whats wrong with my iwi still ieee80211: nwid "" -50dBm

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

whats wrong with my iwi still ieee80211: nwid "" -50dBm

Jay Jesus Amorin
#dmesg

OpenBSD 4.0 (GENERIC) #1: Mon Mar 19 00:36:34 PHT 2007
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) M processor 1.50GHz ("GenuineIntel"
686-class) 1.50 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF
real mem  = 795308032 (776668K)
avail mem = 716935168 (700132K)
using 4256 buffers containing 39866368 bytes (38932K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(ff) BIOS, date 07/08/05, BIOS32 rev. 0 @
0xfd710, SMBIOS rev. 2.31 @ 0xdf010 (19 entries)
bios0: Hewlett-Packard Presario M2000 (PV328PA#UUF)
pcibios0 at bios0: rev 2.1 @ 0xfd710/0x8f0
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdf20/192 (10 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xf200! 0xcf800/0x1000 0xdf000/0x800! 0xe0000/0x4000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM/PM/GMS Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82915GM/GMS Video" rev 0x03:
aperture at 0xb0080000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82915GM/GMS Video" rev 0x03 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 3
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 3
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 4
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 3
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci1 at ppb0 bus 1
rl0 at pci1 dev 0 function 0 "Realtek 8139" rev 0x10: irq 10, address
00:c0:9f:90:0f:6f
rlphy0 at rl0 phy 0: RTL internal PHY
iwi0 at pci1 dev 6 function 0 "Intel PRO/Wireless 2200BG" rev 0x05:
irq 4, address 00:12:f0:c7:30:a9
cbb0 at pci1 dev 9 function 0 "TI PCI7XX1 CardBus" rev
0x00pci_intr_map: no mapping for pin A
: couldn't map interrupt
"TI PCI7XX1 FireWire" rev 0x00 at pci1 dev 9 function 2 not configured
"TI PCI7XX1 Flash" rev 0x00 at pci1 dev 9 function 3 not configured
sdhc0 at pci1 dev 9 function 4 "TI PCI7XX1 Secure Data" rev 0x00: irq 11
sdmmc0 at sdhc0
sdmmc1 at sdhc0
sdmmc2 at sdhc0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 5, ICH6 AC97
ac97: codec id 0x43585430 (Conexant CX?????)
ac97: codec features reserved, headphone, 18 bit DAC, 18 bit ADC, No 3D Stereo
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801FB IDE" rev 0x03: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHV2080AT>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: channel 1 ignored (disabled)
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 3
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask efdd netmask efdd ttymask ffdf
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
auich0: measured ac97 link rate at 48007 Hz, will use 48000 Hz
uhidev0 at uhub1 port 1 configuration 1 interface 0
uhidev0: Logitech USB-PS/2 Optical Mouse, rev 2.00/20.00, addr 2, iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
umass0 at uhub4 port 1 configuration 1 interface 0
umass0: vendor 0x0457 product 0x0151, rev 2.00/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets
sd0 at scsibus0 targ 1 lun 0: <USBest, USB2FlashStorage, 0.00> SCSI2
0/direct removable
sd0: 1000MB, 1000 cyl, 64 head, 32 sec, 512 bytes/sec, 2048000 sec total
umass0: at uhub4 port 1 (addr 2) disconnected
sd0 detached
scsibus0 detached
umass0 detached


ifconfig

lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33224
        groups: lo
        inet 127.0.0.1 netmask 0xff000000
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
rl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:c0:9f:90:0f:6f
        groups: egress
        media: Ethernet autoselect (100baseTX full-duplex)
        status: active
        inet6 fe80::2c0:9fff:fe90:f6f%rl0 prefixlen 64 scopeid 0x1
        inet 192.168.0.51 netmask 0xffffff00 broadcast 192.168.0.255
iwi0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:12:f0:c7:30:a9
        media: IEEE802.11 autoselect
        status: no network
        ieee80211: nwid my_net nwkey 0x1deadbeef1 -50dBm
        inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
        inet6 fe80::212:f0ff:fec7:30a9%iwi0 prefixlen 64 scopeid 0x2
pflog0: flags=0<> mtu 33224
pfsync0: flags=0<> mtu 1460
        groups: carp
enc0: flags=0<> mtu 1536


i've already install the iwi-firmware-3.0


ls -l /etc/firmware/iwi-*
-rwxr-xr-x  1 root  wheel  191142 Mar 26  2006 /etc/firmware/iwi-bss*
-rwxr-xr-x  1 root  wheel  185660 Mar 26  2006 /etc/firmware/iwi-ibss*
-rwxr-xr-x  1 root  wheel   12007 Mar 26  2006 /etc/firmware/iwi-license*
-rwxr-xr-x  1 root  wheel  187836 Mar 26  2006 /etc/firmware/iwi-monitor*

so frustrated with iwi, please help

--jay--

Reply | Threaded
Open this post in threaded view
|

Re: whats wrong with my iwi still ieee80211: nwid "" -50dBm

Kurt Miller-4
On Monday 19 March 2007 6:51:37 am Jay Jesus Amorin wrote:
> iwi0: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
>         lladdr 00:12:f0:c7:30:a9
>         media: IEEE802.11 autoselect
>         status: no network
>         ieee80211: nwid my_net nwkey 0x1deadbeef1 -50dBm
>         inet 192.168.1.1 netmask 0xffffff00 broadcast 192.168.1.255
>         inet6 fe80::212:f0ff:fec7:30a9%iwi0 prefixlen 64 scopeid 0x2

It not 'UP' but I doubt that's the problem. I've noticed
iwi has trouble after changing nwid and/or nwkey. Rebooting
works. This weekend I noticed an access point scan also seems
to kick the card into recognizing the changed values. Try:

ifconfig iwi0 up
ifconfig -M iwi0

-Kurt