENERIC.MP) #622: Mon Jan 27 00:12:59 MST 2020
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8464887808 (8072MB)
avail mem = 8195858432 (7816MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
bios0: LENOVO 20351
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
acpi0: wakeup devices P0P1(S4) EHC1(S3) XHC_(S3) HDEF(S4) PXSX(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PEGP(S4) PEGA(S4) PXSX(S4) PXSX(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.88 MHz, 06-45-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.61 MHz, 06-45-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.61 MHz, 06-45-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP03)
acpiprt3 at acpi0: bus 2 (RP04)
acpiprt4 at acpi0: bus 3 (RP05)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiprt6 at acpi0: bus -1 (PEG1)
acpiprt7 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: AMD3, resource for RP05
acpipwrres1 at acpi0: AMD2, resource for RP05
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
extent `acpipci0 pcibus' (0x0 - 0xff), flags=0
     0xff - 0xff
extent `acpipci0 pciio' (0x0 - 0xffffffff), flags=0
     0xcf8 - 0xcff
     0x10000 - 0xffffffff
extent `acpipci0 pcimem' (0x0 - 0xffffffffffffffff), flags=0
     0x0 - 0x9ffff
     0xc0000 - 0xaf9fffff
     0xfeb00000 - 0xffffffffffffffff
"CIND0C60" at acpi0 not configured
acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
"VPC2004" at acpi0 not configured
acpicmos0 at acpi0
"IDEA0102" at acpi0 not configured
"ETD0624" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200, 2000, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Conexant/0x510f
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 68:f7:28:39:b2:85
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
"Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 3
3:0:0: rom address conflict 0xfffe0000/0x20000
radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 8500M" rev 0x00
drm1 at radeondrm0
radeondrm0: msi
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0> naa.50014ee60528f927
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 4, firmware 0x594f03
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address e8:94:f6:10:a6:a2
ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo EasyCamera" rev 2.00/0.06 addr 4
video0 at uvideo0
ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev 1.10/0.01 addr 5
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
root on sd1a (5a23de4c02590db4.a) swap on sd1b dump on sd1b
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
[TTM] Memory type 2 has not been initialized
drm1 detached
radeondrm0 detached
"ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
uhidev0 at uhub0 port 1 configuration 1 interface 0 "A4Tech USB Mouse" rev 1.10/10.32 addr 6
uhidev0: iclass 3/1, 4 report ids
ums0 at uhidev0 reportid 1: 8 buttons, Z dir
wsmouse1 at ums0 mux 0
uhid0 at uhidev0 reportid 4: input=5, output=0, feature=0
wsmouse1 detached
ums0 detached
uhid0 detached
uhidev0 detached
syncing disks... done
rebooting...
OpenBSD 6.6-current (RAMDISK_CD) #601: Sat Feb  1 23:39:30 MST 2020
    [hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 8464887808 (8072MB)
avail mem = 8204320768 (7824MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
bios0: LENOVO 20351
acpi0 at bios0: ACPI 5.0
acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.90 MHz, 06-45-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP03)
acpiprt3 at acpi0: bus 2 (RP04)
acpiprt4 at acpi0: bus 3 (RP05)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiprt6 at acpi0: bus -1 (PEG1)
acpiprt7 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
"PNP0A08" at acpi0 not configured
"CIND0C60" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"VPC2004" at acpi0 not configured
acpicmos0 at acpi0
"IDEA0102" at acpi0 not configured
"ETD0624" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
cpu0: using Broadwell MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel Core 4G HD Audio" rev 0x0b at pci0 dev 3 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
"Intel 8 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 68:f7:28:39:b2:85
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
"Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 3
3:0:0: rom address conflict 0xfffe0000/0x20000
"ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 8 Series LPC" rev 0x04 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0> naa.50014ee60528f927
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus0 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
"Intel 8 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address e8:94:f6:10:a6:a2
"Generic USB2.0-CRW" rev 2.00/39.60 addr 3 at uhub0 port 4 not configured
"J58E8R30X Lenovo EasyCamera" rev 2.00/0.06 addr 4 at uhub0 port 6 not configured
"vendor 0x0cf3 product 0x3004" rev 1.10/0.01 addr 5 at uhub0 port 7 not configured
uhub2 at uhub1 port 1 configuration 1 interface 0 "vendor 0x8087 product 0x8000" rev 2.00/0.04 addr 2
softraid0 at root
scsibus1 at softraid0: 256 targets
sd1 at scsibus1 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
root on rd0a swap on rd0b dump on rd0b
syncing disks...
OpenBSD 6.6-current (GENERIC.MP) #628: Sat Feb  1 23:32:22 MST 2020
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8464887808 (8072MB)
avail mem = 8195870720 (7816MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
bios0: LENOVO 20351
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
acpi0: wakeup devices P0P1(S4) EHC1(S3) XHC_(S3) HDEF(S4) PXSX(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PEGP(S4) PEGA(S4) PXSX(S4) PXSX(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.88 MHz, 06-45-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP03)
acpiprt3 at acpi0: bus 2 (RP04)
acpiprt4 at acpi0: bus 3 (RP05)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiprt6 at acpi0: bus -1 (PEG1)
acpiprt7 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: AMD3, resource for RP05
acpipwrres1 at acpi0: AMD2, resource for RP05
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
"CIND0C60" at acpi0 not configured
acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
"VPC2004" at acpi0 not configured
acpicmos0 at acpi0
"IDEA0102" at acpi0 not configured
"ETD0624" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200, 2000, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Conexant/0x510f
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 68:f7:28:39:b2:85
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
"Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 3
3:0:0: rom address conflict 0xfffe0000/0x20000
radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 8500M" rev 0x00
drm1 at radeondrm0
radeondrm0: msi
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0> naa.50014ee60528f927
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 4, firmware 0x594f03
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address e8:94:f6:10:a6:a2
ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo EasyCamera" rev 2.00/0.06 addr 4
video0 at uvideo0
ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev 1.10/0.01 addr 5
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
root on sd1a (5a23de4c02590db4.a) swap on sd1b dump on sd1b
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
[TTM] Memory type 2 has not been initialized
drm1 detached
radeondrm0 detached
"ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
OpenBSD 6.6-current (GENERIC.MP) #628: Sat Feb  1 23:32:22 MST 2020
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8464887808 (8072MB)
avail mem = 8195850240 (7816MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
bios0: LENOVO 20351
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
acpi0: wakeup devices P0P1(S4) EHC1(S3) XHC_(S3) HDEF(S4) PXSX(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PEGP(S4) PEGA(S4) PXSX(S4) PXSX(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.94 MHz, 06-45-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.63 MHz, 06-45-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP03)
acpiprt3 at acpi0: bus 2 (RP04)
acpiprt4 at acpi0: bus 3 (RP05)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiprt6 at acpi0: bus -1 (PEG1)
acpiprt7 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: AMD3, resource for RP05
acpipwrres1 at acpi0: AMD2, resource for RP05
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
"CIND0C60" at acpi0 not configured
acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
"VPC2004" at acpi0 not configured
acpicmos0 at acpi0
"IDEA0102" at acpi0 not configured
"ETD0624" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200, 2000, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Conexant/0x510f
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 68:f7:28:39:b2:85
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
"Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 3
3:0:0: rom address conflict 0xfffe0000/0x20000
radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 8500M" rev 0x00
drm1 at radeondrm0
radeondrm0: msi
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0> naa.50014ee60528f927
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 4, firmware 0x594f03
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address e8:94:f6:10:a6:a2
ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo EasyCamera" rev 2.00/0.06 addr 4
video0 at uvideo0
ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev 1.10/0.01 addr 5
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
softraid0: sd1 was not shutdown properly
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
root on sd1a (5a23de4c02590db4.a) swap on sd1b dump on sd1b
WARNING: / was not properly unmounted
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
[TTM] Memory type 2 has not been initialized
drm1 detached
radeondrm0 detached
"ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
OpenBSD 6.6-current (GENERIC.MP) #628: Sat Feb  1 23:32:22 MST 2020
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8464887808 (8072MB)
avail mem = 8195866624 (7816MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
bios0: LENOVO 20351
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
acpi0: wakeup devices P0P1(S4) EHC1(S3) XHC_(S3) HDEF(S4) PXSX(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PEGP(S4) PEGA(S4) PXSX(S4) PXSX(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.92 MHz, 06-45-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP03)
acpiprt3 at acpi0: bus 2 (RP04)
acpiprt4 at acpi0: bus 3 (RP05)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiprt6 at acpi0: bus -1 (PEG1)
acpiprt7 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: AMD3, resource for RP05
acpipwrres1 at acpi0: AMD2, resource for RP05
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
"CIND0C60" at acpi0 not configured
acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
"VPC2004" at acpi0 not configured
acpicmos0 at acpi0
"IDEA0102" at acpi0 not configured
"ETD0624" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200, 2000, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Conexant/0x510f
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 68:f7:28:39:b2:85
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
"Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 3
3:0:0: rom address conflict 0xfffe0000/0x20000
radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 8500M" rev 0x00
drm1 at radeondrm0
radeondrm0: msi
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0> naa.50014ee60528f927
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 4, firmware 0x594f03
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address e8:94:f6:10:a6:a2
ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo EasyCamera" rev 2.00/0.06 addr 4
video0 at uvideo0
ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev 1.10/0.01 addr 5
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
softraid0: sd1 was not shutdown properly
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
root on sd1a (5a23de4c02590db4.a) swap on sd1b dump on sd1b
WARNING: / was not properly unmounted
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
[TTM] Memory type 2 has not been initialized
drm1 detached
radeondrm0 detached
"ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
syncing disks... done
rebooting...
OpenBSD 6.6-current (GENERIC.MP) #6: Sun Feb  2 19:35:42 CET 2020
    [hidden email]:/sys/arch/amd64/compile/GENERIC.MP
real mem = 8464887808 (8072MB)
avail mem = 8195850240 (7816MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
bios0: LENOVO 20351
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
acpi0: wakeup devices P0P1(S4) EHC1(S3) XHC_(S3) HDEF(S4) PXSX(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PEGP(S4) PEGA(S4) PXSX(S4) PXSX(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.87 MHz, 06-45-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP03)
acpiprt3 at acpi0: bus 2 (RP04)
acpiprt4 at acpi0: bus 3 (RP05)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiprt6 at acpi0: bus -1 (PEG1)
acpiprt7 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: AMD3, resource for RP05
acpipwrres1 at acpi0: AMD2, resource for RP05
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
"CIND0C60" at acpi0 not configured
acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
"VPC2004" at acpi0 not configured
acpicmos0 at acpi0
"IDEA0102" at acpi0 not configured
"ETD0624" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200, 2000, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Conexant/0x510f
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 68:f7:28:39:b2:85
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
"Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 3
3:0:0: rom address conflict 0xfffe0000/0x20000
radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 8500M" rev 0x00
drm1 at radeondrm0
radeondrm0: msi
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0> naa.50014ee60528f927
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 4, firmware 0x594f03
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address e8:94:f6:10:a6:a2
ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo EasyCamera" rev 2.00/0.06 addr 4
video0 at uvideo0
ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev 1.10/0.01 addr 5
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
root on sd1a (5a23de4c02590db4.a) swap on sd1b dump on sd1b
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
[TTM] Memory type 2 has not been initialized
drm1 detached
radeondrm0 detached
"ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured

Reply | Threaded
Open this post in threaded view
|

Re: xhci: KASSERT panic on USB run0 network load

Kenneth Westerback
A kernel with XHCI_DEBUG may supply useful info.

Testing the device on the EHCI port I see in your dmesg would also be
useful to confirm the problem is likely in xhci vs run.

A quick test with an older run device plugged into my Lenovo e595 has not
panic'ed yet.

Are you connecting to an ' N' access point or 'G', or ...

.... Ken


On Sun., Feb. 2, 2020, 3:19 p.m. Adam Wolk, <[hidden email]> wrote:

> Hi bugs@,
>
> While workin on an update to my ports I hit a panic in xhci.
> The only USB device attached to my machine currently is a USB
> WiFi dongle (TP-LINK TL-WDN3200) running as run0. The crash
> happened during increased networking activity (I was downloading
> new src tarballs from upstream).
>
> After rebooting and resuming work on ports I hit the same panic again.
> This time also during increased networking acitvity (I was installing
> qt5 with pkg_add).
>
> This laptop used to work very stable with this WiFi dongle regardless
> of network load. I looked at the backtrace and checked the latest changes
> in xhci.c. I have a *suspicion* that the issue is caused by commit 1.111
> in /usr/src/sys/dev/usb/xhci.c from date: 2020/01/22 02:25:11. The code
> fails on an assert with:
>
>         KASSERT(xp->free_trbs >= 1)
>
> The code that does accounting for xp->free_trbs was altered in 1.111 that
> plus the timing is the reason why I believe it *might* cause my issue.
>
> The last *known* stable kernel for this laptop was:
> Jan 28 21:01:36 napalm /bsd: OpenBSD 6.6-current (GENERIC.MP) #539: Mon
> Dec 16 21:23:19 MST 2019
> Jan 28 21:01:36 napalm /bsd:     [hidden email]:
> /usr/src/sys/arch/amd64/compile/GENERIC.MP
>
> this had seen various loads and for sure didn't hit this panic.
>
> I noticed the panics after booting up to:
> Feb  2 19:01:58 napalm /bsd: OpenBSD 6.6-current (GENERIC.MP) #628: Sat
> Feb  1 23:32:22 MST 2020
> Feb  2 19:01:58 napalm /bsd:     [hidden email]:
> /usr/src/sys/arch/amd64/compile/GENERIC.MP
>
> I didn't hit them on the previous kernel I had installed:
> Jan 31 15:37:15 napalm /bsd: OpenBSD 6.6-current (GENERIC.MP) #622: Mon
> Jan 27 00:12:59 MST 2020
>
> However that one didn't see any significant network load. So I might have
> just been lucky.
>
> I have reverted 1.111 on xhci.c on my local machine and installed a new
> kernel without that change.
> I am currently running with it but it's too early to tell if that helped.
> I will likely try reverting 1.110 next if the issue still persists.
>
> I am attaching a dmesg from this machine and screenshots of the first
> crash [0], plus a full set
> from the second crash [1] (trace from all cpus [2]). I also have
> screenshots of full ps output for the
> second crash - not attaching them unless requested as they are mostly
> filled with chromium processes.
>
> Total linked image size: 8.4M
> [0] - https://junk.tintagel.pl/openbsd/bugs/xhci/IMG_20200202_172330_2.jpg
> [1] - https://junk.tintagel.pl/openbsd/bugs/xhci/IMG_20200202_184607_2.jpg
> [2] - https://junk.tintagel.pl/openbsd/bugs/xhci/IMG_20200202_185031_3.jpg
>
> I am willing to test diffs, including debug ones. However please expect a
> larger latency
> after the weekend.
>
> Regards,
> Adam Wolk
>
> dmesg:
>
> OpenBSD 6.6-current (GENERIC.MP) #622: Mon Jan 27 00:12:59 MST 2020
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8464887808 (8072MB)
> avail mem = 8195858432 (7816MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
> bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
> bios0: LENOVO 20351
> acpi0 at bios0: ACPI 5.0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT
> BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
> acpi0: wakeup devices P0P1(S4) EHC1(S3) XHC_(S3) HDEF(S4) PXSX(S4)
> PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PEGP(S4) PEGA(S4)
> PXSX(S4) PXSX(S4) PXSX(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.88 MHz, 06-45-01
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.61 MHz, 06-45-01
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.61 MHz, 06-45-01
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 1 (RP03)
> acpiprt3 at acpi0: bus 2 (RP04)
> acpiprt4 at acpi0: bus 3 (RP05)
> acpiprt5 at acpi0: bus -1 (PEG0)
> acpiprt6 at acpi0: bus -1 (PEG1)
> acpiprt7 at acpi0: bus -1 (PEG2)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: AMD3, resource for RP05
> acpipwrres1 at acpi0: AMD2, resource for RP05
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> extent `acpipci0 pcibus' (0x0 - 0xff), flags=0
>      0xff - 0xff
> extent `acpipci0 pciio' (0x0 - 0xffffffff), flags=0
>      0xcf8 - 0xcff
>      0x10000 - 0xffffffff
> extent `acpipci0 pcimem' (0x0 - 0xffffffffffffffff), flags=0
>      0x0 - 0x9ffff
>      0xc0000 - 0xaf9fffff
>      0xfeb00000 - 0xffffffffffffffff
> "CIND0C60" at acpi0 not configured
> acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
> "VPC2004" at acpi0 not configured
> acpicmos0 at acpi0
> "IDEA0102" at acpi0 not configured
> "ETD0624" at acpi0 not configured
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: LID0
> acpibtn1 at acpi0: PWRB
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F
> cpu0: using VERW MDS workaround (except on vmm entry)
> cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200,
> 2000, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
> drm0 at inteldrm0
> inteldrm0: msi
> azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
> azalia0: No codecs found
> xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI
> 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
> azalia1: codecs: Conexant/0x510f
> audio0 at azalia1
> ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
> pci1 at ppb0 bus 1
> re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU
> (0x5080), msi, address 68:f7:28:39:b2:85
> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
> ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
> pci2 at ppb1 bus 2
> "Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
> ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
> pci3 at ppb2 bus 3
> 3:0:0: rom address conflict 0xfffe0000/0x20000
> radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 8500M" rev 0x00
> drm1 at radeondrm0
> radeondrm0: msi
> ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int
> 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI
> 1.3
> ahci0: port 0: 6.0Gb/s
> ahci0: port 1: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0>
> naa.50014ee60528f927
> sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
> cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
> ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2
> int 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pms0: Elantech Touchpad, version 4, firmware 0x594f03
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN"
> rev 2.00/1.01 addr 2
> run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address
> e8:94:f6:10:a6:a2
> ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
> uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo
> EasyCamera" rev 2.00/0.06 addr 4
> video0 at uvideo0
> ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev
> 1.10/0.01 addr 5
> uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.04 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
> root on sd1a (5a23de4c02590db4.a) swap on sd1b dump on sd1b
> inteldrm0: 1366x768, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
> drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
> drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
> [TTM] Memory type 2 has not been initialized
> drm1 detached
> radeondrm0 detached
> "ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
> uhidev0 at uhub0 port 1 configuration 1 interface 0 "A4Tech USB Mouse" rev
> 1.10/10.32 addr 6
> uhidev0: iclass 3/1, 4 report ids
> ums0 at uhidev0 reportid 1: 8 buttons, Z dir
> wsmouse1 at ums0 mux 0
> uhid0 at uhidev0 reportid 4: input=5, output=0, feature=0
> wsmouse1 detached
> ums0 detached
> uhid0 detached
> uhidev0 detached
> syncing disks... done
> rebooting...
> OpenBSD 6.6-current (RAMDISK_CD) #601: Sat Feb  1 23:39:30 MST 2020
>     [hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> real mem = 8464887808 (8072MB)
> avail mem = 8204320768 (7824MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
> bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
> bios0: LENOVO 20351
> acpi0 at bios0: ACPI 5.0
> acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT
> BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.90 MHz, 06-45-01
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> cpu at mainbus0: not configured
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 1 (RP03)
> acpiprt3 at acpi0: bus 2 (RP04)
> acpiprt4 at acpi0: bus 3 (RP05)
> acpiprt5 at acpi0: bus -1 (PEG0)
> acpiprt6 at acpi0: bus -1 (PEG1)
> acpiprt7 at acpi0: bus -1 (PEG2)
> acpiec0 at acpi0
> acpicpu at acpi0 not configured
> acpipwrres at acpi0 not configured
> acpipwrres at acpi0 not configured
> "PNP0A08" at acpi0 not configured
> "CIND0C60" at acpi0 not configured
> "PNP0C0A" at acpi0 not configured
> "VPC2004" at acpi0 not configured
> acpicmos0 at acpi0
> "IDEA0102" at acpi0 not configured
> "ETD0624" at acpi0 not configured
> "ACPI0003" at acpi0 not configured
> "PNP0C0D" at acpi0 not configured
> "PNP0C0C" at acpi0 not configured
> cpu0: using Broadwell MDS workaround
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
> vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
> wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
> "Intel Core 4G HD Audio" rev 0x0b at pci0 dev 3 function 0 not configured
> xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI
> 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> "Intel 8 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
> ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
> pci1 at ppb0 bus 1
> re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU
> (0x5080), msi, address 68:f7:28:39:b2:85
> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
> ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
> pci2 at ppb1 bus 2
> "Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
> ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
> pci3 at ppb2 bus 3
> 3:0:0: rom address conflict 0xfffe0000/0x20000
> "ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
> ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int
> 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> "Intel 8 Series LPC" rev 0x04 at pci0 dev 31 function 0 not configured
> ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI
> 1.3
> ahci0: port 0: 6.0Gb/s
> ahci0: port 1: 1.5Gb/s
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0>
> naa.50014ee60528f927
> sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
> cd0 at scsibus0 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
> "Intel 8 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
> isa0 at mainbus0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay1
> run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN"
> rev 2.00/1.01 addr 2
> run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address
> e8:94:f6:10:a6:a2
> "Generic USB2.0-CRW" rev 2.00/39.60 addr 3 at uhub0 port 4 not configured
> "J58E8R30X Lenovo EasyCamera" rev 2.00/0.06 addr 4 at uhub0 port 6 not
> configured
> "vendor 0x0cf3 product 0x3004" rev 1.10/0.01 addr 5 at uhub0 port 7 not
> configured
> uhub2 at uhub1 port 1 configuration 1 interface 0 "vendor 0x8087 product
> 0x8000" rev 2.00/0.04 addr 2
> softraid0 at root
> scsibus1 at softraid0: 256 targets
> sd1 at scsibus1 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
> root on rd0a swap on rd0b dump on rd0b
> syncing disks...
> OpenBSD 6.6-current (GENERIC.MP) #628: Sat Feb  1 23:32:22 MST 2020
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8464887808 (8072MB)
> avail mem = 8195870720 (7816MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
> bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
> bios0: LENOVO 20351
> acpi0 at bios0: ACPI 5.0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT
> BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
> acpi0: wakeup devices P0P1(S4) EHC1(S3) XHC_(S3) HDEF(S4) PXSX(S4)
> PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PEGP(S4) PEGA(S4)
> PXSX(S4) PXSX(S4) PXSX(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.88 MHz, 06-45-01
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 1 (RP03)
> acpiprt3 at acpi0: bus 2 (RP04)
> acpiprt4 at acpi0: bus 3 (RP05)
> acpiprt5 at acpi0: bus -1 (PEG0)
> acpiprt6 at acpi0: bus -1 (PEG1)
> acpiprt7 at acpi0: bus -1 (PEG2)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: AMD3, resource for RP05
> acpipwrres1 at acpi0: AMD2, resource for RP05
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> "CIND0C60" at acpi0 not configured
> acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
> "VPC2004" at acpi0 not configured
> acpicmos0 at acpi0
> "IDEA0102" at acpi0 not configured
> "ETD0624" at acpi0 not configured
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: LID0
> acpibtn1 at acpi0: PWRB
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F
> cpu0: using VERW MDS workaround (except on vmm entry)
> cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200,
> 2000, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
> drm0 at inteldrm0
> inteldrm0: msi
> azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
> azalia0: No codecs found
> xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI
> 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
> azalia1: codecs: Conexant/0x510f
> audio0 at azalia1
> ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
> pci1 at ppb0 bus 1
> re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU
> (0x5080), msi, address 68:f7:28:39:b2:85
> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
> ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
> pci2 at ppb1 bus 2
> "Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
> ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
> pci3 at ppb2 bus 3
> 3:0:0: rom address conflict 0xfffe0000/0x20000
> radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 8500M" rev 0x00
> drm1 at radeondrm0
> radeondrm0: msi
> ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int
> 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI
> 1.3
> ahci0: port 0: 6.0Gb/s
> ahci0: port 1: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0>
> naa.50014ee60528f927
> sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
> cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
> ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2
> int 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pms0: Elantech Touchpad, version 4, firmware 0x594f03
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN"
> rev 2.00/1.01 addr 2
> run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address
> e8:94:f6:10:a6:a2
> ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
> uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo
> EasyCamera" rev 2.00/0.06 addr 4
> video0 at uvideo0
> ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev
> 1.10/0.01 addr 5
> uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.04 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
> root on sd1a (5a23de4c02590db4.a) swap on sd1b dump on sd1b
> inteldrm0: 1366x768, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
> drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
> drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
> [TTM] Memory type 2 has not been initialized
> drm1 detached
> radeondrm0 detached
> "ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
> OpenBSD 6.6-current (GENERIC.MP) #628: Sat Feb  1 23:32:22 MST 2020
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8464887808 (8072MB)
> avail mem = 8195850240 (7816MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
> bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
> bios0: LENOVO 20351
> acpi0 at bios0: ACPI 5.0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT
> BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
> acpi0: wakeup devices P0P1(S4) EHC1(S3) XHC_(S3) HDEF(S4) PXSX(S4)
> PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PEGP(S4) PEGA(S4)
> PXSX(S4) PXSX(S4) PXSX(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.94 MHz, 06-45-01
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.63 MHz, 06-45-01
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 1 (RP03)
> acpiprt3 at acpi0: bus 2 (RP04)
> acpiprt4 at acpi0: bus 3 (RP05)
> acpiprt5 at acpi0: bus -1 (PEG0)
> acpiprt6 at acpi0: bus -1 (PEG1)
> acpiprt7 at acpi0: bus -1 (PEG2)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: AMD3, resource for RP05
> acpipwrres1 at acpi0: AMD2, resource for RP05
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> "CIND0C60" at acpi0 not configured
> acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
> "VPC2004" at acpi0 not configured
> acpicmos0 at acpi0
> "IDEA0102" at acpi0 not configured
> "ETD0624" at acpi0 not configured
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: LID0
> acpibtn1 at acpi0: PWRB
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F
> cpu0: using VERW MDS workaround (except on vmm entry)
> cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200,
> 2000, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
> drm0 at inteldrm0
> inteldrm0: msi
> azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
> azalia0: No codecs found
> xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI
> 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
> azalia1: codecs: Conexant/0x510f
> audio0 at azalia1
> ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
> pci1 at ppb0 bus 1
> re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU
> (0x5080), msi, address 68:f7:28:39:b2:85
> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
> ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
> pci2 at ppb1 bus 2
> "Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
> ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
> pci3 at ppb2 bus 3
> 3:0:0: rom address conflict 0xfffe0000/0x20000
> radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 8500M" rev 0x00
> drm1 at radeondrm0
> radeondrm0: msi
> ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int
> 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI
> 1.3
> ahci0: port 0: 6.0Gb/s
> ahci0: port 1: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0>
> naa.50014ee60528f927
> sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
> cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
> ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2
> int 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pms0: Elantech Touchpad, version 4, firmware 0x594f03
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN"
> rev 2.00/1.01 addr 2
> run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address
> e8:94:f6:10:a6:a2
> ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
> uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo
> EasyCamera" rev 2.00/0.06 addr 4
> video0 at uvideo0
> ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev
> 1.10/0.01 addr 5
> uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.04 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> softraid0: sd1 was not shutdown properly
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
> root on sd1a (5a23de4c02590db4.a) swap on sd1b dump on sd1b
> WARNING: / was not properly unmounted
> inteldrm0: 1366x768, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
> drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
> drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
> [TTM] Memory type 2 has not been initialized
> drm1 detached
> radeondrm0 detached
> "ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
> OpenBSD 6.6-current (GENERIC.MP) #628: Sat Feb  1 23:32:22 MST 2020
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8464887808 (8072MB)
> avail mem = 8195866624 (7816MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
> bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
> bios0: LENOVO 20351
> acpi0 at bios0: ACPI 5.0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT
> BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
> acpi0: wakeup devices P0P1(S4) EHC1(S3) XHC_(S3) HDEF(S4) PXSX(S4)
> PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PEGP(S4) PEGA(S4)
> PXSX(S4) PXSX(S4) PXSX(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.92 MHz, 06-45-01
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 1 (RP03)
> acpiprt3 at acpi0: bus 2 (RP04)
> acpiprt4 at acpi0: bus 3 (RP05)
> acpiprt5 at acpi0: bus -1 (PEG0)
> acpiprt6 at acpi0: bus -1 (PEG1)
> acpiprt7 at acpi0: bus -1 (PEG2)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: AMD3, resource for RP05
> acpipwrres1 at acpi0: AMD2, resource for RP05
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> "CIND0C60" at acpi0 not configured
> acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
> "VPC2004" at acpi0 not configured
> acpicmos0 at acpi0
> "IDEA0102" at acpi0 not configured
> "ETD0624" at acpi0 not configured
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: LID0
> acpibtn1 at acpi0: PWRB
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F
> cpu0: using VERW MDS workaround (except on vmm entry)
> cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200,
> 2000, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
> drm0 at inteldrm0
> inteldrm0: msi
> azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
> azalia0: No codecs found
> xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI
> 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
> azalia1: codecs: Conexant/0x510f
> audio0 at azalia1
> ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
> pci1 at ppb0 bus 1
> re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU
> (0x5080), msi, address 68:f7:28:39:b2:85
> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
> ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
> pci2 at ppb1 bus 2
> "Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
> ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
> pci3 at ppb2 bus 3
> 3:0:0: rom address conflict 0xfffe0000/0x20000
> radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 8500M" rev 0x00
> drm1 at radeondrm0
> radeondrm0: msi
> ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int
> 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI
> 1.3
> ahci0: port 0: 6.0Gb/s
> ahci0: port 1: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0>
> naa.50014ee60528f927
> sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
> cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
> ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2
> int 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pms0: Elantech Touchpad, version 4, firmware 0x594f03
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN"
> rev 2.00/1.01 addr 2
> run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address
> e8:94:f6:10:a6:a2
> ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
> uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo
> EasyCamera" rev 2.00/0.06 addr 4
> video0 at uvideo0
> ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev
> 1.10/0.01 addr 5
> uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.04 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> softraid0: sd1 was not shutdown properly
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
> root on sd1a (5a23de4c02590db4.a) swap on sd1b dump on sd1b
> WARNING: / was not properly unmounted
> inteldrm0: 1366x768, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
> drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
> drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
> [TTM] Memory type 2 has not been initialized
> drm1 detached
> radeondrm0 detached
> "ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
> syncing disks... done
> rebooting...
> OpenBSD 6.6-current (GENERIC.MP) #6: Sun Feb  2 19:35:42 CET 2020
>     [hidden email]:/sys/arch/amd64/compile/GENERIC.MP
> real mem = 8464887808 (8072MB)
> avail mem = 8195850240 (7816MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
> bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
> bios0: LENOVO 20351
> acpi0 at bios0: ACPI 5.0
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT
> BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
> acpi0: wakeup devices P0P1(S4) EHC1(S3) XHC_(S3) HDEF(S4) PXSX(S4)
> PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PEGP(S4) PEGA(S4)
> PXSX(S4) PXSX(S4) PXSX(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.87 MHz, 06-45-01
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xe0000000, bus 0-255
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 1 (RP03)
> acpiprt3 at acpi0: bus 2 (RP04)
> acpiprt4 at acpi0: bus 3 (RP05)
> acpiprt5 at acpi0: bus -1 (PEG0)
> acpiprt6 at acpi0: bus -1 (PEG1)
> acpiprt7 at acpi0: bus -1 (PEG2)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33),
> C1(1000@1 mwait.1), PSS
> acpipwrres0 at acpi0: AMD3, resource for RP05
> acpipwrres1 at acpi0: AMD2, resource for RP05
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> "CIND0C60" at acpi0 not configured
> acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
> "VPC2004" at acpi0 not configured
> acpicmos0 at acpi0
> "IDEA0102" at acpi0 not configured
> "ETD0624" at acpi0 not configured
> acpiac0 at acpi0: AC unit online
> acpibtn0 at acpi0: LID0
> acpibtn1 at acpi0: PWRB
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: DD1F
> cpu0: using VERW MDS workaround (except on vmm entry)
> cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200,
> 2000, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
> drm0 at inteldrm0
> inteldrm0: msi
> azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
> azalia0: No codecs found
> xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI
> 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
> azalia1: codecs: Conexant/0x510f
> audio0 at azalia1
> ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
> pci1 at ppb0 bus 1
> re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU
> (0x5080), msi, address 68:f7:28:39:b2:85
> rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
> ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
> pci2 at ppb1 bus 2
> "Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
> ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
> pci3 at ppb2 bus 3
> 3:0:0: rom address conflict 0xfffe0000/0x20000
> radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 8500M" rev 0x00
> drm1 at radeondrm0
> radeondrm0: msi
> ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int
> 23
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI
> 1.3
> ahci0: port 0: 6.0Gb/s
> ahci0: port 1: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0>
> naa.50014ee60528f927
> sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
> cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
> ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2
> int 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> pms0: Elantech Touchpad, version 4, firmware 0x594f03
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN"
> rev 2.00/1.01 addr 2
> run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address
> e8:94:f6:10:a6:a2
> ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
> uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo
> EasyCamera" rev 2.00/0.06 addr 4
> video0 at uvideo0
> ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev
> 1.10/0.01 addr 5
> uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
> Hub" rev 2.00/0.04 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
> sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
> root on sd1a (5a23de4c02590db4.a) swap on sd1b dump on sd1b
> inteldrm0: 1366x768, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
> drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
> drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
> [TTM] Memory type 2 has not been initialized
> drm1 detached
> radeondrm0 detached
> "ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
>
>
Reply | Threaded
Open this post in threaded view
|

Re: xhci: KASSERT panic on USB run0 network load

Adam Wolk-2
On Sun, Feb 02, 2020 at 04:06:38PM -0500, Kenneth Westerback wrote:
> A kernel with XHCI_DEBUG may supply useful info.
>

I'm currently running with the XHCI_DEBUG enabled in the kernel.
Attaching a dmesg and will report back if I manage to reproduce
the issue on it.

Look for:

OpenBSD 6.6-current (XHCI_DEBUG) #0: Sun Feb  2 23:55:04 CET 2020
    [hidden email]:/sys/arch/amd64/compile/XHCI_DEBUG

in the trace below.

Between the first two panics I had roughly 1h of usage. You can
see that on the clock from ddb photos. I don't have a reliable
way to reproduce however I wasn't able to trigger it with the xhci.c
commit 1.111 reverted - had several hours of uptime with solid load.

With the XHCI_DEBUG enabled I tried forcing the issue by generating load
(large downloads, speedtests, running pkg_add and trying to load chrome
with HD videos). No luck so far.

> Testing the device on the EHCI port I see in your dmesg would also be
> useful to confirm the problem is likely in xhci vs run.
>

I will attempt that if I manage to reproduce the issue one more time on
the xhci port.

> A quick test with an older run device plugged into my Lenovo e595 has not
> panic'ed yet.
>
> Are you connecting to an ' N' access point or 'G', or ...
>

I am using the same setup on all reboots.

Currently: IEEE802.11 autoselect (OFDM9 mode 11g)

> .... Ken
>
>


OpenBSD 6.6-current (GENERIC.MP) #622: Mon Jan 27 00:12:59 MST 2020
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8464887808 (8072MB)
avail mem = 8195858432 (7816MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
bios0: LENOVO 20351
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
acpi0: wakeup devices P0P1(S4) EHC1(S3) XHC_(S3) HDEF(S4) PXSX(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PEGP(S4) PEGA(S4) PXSX(S4) PXSX(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.88 MHz, 06-45-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.61 MHz, 06-45-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.61 MHz, 06-45-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP03)
acpiprt3 at acpi0: bus 2 (RP04)
acpiprt4 at acpi0: bus 3 (RP05)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiprt6 at acpi0: bus -1 (PEG1)
acpiprt7 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: AMD3, resource for RP05
acpipwrres1 at acpi0: AMD2, resource for RP05
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
extent `acpipci0 pcibus' (0x0 - 0xff), flags=0
     0xff - 0xff
extent `acpipci0 pciio' (0x0 - 0xffffffff), flags=0
     0xcf8 - 0xcff
     0x10000 - 0xffffffff
extent `acpipci0 pcimem' (0x0 - 0xffffffffffffffff), flags=0
     0x0 - 0x9ffff
     0xc0000 - 0xaf9fffff
     0xfeb00000 - 0xffffffffffffffff
"CIND0C60" at acpi0 not configured
acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
"VPC2004" at acpi0 not configured
acpicmos0 at acpi0
"IDEA0102" at acpi0 not configured
"ETD0624" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200, 2000, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Conexant/0x510f
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 68:f7:28:39:b2:85
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
"Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 3
3:0:0: rom address conflict 0xfffe0000/0x20000
radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 8500M" rev 0x00
drm1 at radeondrm0
radeondrm0: msi
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0> naa.50014ee60528f927
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 4, firmware 0x594f03
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address e8:94:f6:10:a6:a2
ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo EasyCamera" rev 2.00/0.06 addr 4
video0 at uvideo0
ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev 1.10/0.01 addr 5
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
root on sd1a (5a23de4c02590db4.a) swap on sd1b dump on sd1b
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
[TTM] Memory type 2 has not been initialized
drm1 detached
radeondrm0 detached
"ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
uhidev0 at uhub0 port 1 configuration 1 interface 0 "A4Tech USB Mouse" rev 1.10/10.32 addr 6
uhidev0: iclass 3/1, 4 report ids
ums0 at uhidev0 reportid 1: 8 buttons, Z dir
wsmouse1 at ums0 mux 0
uhid0 at uhidev0 reportid 4: input=5, output=0, feature=0
wsmouse1 detached
ums0 detached
uhid0 detached
uhidev0 detached
syncing disks... done
rebooting...
OpenBSD 6.6-current (RAMDISK_CD) #601: Sat Feb  1 23:39:30 MST 2020
    [hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 8464887808 (8072MB)
avail mem = 8204320768 (7824MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
bios0: LENOVO 20351
acpi0 at bios0: ACPI 5.0
acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.90 MHz, 06-45-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP03)
acpiprt3 at acpi0: bus 2 (RP04)
acpiprt4 at acpi0: bus 3 (RP05)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiprt6 at acpi0: bus -1 (PEG1)
acpiprt7 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu at acpi0 not configured
acpipwrres at acpi0 not configured
acpipwrres at acpi0 not configured
"PNP0A08" at acpi0 not configured
"CIND0C60" at acpi0 not configured
"PNP0C0A" at acpi0 not configured
"VPC2004" at acpi0 not configured
acpicmos0 at acpi0
"IDEA0102" at acpi0 not configured
"ETD0624" at acpi0 not configured
"ACPI0003" at acpi0 not configured
"PNP0C0D" at acpi0 not configured
"PNP0C0C" at acpi0 not configured
cpu0: using Broadwell MDS workaround
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
wsdisplay1 at vga1 mux 1: console (80x25, vt100 emulation)
"Intel Core 4G HD Audio" rev 0x0b at pci0 dev 3 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
"Intel 8 Series HD Audio" rev 0x04 at pci0 dev 27 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 68:f7:28:39:b2:85
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
"Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 3
3:0:0: rom address conflict 0xfffe0000/0x20000
"ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
"Intel 8 Series LPC" rev 0x04 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0> naa.50014ee60528f927
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus0 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
"Intel 8 Series SMBus" rev 0x04 at pci0 dev 31 function 3 not configured
isa0 at mainbus0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay1
run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address e8:94:f6:10:a6:a2
"Generic USB2.0-CRW" rev 2.00/39.60 addr 3 at uhub0 port 4 not configured
"J58E8R30X Lenovo EasyCamera" rev 2.00/0.06 addr 4 at uhub0 port 6 not configured
"vendor 0x0cf3 product 0x3004" rev 1.10/0.01 addr 5 at uhub0 port 7 not configured
uhub2 at uhub1 port 1 configuration 1 interface 0 "vendor 0x8087 product 0x8000" rev 2.00/0.04 addr 2
softraid0 at root
scsibus1 at softraid0: 256 targets
sd1 at scsibus1 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
root on rd0a swap on rd0b dump on rd0b
syncing disks...
OpenBSD 6.6-current (GENERIC.MP) #628: Sat Feb  1 23:32:22 MST 2020
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8464887808 (8072MB)
avail mem = 8195870720 (7816MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
bios0: LENOVO 20351
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
acpi0: wakeup devices P0P1(S4) EHC1(S3) XHC_(S3) HDEF(S4) PXSX(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PEGP(S4) PEGA(S4) PXSX(S4) PXSX(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.88 MHz, 06-45-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP03)
acpiprt3 at acpi0: bus 2 (RP04)
acpiprt4 at acpi0: bus 3 (RP05)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiprt6 at acpi0: bus -1 (PEG1)
acpiprt7 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: AMD3, resource for RP05
acpipwrres1 at acpi0: AMD2, resource for RP05
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
"CIND0C60" at acpi0 not configured
acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
"VPC2004" at acpi0 not configured
acpicmos0 at acpi0
"IDEA0102" at acpi0 not configured
"ETD0624" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200, 2000, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Conexant/0x510f
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 68:f7:28:39:b2:85
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
"Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 3
3:0:0: rom address conflict 0xfffe0000/0x20000
radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 8500M" rev 0x00
drm1 at radeondrm0
radeondrm0: msi
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0> naa.50014ee60528f927
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 4, firmware 0x594f03
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address e8:94:f6:10:a6:a2
ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo EasyCamera" rev 2.00/0.06 addr 4
video0 at uvideo0
ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev 1.10/0.01 addr 5
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
root on sd1a (5a23de4c02590db4.a) swap on sd1b dump on sd1b
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
[TTM] Memory type 2 has not been initialized
drm1 detached
radeondrm0 detached
"ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
OpenBSD 6.6-current (GENERIC.MP) #628: Sat Feb  1 23:32:22 MST 2020
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8464887808 (8072MB)
avail mem = 8195850240 (7816MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
bios0: LENOVO 20351
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
acpi0: wakeup devices P0P1(S4) EHC1(S3) XHC_(S3) HDEF(S4) PXSX(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PEGP(S4) PEGA(S4) PXSX(S4) PXSX(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.94 MHz, 06-45-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.63 MHz, 06-45-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP03)
acpiprt3 at acpi0: bus 2 (RP04)
acpiprt4 at acpi0: bus 3 (RP05)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiprt6 at acpi0: bus -1 (PEG1)
acpiprt7 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: AMD3, resource for RP05
acpipwrres1 at acpi0: AMD2, resource for RP05
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
"CIND0C60" at acpi0 not configured
acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
"VPC2004" at acpi0 not configured
acpicmos0 at acpi0
"IDEA0102" at acpi0 not configured
"ETD0624" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200, 2000, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Conexant/0x510f
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 68:f7:28:39:b2:85
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
"Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 3
3:0:0: rom address conflict 0xfffe0000/0x20000
radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 8500M" rev 0x00
drm1 at radeondrm0
radeondrm0: msi
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0> naa.50014ee60528f927
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 4, firmware 0x594f03
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address e8:94:f6:10:a6:a2
ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo EasyCamera" rev 2.00/0.06 addr 4
video0 at uvideo0
ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev 1.10/0.01 addr 5
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
softraid0: sd1 was not shutdown properly
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
root on sd1a (5a23de4c02590db4.a) swap on sd1b dump on sd1b
WARNING: / was not properly unmounted
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
[TTM] Memory type 2 has not been initialized
drm1 detached
radeondrm0 detached
"ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
OpenBSD 6.6-current (GENERIC.MP) #628: Sat Feb  1 23:32:22 MST 2020
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 8464887808 (8072MB)
avail mem = 8195866624 (7816MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
bios0: LENOVO 20351
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
acpi0: wakeup devices P0P1(S4) EHC1(S3) XHC_(S3) HDEF(S4) PXSX(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PEGP(S4) PEGA(S4) PXSX(S4) PXSX(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.92 MHz, 06-45-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP03)
acpiprt3 at acpi0: bus 2 (RP04)
acpiprt4 at acpi0: bus 3 (RP05)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiprt6 at acpi0: bus -1 (PEG1)
acpiprt7 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: AMD3, resource for RP05
acpipwrres1 at acpi0: AMD2, resource for RP05
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
"CIND0C60" at acpi0 not configured
acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
"VPC2004" at acpi0 not configured
acpicmos0 at acpi0
"IDEA0102" at acpi0 not configured
"ETD0624" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200, 2000, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Conexant/0x510f
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 68:f7:28:39:b2:85
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
"Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 3
3:0:0: rom address conflict 0xfffe0000/0x20000
radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 8500M" rev 0x00
drm1 at radeondrm0
radeondrm0: msi
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0> naa.50014ee60528f927
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 4, firmware 0x594f03
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address e8:94:f6:10:a6:a2
ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo EasyCamera" rev 2.00/0.06 addr 4
video0 at uvideo0
ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev 1.10/0.01 addr 5
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
softraid0: sd1 was not shutdown properly
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
root on sd1a (5a23de4c02590db4.a) swap on sd1b dump on sd1b
WARNING: / was not properly unmounted
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
[TTM] Memory type 2 has not been initialized
drm1 detached
radeondrm0 detached
"ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
syncing disks... done
rebooting...
OpenBSD 6.6-current (GENERIC.MP) #6: Sun Feb  2 19:35:42 CET 2020
    [hidden email]:/sys/arch/amd64/compile/GENERIC.MP
real mem = 8464887808 (8072MB)
avail mem = 8195850240 (7816MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
bios0: LENOVO 20351
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
acpi0: wakeup devices P0P1(S4) EHC1(S3) XHC_(S3) HDEF(S4) PXSX(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PEGP(S4) PEGA(S4) PXSX(S4) PXSX(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.87 MHz, 06-45-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP03)
acpiprt3 at acpi0: bus 2 (RP04)
acpiprt4 at acpi0: bus 3 (RP05)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiprt6 at acpi0: bus -1 (PEG1)
acpiprt7 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: AMD3, resource for RP05
acpipwrres1 at acpi0: AMD2, resource for RP05
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
"CIND0C60" at acpi0 not configured
acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
"VPC2004" at acpi0 not configured
acpicmos0 at acpi0
"IDEA0102" at acpi0 not configured
"ETD0624" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200, 2000, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Conexant/0x510f
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 68:f7:28:39:b2:85
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
"Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 3
3:0:0: rom address conflict 0xfffe0000/0x20000
radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 8500M" rev 0x00
drm1 at radeondrm0
radeondrm0: msi
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0> naa.50014ee60528f927
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 4, firmware 0x594f03
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address e8:94:f6:10:a6:a2
ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo EasyCamera" rev 2.00/0.06 addr 4
video0 at uvideo0
ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev 1.10/0.01 addr 5
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
root on sd1a (5a23de4c02590db4.a) swap on sd1b dump on sd1b
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
[TTM] Memory type 2 has not been initialized
drm1 detached
radeondrm0 detached
"ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
syncing disks... done
rebooting...
OpenBSD 6.6-current (XHCI_DEBUG) #0: Sun Feb  2 23:55:04 CET 2020
    [hidden email]:/sys/arch/amd64/compile/XHCI_DEBUG
real mem = 8464887808 (8072MB)
avail mem = 8195846144 (7816MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xe6e40 (38 entries)
bios0: vendor LENOVO version "9ACN29WW" date 10/20/2014
bios0: LENOVO 20351
acpi0 at bios0: ACPI 5.0
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC UEFI FPDT POAT ASF! HPET APIC MCFG WDAT SSDT BOOT LPIT ASPT DBGP SSDT SSDT SSDT SSDT
acpi0: wakeup devices P0P1(S4) EHC1(S3) XHC_(S3) HDEF(S4) PXSX(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4) RP05(S4) PEGP(S4) PEGA(S4) PXSX(S4) PXSX(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.91 MHz, 06-45-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.63 MHz, 06-45-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-4510U CPU @ 2.00GHz, 1895.62 MHz, 06-45-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,PERF,ITSC,FSGSBASE,TSC_ADJUST,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MD_CLEAR,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 40 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 1 (RP03)
acpiprt3 at acpi0: bus 2 (RP04)
acpiprt4 at acpi0: bus 3 (RP05)
acpiprt5 at acpi0: bus -1 (PEG0)
acpiprt6 at acpi0: bus -1 (PEG1)
acpiprt7 at acpi0: bus -1 (PEG2)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@506 mwait.1@0x60), C2(200@148 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: AMD3, resource for RP05
acpipwrres1 at acpi0: AMD2, resource for RP05
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
"CIND0C60" at acpi0 not configured
acpibat0 at acpi0: BAT0 serial BAT20101001 oem "Lenovo IdeaPad"
"VPC2004" at acpi0 not configured
acpicmos0 at acpi0
"IDEA0102" at acpi0 not configured
"ETD0624" at acpi0 not configured
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PWRB
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 1895 MHz: speeds: 2601, 2600, 2500, 2300, 2200, 2000, 1900, 1800, 1600, 1500, 1400, 1200, 1100, 1000, 800, 754 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 4G Host" rev 0x0b
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x0b
drm0 at inteldrm0
inteldrm0: msi
azalia0 at pci0 dev 3 function 0 "Intel Core 4G HD Audio" rev 0x0b: msi
azalia0: No codecs found
xhci0 at pci0 dev 20 function 0 "Intel 8 Series xHCI" rev 0x04: msixhci0: waiting for BIOS to give up control
, xHCI 1.0
xhci0: CAPLENGTH=0x80
xhci0: DOORBELL=0x3000
xhci0: RUNTIME=0x2000
xhci0: 32 bytes context
xhci0: supported page size 0x00000001
xhci0: 13 ports and 32 slots
xhci0: 16 scratch pages, ETE=0, IST=0x4
xhci0: USB3PRM / USB3.0 configurable ports: 0x0000000f
xhci0: USB3_PSSEN / Enabled USB3.0 ports under xHCI: 0x0000000f
xhci0: XUSB2PRM / USB2.0 ports can switch from EHCI to xHCI:0x000001ff
xhci0: XUSB2PR / USB2.0 ports under xHCI: 0x000001ff
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
xhci0: DCBAAP=00xa5eb0000
xhci0: CRCR=00 (00000000a5eb1000)
xhci0: ERSTBA=00xa569f000
xhci0: ERDP=00xa5eb2000
xhci0: USBCMD=0x5
xhci0: IMAN=0x2
"Intel 8 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
azalia1 at pci0 dev 27 function 0 "Intel 8 Series HD Audio" rev 0x04: msi
azalia1: codecs: Conexant/0x510f
audio0 at azalia1
ppb0 at pci0 dev 28 function 0 "Intel 8 Series PCIE" rev 0xe4: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x10: RTL8168GU/8111GU (0x5080), msi, address 68:f7:28:39:b2:85
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
ppb1 at pci0 dev 28 function 3 "Intel 8 Series PCIE" rev 0xe4: msi
pci2 at ppb1 bus 2
"Atheros AR9565" rev 0x01 at pci2 dev 0 function 0 not configured
ppb2 at pci0 dev 28 function 4 "Intel 8 Series PCIE" rev 0xe4: msi
pci3 at ppb2 bus 3
3:0:0: rom address conflict 0xfffe0000/0x20000
radeondrm0 at pci3 dev 0 function 0 "ATI Radeon HD 8500M" rev 0x00
drm1 at radeondrm0
radeondrm0: msi
ehci0 at pci0 dev 29 function 0 "Intel 8 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel 8 Series LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 8 Series AHCI" rev 0x04: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD10JPCX-24U, 01.0> naa.50014ee60528f927
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 1 lun 0: <PLDS, DVD-RW DA8A6SH, GL61> removable
ichiic0 at pci0 dev 31 function 3 "Intel 8 Series SMBus" rev 0x04: apic 2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 4GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
pms0: Elantech Touchpad, version 4, firmware 0x594f03
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
xhci0: port=2 change=0x04
xhci0: port=4 change=0x10
xhci0: port=6 change=0x40
xhci0: port=7 change=0x80
xhci0: port=2 change=0x04
xhci0: xhci_cmd_slot_control
xhci0: dev 1, input=0xfffffd80a5efd000 slot=0xfffffd80a5efd020 ep0=0xfffffd80a5efd040
xhci0: dev 1, setting DCBAA to 0x00000000a5efe000
xhci_pipe_init: pipe=0xffff800000439000 addr=0 depth=1 port=2 speed=3 dev 1 dci 1 (epAddr=0x0)
xhci0: xhci_cmd_set_address BSR=1
xhci0: xhci_cmd_set_address BSR=0
xhci0: dev 1 addr 1
run0 at uhub0 port 2 configuration 1 interface 0 "Ralink 802.11 n WLAN" rev 2.00/1.01 addr 2
run0: MAC/BBP RT5592 (rev 0x0222), RF RT5592 (MIMO 2T2R), address e8:94:f6:10:a6:a2
xhci0: port=4 change=0x10
xhci0: xhci_cmd_slot_control
xhci0: dev 2, input=0xfffffd80a5f00000 slot=0xfffffd80a5f00020 ep0=0xfffffd80a5f00040
xhci0: dev 2, setting DCBAA to 0x00000000a5f01000
xhci_pipe_init: pipe=0xffff800000441000 addr=0 depth=1 port=4 speed=3 dev 2 dci 1 (epAddr=0x0)
xhci0: xhci_cmd_set_address BSR=1
xhci0: xhci_cmd_set_address BSR=0
xhci0: dev 2 addr 2
ugen0 at uhub0 port 4 "Generic USB2.0-CRW" rev 2.00/39.60 addr 3
xhci0: port=6 change=0x40
xhci0: xhci_cmd_slot_control
xhci0: dev 3, input=0xfffffd80a5f03000 slot=0xfffffd80a5f03020 ep0=0xfffffd80a5f03040
xhci0: dev 3, setting DCBAA to 0x00000000a5f04000
xhci_pipe_init: pipe=0xffff800000445000 addr=0 depth=1 port=6 speed=3 dev 3 dci 1 (epAddr=0x0)
xhci0: xhci_cmd_set_address BSR=1
xhci0: xhci_cmd_set_address BSR=0
xhci0: dev 3 addr 3
uvideo0 at uhub0 port 6 configuration 1 interface 0 "J58E8R30X Lenovo EasyCamera" rev 2.00/0.06 addr 4
video0 at uvideo0
xhci0: port=7 change=0x80
xhci0: xhci_cmd_slot_control
xhci0: dev 4, input=0xfffffd80a5f06000 slot=0xfffffd80a5f06020 ep0=0xfffffd80a5f06040
xhci0: dev 4, setting DCBAA to 0x00000000a5f07000
xhci_pipe_init: pipe=0xffff80000060a000 addr=0 depth=1 port=7 speed=2 dev 4 dci 1 (epAddr=0x0)
xhci0: xhci_cmd_set_address BSR=1
xhci0: xhci_cmd_set_address BSR=0
xhci0: dev 4 addr 4
ugen1 at uhub0 port 7 "Atheros Communications product 0x3004" rev 1.10/0.01 addr 5
uhub2 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub" rev 2.00/0.04 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006>
sd1: 953866MB, 512 bytes/sector, 1953519473 sectors
root on sd1a (5a23de4c02590db4.a) swap on sd1b dump on sd1b
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
initializing kernel modesetting (HAINAN 0x1002:0x666F 0x17AA:0x380C 0x00).
drm:pid0:si_init *ERROR* Expecting atombios for cayman GPU
drm:pid0:radeondrm_attachhook *ERROR* Fatal error during GPU init
[TTM] Memory type 2 has not been initialized
drm1 detached
radeondrm0 detached
"ATI Radeon HD 8500M" rev 0x00 at pci3 dev 0 function 0 not configured
xhci_pipe_init: pipe=0xffff8000003c0000 addr=2 depth=1 port=2 speed=3 dev 1 dci 2 (epAddr=0x1)
xhci0: xhci_cmd_configure_ep dev 1
xhci_pipe_init: pipe=0xffff800000cd2000 addr=2 depth=1 port=2 speed=3 dev 1 dci 4 (epAddr=0x2)
xhci0: xhci_cmd_configure_ep dev 1
xhci_pipe_init: pipe=0xffff800000cd4000 addr=2 depth=1 port=2 speed=3 dev 1 dci 6 (epAddr=0x3)
xhci0: xhci_cmd_configure_ep dev 1
xhci_pipe_init: pipe=0xffff800000cd6000 addr=2 depth=1 port=2 speed=3 dev 1 dci 8 (epAddr=0x4)
xhci0: xhci_cmd_configure_ep dev 1
xhci_pipe_init: pipe=0xffff800000cd7000 addr=2 depth=1 port=2 speed=3 dev 1 dci 3 (epAddr=0x81)
xhci0: xhci_cmd_configure_ep dev 1
xhci0: NULL xfer pointer
xhci0: NULL xfer pointer

Reply | Threaded
Open this post in threaded view
|

Re: xhci: KASSERT panic on USB run0 network load

Kenneth Westerback
On Mon, Feb 03, 2020 at 12:30:18AM +0100, Adam Wolk wrote:

> On Sun, Feb 02, 2020 at 04:06:38PM -0500, Kenneth Westerback wrote:
> > A kernel with XHCI_DEBUG may supply useful info.
> >
>
> I'm currently running with the XHCI_DEBUG enabled in the kernel.
> Attaching a dmesg and will report back if I manage to reproduce
> the issue on it.
>
> Look for:
>
> OpenBSD 6.6-current (XHCI_DEBUG) #0: Sun Feb  2 23:55:04 CET 2020
>     [hidden email]:/sys/arch/amd64/compile/XHCI_DEBUG
>
> in the trace below.
>
> Between the first two panics I had roughly 1h of usage. You can
> see that on the clock from ddb photos. I don't have a reliable
> way to reproduce however I wasn't able to trigger it with the xhci.c
> commit 1.111 reverted - had several hours of uptime with solid load.
>
> With the XHCI_DEBUG enabled I tried forcing the issue by generating load
> (large downloads, speedtests, running pkg_add and trying to load chrome
> with HD videos). No luck so far.
>
> > Testing the device on the EHCI port I see in your dmesg would also be
> > useful to confirm the problem is likely in xhci vs run.
> >
>
> I will attempt that if I manage to reproduce the issue one more time on
> the xhci port.
>
> > A quick test with an older run device plugged into my Lenovo e595 has not
> > panic'ed yet.
> >
> > Are you connecting to an ' N' access point or 'G', or ...
> >
>
> I am using the same setup on all reboots.
>
> Currently: IEEE802.11 autoselect (OFDM9 mode 11g)

I have scrounged two run(4) devices from the scrap heap and both fail
during a reposync. No panic, just "txerr? code=4" messages before they
cease to pass traffic. Both with 'G' and 'N'.

Unfortunately they fail the same way with or without r1.111. :-( So I
*suspect* this is a different problem than yours. But I will see if
any of my older machines have the same Intel xHCI interface as your
box and perhaps they will fail differently there. Tomorrow.

.... Ken

Reply | Threaded
Open this post in threaded view
|

Re: xhci: KASSERT panic on USB run0 network load

Kenneth Westerback
In reply to this post by Adam Wolk-2
On Mon, Feb 03, 2020 at 12:30:18AM +0100, Adam Wolk wrote:

> On Sun, Feb 02, 2020 at 04:06:38PM -0500, Kenneth Westerback wrote:
> > A kernel with XHCI_DEBUG may supply useful info.
> >
>
> I'm currently running with the XHCI_DEBUG enabled in the kernel.
> Attaching a dmesg and will report back if I manage to reproduce
> the issue on it.
>
> Look for:
>
> OpenBSD 6.6-current (XHCI_DEBUG) #0: Sun Feb  2 23:55:04 CET 2020
>     [hidden email]:/sys/arch/amd64/compile/XHCI_DEBUG
>
> in the trace below.
>
> Between the first two panics I had roughly 1h of usage. You can
> see that on the clock from ddb photos. I don't have a reliable
> way to reproduce however I wasn't able to trigger it with the xhci.c
> commit 1.111 reverted - had several hours of uptime with solid load.
>
> With the XHCI_DEBUG enabled I tried forcing the issue by generating load
> (large downloads, speedtests, running pkg_add and trying to load chrome
> with HD videos). No luck so far.
>
> > Testing the device on the EHCI port I see in your dmesg would also be
> > useful to confirm the problem is likely in xhci vs run.
> >
>
> I will attempt that if I manage to reproduce the issue one more time on
> the xhci port.
>
> > A quick test with an older run device plugged into my Lenovo e595 has not
> > panic'ed yet.
> >
> > Are you connecting to an ' N' access point or 'G', or ...
> >
>
> I am using the same setup on all reboots.
>
> Currently: IEEE802.11 autoselect (OFDM9 mode 11g)
>

Just a note ...

> xhci0: NULL xfer pointer
> xhci0: NULL xfer pointer

are 'normal' debug messages and not necessarily indicative of an error
condition.

.... Ken

Reply | Threaded
Open this post in threaded view
|

Re: xhci: KASSERT panic on USB run0 network load

Adam Wolk-2
In reply to this post by Kenneth Westerback
On Tue, Feb 04, 2020 at 03:19:17PM +1100, Kenneth R Westerback wrote:

> On Sun, Feb 02, 2020 at 10:19:44PM -0500, Kenneth R Westerback wrote:
> > On Mon, Feb 03, 2020 at 12:30:18AM +0100, Adam Wolk wrote:
> > > On Sun, Feb 02, 2020 at 04:06:38PM -0500, Kenneth Westerback wrote:
> > > > A kernel with XHCI_DEBUG may supply useful info.
> > > >
> > >
> > > I'm currently running with the XHCI_DEBUG enabled in the kernel.
> > > Attaching a dmesg and will report back if I manage to reproduce
> > > the issue on it.
> > >
> > > Look for:
> > >
> > > OpenBSD 6.6-current (XHCI_DEBUG) #0: Sun Feb  2 23:55:04 CET 2020
> > >     [hidden email]:/sys/arch/amd64/compile/XHCI_DEBUG
> > >
> > > in the trace below.
> > >
> > > Between the first two panics I had roughly 1h of usage. You can
> > > see that on the clock from ddb photos. I don't have a reliable
> > > way to reproduce however I wasn't able to trigger it with the xhci.c
> > > commit 1.111 reverted - had several hours of uptime with solid load.
> > >
> > > With the XHCI_DEBUG enabled I tried forcing the issue by generating load
> > > (large downloads, speedtests, running pkg_add and trying to load chrome
> > > with HD videos). No luck so far.
> > >
> > > > Testing the device on the EHCI port I see in your dmesg would also be
> > > > useful to confirm the problem is likely in xhci vs run.
> > > >
> > >
> > > I will attempt that if I manage to reproduce the issue one more time on
> > > the xhci port.
> > >
> > > > A quick test with an older run device plugged into my Lenovo e595 has not
> > > > panic'ed yet.
> > > >
> > > > Are you connecting to an ' N' access point or 'G', or ...
> > > >
> > >
> > > I am using the same setup on all reboots.
> > >
> > > Currently: IEEE802.11 autoselect (OFDM9 mode 11g)
> >
> > I have scrounged two run(4) devices from the scrap heap and both fail
> > during a reposync. No panic, just "txerr? code=4" messages before they
> > cease to pass traffic. Both with 'G' and 'N'.
> >
> > Unfortunately they fail the same way with or without r1.111. :-( So I
> > *suspect* this is a different problem than yours. But I will see if
> > any of my older machines have the same Intel xHCI interface as your
> > box and perhaps they will fail differently there. Tomorrow.
> >
> > .... Ken
>
> My x230 has Intel xHCI series 7. And the run(4) devices either work,
> or fail the same way as on the AMD xHCI in my E595.
>
> Amazon says they can't provide one of the devices you are
> using. Poking around to see if I can find one with at least the same
> chip inside.
>
> .... Ken

I have been running the same kernel (without any changes reverted) and
XHCI DEBUG on since the time of my last email.

I unfortunately wasn't able to reproduce the issue and it didn't happen
naturally so far.

I appreciate your help but I don't want to take more of your time
with an unreproducible bug. I will let you know as soon as I manage to
reproduce it and grab more data.

Regards,
Adam

Reply | Threaded
Open this post in threaded view
|

Re: xhci: KASSERT panic on USB run0 network load

Kenneth Westerback
On Thu, Feb 06, 2020 at 04:46:08PM +0100, Adam Wolk wrote:

> On Tue, Feb 04, 2020 at 03:19:17PM +1100, Kenneth R Westerback wrote:
> > On Sun, Feb 02, 2020 at 10:19:44PM -0500, Kenneth R Westerback wrote:
> > > On Mon, Feb 03, 2020 at 12:30:18AM +0100, Adam Wolk wrote:
> > > > On Sun, Feb 02, 2020 at 04:06:38PM -0500, Kenneth Westerback wrote:
> > > > > A kernel with XHCI_DEBUG may supply useful info.
> > > > >
> > > >
> > > > I'm currently running with the XHCI_DEBUG enabled in the kernel.
> > > > Attaching a dmesg and will report back if I manage to reproduce
> > > > the issue on it.
> > > >
> > > > Look for:
> > > >
> > > > OpenBSD 6.6-current (XHCI_DEBUG) #0: Sun Feb  2 23:55:04 CET 2020
> > > >     [hidden email]:/sys/arch/amd64/compile/XHCI_DEBUG
> > > >
> > > > in the trace below.
> > > >
> > > > Between the first two panics I had roughly 1h of usage. You can
> > > > see that on the clock from ddb photos. I don't have a reliable
> > > > way to reproduce however I wasn't able to trigger it with the xhci.c
> > > > commit 1.111 reverted - had several hours of uptime with solid load.
> > > >
> > > > With the XHCI_DEBUG enabled I tried forcing the issue by generating load
> > > > (large downloads, speedtests, running pkg_add and trying to load chrome
> > > > with HD videos). No luck so far.
> > > >
> > > > > Testing the device on the EHCI port I see in your dmesg would also be
> > > > > useful to confirm the problem is likely in xhci vs run.
> > > > >
> > > >
> > > > I will attempt that if I manage to reproduce the issue one more time on
> > > > the xhci port.
> > > >
> > > > > A quick test with an older run device plugged into my Lenovo e595 has not
> > > > > panic'ed yet.
> > > > >
> > > > > Are you connecting to an ' N' access point or 'G', or ...
> > > > >
> > > >
> > > > I am using the same setup on all reboots.
> > > >
> > > > Currently: IEEE802.11 autoselect (OFDM9 mode 11g)
> > >
> > > I have scrounged two run(4) devices from the scrap heap and both fail
> > > during a reposync. No panic, just "txerr? code=4" messages before they
> > > cease to pass traffic. Both with 'G' and 'N'.
> > >
> > > Unfortunately they fail the same way with or without r1.111. :-( So I
> > > *suspect* this is a different problem than yours. But I will see if
> > > any of my older machines have the same Intel xHCI interface as your
> > > box and perhaps they will fail differently there. Tomorrow.
> > >
> > > .... Ken
> >
> > My x230 has Intel xHCI series 7. And the run(4) devices either work,
> > or fail the same way as on the AMD xHCI in my E595.
> >
> > Amazon says they can't provide one of the devices you are
> > using. Poking around to see if I can find one with at least the same
> > chip inside.
> >
> > .... Ken
>
> I have been running the same kernel (without any changes reverted) and
> XHCI DEBUG on since the time of my last email.
>
> I unfortunately wasn't able to reproduce the issue and it didn't happen
> naturally so far.
>
> I appreciate your help but I don't want to take more of your time
> with an unreproducible bug. I will let you know as soon as I manage to
> reproduce it and grab more data.
>
> Regards,
> Adam

Noted. Thanks.

.... Ken