vmctl status shows vm as stopped although running

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

vmctl status shows vm as stopped although running

Robert Paschedag
Hi misc,

I am running STABLE and just started testing running debian within vmd
and this works quite well right now.

Now I noticed, that vmctl status shows the vm as STOPPED, although it is
running.

I can connect to the console without problems. Is this status showing
some "other" status?

Thanks.
Robert

pasche@tux2:~$ vmctl status
    ID   PID VCPUS  MAXMEM  CURMEM     TTY        OWNER NAME
     1 10854     1    2.0G    217M   ttyp2       pasche debian
pasche@tux2:~$ vmctl status 1
    ID   PID VCPUS  MAXMEM  CURMEM     TTY        OWNER NAME
     1 10854     1    2.0G    217M   ttyp2       pasche debian
  VCPU:  0 STATE: STOPPED
pasche@tux2:~$ ps aux | grep vmd
_vmd     41407  0.0  0.0  1188  1756 ??  Ssp    2:16PM    0:00.01 vmd:
vmm (vmd)
root     79080  0.0  0.0  1112  1640 ??  Is     2:16PM    0:00.01 vmd:
priv (vmd)
_vmd     51293  0.0  0.0  1184  1732 ??  Ssp    2:16PM    0:00.01 vmd:
control (vmd)
root     82177  0.0  0.0  1364  1672 ??  Ssp    2:16PM    0:00.01
/usr/sbin/vmd
_vmd     10854  0.0  0.4 2099748 64808 ??  Ip     2:16PM    0:20.73 vmd:
debian (vmd)
pasche   24262  0.0  0.0   132   328 p1  R+/1   2:39PM    0:00.00 grep vmd
pasche@tux2:~$ vmctl console 1
Connected to /dev/ttyp2 (speed 115200)

Debian GNU/Linux 9 debian-vm ttyS0

debian-vm login:
[EOT]
pasche@tux2:~$


OpenBSD 6.2 (GENERIC.MP) #5: Fri Feb  2 23:02:19 CET 2018
 
[hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16708087808 (15934MB)
avail mem = 16194699264 (15444MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (68 entries)
bios0: vendor LENOVO version "HEET34WW (1.15 )" date 07/02/2013
bios0: LENOVO 68852HG
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT SSDT ASF! HPET APIC MCFG FPDT SSDT SSDT
UEFI UEFI POAT UEFI DBG2
acpi0: wakeup devices P0P1(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S3)
PXSX(S4) RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4)
PXSX(S4) RP05(S4) PXSX(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.51 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: TSC frequency 2594510480 Hz
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (P0P1)
acpiprt2 at acpi0: bus 3 (RP01)
acpiprt3 at acpi0: bus 4 (RP02)
acpiprt4 at acpi0: bus -1 (RP03)
acpiprt5 at acpi0: bus 5 (RP04)
acpiprt6 at acpi0: bus -1 (RP05)
acpiprt7 at acpi0: bus -1 (RP06)
acpiprt8 at acpi0: bus -1 (RP07)
acpiprt9 at acpi0: bus -1 (RP08)
acpiprt10 at acpi0: bus -1 (PEG0)
acpiprt11 at acpi0: bus -1 (PEG1)
acpiprt12 at acpi0: bus -1 (PEG2)
acpiprt13 at acpi0: bus -1 (PEG3)
acpiec0 at acpi0
acpicpu0 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 100 degC
"INT3F0D" at acpi0 not configured
acpithinkpad0 at acpi0
"PNP0C14" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "45N1045" serial    99 type LION oem "SMP"
acpiac0 at acpi0: AC unit offline
"PTL0001" at acpi0 not configured
"LEN2002" at acpi0 not configured
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID0
"INT340E" at acpi0 not configured
acpivideo0 at acpi0: VID_
acpivout at acpivideo0 not configured
cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300,
2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
drm0 at inteldrm0
inteldrm0: msi
inteldrm0: 1366x768, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
"Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
azalia0: codecs: Conexant CX20590, Intel/0x2806, using Conexant CX20590
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
pci1 at ppb0 bus 3
rtsx0 at pci1 dev 0 function 0 "Realtek RTS5229 Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit
ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
pci2 at ppb1 bus 4
iwn0 at pci2 dev 0 function 0 "Intel Centrino Wireless-N 2230" rev 0xc4:
msi, MIMO 2T2R, BGN, address 68:17:29:ec:ca:7f
ppb2 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi
pci3 at ppb2 bus 5
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL
(0x2c80), msi, address 28:d2:44:26:fa:e9
rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi,
AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 2: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Crucial_CT525MX3, M0C> SCSI3
0/direct fixed naa.500a075116e63f65
sd0: 500786MB, 512 bytes/sector, 1025610768 sectors, thin
cd0 at scsibus1 targ 2 lun 0: <HL-DT-ST, DVDRAM GU70N, LE20> ATAPI
5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic
2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch
fifo underrun on pch transcoder A
error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH
transcoder A FIFO underrun
uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
ugen0 at uhub3 port 3 "Intel product 0x07da" rev 2.00/78.69 addr 3
ugen1 at uhub3 port 4 "Validity Sensors VFS5011 Fingerprint Reader" rev
1.10/0.78 addr 4
uvideo0 at uhub3 port 6 configuration 1 interface 0 "Vimicro corp.
Integrated Camera" rev 2.00/39.89 addr 5
video0 at uvideo0
uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching
Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (142ebbf3d95f9810.a) swap on sd0b dump on sd0b

Reply | Threaded
Open this post in threaded view
|

Re: vmctl status shows vm as stopped although running

Carlos Cardenas
On Mon, Feb 19, 2018 at 02:40:47PM +0100, Robert Paschedag wrote:

> Hi misc,
>
> I am running STABLE and just started testing running debian within vmd and
> this works quite well right now.
>
> Now I noticed, that vmctl status shows the vm as STOPPED, although it is
> running.
>
> I can connect to the console without problems. Is this status showing some
> "other" status?
>
> Thanks.
> Robert

Quite of few bug fixes and enhancements to vmd occurred after 6.2 was released.

Is it possible to run your host with 6.2-current?

+--+
Carlos

Reply | Threaded
Open this post in threaded view
|

Re: vmctl status shows vm as stopped although running

Robert Paschedag
On 02/19/18 15:23, Carlos Cardenas wrote:

> On Mon, Feb 19, 2018 at 02:40:47PM +0100, Robert Paschedag wrote:
>> Hi misc,
>>
>> I am running STABLE and just started testing running debian within vmd and
>> this works quite well right now.
>>
>> Now I noticed, that vmctl status shows the vm as STOPPED, although it is
>> running.
>>
>> I can connect to the console without problems. Is this status showing some
>> "other" status?
>>
>> Thanks.
>> Robert
>
> Quite of few bug fixes and enhancements to vmd occurred after 6.2 was released.
>
> Is it possible to run your host with 6.2-current?
>
> +--+
> Carlos
>

Hi Carlos,

right now, I'm not able to upgrade to current. Sorry.

For now, I can live with that, because I start the vm manually. So I
know, it is running.

But I wanted to mention it. I'll try to upgrade when I have more time
left and will report.

Thanks.
Robert

Reply | Threaded
Open this post in threaded view
|

Re: vmctl status shows vm as stopped although running

Mike Larkin
In reply to this post by Robert Paschedag
On Mon, Feb 19, 2018 at 02:40:47PM +0100, Robert Paschedag wrote:

> Hi misc,
>
> I am running STABLE and just started testing running debian within vmd and
> this works quite well right now.
>
> Now I noticed, that vmctl status shows the vm as STOPPED, although it is
> running.
>
> I can connect to the console without problems. Is this status showing some
> "other" status?
>
> Thanks.
> Robert
>

An OS can spent a large amount of time "doing nothing" - eg, in it's idle loop.

What you are seeing is that your guest OS has executed a HLT instruction (likely
in that idle loop) and thus, vmd is not running at that precise instant in time
when you ran the command, because there is nothing to do.

I bet if you ran something that consumed guest CPU, and ran the same command,
you'd see something else.

-ml

> pasche@tux2:~$ vmctl status
>    ID   PID VCPUS  MAXMEM  CURMEM     TTY        OWNER NAME
>     1 10854     1    2.0G    217M   ttyp2       pasche debian
> pasche@tux2:~$ vmctl status 1
>    ID   PID VCPUS  MAXMEM  CURMEM     TTY        OWNER NAME
>     1 10854     1    2.0G    217M   ttyp2       pasche debian
>  VCPU:  0 STATE: STOPPED
> pasche@tux2:~$ ps aux | grep vmd
> _vmd     41407  0.0  0.0  1188  1756 ??  Ssp    2:16PM    0:00.01 vmd: vmm
> (vmd)
> root     79080  0.0  0.0  1112  1640 ??  Is     2:16PM    0:00.01 vmd: priv
> (vmd)
> _vmd     51293  0.0  0.0  1184  1732 ??  Ssp    2:16PM    0:00.01 vmd:
> control (vmd)
> root     82177  0.0  0.0  1364  1672 ??  Ssp    2:16PM    0:00.01
> /usr/sbin/vmd
> _vmd     10854  0.0  0.4 2099748 64808 ??  Ip     2:16PM    0:20.73 vmd:
> debian (vmd)
> pasche   24262  0.0  0.0   132   328 p1  R+/1   2:39PM    0:00.00 grep vmd
> pasche@tux2:~$ vmctl console 1
> Connected to /dev/ttyp2 (speed 115200)
>
> Debian GNU/Linux 9 debian-vm ttyS0
>
> debian-vm login:
> [EOT]
> pasche@tux2:~$
>
>
> OpenBSD 6.2 (GENERIC.MP) #5: Fri Feb  2 23:02:19 CET 2018
>
> [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 16708087808 (15934MB)
> avail mem = 16194699264 (15444MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (68 entries)
> bios0: vendor LENOVO version "HEET34WW (1.15 )" date 07/02/2013
> bios0: LENOVO 68852HG
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT SSDT ASF! HPET APIC MCFG FPDT SSDT SSDT UEFI
> UEFI POAT UEFI DBG2
> acpi0: wakeup devices P0P1(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S3) PXSX(S4)
> RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
> RP05(S4) PXSX(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.51 MHz
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: TSC frequency 2594510480 Hz
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 1, core 0, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz
> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 1, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz
> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 1, core 1, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (P0P1)
> acpiprt2 at acpi0: bus 3 (RP01)
> acpiprt3 at acpi0: bus 4 (RP02)
> acpiprt4 at acpi0: bus -1 (RP03)
> acpiprt5 at acpi0: bus 5 (RP04)
> acpiprt6 at acpi0: bus -1 (RP05)
> acpiprt7 at acpi0: bus -1 (RP06)
> acpiprt8 at acpi0: bus -1 (RP07)
> acpiprt9 at acpi0: bus -1 (RP08)
> acpiprt10 at acpi0: bus -1 (PEG0)
> acpiprt11 at acpi0: bus -1 (PEG1)
> acpiprt12 at acpi0: bus -1 (PEG2)
> acpiprt13 at acpi0: bus -1 (PEG3)
> acpiec0 at acpi0
> acpicpu0 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
> C1(1000@1 mwait.1), PSS
> acpitz0 at acpi0: critical temperature is 100 degC
> "INT3F0D" at acpi0 not configured
> acpithinkpad0 at acpi0
> "PNP0C14" at acpi0 not configured
> acpibat0 at acpi0: BAT0 model "45N1045" serial    99 type LION oem "SMP"
> acpiac0 at acpi0: AC unit offline
> "PTL0001" at acpi0 not configured
> "LEN2002" at acpi0 not configured
> acpibtn0 at acpi0: PWRB
> acpibtn1 at acpi0: LID0
> "INT340E" at acpi0 not configured
> acpivideo0 at acpi0: VID_
> acpivout at acpivideo0 not configured
> cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300,
> 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
> drm0 at inteldrm0
> inteldrm0: msi
> inteldrm0: 1366x768, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Conexant CX20590, Intel/0x2806, using Conexant CX20590
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> pci1 at ppb0 bus 3
> rtsx0 at pci1 dev 0 function 0 "Realtek RTS5229 Card Reader" rev 0x01: msi
> sdmmc0 at rtsx0: 4-bit
> ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
> pci2 at ppb1 bus 4
> iwn0 at pci2 dev 0 function 0 "Intel Centrino Wireless-N 2230" rev 0xc4:
> msi, MIMO 2T2R, BGN, address 68:17:29:ec:ca:7f
> ppb2 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi
> pci3 at ppb2 bus 5
> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL
> (0x2c80), msi, address 28:d2:44:26:fa:e9
> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> usb2 at ehci1: USB revision 2.0
> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI
> 1.3
> ahci0: port 0: 6.0Gb/s
> ahci0: port 2: 1.5Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, Crucial_CT525MX3, M0C> SCSI3 0/direct
> fixed naa.500a075116e63f65
> sd0: 500786MB, 512 bytes/sector, 1025610768 sectors, thin
> cd0 at scsibus1 targ 2 lun 0: <HL-DT-ST, DVDRAM GU70N, LE20> ATAPI 5/cdrom
> removable
> ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2
> int 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo
> underrun on pch transcoder A
> error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH transcoder
> A FIFO underrun
> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> ugen0 at uhub3 port 3 "Intel product 0x07da" rev 2.00/78.69 addr 3
> ugen1 at uhub3 port 4 "Validity Sensors VFS5011 Fingerprint Reader" rev
> 1.10/0.78 addr 4
> uvideo0 at uhub3 port 6 configuration 1 interface 0 "Vimicro corp.
> Integrated Camera" rev 2.00/39.89 addr 5
> video0 at uvideo0
> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> rev 2.00/0.00 addr 2
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (142ebbf3d95f9810.a) swap on sd0b dump on sd0b
>

Reply | Threaded
Open this post in threaded view
|

Re: vmctl status shows vm as stopped although running

Mike Larkin
On Mon, Feb 19, 2018 at 11:12:52AM -0800, Mike Larkin wrote:

> On Mon, Feb 19, 2018 at 02:40:47PM +0100, Robert Paschedag wrote:
> > Hi misc,
> >
> > I am running STABLE and just started testing running debian within vmd and
> > this works quite well right now.
> >
> > Now I noticed, that vmctl status shows the vm as STOPPED, although it is
> > running.
> >
> > I can connect to the console without problems. Is this status showing some
> > "other" status?
> >
> > Thanks.
> > Robert
> >
>
> An OS can spent a large amount of time "doing nothing" - eg, in it's idle loop.
>

What horrible English. This was written before coffee. "spend" and "its" are, of
course, what I meant to type there.

> What you are seeing is that your guest OS has executed a HLT instruction (likely
> in that idle loop) and thus, vmd is not running at that precise instant in time
> when you ran the command, because there is nothing to do.
>
> I bet if you ran something that consumed guest CPU, and ran the same command,
> you'd see something else.
>
> -ml
>
> > pasche@tux2:~$ vmctl status
> >    ID   PID VCPUS  MAXMEM  CURMEM     TTY        OWNER NAME
> >     1 10854     1    2.0G    217M   ttyp2       pasche debian
> > pasche@tux2:~$ vmctl status 1
> >    ID   PID VCPUS  MAXMEM  CURMEM     TTY        OWNER NAME
> >     1 10854     1    2.0G    217M   ttyp2       pasche debian
> >  VCPU:  0 STATE: STOPPED
> > pasche@tux2:~$ ps aux | grep vmd
> > _vmd     41407  0.0  0.0  1188  1756 ??  Ssp    2:16PM    0:00.01 vmd: vmm
> > (vmd)
> > root     79080  0.0  0.0  1112  1640 ??  Is     2:16PM    0:00.01 vmd: priv
> > (vmd)
> > _vmd     51293  0.0  0.0  1184  1732 ??  Ssp    2:16PM    0:00.01 vmd:
> > control (vmd)
> > root     82177  0.0  0.0  1364  1672 ??  Ssp    2:16PM    0:00.01
> > /usr/sbin/vmd
> > _vmd     10854  0.0  0.4 2099748 64808 ??  Ip     2:16PM    0:20.73 vmd:
> > debian (vmd)
> > pasche   24262  0.0  0.0   132   328 p1  R+/1   2:39PM    0:00.00 grep vmd
> > pasche@tux2:~$ vmctl console 1
> > Connected to /dev/ttyp2 (speed 115200)
> >
> > Debian GNU/Linux 9 debian-vm ttyS0
> >
> > debian-vm login:
> > [EOT]
> > pasche@tux2:~$
> >
> >
> > OpenBSD 6.2 (GENERIC.MP) #5: Fri Feb  2 23:02:19 CET 2018
> >
> > [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > real mem = 16708087808 (15934MB)
> > avail mem = 16194699264 (15444MB)
> > mpath0 at root
> > scsibus0 at mpath0: 256 targets
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (68 entries)
> > bios0: vendor LENOVO version "HEET34WW (1.15 )" date 07/02/2013
> > bios0: LENOVO 68852HG
> > acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S3 S4 S5
> > acpi0: tables DSDT FACP SSDT SSDT ASF! HPET APIC MCFG FPDT SSDT SSDT UEFI
> > UEFI POAT UEFI DBG2
> > acpi0: wakeup devices P0P1(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S3) PXSX(S4)
> > RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
> > RP05(S4) PXSX(S4) [...]
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpihpet0 at acpi0: 14318179 Hz
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.51 MHz
> > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> > cpu0: 256KB 64b/line 8-way L2 cache
> > cpu0: TSC frequency 2594510480 Hz
> > cpu0: smt 0, core 0, package 0
> > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> > cpu0: apic clock running at 99MHz
> > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
> > cpu1 at mainbus0: apid 1 (application processor)
> > cpu1: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz
> > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> > cpu1: 256KB 64b/line 8-way L2 cache
> > cpu1: smt 1, core 0, package 0
> > cpu2 at mainbus0: apid 2 (application processor)
> > cpu2: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz
> > cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> > cpu2: 256KB 64b/line 8-way L2 cache
> > cpu2: smt 0, core 1, package 0
> > cpu3 at mainbus0: apid 3 (application processor)
> > cpu3: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz
> > cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> > cpu3: 256KB 64b/line 8-way L2 cache
> > cpu3: smt 1, core 1, package 0
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus -1 (P0P1)
> > acpiprt2 at acpi0: bus 3 (RP01)
> > acpiprt3 at acpi0: bus 4 (RP02)
> > acpiprt4 at acpi0: bus -1 (RP03)
> > acpiprt5 at acpi0: bus 5 (RP04)
> > acpiprt6 at acpi0: bus -1 (RP05)
> > acpiprt7 at acpi0: bus -1 (RP06)
> > acpiprt8 at acpi0: bus -1 (RP07)
> > acpiprt9 at acpi0: bus -1 (RP08)
> > acpiprt10 at acpi0: bus -1 (PEG0)
> > acpiprt11 at acpi0: bus -1 (PEG1)
> > acpiprt12 at acpi0: bus -1 (PEG2)
> > acpiprt13 at acpi0: bus -1 (PEG3)
> > acpiec0 at acpi0
> > acpicpu0 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
> > C1(1000@1 mwait.1), PSS
> > acpicpu1 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
> > C1(1000@1 mwait.1), PSS
> > acpicpu2 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
> > C1(1000@1 mwait.1), PSS
> > acpicpu3 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
> > C1(1000@1 mwait.1), PSS
> > acpitz0 at acpi0: critical temperature is 100 degC
> > "INT3F0D" at acpi0 not configured
> > acpithinkpad0 at acpi0
> > "PNP0C14" at acpi0 not configured
> > acpibat0 at acpi0: BAT0 model "45N1045" serial    99 type LION oem "SMP"
> > acpiac0 at acpi0: AC unit offline
> > "PTL0001" at acpi0 not configured
> > "LEN2002" at acpi0 not configured
> > acpibtn0 at acpi0: PWRB
> > acpibtn1 at acpi0: LID0
> > "INT340E" at acpi0 not configured
> > acpivideo0 at acpi0: VID_
> > acpivout at acpivideo0 not configured
> > cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300,
> > 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
> > drm0 at inteldrm0
> > inteldrm0: msi
> > inteldrm0: 1366x768, 32bpp
> > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
> > usb0 at xhci0: USB revision 3.0
> > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> > 3.00/1.00 addr 1
> > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
> > usb1 at ehci0: USB revision 2.0
> > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> > 2.00/1.00 addr 1
> > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> > azalia0: codecs: Conexant CX20590, Intel/0x2806, using Conexant CX20590
> > audio0 at azalia0
> > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> > pci1 at ppb0 bus 3
> > rtsx0 at pci1 dev 0 function 0 "Realtek RTS5229 Card Reader" rev 0x01: msi
> > sdmmc0 at rtsx0: 4-bit
> > ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
> > pci2 at ppb1 bus 4
> > iwn0 at pci2 dev 0 function 0 "Intel Centrino Wireless-N 2230" rev 0xc4:
> > msi, MIMO 2T2R, BGN, address 68:17:29:ec:ca:7f
> > ppb2 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi
> > pci3 at ppb2 bus 5
> > re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL
> > (0x2c80), msi, address 28:d2:44:26:fa:e9
> > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
> > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> > usb2 at ehci1: USB revision 2.0
> > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> > 2.00/1.00 addr 1
> > pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04
> > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI
> > 1.3
> > ahci0: port 0: 6.0Gb/s
> > ahci0: port 2: 1.5Gb/s
> > scsibus1 at ahci0: 32 targets
> > sd0 at scsibus1 targ 0 lun 0: <ATA, Crucial_CT525MX3, M0C> SCSI3 0/direct
> > fixed naa.500a075116e63f65
> > sd0: 500786MB, 512 bytes/sector, 1025610768 sectors, thin
> > cd0 at scsibus1 targ 2 lun 0: <HL-DT-ST, DVDRAM GU70N, LE20> ATAPI 5/cdrom
> > removable
> > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2
> > int 18
> > iic0 at ichiic0
> > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> > spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > pckbd0 at pckbc0 (kbd slot)
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > wsmouse0 at pms0 mux 0
> > wsmouse1 at pms0 mux 0
> > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > vmm0 at mainbus0: VMX/EPT
> > error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo
> > underrun on pch transcoder A
> > error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH transcoder
> > A FIFO underrun
> > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> > rev 2.00/0.00 addr 2
> > ugen0 at uhub3 port 3 "Intel product 0x07da" rev 2.00/78.69 addr 3
> > ugen1 at uhub3 port 4 "Validity Sensors VFS5011 Fingerprint Reader" rev
> > 1.10/0.78 addr 4
> > uvideo0 at uhub3 port 6 configuration 1 interface 0 "Vimicro corp.
> > Integrated Camera" rev 2.00/39.89 addr 5
> > video0 at uvideo0
> > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> > rev 2.00/0.00 addr 2
> > vscsi0 at root
> > scsibus2 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus3 at softraid0: 256 targets
> > root on sd0a (142ebbf3d95f9810.a) swap on sd0b dump on sd0b
> >
>

Reply | Threaded
Open this post in threaded view
|

Re: vmctl status shows vm as stopped although running

Mike Larkin
On Mon, Feb 19, 2018 at 11:21:09AM -0800, Mike Larkin wrote:

> On Mon, Feb 19, 2018 at 11:12:52AM -0800, Mike Larkin wrote:
> > On Mon, Feb 19, 2018 at 02:40:47PM +0100, Robert Paschedag wrote:
> > > Hi misc,
> > >
> > > I am running STABLE and just started testing running debian within vmd and
> > > this works quite well right now.
> > >
> > > Now I noticed, that vmctl status shows the vm as STOPPED, although it is
> > > running.
> > >
> > > I can connect to the console without problems. Is this status showing some
> > > "other" status?
> > >
> > > Thanks.
> > > Robert
> > >
> >
> > An OS can spent a large amount of time "doing nothing" - eg, in it's idle loop.
> >
>
> What horrible English. This was written before coffee. "spend" and "its" are, of
> course, what I meant to type there.

gotta love Mondays when your correction itself is wrong. time for coffee.


>
> > What you are seeing is that your guest OS has executed a HLT instruction (likely
> > in that idle loop) and thus, vmd is not running at that precise instant in time
> > when you ran the command, because there is nothing to do.
> >
> > I bet if you ran something that consumed guest CPU, and ran the same command,
> > you'd see something else.
> >
> > -ml
> >
> > > pasche@tux2:~$ vmctl status
> > >    ID   PID VCPUS  MAXMEM  CURMEM     TTY        OWNER NAME
> > >     1 10854     1    2.0G    217M   ttyp2       pasche debian
> > > pasche@tux2:~$ vmctl status 1
> > >    ID   PID VCPUS  MAXMEM  CURMEM     TTY        OWNER NAME
> > >     1 10854     1    2.0G    217M   ttyp2       pasche debian
> > >  VCPU:  0 STATE: STOPPED
> > > pasche@tux2:~$ ps aux | grep vmd
> > > _vmd     41407  0.0  0.0  1188  1756 ??  Ssp    2:16PM    0:00.01 vmd: vmm
> > > (vmd)
> > > root     79080  0.0  0.0  1112  1640 ??  Is     2:16PM    0:00.01 vmd: priv
> > > (vmd)
> > > _vmd     51293  0.0  0.0  1184  1732 ??  Ssp    2:16PM    0:00.01 vmd:
> > > control (vmd)
> > > root     82177  0.0  0.0  1364  1672 ??  Ssp    2:16PM    0:00.01
> > > /usr/sbin/vmd
> > > _vmd     10854  0.0  0.4 2099748 64808 ??  Ip     2:16PM    0:20.73 vmd:
> > > debian (vmd)
> > > pasche   24262  0.0  0.0   132   328 p1  R+/1   2:39PM    0:00.00 grep vmd
> > > pasche@tux2:~$ vmctl console 1
> > > Connected to /dev/ttyp2 (speed 115200)
> > >
> > > Debian GNU/Linux 9 debian-vm ttyS0
> > >
> > > debian-vm login:
> > > [EOT]
> > > pasche@tux2:~$
> > >
> > >
> > > OpenBSD 6.2 (GENERIC.MP) #5: Fri Feb  2 23:02:19 CET 2018
> > >
> > > [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > > real mem = 16708087808 (15934MB)
> > > avail mem = 16194699264 (15444MB)
> > > mpath0 at root
> > > scsibus0 at mpath0: 256 targets
> > > mainbus0 at root
> > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (68 entries)
> > > bios0: vendor LENOVO version "HEET34WW (1.15 )" date 07/02/2013
> > > bios0: LENOVO 68852HG
> > > acpi0 at bios0: rev 2
> > > acpi0: sleep states S0 S3 S4 S5
> > > acpi0: tables DSDT FACP SSDT SSDT ASF! HPET APIC MCFG FPDT SSDT SSDT UEFI
> > > UEFI POAT UEFI DBG2
> > > acpi0: wakeup devices P0P1(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S3) PXSX(S4)
> > > RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
> > > RP05(S4) PXSX(S4) [...]
> > > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > > acpihpet0 at acpi0: 14318179 Hz
> > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > > cpu0 at mainbus0: apid 0 (boot processor)
> > > cpu0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.51 MHz
> > > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> > > cpu0: 256KB 64b/line 8-way L2 cache
> > > cpu0: TSC frequency 2594510480 Hz
> > > cpu0: smt 0, core 0, package 0
> > > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> > > cpu0: apic clock running at 99MHz
> > > cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
> > > cpu1 at mainbus0: apid 1 (application processor)
> > > cpu1: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz
> > > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> > > cpu1: 256KB 64b/line 8-way L2 cache
> > > cpu1: smt 1, core 0, package 0
> > > cpu2 at mainbus0: apid 2 (application processor)
> > > cpu2: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz
> > > cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> > > cpu2: 256KB 64b/line 8-way L2 cache
> > > cpu2: smt 0, core 1, package 0
> > > cpu3 at mainbus0: apid 3 (application processor)
> > > cpu3: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz
> > > cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
> > > cpu3: 256KB 64b/line 8-way L2 cache
> > > cpu3: smt 1, core 1, package 0
> > > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > > acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> > > acpiprt0 at acpi0: bus 0 (PCI0)
> > > acpiprt1 at acpi0: bus -1 (P0P1)
> > > acpiprt2 at acpi0: bus 3 (RP01)
> > > acpiprt3 at acpi0: bus 4 (RP02)
> > > acpiprt4 at acpi0: bus -1 (RP03)
> > > acpiprt5 at acpi0: bus 5 (RP04)
> > > acpiprt6 at acpi0: bus -1 (RP05)
> > > acpiprt7 at acpi0: bus -1 (RP06)
> > > acpiprt8 at acpi0: bus -1 (RP07)
> > > acpiprt9 at acpi0: bus -1 (RP08)
> > > acpiprt10 at acpi0: bus -1 (PEG0)
> > > acpiprt11 at acpi0: bus -1 (PEG1)
> > > acpiprt12 at acpi0: bus -1 (PEG2)
> > > acpiprt13 at acpi0: bus -1 (PEG3)
> > > acpiec0 at acpi0
> > > acpicpu0 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
> > > C1(1000@1 mwait.1), PSS
> > > acpicpu1 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
> > > C1(1000@1 mwait.1), PSS
> > > acpicpu2 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
> > > C1(1000@1 mwait.1), PSS
> > > acpicpu3 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
> > > C1(1000@1 mwait.1), PSS
> > > acpitz0 at acpi0: critical temperature is 100 degC
> > > "INT3F0D" at acpi0 not configured
> > > acpithinkpad0 at acpi0
> > > "PNP0C14" at acpi0 not configured
> > > acpibat0 at acpi0: BAT0 model "45N1045" serial    99 type LION oem "SMP"
> > > acpiac0 at acpi0: AC unit offline
> > > "PTL0001" at acpi0 not configured
> > > "LEN2002" at acpi0 not configured
> > > acpibtn0 at acpi0: PWRB
> > > acpibtn1 at acpi0: LID0
> > > "INT340E" at acpi0 not configured
> > > acpivideo0 at acpi0: VID_
> > > acpivout at acpivideo0 not configured
> > > cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300,
> > > 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
> > > pci0 at mainbus0 bus 0
> > > pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
> > > inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
> > > drm0 at inteldrm0
> > > inteldrm0: msi
> > > inteldrm0: 1366x768, 32bpp
> > > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> > > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > > xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
> > > usb0 at xhci0: USB revision 3.0
> > > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> > > 3.00/1.00 addr 1
> > > "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> > > ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
> > > usb1 at ehci0: USB revision 2.0
> > > uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
> > > 2.00/1.00 addr 1
> > > azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
> > > azalia0: codecs: Conexant CX20590, Intel/0x2806, using Conexant CX20590
> > > audio0 at azalia0
> > > ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
> > > pci1 at ppb0 bus 3
> > > rtsx0 at pci1 dev 0 function 0 "Realtek RTS5229 Card Reader" rev 0x01: msi
> > > sdmmc0 at rtsx0: 4-bit
> > > ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
> > > pci2 at ppb1 bus 4
> > > iwn0 at pci2 dev 0 function 0 "Intel Centrino Wireless-N 2230" rev 0xc4:
> > > msi, MIMO 2T2R, BGN, address 68:17:29:ec:ca:7f
> > > ppb2 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi
> > > pci3 at ppb2 bus 5
> > > re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL
> > > (0x2c80), msi, address 28:d2:44:26:fa:e9
> > > rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
> > > ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
> > > usb2 at ehci1: USB revision 2.0
> > > uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
> > > 2.00/1.00 addr 1
> > > pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04
> > > ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI
> > > 1.3
> > > ahci0: port 0: 6.0Gb/s
> > > ahci0: port 2: 1.5Gb/s
> > > scsibus1 at ahci0: 32 targets
> > > sd0 at scsibus1 targ 0 lun 0: <ATA, Crucial_CT525MX3, M0C> SCSI3 0/direct
> > > fixed naa.500a075116e63f65
> > > sd0: 500786MB, 512 bytes/sector, 1025610768 sectors, thin
> > > cd0 at scsibus1 targ 2 lun 0: <HL-DT-ST, DVDRAM GU70N, LE20> ATAPI 5/cdrom
> > > removable
> > > ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2
> > > int 18
> > > iic0 at ichiic0
> > > spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> > > spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
> > > isa0 at pcib0
> > > isadma0 at isa0
> > > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > > pckbd0 at pckbc0 (kbd slot)
> > > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > > pms0 at pckbc0 (aux slot)
> > > wsmouse0 at pms0 mux 0
> > > wsmouse1 at pms0 mux 0
> > > pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300
> > > pcppi0 at isa0 port 0x61
> > > spkr0 at pcppi0
> > > vmm0 at mainbus0: VMX/EPT
> > > error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo
> > > underrun on pch transcoder A
> > > error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH transcoder
> > > A FIFO underrun
> > > uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> > > rev 2.00/0.00 addr 2
> > > ugen0 at uhub3 port 3 "Intel product 0x07da" rev 2.00/78.69 addr 3
> > > ugen1 at uhub3 port 4 "Validity Sensors VFS5011 Fingerprint Reader" rev
> > > 1.10/0.78 addr 4
> > > uvideo0 at uhub3 port 6 configuration 1 interface 0 "Vimicro corp.
> > > Integrated Camera" rev 2.00/39.89 addr 5
> > > video0 at uvideo0
> > > uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
> > > rev 2.00/0.00 addr 2
> > > vscsi0 at root
> > > scsibus2 at vscsi0: 256 targets
> > > softraid0 at root
> > > scsibus3 at softraid0: 256 targets
> > > root on sd0a (142ebbf3d95f9810.a) swap on sd0b dump on sd0b
> > >
> >
>

Reply | Threaded
Open this post in threaded view
|

Re: vmctl status shows vm as stopped although running

Robert Paschedag
On 02/19/18 20:22, Mike Larkin wrote:

> On Mon, Feb 19, 2018 at 11:21:09AM -0800, Mike Larkin wrote:
>> On Mon, Feb 19, 2018 at 11:12:52AM -0800, Mike Larkin wrote:
>>> On Mon, Feb 19, 2018 at 02:40:47PM +0100, Robert Paschedag wrote:
>>>> Hi misc,
>>>>
>>>> I am running STABLE and just started testing running debian within vmd and
>>>> this works quite well right now.
>>>>
>>>> Now I noticed, that vmctl status shows the vm as STOPPED, although it is
>>>> running.
>>>>
>>>> I can connect to the console without problems. Is this status showing some
>>>> "other" status?
>>>>
>>>> Thanks.
>>>> Robert
>>>>
>>>
>>> An OS can spent a large amount of time "doing nothing" - eg, in it's idle loop.
>>>
>>
>> What horrible English. This was written before coffee. "spend" and "its" are, of
>> course, what I meant to type there.
>
> gotta love Mondays when your correction itself is wrong. time for coffee.
>
>
>>
>>> What you are seeing is that your guest OS has executed a HLT instruction (likely
>>> in that idle loop) and thus, vmd is not running at that precise instant in time
>>> when you ran the command, because there is nothing to do.
>>>
>>> I bet if you ran something that consumed guest CPU, and ran the same command,
>>> you'd see something else.
>>>
>>> -ml
>>>

Hi Mike,

thanks. It's exactly how to told me. So the "status" is just showing the
current state of the guest CPUs.

I expected the "status" to show, if this specific vm is "powered on" or
not, in case you have several vms defined.

But ok...now I know, what "status" shows me, I'm happy.

Robert


>>>> pasche@tux2:~$ vmctl status
>>>>     ID   PID VCPUS  MAXMEM  CURMEM     TTY        OWNER NAME
>>>>      1 10854     1    2.0G    217M   ttyp2       pasche debian
>>>> pasche@tux2:~$ vmctl status 1
>>>>     ID   PID VCPUS  MAXMEM  CURMEM     TTY        OWNER NAME
>>>>      1 10854     1    2.0G    217M   ttyp2       pasche debian
>>>>   VCPU:  0 STATE: STOPPED
>>>> pasche@tux2:~$ ps aux | grep vmd
>>>> _vmd     41407  0.0  0.0  1188  1756 ??  Ssp    2:16PM    0:00.01 vmd: vmm
>>>> (vmd)
>>>> root     79080  0.0  0.0  1112  1640 ??  Is     2:16PM    0:00.01 vmd: priv
>>>> (vmd)
>>>> _vmd     51293  0.0  0.0  1184  1732 ??  Ssp    2:16PM    0:00.01 vmd:
>>>> control (vmd)
>>>> root     82177  0.0  0.0  1364  1672 ??  Ssp    2:16PM    0:00.01
>>>> /usr/sbin/vmd
>>>> _vmd     10854  0.0  0.4 2099748 64808 ??  Ip     2:16PM    0:20.73 vmd:
>>>> debian (vmd)
>>>> pasche   24262  0.0  0.0   132   328 p1  R+/1   2:39PM    0:00.00 grep vmd
>>>> pasche@tux2:~$ vmctl console 1
>>>> Connected to /dev/ttyp2 (speed 115200)
>>>>
>>>> Debian GNU/Linux 9 debian-vm ttyS0
>>>>
>>>> debian-vm login:
>>>> [EOT]
>>>> pasche@tux2:~$
>>>>
>>>>
>>>> OpenBSD 6.2 (GENERIC.MP) #5: Fri Feb  2 23:02:19 CET 2018
>>>>
>>>> [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
>>>> real mem = 16708087808 (15934MB)
>>>> avail mem = 16194699264 (15444MB)
>>>> mpath0 at root
>>>> scsibus0 at mpath0: 256 targets
>>>> mainbus0 at root
>>>> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdae9d000 (68 entries)
>>>> bios0: vendor LENOVO version "HEET34WW (1.15 )" date 07/02/2013
>>>> bios0: LENOVO 68852HG
>>>> acpi0 at bios0: rev 2
>>>> acpi0: sleep states S0 S3 S4 S5
>>>> acpi0: tables DSDT FACP SSDT SSDT ASF! HPET APIC MCFG FPDT SSDT SSDT UEFI
>>>> UEFI POAT UEFI DBG2
>>>> acpi0: wakeup devices P0P1(S4) EHC1(S3) EHC2(S3) XHC_(S3) HDEF(S3) PXSX(S4)
>>>> RP01(S4) PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) PXSX(S4) RP04(S4) PXSX(S4)
>>>> RP05(S4) PXSX(S4) [...]
>>>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>>>> acpihpet0 at acpi0: 14318179 Hz
>>>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>>>> cpu0 at mainbus0: apid 0 (boot processor)
>>>> cpu0: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.51 MHz
>>>> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
>>>> cpu0: 256KB 64b/line 8-way L2 cache
>>>> cpu0: TSC frequency 2594510480 Hz
>>>> cpu0: smt 0, core 0, package 0
>>>> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
>>>> cpu0: apic clock running at 99MHz
>>>> cpu0: mwait min=64, max=64, C-substates=0.2.1.1.2, IBE
>>>> cpu1 at mainbus0: apid 1 (application processor)
>>>> cpu1: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz
>>>> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
>>>> cpu1: 256KB 64b/line 8-way L2 cache
>>>> cpu1: smt 1, core 0, package 0
>>>> cpu2 at mainbus0: apid 2 (application processor)
>>>> cpu2: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz
>>>> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
>>>> cpu2: 256KB 64b/line 8-way L2 cache
>>>> cpu2: smt 0, core 1, package 0
>>>> cpu3 at mainbus0: apid 3 (application processor)
>>>> cpu3: Intel(R) Core(TM) i5-3230M CPU @ 2.60GHz, 2594.10 MHz
>>>> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,RDTSCP,LONG,LAHF,PERF,ITSC,FSGSBASE,SMEP,ERMS,SENSOR,ARAT
>>>> cpu3: 256KB 64b/line 8-way L2 cache
>>>> cpu3: smt 1, core 1, package 0
>>>> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
>>>> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
>>>> acpiprt0 at acpi0: bus 0 (PCI0)
>>>> acpiprt1 at acpi0: bus -1 (P0P1)
>>>> acpiprt2 at acpi0: bus 3 (RP01)
>>>> acpiprt3 at acpi0: bus 4 (RP02)
>>>> acpiprt4 at acpi0: bus -1 (RP03)
>>>> acpiprt5 at acpi0: bus 5 (RP04)
>>>> acpiprt6 at acpi0: bus -1 (RP05)
>>>> acpiprt7 at acpi0: bus -1 (RP06)
>>>> acpiprt8 at acpi0: bus -1 (RP07)
>>>> acpiprt9 at acpi0: bus -1 (RP08)
>>>> acpiprt10 at acpi0: bus -1 (PEG0)
>>>> acpiprt11 at acpi0: bus -1 (PEG1)
>>>> acpiprt12 at acpi0: bus -1 (PEG2)
>>>> acpiprt13 at acpi0: bus -1 (PEG3)
>>>> acpiec0 at acpi0
>>>> acpicpu0 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
>>>> C1(1000@1 mwait.1), PSS
>>>> acpicpu1 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
>>>> C1(1000@1 mwait.1), PSS
>>>> acpicpu2 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
>>>> C1(1000@1 mwait.1), PSS
>>>> acpicpu3 at acpi0: C3(200@87 mwait.1@0x30), C2(500@59 mwait.1@0x10),
>>>> C1(1000@1 mwait.1), PSS
>>>> acpitz0 at acpi0: critical temperature is 100 degC
>>>> "INT3F0D" at acpi0 not configured
>>>> acpithinkpad0 at acpi0
>>>> "PNP0C14" at acpi0 not configured
>>>> acpibat0 at acpi0: BAT0 model "45N1045" serial    99 type LION oem "SMP"
>>>> acpiac0 at acpi0: AC unit offline
>>>> "PTL0001" at acpi0 not configured
>>>> "LEN2002" at acpi0 not configured
>>>> acpibtn0 at acpi0: PWRB
>>>> acpibtn1 at acpi0: LID0
>>>> "INT340E" at acpi0 not configured
>>>> acpivideo0 at acpi0: VID_
>>>> acpivout at acpivideo0 not configured
>>>> cpu0: Enhanced SpeedStep 2594 MHz: speeds: 2601, 2600, 2500, 2400, 2300,
>>>> 2200, 2100, 2000, 1900, 1800, 1700, 1600, 1500, 1400, 1300, 1200 MHz
>>>> pci0 at mainbus0 bus 0
>>>> pchb0 at pci0 dev 0 function 0 "Intel Core 3G Host" rev 0x09
>>>> inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 4000" rev 0x09
>>>> drm0 at inteldrm0
>>>> inteldrm0: msi
>>>> inteldrm0: 1366x768, 32bpp
>>>> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
>>>> wsdisplay0: screen 1-5 added (std, vt100 emulation)
>>>> xhci0 at pci0 dev 20 function 0 "Intel 7 Series xHCI" rev 0x04: msi
>>>> usb0 at xhci0: USB revision 3.0
>>>> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
>>>> 3.00/1.00 addr 1
>>>> "Intel 7 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
>>>> ehci0 at pci0 dev 26 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 16
>>>> usb1 at ehci0: USB revision 2.0
>>>> uhub1 at usb1 configuration 1 interface 0 "Intel EHCI root hub" rev
>>>> 2.00/1.00 addr 1
>>>> azalia0 at pci0 dev 27 function 0 "Intel 7 Series HD Audio" rev 0x04: msi
>>>> azalia0: codecs: Conexant CX20590, Intel/0x2806, using Conexant CX20590
>>>> audio0 at azalia0
>>>> ppb0 at pci0 dev 28 function 0 "Intel 7 Series PCIE" rev 0xc4: msi
>>>> pci1 at ppb0 bus 3
>>>> rtsx0 at pci1 dev 0 function 0 "Realtek RTS5229 Card Reader" rev 0x01: msi
>>>> sdmmc0 at rtsx0: 4-bit
>>>> ppb1 at pci0 dev 28 function 1 "Intel 7 Series PCIE" rev 0xc4: msi
>>>> pci2 at ppb1 bus 4
>>>> iwn0 at pci2 dev 0 function 0 "Intel Centrino Wireless-N 2230" rev 0xc4:
>>>> msi, MIMO 2T2R, BGN, address 68:17:29:ec:ca:7f
>>>> ppb2 at pci0 dev 28 function 3 "Intel 7 Series PCIE" rev 0xc4: msi
>>>> pci3 at ppb2 bus 5
>>>> re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x07: RTL8168E/8111E-VL
>>>> (0x2c80), msi, address 28:d2:44:26:fa:e9
>>>> rgephy0 at re0 phy 7: RTL8169S/8110S/8211 PHY, rev. 5
>>>> ehci1 at pci0 dev 29 function 0 "Intel 7 Series USB" rev 0x04: apic 2 int 23
>>>> usb2 at ehci1: USB revision 2.0
>>>> uhub2 at usb2 configuration 1 interface 0 "Intel EHCI root hub" rev
>>>> 2.00/1.00 addr 1
>>>> pcib0 at pci0 dev 31 function 0 "Intel HM77 LPC" rev 0x04
>>>> ahci0 at pci0 dev 31 function 2 "Intel 7 Series AHCI" rev 0x04: msi, AHCI
>>>> 1.3
>>>> ahci0: port 0: 6.0Gb/s
>>>> ahci0: port 2: 1.5Gb/s
>>>> scsibus1 at ahci0: 32 targets
>>>> sd0 at scsibus1 targ 0 lun 0: <ATA, Crucial_CT525MX3, M0C> SCSI3 0/direct
>>>> fixed naa.500a075116e63f65
>>>> sd0: 500786MB, 512 bytes/sector, 1025610768 sectors, thin
>>>> cd0 at scsibus1 targ 2 lun 0: <HL-DT-ST, DVDRAM GU70N, LE20> ATAPI 5/cdrom
>>>> removable
>>>> ichiic0 at pci0 dev 31 function 3 "Intel 7 Series SMBus" rev 0x04: apic 2
>>>> int 18
>>>> iic0 at ichiic0
>>>> spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
>>>> spdmem1 at iic0 addr 0x52: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
>>>> isa0 at pcib0
>>>> isadma0 at isa0
>>>> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
>>>> pckbd0 at pckbc0 (kbd slot)
>>>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>>>> pms0 at pckbc0 (aux slot)
>>>> wsmouse0 at pms0 mux 0
>>>> wsmouse1 at pms0 mux 0
>>>> pms0: Synaptics clickpad, firmware 8.1, 0x1e2b1 0x940300
>>>> pcppi0 at isa0 port 0x61
>>>> spkr0 at pcppi0
>>>> vmm0 at mainbus0: VMX/EPT
>>>> error: [drm:pid0:cpt_set_fifo_underrun_reporting] *ERROR* uncleared pch fifo
>>>> underrun on pch transcoder A
>>>> error: [drm:pid0:intel_pch_fifo_underrun_irq_handler] *ERROR* PCH transcoder
>>>> A FIFO underrun
>>>> uhub3 at uhub1 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
>>>> rev 2.00/0.00 addr 2
>>>> ugen0 at uhub3 port 3 "Intel product 0x07da" rev 2.00/78.69 addr 3
>>>> ugen1 at uhub3 port 4 "Validity Sensors VFS5011 Fingerprint Reader" rev
>>>> 1.10/0.78 addr 4
>>>> uvideo0 at uhub3 port 6 configuration 1 interface 0 "Vimicro corp.
>>>> Integrated Camera" rev 2.00/39.89 addr 5
>>>> video0 at uvideo0
>>>> uhub4 at uhub2 port 1 configuration 1 interface 0 "Intel Rate Matching Hub"
>>>> rev 2.00/0.00 addr 2
>>>> vscsi0 at root
>>>> scsibus2 at vscsi0: 256 targets
>>>> softraid0 at root
>>>> scsibus3 at softraid0: 256 targets
>>>> root on sd0a (142ebbf3d95f9810.a) swap on sd0b dump on sd0b
>>>>
>>>
>>
>