unwanted key repeating in X

classic Classic list List threaded Threaded
12 messages Options
Reply | Threaded
Open this post in threaded view
|

unwanted key repeating in X

Jonathan Glaschke-2
Hello,

sometimes when i type a key under x, it gets repeated and repeated and
so on. Sometimes i can stop this repeating by pressing the key again.
But then there will be another key that gets repeated in the next
seconds. If i can not stop it by pressing it again, it will be repeated
till i power off my computer manually (i waited 12 houres and i still
gets repeated). i can't quit X or something else
because the repeated key blocks all other keys.

If i manage to stop the key repeating by pressing the key again and
leave x, there will be no problem until i start x again. i never saw
this behaver when not using x11.

i changed my xorg.conf and i already tried to delete it and then use x
but the result was the same. I experienced the problem with severeal
window manangers, so i don't think that the problem lies there.

I dont thing it's a hardware problem because it only occurs in x11.

The problem don't seems to be a known issue because i didn't found
anything in openbsd's or x11's bug tracking system.

Any help would be appreciated,
Jonathan

--
 | /"\   ASCII Ribbon   | Jonathan Glaschke - Lorenz-Goertz-Stra_e 71,
 | \ / Campaign Against | 41238 Moenchengladbach, Germany;
 |  X    HTML In Mail   | jabber: [hidden email]
 | / \     And News     | http://jonathan-glaschke.de/

[demime 1.01d removed an attachment of type application/pgp-signature]

Reply | Threaded
Open this post in threaded view
|

Re: unwanted key repeating in X, dmesg

Jonathan Glaschke-2
OpenBSD 3.8-stable (GENERIC) #1: Sat Jan  7 16:45:00 CET 2006
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 1800+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.50
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR
cpu0: AMD Powernow: FID
real mem  = 502833152 (491048K)
avail mem = 451829760 (441240K)
using 4278 buffers containing 25243648 bytes (24652K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 06/19/02, BIOS32 rev. 0 @ 0xfdae0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, no battery
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf82d0/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0xa000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 740 PCI" rev 0x01
ppb0 at pci0 dev 1 function 0 "SIS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 650 VGA" rev 0x00: aperture at 0xc0000000,
size 0x400000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SIS 85C503 System" rev 0x10
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0xd0: 740: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N040ATCS04-0>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Slimtype, COMBO LSC-24081, 3ME6> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 2 function 7 "SIS 7012 AC97" rev 0xa0: irq 10, SiS7012
AC97
ac97: codec id 0x414c4710 (Avance Logic ALC200)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
sis0 at pci0 dev 3 function 0 "SIS 900 10/100BaseTX" rev 0x90: irq 5, address
00:0a:e6:3f:c3:14
rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1
"Conexant HSF 56k HSFi" rev 0x01 at pci0 dev 5 function 0 not configured
"VIA VT6306 FireWire" rev 0x46 at pci0 dev 7 function 0 not configured
uhci0 at pci0 dev 8 function 0 "VIA VT83C572 USB" rev 0x50: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 8 function 1 "VIA VT83C572 USB" rev 0x50: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 8 function 2 "VIA VT6202 USB" rev 0x51: irq 5
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
biomask ef7d netmask ef7d ttymask ffff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: vendor 0x15ca USB_PS2 Optical Mouse, rev 2.00/5.12, addr 2, iclass
3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
OpenBSD 3.8-stable (GENERIC) #1: Sat Jan  7 16:45:00 CET 2006
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) XP 1800+ ("AuthenticAMD" 686-class, 256KB L2 cache) 1.50
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
XSR
cpu0: AMD Powernow: FID
real mem  = 502833152 (491048K)
avail mem = 451829760 (441240K)
using 4278 buffers containing 25243648 bytes (24652K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 06/19/02, BIOS32 rev. 0 @ 0xfdae0
apm0 at bios0: Power Management spec V1.2
apm0: AC on, no battery
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf82d0/144 (7 entries)
pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 System" rev 0x00)
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0xa000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "SIS 740 PCI" rev 0x01
ppb0 at pci0 dev 1 function 0 "SIS 86C201 AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "SIS 650 VGA" rev 0x00: aperture at 0xc0000000,
size 0x400000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 2 function 0 "SIS 85C503 System" rev 0x10
pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0xd0: 740: DMA, channel 0
wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <IC25N040ATCS04-0>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Slimtype, COMBO LSC-24081, 3ME6> SCSI0 5/cdrom
removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 2 function 7 "SIS 7012 AC97" rev 0xa0: irq 10, SiS7012
AC97
ac97: codec id 0x414c4710 (Avance Logic ALC200)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, Realtek 3D
audio0 at auich0
sis0 at pci0 dev 3 function 0 "SIS 900 10/100BaseTX" rev 0x90: irq 5, address
00:0a:e6:3f:c3:14
rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1
"Conexant HSF 56k HSFi" rev 0x01 at pci0 dev 5 function 0 not configured
"VIA VT6306 FireWire" rev 0x46 at pci0 dev 7 function 0 not configured
uhci0 at pci0 dev 8 function 0 "VIA VT83C572 USB" rev 0x50: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 8 function 1 "VIA VT83C572 USB" rev 0x50: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 8 function 2 "VIA VT6202 USB" rev 0x51: irq 5
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
biomask ef7d netmask ef7d ttymask ffff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
WARNING: / was not properly unmounted
uhidev0 at uhub0 port 2 configuration 1 interface 0
uhidev0: vendor 0x15ca USB_PS2 Optical Mouse, rev 2.00/5.12, addr 2, iclass
3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0

--
 | /"\   ASCII Ribbon   | Jonathan Glaschke - Lorenz-Goertz-Stra_e 71,
 | \ / Campaign Against | 41238 Moenchengladbach, Germany;
 |  X    HTML In Mail   | jabber: [hidden email]
 | / \     And News     | http://jonathan-glaschke.de/

[demime 1.01d removed an attachment of type application/pgp-signature]

Reply | Threaded
Open this post in threaded view
|

Re: unwanted key repeating in X

f. g.
In reply to this post by Jonathan Glaschke-2
PIXMEUP.COM Advertise your website and earn $$$$ at the same time from it $$
pixelpages
by http://www.pixmeup.com/gjavierand best pixel site in the world, Advertise
your website and earn an income from it at the same time.


Pixmeup.com/pixelpages is now Ranked 1200th most view''d website in the
World and is an Internet phenomenon. What we are going to share with you
about pixel advertising can change your life forever and is already doing
so.


We are already the BIGGEST PIXEL site in the world and have more traffic at
http://www.pixmeup.com/gjavierthan the top 10 network marketing companies in
the world combined--and that includes all the BIG BOYS!

When you join http://www.pixmeup.com/gjavier and buy an ad for $25(USD) you
will receive two income generating Business Centers in our 3x8 Matrix. You
receive a Gold Business Center and a Silver Business Center.

You can buy as many $25 blocks of ad space that you want and you will
receive a Gold and Silver Business Center for each, or get 5 or 10 adds and
why wouldn''t you want to when you could be earning $19,000 on each add, So
if you had 4 you could be earning over $76,000 and if yo uhad 8 you could be
earnig over $152,000 and if that''s not enough you earn an extra 20% on your
personal sponserd downline and if that''s not enough you make an extra 5% on
your downlines downline which is crazy

Some of the best network marketers in the world have already signed upto
pixmeup and if their getting into it then why wouldn''t you wawt too.

Your Gold Business Center is placed [top to bottom - left to right] from the
top of the structure down starting with the company in the order that people
join. It doesn''t matter who refers them or what country they are from, they
just keep filling in. Every time a Business Center falls on your 3rd through
8th levels you will get paid.

Everyone''s Silver Business Center is placed under your sponsors Silver
Business Center. Every time sales take place on your 3rd through 8th levels
you''re making money.

Filling an entire matrix would make you $9,564.75. Once you have filled an
entire Matrix you will be given a new Business Center. Remember you get TWO
Business Centers for every $25 ad block, so it''s possible to make
$19,129.50 for every $25 spent on advertising.

All you have to do now is bring 1 person in and that''s you in the matrix.
before Pre-Launch you didn''t have to bring in anyone now it''s just 1
person

get yor webiste viewed by over 5 million people and more just imagine the
traffic that you could be getting to your site and all the possible sales,
Finaly there''s a way for the average joe to get his website view''d by
millions daily in every part of the world.

So come on in and take a look you wont regreat it.

http://www.pixmeup.com/gjavier

you''d be crazy not too it''s a win win situation!!!!

----- Original Message -----
From: "Jonathan Glaschke" <[hidden email]>
To: <[hidden email]>
Sent: Saturday, February 04, 2006 10:37 PM
Subject: unwanted key repeating in X


> Hello,
>
> sometimes when i type a key under x, it gets repeated and repeated and
> so on. Sometimes i can stop this repeating by pressing the key again.
> But then there will be another key that gets repeated in the next
> seconds. If i can not stop it by pressing it again, it will be repeated
> till i power off my computer manually (i waited 12 houres and i still
> gets repeated). i can't quit X or something else
> because the repeated key blocks all other keys.
>
> If i manage to stop the key repeating by pressing the key again and
> leave x, there will be no problem until i start x again. i never saw
> this behaver when not using x11.
>
> i changed my xorg.conf and i already tried to delete it and then use x
> but the result was the same. I experienced the problem with severeal
> window manangers, so i don't think that the problem lies there.
>
> I dont thing it's a hardware problem because it only occurs in x11.
>
> The problem don't seems to be a known issue because i didn't found
> anything in openbsd's or x11's bug tracking system.
>
> Any help would be appreciated,
> Jonathan
>
> --
> | /"\   ASCII Ribbon   | Jonathan Glaschke - Lorenz-Goertz-Stra_e 71,
> | \ / Campaign Against | 41238 Moenchengladbach, Germany;
> |  X    HTML In Mail   | jabber: [hidden email]
> | / \     And News     | http://jonathan-glaschke.de/
>
> [demime 1.01d removed an attachment of type application/pgp-signature]

Reply | Threaded
Open this post in threaded view
|

Re: unwanted key repeating in X, dmesg

f. g.
In reply to this post by Jonathan Glaschke-2
PIXMEUP.COM Advertise your website and earn $$$$ at the same time from it $$
pixelpages
by http://www.pixmeup.com/gjavierand best pixel site in the world, Advertise
your website and earn an income from it at the same time.


Pixmeup.com/pixelpages is now Ranked 1200th most view''d website in the
World and is an Internet phenomenon. What we are going to share with you
about pixel advertising can change your life forever and is already doing
so.


We are already the BIGGEST PIXEL site in the world and have more traffic at
http://www.pixmeup.com/gjavierthan the top 10 network marketing companies in
the world combined--and that includes all the BIG BOYS!

When you join http://www.pixmeup.com/gjavier and buy an ad for $25(USD) you
will receive two income generating Business Centers in our 3x8 Matrix. You
receive a Gold Business Center and a Silver Business Center.

You can buy as many $25 blocks of ad space that you want and you will
receive a Gold and Silver Business Center for each, or get 5 or 10 adds and
why wouldn''t you want to when you could be earning $19,000 on each add, So
if you had 4 you could be earning over $76,000 and if yo uhad 8 you could be
earnig over $152,000 and if that''s not enough you earn an extra 20% on your
personal sponserd downline and if that''s not enough you make an extra 5% on
your downlines downline which is crazy

Some of the best network marketers in the world have already signed upto
pixmeup and if their getting into it then why wouldn''t you wawt too.

Your Gold Business Center is placed [top to bottom - left to right] from the
top of the structure down starting with the company in the order that people
join. It doesn''t matter who refers them or what country they are from, they
just keep filling in. Every time a Business Center falls on your 3rd through
8th levels you will get paid.

Everyone''s Silver Business Center is placed under your sponsors Silver
Business Center. Every time sales take place on your 3rd through 8th levels
you''re making money.

Filling an entire matrix would make you $9,564.75. Once you have filled an
entire Matrix you will be given a new Business Center. Remember you get TWO
Business Centers for every $25 ad block, so it''s possible to make
$19,129.50 for every $25 spent on advertising.

All you have to do now is bring 1 person in and that''s you in the matrix.
before Pre-Launch you didn''t have to bring in anyone now it''s just 1
person

get yor webiste viewed by over 5 million people and more just imagine the
traffic that you could be getting to your site and all the possible sales,
Finaly there''s a way for the average joe to get his website view''d by
millions daily in every part of the world.

So come on in and take a look you wont regreat it.

http://www.pixmeup.com/gjavier

you''d be crazy not too it''s a win win situation!!!!

----- Original Message -----
From: "Jonathan Glaschke" <[hidden email]>
To: <[hidden email]>
Sent: Saturday, February 04, 2006 10:41 PM
Subject: Re: unwanted key repeating in X, dmesg


> OpenBSD 3.8-stable (GENERIC) #1: Sat Jan  7 16:45:00 CET 2006
>    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD Athlon(tm) XP 1800+ ("AuthenticAMD" 686-class, 256KB L2 cache)
> 1.50
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
> XSR
> cpu0: AMD Powernow: FID
> real mem  = 502833152 (491048K)
> avail mem = 451829760 (441240K)
> using 4278 buffers containing 25243648 bytes (24652K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 06/19/02, BIOS32 rev. 0 @
> 0xfdae0
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, no battery
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf82d0/144 (7 entries)
> pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 System" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0xc000 0xcc000/0xa000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "SIS 740 PCI" rev 0x01
> ppb0 at pci0 dev 1 function 0 "SIS 86C201 AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "SIS 650 VGA" rev 0x00: aperture at
> 0xc0000000,
> size 0x400000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 2 function 0 "SIS 85C503 System" rev 0x10
> pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0xd0: 740: DMA,
> channel 0
> wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <IC25N040ATCS04-0>
> wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <Slimtype, COMBO LSC-24081, 3ME6> SCSI0
> 5/cdrom
> removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> auich0 at pci0 dev 2 function 7 "SIS 7012 AC97" rev 0xa0: irq 10, SiS7012
> AC97
> ac97: codec id 0x414c4710 (Avance Logic ALC200)
> ac97: codec features headphone, 18 bit DAC, 18 bit ADC, Realtek 3D
> audio0 at auich0
> sis0 at pci0 dev 3 function 0 "SIS 900 10/100BaseTX" rev 0x90: irq 5,
> address
> 00:0a:e6:3f:c3:14
> rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1
> "Conexant HSF 56k HSFi" rev 0x01 at pci0 dev 5 function 0 not configured
> "VIA VT6306 FireWire" rev 0x46 at pci0 dev 7 function 0 not configured
> uhci0 at pci0 dev 8 function 0 "VIA VT83C572 USB" rev 0x50: irq 10
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 8 function 1 "VIA VT83C572 USB" rev 0x50: irq 11
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 8 function 2 "VIA VT6202 USB" rev 0x51: irq 5
> usb2 at ehci0: USB revision 2.0
> uhub2 at usb2
> uhub2: VIA EHCI root hub, rev 2.00/1.00, addr 1
> uhub2: 4 ports with 4 removable, self powered
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> biomask ef7d netmask ef7d ttymask ffff
> pctr: user-level cycle counter enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> uhidev0 at uhub0 port 2 configuration 1 interface 0
> uhidev0: vendor 0x15ca USB_PS2 Optical Mouse, rev 2.00/5.12, addr 2,
> iclass
> 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse1 at ums0 mux 0
> OpenBSD 3.8-stable (GENERIC) #1: Sat Jan  7 16:45:00 CET 2006
>    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: AMD Athlon(tm) XP 1800+ ("AuthenticAMD" 686-class, 256KB L2 cache)
> 1.50
> GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,F
> XSR
> cpu0: AMD Powernow: FID
> real mem  = 502833152 (491048K)
> avail mem = 451829760 (441240K)
> using 4278 buffers containing 25243648 bytes (24652K) of memory
> mainbus0 (root)
> bios0 at mainbus0: AT/286+(00) BIOS, date 06/19/02, BIOS32 rev. 0 @
> 0xfdae0
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, no battery
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf82d0/144 (7 entries)
> pcibios0: PCI Interrupt Router at 000:02:0 ("SIS 85C503 System" rev 0x00)
> pcibios0: PCI bus #1 is the last bus
> bios0: ROM list: 0xc0000/0xc000 0xcc000/0xa000
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "SIS 740 PCI" rev 0x01
> ppb0 at pci0 dev 1 function 0 "SIS 86C201 AGP" rev 0x00
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "SIS 650 VGA" rev 0x00: aperture at
> 0xc0000000,
> size 0x400000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> pcib0 at pci0 dev 2 function 0 "SIS 85C503 System" rev 0x10
> pciide0 at pci0 dev 2 function 5 "SIS 5513 EIDE" rev 0xd0: 740: DMA,
> channel 0
> wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <IC25N040ATCS04-0>
> wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <Slimtype, COMBO LSC-24081, 3ME6> SCSI0
> 5/cdrom
> removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> auich0 at pci0 dev 2 function 7 "SIS 7012 AC97" rev 0xa0: irq 10, SiS7012
> AC97
> ac97: codec id 0x414c4710 (Avance Logic ALC200)
> ac97: codec features headphone, 18 bit DAC, 18 bit ADC, Realtek 3D
> audio0 at auich0
> sis0 at pci0 dev 3 function 0 "SIS 900 10/100BaseTX" rev 0x90: irq 5,
> address
> 00:0a:e6:3f:c3:14
> rlphy0 at sis0 phy 1: RTL8201L 10/100 PHY, rev. 1
> "Conexant HSF 56k HSFi" rev 0x01 at pci0 dev 5 function 0 not configured
> "VIA VT6306 FireWire" rev 0x46 at pci0 dev 7 function 0 not configured
> uhci0 at pci0 dev 8 function 0 "VIA VT83C572 USB" rev 0x50: irq 10
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0
> uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub0: 2 ports with 2 removable, self powered
> uhci1 at pci0 dev 8 function 1 "VIA VT83C572 USB" rev 0x50: irq 11
> usb1 at uhci1: USB revision 1.0
> uhub1 at usb1
> uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
> uhub1: 2 ports with 2 removable, self powered
> ehci0 at pci0 dev 8 function 2 "VIA VT6202 USB" rev 0x51: irq 5
> usb2 at ehci0: USB revision 2.0
> uhub2 at usb2
> uhub2: VIA EHCI root hub, rev 2.00/1.00, addr 1
> uhub2: 4 ports with 4 removable, self powered
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> sysbeep0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: using exception 16
> biomask ef7d netmask ef7d ttymask ffff
> pctr: user-level cycle counter enabled
> mtrr: Pentium Pro MTRR support
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a
> rootdev=0x0 rrootdev=0x300 rawdev=0x302
> WARNING: / was not properly unmounted
> uhidev0 at uhub0 port 2 configuration 1 interface 0
> uhidev0: vendor 0x15ca USB_PS2 Optical Mouse, rev 2.00/5.12, addr 2,
> iclass
> 3/1
> ums0 at uhidev0: 3 buttons and Z dir.
> wsmouse1 at ums0 mux 0
>
> --
> | /"\   ASCII Ribbon   | Jonathan Glaschke - Lorenz-Goertz-Stra_e 71,
> | \ / Campaign Against | 41238 Moenchengladbach, Germany;
> |  X    HTML In Mail   | jabber: [hidden email]
> | / \     And News     | http://jonathan-glaschke.de/
>
> [demime 1.01d removed an attachment of type application/pgp-signature]

Reply | Threaded
Open this post in threaded view
|

Re: unwanted key repeating in X

Alexandre Anriot
In reply to this post by Jonathan Glaschke-2
> Hello,
>
> sometimes when i type a key under x, it gets repeated and repeated and
> so on. Sometimes i can stop this repeating by pressing the key again.
> But then there will be another key that gets repeated in the next
> seconds. If i can not stop it by pressing it again, it will be repeated
> till i power off my computer manually (i waited 12 houres and i still
> gets repeated). i can't quit X or something else
> because the repeated key blocks all other keys.
>
> If i manage to stop the key repeating by pressing the key again and
> leave x, there will be no problem until i start x again. i never saw
> this behaver when not using x11.
>
> i changed my xorg.conf and i already tried to delete it and then use x
> but the result was the same. I experienced the problem with severeal
> window manangers, so i don't think that the problem lies there.
>
> I dont thing it's a hardware problem because it only occurs in x11.
>
> The problem don't seems to be a known issue because i didn't found
> anything in openbsd's or x11's bug tracking system.
>
> Any help would be appreciated,
> Jonathan

What version of X are you running?

I saw the same issue on Zaurus a few months ago, but it disappeared
immediately after rebuilding -current X.

Reply | Threaded
Open this post in threaded view
|

Re: unwanted key repeating in X

Jonathan Glaschke-2
On Sun, Feb 05, 2006 at 01:46:19PM +0100, Alexandre Anriot wrote:

> > Hello,
> >
> > sometimes when i type a key under x, it gets repeated and repeated and
> > so on. Sometimes i can stop this repeating by pressing the key again.
> > But then there will be another key that gets repeated in the next
> > seconds. If i can not stop it by pressing it again, it will be repeated
> > till i power off my computer manually (i waited 12 houres and i still
> > gets repeated). i can't quit X or something else
> > because the repeated key blocks all other keys.
> >
> > If i manage to stop the key repeating by pressing the key again and
> > leave x, there will be no problem until i start x again. i never saw
> > this behaver when not using x11.
> >
> > i changed my xorg.conf and i already tried to delete it and then use x
> > but the result was the same. I experienced the problem with severeal
> > window manangers, so i don't think that the problem lies there.
> >
> > I dont thing it's a hardware problem because it only occurs in x11.
> >
> > The problem don't seems to be a known issue because i didn't found
> > anything in openbsd's or x11's bug tracking system.
> >
> > Any help would be appreciated,
> > Jonathan
>
> What version of X are you running?
>
> I saw the same issue on Zaurus a few months ago, but it disappeared
> immediately after rebuilding -current X.

I tried -current yesterday, the problem remains.
I also disassembled my notebook to clean the keyboard, it's perfect now
- same problem.

After I moved back to 3.8 all was perfect for houres, but that doesn't
mean that the problem is solved, because it sometimes just doesnt appear.

Then I did a kernel upgrade to -stable, rebooted my machine and had the
problem immediately back. That doesn't proof that the -stable kernel is
wrong, but i will work the next days with 3.8-non-stable and observe the
situation.

Jonathan

--
 | /"\   ASCII Ribbon   | Jonathan Glaschke - Lorenz-Goertz-Stra_e 71,
 | \ / Campaign Against | 41238 Moenchengladbach, Germany;
 |  X    HTML In Mail   | jabber: [hidden email]
 | / \     And News     | http://jonathan-glaschke.de/

[demime 1.01d removed an attachment of type application/pgp-signature]

Reply | Threaded
Open this post in threaded view
|

Re: unwanted key repeating in X

Joachim Schipper
On Wed, Feb 08, 2006 at 10:06:17PM +0100, Jonathan Glaschke wrote:

> On Sun, Feb 05, 2006 at 01:46:19PM +0100, Alexandre Anriot wrote:
> > > Hello,
> > >
> > > sometimes when i type a key under x, it gets repeated and repeated and
> > > so on. Sometimes i can stop this repeating by pressing the key again.
> > > But then there will be another key that gets repeated in the next
> > > seconds. If i can not stop it by pressing it again, it will be repeated
> > > till i power off my computer manually (i waited 12 houres and i still
> > > gets repeated). i can't quit X or something else
> > > because the repeated key blocks all other keys.
> > >
> > > If i manage to stop the key repeating by pressing the key again and
> > > leave x, there will be no problem until i start x again. i never saw
> > > this behaver when not using x11.
> > >
> > > i changed my xorg.conf and i already tried to delete it and then use x
> > > but the result was the same. I experienced the problem with severeal
> > > window manangers, so i don't think that the problem lies there.
> > >
> > > I dont thing it's a hardware problem because it only occurs in x11.
> > >
> > > The problem don't seems to be a known issue because i didn't found
> > > anything in openbsd's or x11's bug tracking system.
> > >
> > > Any help would be appreciated,
> > > Jonathan
> >
> > What version of X are you running?
> >
> > I saw the same issue on Zaurus a few months ago, but it disappeared
> > immediately after rebuilding -current X.
>
> I tried -current yesterday, the problem remains.
> I also disassembled my notebook to clean the keyboard, it's perfect now
> - same problem.
>
> After I moved back to 3.8 all was perfect for houres, but that doesn't
> mean that the problem is solved, because it sometimes just doesnt appear.
>
> Then I did a kernel upgrade to -stable, rebooted my machine and had the
> problem immediately back. That doesn't proof that the -stable kernel is
> wrong, but i will work the next days with 3.8-non-stable and observe the
> situation.

FWIW, I sometimes have the same problem. Observed under
X+ratpoison+rxvt+anything, where anything is, at any time, most likely
ksh or ksh+mutt.

I run 3.8-stable/i386.

                Joachim

Reply | Threaded
Open this post in threaded view
|

Re: unwanted key repeating in X

Jonathan Glaschke-2
On Thu, Feb 09, 2006 at 09:29:38PM +0100, Joachim Schipper wrote:
> On Wed, Feb 08, 2006 at 10:06:17PM +0100, Jonathan Glaschke wrote:
> > On Sun, Feb 05, 2006 at 01:46:19PM +0100, Alexandre Anriot wrote:
> > > > Hello,
> > > >
> > > > sometimes when i type a key under x, it gets repeated and repeated
and
> > > > so on. Sometimes i can stop this repeating by pressing the key again.
> > > > But then there will be another key that gets repeated in the next
> > > > seconds. If i can not stop it by pressing it again, it will be
repeated
> > > > till i power off my computer manually (i waited 12 houres and i still
> > > > gets repeated). i can't quit X or something else
> > > > because the repeated key blocks all other keys.
> > > >
> > > > If i manage to stop the key repeating by pressing the key again and
> > > > leave x, there will be no problem until i start x again. i never saw
> > > > this behaver when not using x11.
> > > >
> > > > i changed my xorg.conf and i already tried to delete it and then use
x

> > > > but the result was the same. I experienced the problem with severeal
> > > > window manangers, so i don't think that the problem lies there.
> > > >
> > > > I dont thing it's a hardware problem because it only occurs in x11.
> > > >
> > > > The problem don't seems to be a known issue because i didn't found
> > > > anything in openbsd's or x11's bug tracking system.
> > > >
> > > > Any help would be appreciated,
> > > > Jonathan
> > >
> > > What version of X are you running?
> > >
> > > I saw the same issue on Zaurus a few months ago, but it disappeared
> > > immediately after rebuilding -current X.
> >
> > I tried -current yesterday, the problem remains.
> > I also disassembled my notebook to clean the keyboard, it's perfect now
> > - same problem.
> >
> > After I moved back to 3.8 all was perfect for houres, but that doesn't
> > mean that the problem is solved, because it sometimes just doesnt appear.
> >
> > Then I did a kernel upgrade to -stable, rebooted my machine and had the
> > problem immediately back. That doesn't proof that the -stable kernel is
> > wrong, but i will work the next days with 3.8-non-stable and observe the
> > situation.
>
> FWIW, I sometimes have the same problem. Observed under
> X+ratpoison+rxvt+anything, where anything is, at any time, most likely
> ksh or ksh+mutt.
>
> I run 3.8-stable/i386.
>
> Joachim

I think I found a solution.

I use startx everytime, but sometimes in this way: "startx & exit".
When I do this, my keyboard shows this strange behavior. Everytime I do
it not, everything works just perfect. I testet it serveral times.

If anybody can explain this, i would be happy.

Jonathan

--
 | /"\   ASCII Ribbon   | Jonathan Glaschke - Lorenz-Goertz-Stra_e 71,
 | \ / Campaign Against | 41238 Moenchengladbach, Germany;
 |  X    HTML In Mail   | jabber: [hidden email]
 | / \     And News     | http://jonathan-glaschke.de/

[demime 1.01d removed an attachment of type application/pgp-signature]

Reply | Threaded
Open this post in threaded view
|

Re: unwanted key repeating in X

Joachim Schipper
On Fri, Feb 10, 2006 at 12:37:12AM +0100, Jonathan Glaschke wrote:

> On Thu, Feb 09, 2006 at 09:29:38PM +0100, Joachim Schipper wrote:
> > On Wed, Feb 08, 2006 at 10:06:17PM +0100, Jonathan Glaschke wrote:
> > > On Sun, Feb 05, 2006 at 01:46:19PM +0100, Alexandre Anriot wrote:
> > > > > Hello,
> > > > >
> > > > > sometimes when i type a key under x, it gets repeated and
> > > > > repeated and so on
>
> I think I found a solution.
>
> I use startx everytime, but sometimes in this way: "startx & exit".
> When I do this, my keyboard shows this strange behavior. Everytime I do
> it not, everything works just perfect. I testet it serveral times.
>
> If anybody can explain this, i would be happy.

I'll be trying startx & sleep 5 && exit for a bit. If that works out,
maybe a small sleep can be added at the end of the startx script, even
though that is not exactly a perfect solution.

Anyway, adding 'sleep 5' to the bottom of .xinitrc probably works as
well.

                Joachim

Reply | Threaded
Open this post in threaded view
|

Re: unwanted key repeating in X

Stuart Henderson
On 2006/02/10 01:50, Joachim Schipper wrote:
> I'll be trying startx & sleep 5 && exit for a bit.

How about 'exec startx'?

Reply | Threaded
Open this post in threaded view
|

Re: unwanted key repeating in X

ober-4
In reply to this post by Joachim Schipper
Try adding
xset b off
to your .xinitrc before everything else.

-Ober

Richard Chesler: [Reading a piece of paper] The first rule of Fight Club is you don't talk about Fight Club?
Narrator: [Voice-over] I'm half asleep again; I must've left the original in the copy machine.
Richard Chesler: The second rule of Fight Club - is this yours?
Narrator: Huh?
Richard Chesler: Pretend you're me, make a managerial decision: you find this, what would you do?

On Fri, 10 Feb 2006, Joachim Schipper wrote:

> Date: Fri, 10 Feb 2006 01:50:36 +0100
> From: Joachim Schipper <[hidden email]>
> To: [hidden email]
> Subject: Re: unwanted key repeating in X
>
> On Fri, Feb 10, 2006 at 12:37:12AM +0100, Jonathan Glaschke wrote:
>> On Thu, Feb 09, 2006 at 09:29:38PM +0100, Joachim Schipper wrote:
>>> On Wed, Feb 08, 2006 at 10:06:17PM +0100, Jonathan Glaschke wrote:
>>>> On Sun, Feb 05, 2006 at 01:46:19PM +0100, Alexandre Anriot wrote:
>>>>>> Hello,
>>>>>>
>>>>>> sometimes when i type a key under x, it gets repeated and
>>>>>> repeated and so on
>>
>> I think I found a solution.
>>
>> I use startx everytime, but sometimes in this way: "startx & exit".
>> When I do this, my keyboard shows this strange behavior. Everytime I do
>> it not, everything works just perfect. I testet it serveral times.
>>
>> If anybody can explain this, i would be happy.
>
> I'll be trying startx & sleep 5 && exit for a bit. If that works out,
> maybe a small sleep can be added at the end of the startx script, even
> though that is not exactly a perfect solution.
>
> Anyway, adding 'sleep 5' to the bottom of .xinitrc probably works as
> well.
>
> Joachim

Reply | Threaded
Open this post in threaded view
|

Re: unwanted key repeating in X

ober-4
That would be
xset r off

not b. that's for beep.

-Ober

Richard Chesler: [Reading a piece of paper] The first rule of Fight Club is you don't talk about Fight Club?
Narrator: [Voice-over] I'm half asleep again; I must've left the original in the copy machine.
Richard Chesler: The second rule of Fight Club - is this yours?
Narrator: Huh?
Richard Chesler: Pretend you're me, make a managerial decision: you find this, what would you do?

On Thu, 9 Feb 2006, ober wrote:

> Date: Thu, 9 Feb 2006 21:15:56 -0600 (CST)
> From: ober <[hidden email]>
> To: Joachim Schipper <[hidden email]>
> Cc: [hidden email]
> Subject: Re: unwanted key repeating in X
>
> Try adding
> xset b off
> to your .xinitrc before everything else.
>
> -Ober
>
> Richard Chesler: [Reading a piece of paper] The first rule of Fight Club is
> you don't talk about Fight Club?
> Narrator: [Voice-over] I'm half asleep again; I must've left the original in
> the copy machine.
> Richard Chesler: The second rule of Fight Club - is this yours?
> Narrator: Huh?
> Richard Chesler: Pretend you're me, make a managerial decision: you find
> this, what would you do?
>
> On Fri, 10 Feb 2006, Joachim Schipper wrote:
>
>> Date: Fri, 10 Feb 2006 01:50:36 +0100
>> From: Joachim Schipper <[hidden email]>
>> To: [hidden email]
>> Subject: Re: unwanted key repeating in X
>>
>> On Fri, Feb 10, 2006 at 12:37:12AM +0100, Jonathan Glaschke wrote:
>>> On Thu, Feb 09, 2006 at 09:29:38PM +0100, Joachim Schipper wrote:
>>>> On Wed, Feb 08, 2006 at 10:06:17PM +0100, Jonathan Glaschke wrote:
>>>>> On Sun, Feb 05, 2006 at 01:46:19PM +0100, Alexandre Anriot wrote:
>>>>>>> Hello,
>>>>>>>
>>>>>>> sometimes when i type a key under x, it gets repeated and
>>>>>>> repeated and so on
>>>
>>> I think I found a solution.
>>>
>>> I use startx everytime, but sometimes in this way: "startx & exit".
>>> When I do this, my keyboard shows this strange behavior. Everytime I do
>>> it not, everything works just perfect. I testet it serveral times.
>>>
>>> If anybody can explain this, i would be happy.
>>
>> I'll be trying startx & sleep 5 && exit for a bit. If that works out,
>> maybe a small sleep can be added at the end of the startx script, even
>> though that is not exactly a perfect solution.
>>
>> Anyway, adding 'sleep 5' to the bottom of .xinitrc probably works as
>> well.
>>
>> Joachim