uhub error

classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|

uhub error

Chris Chung-2
Hello,

When attempting to connect an external hard drive through a usb port I'm
receiving the error below. I can sucessfully mount my dvd drive and sd memory
cards without issue. This could be a hardware issue, but I'm not
sure. I have read the relevant FAQ sections along with the man pages for
disklabel and mount but still at a loss, so any additional insights would be appreciated.

# /var/log/messages
openbox /bsd: uhub5: device problem, disabling port 2

# dmesg
OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF
real mem  = 3178491904 (3031MB)
avail mem = 3116384256 (2972MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/17/11, BIOS32 rev. 0 @ 0xfdc50, SMBIOS rev. 2.4 @ 0xe0010 (80 entries)
bios0: vendor LENOVO version "6FET88WW (3.18 )" date 03/17/2011
bios0: LENOVO 4063HK6
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 266MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus -1 (EXP2)
acpiprt5 at acpi0: bus 5 (EXP3)
acpiprt6 at acpi0: bus 13 (EXP4)
acpiprt7 at acpi0: bus 21 (PCI1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 100 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4620" serial  1283 type LION oem "Panasonic"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit offline
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
cpu0: Enhanced SpeedStep 2661 MHz: speeds: 2667, 2666, 2133, 1600, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16
drm0 at inteldrm0
"Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
"Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
puc0 at pci0 dev 3 function 3 "Intel GM45 AMT SOL" rev 0x07: ports: 1 com
com3 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
com3: probed fifo depth: 0 bytes
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address 00:22:68:11:dc:fd
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
azalia0: codecs: Conexant CX20561, Conexant/0x2c06, using Conexant CX20561
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 20
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 21
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO 3T3R, MoW, address 00:21:6a:11:5a:be
ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int 23
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 20
pci4 at ppb3 bus 13
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
pci5 at ppb4 bus 21
cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
"Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured
sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int 18
sdmmc0 at sdhc0
"Ricoh 5C843 MMC" rev 0x11 at pci5 dev 0 function 3 not configured
"Ricoh 5C592 Memory Stick" rev 0x11 at pci5 dev 0 function 4 not configured
"Ricoh 5C852 xD" rev 0x11 at pci5 dev 0 function 5 not configured
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, ST9500420AS, 0003> SCSI3 0/direct fixed naa.5000c5002edad677
sd0: 476940MB, 512 bytes/sector, 976773168 sectors
cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GU10N, MX05> ATAPI 5/cdrom removable
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23
iic0 at ichiic0
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 7.0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
scsibus1 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
sd1: 15199MB, 512 bytes/sector, 31127552 sectors
uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2
video0 at uvideo0
ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
ugen1 at uhub3 port 2 "Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II" rev 2.00/3.99 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (ec0193beaab07f52.a) swap on sd0b dump on sd0


thanks,

chris.

Reply | Threaded
Open this post in threaded view
|

Re: uhub error

Tomas Bodzar-4
On Sun, Nov 11, 2012 at 2:53 AM, Chris Chung <[hidden email]> wrote:

> Hello,
>
> When attempting to connect an external hard drive through a usb port I'm
> receiving the error below. I can sucessfully mount my dvd drive and sd memory
> cards without issue. This could be a hardware issue, but I'm not
> sure. I have read the relevant FAQ sections along with the man pages for
> disklabel and mount but still at a loss, so any additional insights would be appreciated.
>
> # /var/log/messages
> openbox /bsd: uhub5: device problem, disabling port 2
>

From code http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/usb/uhub.c?rev=1.59

if (err) {
                        DPRINTFN(-1,("uhub_explore: usbd_new_device failed, "
                                     "error=%s\n", usbd_errstr(err)));
                        /* Avoid addressing problems by disabling. */
                        /* usbd_reset_port(dev, port, &up->status); */

                        /*
                         * The unit refused to accept a new address, or had
                         * some other serious problem.  Since we cannot leave
                         * at 0 we have to disable the port instead.
                         */
                        printf("%s: device problem, disabling port %d\n",
                               sc->sc_dev.dv_xname, port);
                        usbd_clear_port_feature(dev, port, UHF_PORT_ENABLE);

> # dmesg
> OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012
>     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF
> real mem  = 3178491904 (3031MB)
> avail mem = 3116384256 (2972MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 03/17/11, BIOS32 rev. 0 @ 0xfdc50, SMBIOS rev. 2.4 @ 0xe0010 (80 entries)
> bios0: vendor LENOVO version "6FET88WW (3.18 )" date 03/17/2011
> bios0: LENOVO 4063HK6
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA SSDT SSDT SSDT
> acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpiec0 at acpi0
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 266MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
> cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 2, remapped to apid 1
> acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (AGP_)
> acpiprt2 at acpi0: bus 2 (EXP0)
> acpiprt3 at acpi0: bus 3 (EXP1)
> acpiprt4 at acpi0: bus -1 (EXP2)
> acpiprt5 at acpi0: bus 5 (EXP3)
> acpiprt6 at acpi0: bus 13 (EXP4)
> acpiprt7 at acpi0: bus 21 (PCI1)
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpipwrres0 at acpi0: PUBS
> acpitz0 at acpi0: critical temperature is 127 degC
> acpitz1 at acpi0: critical temperature is 100 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "42T4620" serial  1283 type LION oem "Panasonic"
> acpibat1 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit offline
> acpithinkpad0 at acpi0
> acpidock0 at acpi0: GDCK not docked (0)
> bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
> cpu0: Enhanced SpeedStep 2661 MHz: speeds: 2667, 2666, 2133, 1600, 800 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> inteldrm0 at vga1: apic 1 int 16
> drm0 at inteldrm0
> "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> puc0 at pci0 dev 3 function 3 "Intel GM45 AMT SOL" rev 0x07: ports: 1 com
> com3 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
> com3: probed fifo depth: 0 bytes
> em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address 00:22:68:11:dc:fd
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
> azalia0: codecs: Conexant CX20561, Conexant/0x2c06, using Conexant CX20561
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 20
> pci1 at ppb0 bus 2
> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 21
> pci2 at ppb1 bus 3
> iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO 3T3R, MoW, address 00:21:6a:11:5a:be
> ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int 23
> pci3 at ppb2 bus 5
> ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 20
> pci4 at ppb3 bus 13
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> pci5 at ppb4 bus 21
> cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
> "Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured
> sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int 18
> sdmmc0 at sdhc0
> "Ricoh 5C843 MMC" rev 0x11 at pci5 dev 0 function 3 not configured
> "Ricoh 5C592 Memory Stick" rev 0x11 at pci5 dev 0 function 4 not configured
> "Ricoh 5C852 xD" rev 0x11 at pci5 dev 0 function 5 not configured
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0
> pcmcia0 at cardslot0
> pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, ST9500420AS, 0003> SCSI3 0/direct fixed naa.5000c5002edad677
> sd0: 476940MB, 512 bytes/sector, 976773168 sectors
> cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GU10N, MX05> ATAPI 5/cdrom removable
> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23
> iic0 at ichiic0
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics touchpad, firmware 7.0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> scsibus1 at sdmmc0: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
> sd1: 15199MB, 512 bytes/sector, 31127552 sectors
> uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2
> video0 at uvideo0
> ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
> ugen1 at uhub3 port 2 "Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II" rev 2.00/3.99 addr 3
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (ec0193beaab07f52.a) swap on sd0b dump on sd0
>
>
> thanks,
>
> chris.

Reply | Threaded
Open this post in threaded view
|

Re: uhub error

Chris Chung-2
On Sun, Nov 11, 2012 at 08:14:49AM +0100, Tomas Bodzar wrote:

> On Sun, Nov 11, 2012 at 2:53 AM, Chris Chung <[hidden email]> wrote:
> > Hello,
> >
> > When attempting to connect an external hard drive through a usb port I'm
> > receiving the error below. I can sucessfully mount my dvd drive and sd memory
> > cards without issue. This could be a hardware issue, but I'm not
> > sure. I have read the relevant FAQ sections along with the man pages for
> > disklabel and mount but still at a loss, so any additional insights would be appreciated.
> >
> > # /var/log/messages
> > openbox /bsd: uhub5: device problem, disabling port 2
> >
>
> From code http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/usb/uhub.c?rev=1.59
>
> if (err) {
> DPRINTFN(-1,("uhub_explore: usbd_new_device failed, "
>     "error=%s\n", usbd_errstr(err)));
> /* Avoid addressing problems by disabling. */
> /* usbd_reset_port(dev, port, &up->status); */
>
> /*
> * The unit refused to accept a new address, or had
> * some other serious problem.  Since we cannot leave
> * at 0 we have to disable the port instead.
> */
> printf("%s: device problem, disabling port %d\n",
>       sc->sc_dev.dv_xname, port);
> usbd_clear_port_feature(dev, port, UHF_PORT_ENABLE);
>
> > # dmesg
> > OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012
> >     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> > cpu0: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
> > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF
> > real mem  = 3178491904 (3031MB)
> > avail mem = 3116384256 (2972MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 03/17/11, BIOS32 rev. 0 @ 0xfdc50, SMBIOS rev. 2.4 @ 0xe0010 (80 entries)
> > bios0: vendor LENOVO version "6FET88WW (3.18 )" date 03/17/2011
> > bios0: LENOVO 4063HK6
> > acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S3 S4 S5
> > acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA SSDT SSDT SSDT
> > acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpiec0 at acpi0
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: apic clock running at 266MHz
> > cpu1 at mainbus0: apid 1 (application processor)
> > cpu1: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
> > cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF
> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> > ioapic0: misconfigured as apic 2, remapped to apid 1
> > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
> > acpihpet0 at acpi0: 14318179 Hz
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus -1 (AGP_)
> > acpiprt2 at acpi0: bus 2 (EXP0)
> > acpiprt3 at acpi0: bus 3 (EXP1)
> > acpiprt4 at acpi0: bus -1 (EXP2)
> > acpiprt5 at acpi0: bus 5 (EXP3)
> > acpiprt6 at acpi0: bus 13 (EXP4)
> > acpiprt7 at acpi0: bus 21 (PCI1)
> > acpicpu0 at acpi0: C3, C2, C1, PSS
> > acpicpu1 at acpi0: C3, C2, C1, PSS
> > acpipwrres0 at acpi0: PUBS
> > acpitz0 at acpi0: critical temperature is 127 degC
> > acpitz1 at acpi0: critical temperature is 100 degC
> > acpibtn0 at acpi0: LID_
> > acpibtn1 at acpi0: SLPB
> > acpibat0 at acpi0: BAT0 model "42T4620" serial  1283 type LION oem "Panasonic"
> > acpibat1 at acpi0: BAT1 not present
> > acpiac0 at acpi0: AC unit offline
> > acpithinkpad0 at acpi0
> > acpidock0 at acpi0: GDCK not docked (0)
> > bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
> > cpu0: Enhanced SpeedStep 2661 MHz: speeds: 2667, 2666, 2133, 1600, 800 MHz
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > intagp0 at vga1
> > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> > inteldrm0 at vga1: apic 1 int 16
> > drm0 at inteldrm0
> > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> > "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> > puc0 at pci0 dev 3 function 3 "Intel GM45 AMT SOL" rev 0x07: ports: 1 com
> > com3 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
> > com3: probed fifo depth: 0 bytes
> > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address 00:22:68:11:dc:fd
> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
> > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
> > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
> > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
> > usb0 at ehci0: USB revision 2.0
> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
> > azalia0: codecs: Conexant CX20561, Conexant/0x2c06, using Conexant CX20561
> > audio0 at azalia0
> > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 20
> > pci1 at ppb0 bus 2
> > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 21
> > pci2 at ppb1 bus 3
> > iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO 3T3R, MoW, address 00:21:6a:11:5a:be
> > ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int 23
> > pci3 at ppb2 bus 5
> > ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 20
> > pci4 at ppb3 bus 13
> > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
> > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
> > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
> > usb1 at ehci1: USB revision 2.0
> > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> > pci5 at ppb4 bus 21
> > cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
> > "Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured
> > sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int 18
> > sdmmc0 at sdhc0
> > "Ricoh 5C843 MMC" rev 0x11 at pci5 dev 0 function 3 not configured
> > "Ricoh 5C592 Memory Stick" rev 0x11 at pci5 dev 0 function 4 not configured
> > "Ricoh 5C852 xD" rev 0x11 at pci5 dev 0 function 5 not configured
> > cardslot0 at cbb0 slot 0 flags 0
> > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0
> > pcmcia0 at cardslot0
> > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
> > scsibus0 at ahci0: 32 targets
> > sd0 at scsibus0 targ 0 lun 0: <ATA, ST9500420AS, 0003> SCSI3 0/direct fixed naa.5000c5002edad677
> > sd0: 476940MB, 512 bytes/sector, 976773168 sectors
> > cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GU10N, MX05> ATAPI 5/cdrom removable
> > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23
> > iic0 at ichiic0
> > usb2 at uhci0: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci1: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb4 at uhci2: USB revision 1.0
> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb5 at uhci3: USB revision 1.0
> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb6 at uhci4: USB revision 1.0
> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb7 at uhci5: USB revision 1.0
> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > pckbc0: using irq 12 for aux slot
> > wsmouse0 at pms0 mux 0
> > wsmouse1 at pms0 mux 0
> > pms0: Synaptics touchpad, firmware 7.0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > aps0 at isa0 port 0x1600/31
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > mtrr: Pentium Pro MTRR support
> > scsibus1 at sdmmc0: 2 targets, initiator 0
> > sd1 at scsibus1 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
> > sd1: 15199MB, 512 bytes/sector, 31127552 sectors
> > uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2
> > video0 at uvideo0
> > ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
> > ugen1 at uhub3 port 2 "Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II" rev 2.00/3.99 addr 3
> > vscsi0 at root
> > scsibus2 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus3 at softraid0: 256 targets
> > root on sd0a (ec0193beaab07f52.a) swap on sd0b dump on sd0
> >
> >
> > thanks,
> >
> > chris.
> >

Hi Tomas,

Thanks for the response.

I connected a usb memory stick to the same usb port I was attempting to connect
the external hard drive to and recieved the messages below. This leads me
to believe the port is fine and it is the drive/connection is not compatible for some reason.

# /var/log/messages
openbox /bsd: umass0 at uhub1
openbox /bsd:  port 2 configuration 1 interface 0 "SanDisk U3 Cruzer Micro" rev 2.00/0.10 addr 2
openbox /bsd: umass0: using SCSI over Bulk-Only
openbox /bsd: scsibus4 at umass0: 2 targets, initiator 0
openbox /bsd: sd2 at scsibus4 targ 1 lun 0: <SanDisk, U3 Cruzer Micro, 4.05> SCSI2 0/direct removable
openbox /bsd: sd2: 3912MB, 512 bytes/sector, 8013453 sectors
openbox /bsd: cd1 at scsibus4 targ 1 lun 1: <SanDisk, U3 Cruzer Micro, 4.05> SCSI2 5/cdrom removabl

The strange thing is that this drive works fine when connecting to a windows machine,
so the drive itself is not faulty.  Are there any further diagnostics I can perform to
troubleshoot this issue, or should I consider this simply not a compatble device?

thanks,

chris.

Reply | Threaded
Open this post in threaded view
|

Re: uhub error

Tomas Bodzar-4
On Sun, Nov 11, 2012 at 5:15 PM, Chris Chung <[hidden email]> wrote:

> On Sun, Nov 11, 2012 at 08:14:49AM +0100, Tomas Bodzar wrote:
>> On Sun, Nov 11, 2012 at 2:53 AM, Chris Chung <[hidden email]> wrote:
>> > Hello,
>> >
>> > When attempting to connect an external hard drive through a usb port I'm
>> > receiving the error below. I can sucessfully mount my dvd drive and sd memory
>> > cards without issue. This could be a hardware issue, but I'm not
>> > sure. I have read the relevant FAQ sections along with the man pages for
>> > disklabel and mount but still at a loss, so any additional insights would be appreciated.
>> >
>> > # /var/log/messages
>> > openbox /bsd: uhub5: device problem, disabling port 2
>> >
>>
>> From code http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/usb/uhub.c?rev=1.59
>>
>> if (err) {
>>                       DPRINTFN(-1,("uhub_explore: usbd_new_device failed, "
>>                                    "error=%s\n", usbd_errstr(err)));
>>                       /* Avoid addressing problems by disabling. */
>>                       /* usbd_reset_port(dev, port, &up->status); */
>>
>>                       /*
>>                        * The unit refused to accept a new address, or had
>>                        * some other serious problem.  Since we cannot leave
>>                        * at 0 we have to disable the port instead.
>>                        */
>>                       printf("%s: device problem, disabling port %d\n",
>>                              sc->sc_dev.dv_xname, port);
>>                       usbd_clear_port_feature(dev, port, UHF_PORT_ENABLE);
>>
>> > # dmesg
>> > OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012
>> >     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
>> > cpu0: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
>> > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF
>> > real mem  = 3178491904 (3031MB)
>> > avail mem = 3116384256 (2972MB)
>> > mainbus0 at root
>> > bios0 at mainbus0: AT/286+ BIOS, date 03/17/11, BIOS32 rev. 0 @ 0xfdc50, SMBIOS rev. 2.4 @ 0xe0010 (80 entries)
>> > bios0: vendor LENOVO version "6FET88WW (3.18 )" date 03/17/2011
>> > bios0: LENOVO 4063HK6
>> > acpi0 at bios0: rev 2
>> > acpi0: sleep states S0 S3 S4 S5
>> > acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA SSDT SSDT SSDT
>> > acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
>> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> > acpiec0 at acpi0
>> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> > cpu0 at mainbus0: apid 0 (boot processor)
>> > cpu0: apic clock running at 266MHz
>> > cpu1 at mainbus0: apid 1 (application processor)
>> > cpu1: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
>> > cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF
>> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
>> > ioapic0: misconfigured as apic 2, remapped to apid 1
>> > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
>> > acpihpet0 at acpi0: 14318179 Hz
>> > acpiprt0 at acpi0: bus 0 (PCI0)
>> > acpiprt1 at acpi0: bus -1 (AGP_)
>> > acpiprt2 at acpi0: bus 2 (EXP0)
>> > acpiprt3 at acpi0: bus 3 (EXP1)
>> > acpiprt4 at acpi0: bus -1 (EXP2)
>> > acpiprt5 at acpi0: bus 5 (EXP3)
>> > acpiprt6 at acpi0: bus 13 (EXP4)
>> > acpiprt7 at acpi0: bus 21 (PCI1)
>> > acpicpu0 at acpi0: C3, C2, C1, PSS
>> > acpicpu1 at acpi0: C3, C2, C1, PSS
>> > acpipwrres0 at acpi0: PUBS
>> > acpitz0 at acpi0: critical temperature is 127 degC
>> > acpitz1 at acpi0: critical temperature is 100 degC
>> > acpibtn0 at acpi0: LID_
>> > acpibtn1 at acpi0: SLPB
>> > acpibat0 at acpi0: BAT0 model "42T4620" serial  1283 type LION oem "Panasonic"
>> > acpibat1 at acpi0: BAT1 not present
>> > acpiac0 at acpi0: AC unit offline
>> > acpithinkpad0 at acpi0
>> > acpidock0 at acpi0: GDCK not docked (0)
>> > bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
>> > cpu0: Enhanced SpeedStep 2661 MHz: speeds: 2667, 2666, 2133, 1600, 800 MHz
>> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
>> > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
>> > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
>> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> > intagp0 at vga1
>> > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
>> > inteldrm0 at vga1: apic 1 int 16
>> > drm0 at inteldrm0
>> > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
>> > "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
>> > puc0 at pci0 dev 3 function 3 "Intel GM45 AMT SOL" rev 0x07: ports: 1 com
>> > com3 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
>> > com3: probed fifo depth: 0 bytes
>> > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address 00:22:68:11:dc:fd
>> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
>> > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
>> > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
>> > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
>> > usb0 at ehci0: USB revision 2.0
>> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
>> > azalia0: codecs: Conexant CX20561, Conexant/0x2c06, using Conexant CX20561
>> > audio0 at azalia0
>> > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 20
>> > pci1 at ppb0 bus 2
>> > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 21
>> > pci2 at ppb1 bus 3
>> > iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO 3T3R, MoW, address 00:21:6a:11:5a:be
>> > ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int 23
>> > pci3 at ppb2 bus 5
>> > ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 20
>> > pci4 at ppb3 bus 13
>> > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
>> > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
>> > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
>> > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
>> > usb1 at ehci1: USB revision 2.0
>> > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
>> > pci5 at ppb4 bus 21
>> > cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
>> > "Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured
>> > sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int 18
>> > sdmmc0 at sdhc0
>> > "Ricoh 5C843 MMC" rev 0x11 at pci5 dev 0 function 3 not configured
>> > "Ricoh 5C592 Memory Stick" rev 0x11 at pci5 dev 0 function 4 not configured
>> > "Ricoh 5C852 xD" rev 0x11 at pci5 dev 0 function 5 not configured
>> > cardslot0 at cbb0 slot 0 flags 0
>> > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0
>> > pcmcia0 at cardslot0
>> > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
>> > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
>> > scsibus0 at ahci0: 32 targets
>> > sd0 at scsibus0 targ 0 lun 0: <ATA, ST9500420AS, 0003> SCSI3 0/direct fixed naa.5000c5002edad677
>> > sd0: 476940MB, 512 bytes/sector, 976773168 sectors
>> > cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GU10N, MX05> ATAPI 5/cdrom removable
>> > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23
>> > iic0 at ichiic0
>> > usb2 at uhci0: USB revision 1.0
>> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> > usb3 at uhci1: USB revision 1.0
>> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> > usb4 at uhci2: USB revision 1.0
>> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> > usb5 at uhci3: USB revision 1.0
>> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> > usb6 at uhci4: USB revision 1.0
>> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> > usb7 at uhci5: USB revision 1.0
>> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> > isa0 at pcib0
>> > isadma0 at isa0
>> > pckbc0 at isa0 port 0x60/5
>> > pckbd0 at pckbc0 (kbd slot)
>> > pckbc0: using irq 1 for kbd slot
>> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> > pms0 at pckbc0 (aux slot)
>> > pckbc0: using irq 12 for aux slot
>> > wsmouse0 at pms0 mux 0
>> > wsmouse1 at pms0 mux 0
>> > pms0: Synaptics touchpad, firmware 7.0
>> > pcppi0 at isa0 port 0x61
>> > spkr0 at pcppi0
>> > aps0 at isa0 port 0x1600/31
>> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> > mtrr: Pentium Pro MTRR support
>> > scsibus1 at sdmmc0: 2 targets, initiator 0
>> > sd1 at scsibus1 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
>> > sd1: 15199MB, 512 bytes/sector, 31127552 sectors
>> > uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2
>> > video0 at uvideo0
>> > ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
>> > ugen1 at uhub3 port 2 "Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II" rev 2.00/3.99 addr 3
>> > vscsi0 at root
>> > scsibus2 at vscsi0: 256 targets
>> > softraid0 at root
>> > scsibus3 at softraid0: 256 targets
>> > root on sd0a (ec0193beaab07f52.a) swap on sd0b dump on sd0
>> >
>> >
>> > thanks,
>> >
>> > chris.
>> >
>
> Hi Tomas,
>
> Thanks for the response.
>
> I connected a usb memory stick to the same usb port I was attempting to connect
> the external hard drive to and recieved the messages below. This leads me
> to believe the port is fine and it is the drive/connection is not compatible for some reason.
>
> # /var/log/messages
> openbox /bsd: umass0 at uhub1
> openbox /bsd:  port 2 configuration 1 interface 0 "SanDisk U3 Cruzer Micro" rev 2.00/0.10 addr 2
> openbox /bsd: umass0: using SCSI over Bulk-Only
> openbox /bsd: scsibus4 at umass0: 2 targets, initiator 0
> openbox /bsd: sd2 at scsibus4 targ 1 lun 0: <SanDisk, U3 Cruzer Micro, 4.05> SCSI2 0/direct removable
> openbox /bsd: sd2: 3912MB, 512 bytes/sector, 8013453 sectors
> openbox /bsd: cd1 at scsibus4 targ 1 lun 1: <SanDisk, U3 Cruzer Micro, 4.05> SCSI2 5/cdrom removabl
>
> The strange thing is that this drive works fine when connecting to a windows machine,
> so the drive itself is not faulty.  Are there any further diagnostics I can perform to
> troubleshoot this issue, or should I consider this simply not a compatble device?

Check man usbdevs and try to get more details about your device when
connected with that command. You can try to install usbutil package as
well which have some more utilites. There's usbutils as well, but
seems like it doesn't have all commands as usbutil. All of them can
provide more details about your HW if possible to get them of course.
Which filesystem is on your device and what product is that? Can you
check with scandisk or whatever for errors?

>
> thanks,
>
> chris.

Reply | Threaded
Open this post in threaded view
|

Re: uhub error

Chris Chung-2
On Sun, Nov 11, 2012 at 07:05:43PM +0100, Tomas Bodzar wrote:

> On Sun, Nov 11, 2012 at 5:15 PM, Chris Chung <[hidden email]> wrote:
> > On Sun, Nov 11, 2012 at 08:14:49AM +0100, Tomas Bodzar wrote:
> >> On Sun, Nov 11, 2012 at 2:53 AM, Chris Chung <[hidden email]> wrote:
> >> > Hello,
> >> >
> >> > When attempting to connect an external hard drive through a usb port I'm
> >> > receiving the error below. I can sucessfully mount my dvd drive and sd memory
> >> > cards without issue. This could be a hardware issue, but I'm not
> >> > sure. I have read the relevant FAQ sections along with the man pages for
> >> > disklabel and mount but still at a loss, so any additional insights would be appreciated.
> >> >
> >> > # /var/log/messages
> >> > openbox /bsd: uhub5: device problem, disabling port 2
> >> >
> >>
> >> From code http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/usb/uhub.c?rev=1.59
> >>
> >> if (err) {
> >>                       DPRINTFN(-1,("uhub_explore: usbd_new_device failed, "
> >>                                    "error=%s\n", usbd_errstr(err)));
> >>                       /* Avoid addressing problems by disabling. */
> >>                       /* usbd_reset_port(dev, port, &up->status); */
> >>
> >>                       /*
> >>                        * The unit refused to accept a new address, or had
> >>                        * some other serious problem.  Since we cannot leave
> >>                        * at 0 we have to disable the port instead.
> >>                        */
> >>                       printf("%s: device problem, disabling port %d\n",
> >>                              sc->sc_dev.dv_xname, port);
> >>                       usbd_clear_port_feature(dev, port, UHF_PORT_ENABLE);
> >>
> >> > # dmesg
> >> > OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012
> >> >     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> >> > cpu0: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
> >> > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF
> >> > real mem  = 3178491904 (3031MB)
> >> > avail mem = 3116384256 (2972MB)
> >> > mainbus0 at root
> >> > bios0 at mainbus0: AT/286+ BIOS, date 03/17/11, BIOS32 rev. 0 @ 0xfdc50, SMBIOS rev. 2.4 @ 0xe0010 (80 entries)
> >> > bios0: vendor LENOVO version "6FET88WW (3.18 )" date 03/17/2011
> >> > bios0: LENOVO 4063HK6
> >> > acpi0 at bios0: rev 2
> >> > acpi0: sleep states S0 S3 S4 S5
> >> > acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA SSDT SSDT SSDT
> >> > acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
> >> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> >> > acpiec0 at acpi0
> >> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> >> > cpu0 at mainbus0: apid 0 (boot processor)
> >> > cpu0: apic clock running at 266MHz
> >> > cpu1 at mainbus0: apid 1 (application processor)
> >> > cpu1: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
> >> > cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF
> >> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> >> > ioapic0: misconfigured as apic 2, remapped to apid 1
> >> > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
> >> > acpihpet0 at acpi0: 14318179 Hz
> >> > acpiprt0 at acpi0: bus 0 (PCI0)
> >> > acpiprt1 at acpi0: bus -1 (AGP_)
> >> > acpiprt2 at acpi0: bus 2 (EXP0)
> >> > acpiprt3 at acpi0: bus 3 (EXP1)
> >> > acpiprt4 at acpi0: bus -1 (EXP2)
> >> > acpiprt5 at acpi0: bus 5 (EXP3)
> >> > acpiprt6 at acpi0: bus 13 (EXP4)
> >> > acpiprt7 at acpi0: bus 21 (PCI1)
> >> > acpicpu0 at acpi0: C3, C2, C1, PSS
> >> > acpicpu1 at acpi0: C3, C2, C1, PSS
> >> > acpipwrres0 at acpi0: PUBS
> >> > acpitz0 at acpi0: critical temperature is 127 degC
> >> > acpitz1 at acpi0: critical temperature is 100 degC
> >> > acpibtn0 at acpi0: LID_
> >> > acpibtn1 at acpi0: SLPB
> >> > acpibat0 at acpi0: BAT0 model "42T4620" serial  1283 type LION oem "Panasonic"
> >> > acpibat1 at acpi0: BAT1 not present
> >> > acpiac0 at acpi0: AC unit offline
> >> > acpithinkpad0 at acpi0
> >> > acpidock0 at acpi0: GDCK not docked (0)
> >> > bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
> >> > cpu0: Enhanced SpeedStep 2661 MHz: speeds: 2667, 2666, 2133, 1600, 800 MHz
> >> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> >> > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> >> > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> >> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> >> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> >> > intagp0 at vga1
> >> > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> >> > inteldrm0 at vga1: apic 1 int 16
> >> > drm0 at inteldrm0
> >> > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> >> > "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> >> > puc0 at pci0 dev 3 function 3 "Intel GM45 AMT SOL" rev 0x07: ports: 1 com
> >> > com3 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
> >> > com3: probed fifo depth: 0 bytes
> >> > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address 00:22:68:11:dc:fd
> >> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
> >> > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
> >> > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
> >> > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
> >> > usb0 at ehci0: USB revision 2.0
> >> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> >> > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
> >> > azalia0: codecs: Conexant CX20561, Conexant/0x2c06, using Conexant CX20561
> >> > audio0 at azalia0
> >> > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 20
> >> > pci1 at ppb0 bus 2
> >> > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 21
> >> > pci2 at ppb1 bus 3
> >> > iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO 3T3R, MoW, address 00:21:6a:11:5a:be
> >> > ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int 23
> >> > pci3 at ppb2 bus 5
> >> > ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 20
> >> > pci4 at ppb3 bus 13
> >> > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
> >> > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
> >> > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> >> > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
> >> > usb1 at ehci1: USB revision 2.0
> >> > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> >> > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> >> > pci5 at ppb4 bus 21
> >> > cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
> >> > "Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured
> >> > sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int 18
> >> > sdmmc0 at sdhc0
> >> > "Ricoh 5C843 MMC" rev 0x11 at pci5 dev 0 function 3 not configured
> >> > "Ricoh 5C592 Memory Stick" rev 0x11 at pci5 dev 0 function 4 not configured
> >> > "Ricoh 5C852 xD" rev 0x11 at pci5 dev 0 function 5 not configured
> >> > cardslot0 at cbb0 slot 0 flags 0
> >> > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0
> >> > pcmcia0 at cardslot0
> >> > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> >> > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
> >> > scsibus0 at ahci0: 32 targets
> >> > sd0 at scsibus0 targ 0 lun 0: <ATA, ST9500420AS, 0003> SCSI3 0/direct fixed naa.5000c5002edad677
> >> > sd0: 476940MB, 512 bytes/sector, 976773168 sectors
> >> > cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GU10N, MX05> ATAPI 5/cdrom removable
> >> > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23
> >> > iic0 at ichiic0
> >> > usb2 at uhci0: USB revision 1.0
> >> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> > usb3 at uhci1: USB revision 1.0
> >> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> > usb4 at uhci2: USB revision 1.0
> >> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> > usb5 at uhci3: USB revision 1.0
> >> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> > usb6 at uhci4: USB revision 1.0
> >> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> > usb7 at uhci5: USB revision 1.0
> >> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> > isa0 at pcib0
> >> > isadma0 at isa0
> >> > pckbc0 at isa0 port 0x60/5
> >> > pckbd0 at pckbc0 (kbd slot)
> >> > pckbc0: using irq 1 for kbd slot
> >> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> >> > pms0 at pckbc0 (aux slot)
> >> > pckbc0: using irq 12 for aux slot
> >> > wsmouse0 at pms0 mux 0
> >> > wsmouse1 at pms0 mux 0
> >> > pms0: Synaptics touchpad, firmware 7.0
> >> > pcppi0 at isa0 port 0x61
> >> > spkr0 at pcppi0
> >> > aps0 at isa0 port 0x1600/31
> >> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> >> > mtrr: Pentium Pro MTRR support
> >> > scsibus1 at sdmmc0: 2 targets, initiator 0
> >> > sd1 at scsibus1 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
> >> > sd1: 15199MB, 512 bytes/sector, 31127552 sectors
> >> > uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2
> >> > video0 at uvideo0
> >> > ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
> >> > ugen1 at uhub3 port 2 "Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II" rev 2.00/3.99 addr 3
> >> > vscsi0 at root
> >> > scsibus2 at vscsi0: 256 targets
> >> > softraid0 at root
> >> > scsibus3 at softraid0: 256 targets
> >> > root on sd0a (ec0193beaab07f52.a) swap on sd0b dump on sd0
> >> >
> >> >
> >> > thanks,
> >> >
> >> > chris.
> >> >
> >
> > Hi Tomas,
> >
> > Thanks for the response.
> >
> > I connected a usb memory stick to the same usb port I was attempting to connect
> > the external hard drive to and recieved the messages below. This leads me
> > to believe the port is fine and it is the drive/connection is not compatible for some reason.
> >
> > # /var/log/messages
> > openbox /bsd: umass0 at uhub1
> > openbox /bsd:  port 2 configuration 1 interface 0 "SanDisk U3 Cruzer Micro" rev 2.00/0.10 addr 2
> > openbox /bsd: umass0: using SCSI over Bulk-Only
> > openbox /bsd: scsibus4 at umass0: 2 targets, initiator 0
> > openbox /bsd: sd2 at scsibus4 targ 1 lun 0: <SanDisk, U3 Cruzer Micro, 4.05> SCSI2 0/direct removable
> > openbox /bsd: sd2: 3912MB, 512 bytes/sector, 8013453 sectors
> > openbox /bsd: cd1 at scsibus4 targ 1 lun 1: <SanDisk, U3 Cruzer Micro, 4.05> SCSI2 5/cdrom removabl
> >
> > The strange thing is that this drive works fine when connecting to a windows machine,
> > so the drive itself is not faulty.  Are there any further diagnostics I can perform to
> > troubleshoot this issue, or should I consider this simply not a compatble device?
>
> Check man usbdevs and try to get more details about your device when
> connected with that command. You can try to install usbutil package as
> well which have some more utilites. There's usbutils as well, but
> seems like it doesn't have all commands as usbutil. All of them can
> provide more details about your HW if possible to get them of course.
> Which filesystem is on your device and what product is that? Can you
> check with scandisk or whatever for errors?
>
> >
> > thanks,
> >
> > chris.

Thanks for the hints. Here is a bit more information on the device.

External 2.5" Western Digital SATA drive / INEO USB 3.0 enclosure connected
to a USB 2.0 port on my Lenovo W500. The external drive is formatted as NTFS.
I'm reading a few posts on the internet which indicate that OpenBSD does not
currently support USB 3.0. Not sure if this is the issue I have or not. I'll
hopefuly be able to test later this week with a USB 2.0 enclosure.

From what I can tell there is little to no information which I can probe
from the device when connected. Any futher thoughts or should I wait until
this can be tested with a USB 2.0 enclosure? Thanks again.

# output from usbdevs -dv; external drive is not present/recognized
Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00
  uhub0
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 powered
 port 6 addr 2: high speed, power 100 mA, config 1, product 0x4807(0x4807), Chicony Electronics Co., Ltd.(0x17ef), rev 31.34
   uvideo0
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00
  uhub1
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 powered
 port 6 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
  uhub2
 port 1 powered
 port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
  uhub3
 port 1 addr 2: full speed, power 100 mA, config 1, Fingerprint Sensor(0x2810), AuthenTec(0x08ff), rev 17.03
   ugen0
 port 2 addr 3: full speed, self powered, config 1, ThinkPad Bluetooth with Enhanced Data Rate II(0x2145), Lenovo Computer Corp(0x0a5c), rev 3.99
   ugen1
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
  uhub4
 port 1 powered
 port 2 powered
Controller /dev/usb5:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
  uhub5
 port 1 powered
 port 2 powered
Controller /dev/usb6:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
  uhub6
 port 1 powered
 port 2 powered
Controller /dev/usb7:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
  uhub7
 port 1 powered
 port 2 powered

# output from usbstats
 Controller /dev/usb0:
       147 control
         0 isochronous
         0 bulk
         3 interrupt
Controller /dev/usb1:
       395 control
         0 isochronous
       308 bulk
        20 interrupt
Controller /dev/usb2:
        73 control
         0 isochronous
         0 bulk
         0 interrupt
Controller /dev/usb3:
       245 control
         0 isochronous
         0 bulk
         9 interrupt
Controller /dev/usb4:
        73 control
         0 isochronous
         0 bulk
         0 interrupt
Controller /dev/usb5:
       276 control
         0 isochronous
         0 bulk
        23 interrupt
Controller /dev/usb6:
        73 control
         0 isochronous
         0 bulk
         0 interrupt
Controller /dev/usb7:
        73 control
         0 isochronous
         0 bulk
         0 interrupt

usbctl -a 2 -f /dev/usb5 does not give me anything.

Reply | Threaded
Open this post in threaded view
|

Re: uhub error

Alexander Polakov
In reply to this post by Chris Chung-2
* Chris Chung <[hidden email]> [121111 06:30]:

> Hello,
>
> When attempting to connect an external hard drive through a usb port I'm
> receiving the error below. I can sucessfully mount my dvd drive and sd memory
> cards without issue. This could be a hardware issue, but I'm not
> sure. I have read the relevant FAQ sections along with the man pages for
> disklabel and mount but still at a loss, so any additional insights would be appreciated.
>
> # /var/log/messages
> openbox /bsd: uhub5: device problem, disabling port 2
>

Just a "you are not alone" reply.  This happens to me sometimes when I connect
my e-book reader (which presents itself as usb storage).

This time it worked:

umass0 at uhub5 port 1 configuration 1 interface 0 "Linux 2.6.24.2-Boeye with s3c-udc File-backed Storage Gadget" rev 2.00/3.22 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd1 at scsibus2 targ 1 lun 0: <Linux, File-Stor Gadget, 0322> SCSI2 0/direct removable serial.00850600372041756775
sd1: 1885MB, 512 bytes/sector, 3862393 sectors

Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 powered
 port 6 addr 2: high speed, self powered, config 1, product 0x4485(0x4485), IBM(0x04b3), rev 0.01
  port 1 addr 3: high speed, power 2 mA, config 1, File-backed Storage Gadget(0x0600), Linux 2.6.24.2-Boeye with s3c-udc(0x0085), rev 3.22, iSerialNumber 372041756775
  port 2 powered
  port 3 powered
  port 4 powered
 port 7 powered
 port 8 powered
Controller /dev/usb1:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 powered
 port 2 addr 2: full speed, power 100 mA, config 1, Biometric Coprocessor(0x2016), STMicroelectronics(0x0483), rev 0.01

--
Alexander Polakov | plhk.ru

Reply | Threaded
Open this post in threaded view
|

Re: uhub error

Tomas Bodzar-4
In reply to this post by Chris Chung-2
On Mon, Nov 12, 2012 at 12:11 AM, Chris Chung <[hidden email]> wrote:

> On Sun, Nov 11, 2012 at 07:05:43PM +0100, Tomas Bodzar wrote:
>> On Sun, Nov 11, 2012 at 5:15 PM, Chris Chung <[hidden email]> wrote:
>> > On Sun, Nov 11, 2012 at 08:14:49AM +0100, Tomas Bodzar wrote:
>> >> On Sun, Nov 11, 2012 at 2:53 AM, Chris Chung <[hidden email]> wrote:
>> >> > Hello,
>> >> >
>> >> > When attempting to connect an external hard drive through a usb port I'm
>> >> > receiving the error below. I can sucessfully mount my dvd drive and sd memory
>> >> > cards without issue. This could be a hardware issue, but I'm not
>> >> > sure. I have read the relevant FAQ sections along with the man pages for
>> >> > disklabel and mount but still at a loss, so any additional insights would be appreciated.
>> >> >
>> >> > # /var/log/messages
>> >> > openbox /bsd: uhub5: device problem, disabling port 2
>> >> >
>> >>
>> >> From code http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/usb/uhub.c?rev=1.59
>> >>
>> >> if (err) {
>> >>                       DPRINTFN(-1,("uhub_explore: usbd_new_device failed, "
>> >>                                    "error=%s\n", usbd_errstr(err)));
>> >>                       /* Avoid addressing problems by disabling. */
>> >>                       /* usbd_reset_port(dev, port, &up->status); */
>> >>
>> >>                       /*
>> >>                        * The unit refused to accept a new address, or had
>> >>                        * some other serious problem.  Since we cannot leave
>> >>                        * at 0 we have to disable the port instead.
>> >>                        */
>> >>                       printf("%s: device problem, disabling port %d\n",
>> >>                              sc->sc_dev.dv_xname, port);
>> >>                       usbd_clear_port_feature(dev, port, UHF_PORT_ENABLE);
>> >>
>> >> > # dmesg
>> >> > OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012
>> >> >     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
>> >> > cpu0: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
>> >> > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF
>> >> > real mem  = 3178491904 (3031MB)
>> >> > avail mem = 3116384256 (2972MB)
>> >> > mainbus0 at root
>> >> > bios0 at mainbus0: AT/286+ BIOS, date 03/17/11, BIOS32 rev. 0 @ 0xfdc50, SMBIOS rev. 2.4 @ 0xe0010 (80 entries)
>> >> > bios0: vendor LENOVO version "6FET88WW (3.18 )" date 03/17/2011
>> >> > bios0: LENOVO 4063HK6
>> >> > acpi0 at bios0: rev 2
>> >> > acpi0: sleep states S0 S3 S4 S5
>> >> > acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA SSDT SSDT SSDT
>> >> > acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
>> >> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> >> > acpiec0 at acpi0
>> >> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> >> > cpu0 at mainbus0: apid 0 (boot processor)
>> >> > cpu0: apic clock running at 266MHz
>> >> > cpu1 at mainbus0: apid 1 (application processor)
>> >> > cpu1: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
>> >> > cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF
>> >> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
>> >> > ioapic0: misconfigured as apic 2, remapped to apid 1
>> >> > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
>> >> > acpihpet0 at acpi0: 14318179 Hz
>> >> > acpiprt0 at acpi0: bus 0 (PCI0)
>> >> > acpiprt1 at acpi0: bus -1 (AGP_)
>> >> > acpiprt2 at acpi0: bus 2 (EXP0)
>> >> > acpiprt3 at acpi0: bus 3 (EXP1)
>> >> > acpiprt4 at acpi0: bus -1 (EXP2)
>> >> > acpiprt5 at acpi0: bus 5 (EXP3)
>> >> > acpiprt6 at acpi0: bus 13 (EXP4)
>> >> > acpiprt7 at acpi0: bus 21 (PCI1)
>> >> > acpicpu0 at acpi0: C3, C2, C1, PSS
>> >> > acpicpu1 at acpi0: C3, C2, C1, PSS
>> >> > acpipwrres0 at acpi0: PUBS
>> >> > acpitz0 at acpi0: critical temperature is 127 degC
>> >> > acpitz1 at acpi0: critical temperature is 100 degC
>> >> > acpibtn0 at acpi0: LID_
>> >> > acpibtn1 at acpi0: SLPB
>> >> > acpibat0 at acpi0: BAT0 model "42T4620" serial  1283 type LION oem "Panasonic"
>> >> > acpibat1 at acpi0: BAT1 not present
>> >> > acpiac0 at acpi0: AC unit offline
>> >> > acpithinkpad0 at acpi0
>> >> > acpidock0 at acpi0: GDCK not docked (0)
>> >> > bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
>> >> > cpu0: Enhanced SpeedStep 2661 MHz: speeds: 2667, 2666, 2133, 1600, 800 MHz
>> >> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
>> >> > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
>> >> > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
>> >> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> >> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> >> > intagp0 at vga1
>> >> > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
>> >> > inteldrm0 at vga1: apic 1 int 16
>> >> > drm0 at inteldrm0
>> >> > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
>> >> > "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
>> >> > puc0 at pci0 dev 3 function 3 "Intel GM45 AMT SOL" rev 0x07: ports: 1 com
>> >> > com3 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
>> >> > com3: probed fifo depth: 0 bytes
>> >> > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address 00:22:68:11:dc:fd
>> >> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
>> >> > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
>> >> > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
>> >> > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
>> >> > usb0 at ehci0: USB revision 2.0
>> >> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> >> > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
>> >> > azalia0: codecs: Conexant CX20561, Conexant/0x2c06, using Conexant CX20561
>> >> > audio0 at azalia0
>> >> > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 20
>> >> > pci1 at ppb0 bus 2
>> >> > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 21
>> >> > pci2 at ppb1 bus 3
>> >> > iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO 3T3R, MoW, address 00:21:6a:11:5a:be
>> >> > ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int 23
>> >> > pci3 at ppb2 bus 5
>> >> > ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 20
>> >> > pci4 at ppb3 bus 13
>> >> > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
>> >> > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
>> >> > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
>> >> > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
>> >> > usb1 at ehci1: USB revision 2.0
>> >> > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
>> >> > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
>> >> > pci5 at ppb4 bus 21
>> >> > cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
>> >> > "Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured
>> >> > sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int 18
>> >> > sdmmc0 at sdhc0
>> >> > "Ricoh 5C843 MMC" rev 0x11 at pci5 dev 0 function 3 not configured
>> >> > "Ricoh 5C592 Memory Stick" rev 0x11 at pci5 dev 0 function 4 not configured
>> >> > "Ricoh 5C852 xD" rev 0x11 at pci5 dev 0 function 5 not configured
>> >> > cardslot0 at cbb0 slot 0 flags 0
>> >> > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0
>> >> > pcmcia0 at cardslot0
>> >> > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
>> >> > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
>> >> > scsibus0 at ahci0: 32 targets
>> >> > sd0 at scsibus0 targ 0 lun 0: <ATA, ST9500420AS, 0003> SCSI3 0/direct fixed naa.5000c5002edad677
>> >> > sd0: 476940MB, 512 bytes/sector, 976773168 sectors
>> >> > cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GU10N, MX05> ATAPI 5/cdrom removable
>> >> > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23
>> >> > iic0 at ichiic0
>> >> > usb2 at uhci0: USB revision 1.0
>> >> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> >> > usb3 at uhci1: USB revision 1.0
>> >> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> >> > usb4 at uhci2: USB revision 1.0
>> >> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> >> > usb5 at uhci3: USB revision 1.0
>> >> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> >> > usb6 at uhci4: USB revision 1.0
>> >> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> >> > usb7 at uhci5: USB revision 1.0
>> >> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> >> > isa0 at pcib0
>> >> > isadma0 at isa0
>> >> > pckbc0 at isa0 port 0x60/5
>> >> > pckbd0 at pckbc0 (kbd slot)
>> >> > pckbc0: using irq 1 for kbd slot
>> >> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> >> > pms0 at pckbc0 (aux slot)
>> >> > pckbc0: using irq 12 for aux slot
>> >> > wsmouse0 at pms0 mux 0
>> >> > wsmouse1 at pms0 mux 0
>> >> > pms0: Synaptics touchpad, firmware 7.0
>> >> > pcppi0 at isa0 port 0x61
>> >> > spkr0 at pcppi0
>> >> > aps0 at isa0 port 0x1600/31
>> >> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
>> >> > mtrr: Pentium Pro MTRR support
>> >> > scsibus1 at sdmmc0: 2 targets, initiator 0
>> >> > sd1 at scsibus1 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
>> >> > sd1: 15199MB, 512 bytes/sector, 31127552 sectors
>> >> > uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2
>> >> > video0 at uvideo0
>> >> > ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
>> >> > ugen1 at uhub3 port 2 "Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II" rev 2.00/3.99 addr 3
>> >> > vscsi0 at root
>> >> > scsibus2 at vscsi0: 256 targets
>> >> > softraid0 at root
>> >> > scsibus3 at softraid0: 256 targets
>> >> > root on sd0a (ec0193beaab07f52.a) swap on sd0b dump on sd0
>> >> >
>> >> >
>> >> > thanks,
>> >> >
>> >> > chris.
>> >> >
>> >
>> > Hi Tomas,
>> >
>> > Thanks for the response.
>> >
>> > I connected a usb memory stick to the same usb port I was attempting to connect
>> > the external hard drive to and recieved the messages below. This leads me
>> > to believe the port is fine and it is the drive/connection is not compatible for some reason.
>> >
>> > # /var/log/messages
>> > openbox /bsd: umass0 at uhub1
>> > openbox /bsd:  port 2 configuration 1 interface 0 "SanDisk U3 Cruzer Micro" rev 2.00/0.10 addr 2
>> > openbox /bsd: umass0: using SCSI over Bulk-Only
>> > openbox /bsd: scsibus4 at umass0: 2 targets, initiator 0
>> > openbox /bsd: sd2 at scsibus4 targ 1 lun 0: <SanDisk, U3 Cruzer Micro, 4.05> SCSI2 0/direct removable
>> > openbox /bsd: sd2: 3912MB, 512 bytes/sector, 8013453 sectors
>> > openbox /bsd: cd1 at scsibus4 targ 1 lun 1: <SanDisk, U3 Cruzer Micro, 4.05> SCSI2 5/cdrom removabl
>> >
>> > The strange thing is that this drive works fine when connecting to a windows machine,
>> > so the drive itself is not faulty.  Are there any further diagnostics I can perform to
>> > troubleshoot this issue, or should I consider this simply not a compatble device?
>>
>> Check man usbdevs and try to get more details about your device when
>> connected with that command. You can try to install usbutil package as
>> well which have some more utilites. There's usbutils as well, but
>> seems like it doesn't have all commands as usbutil. All of them can
>> provide more details about your HW if possible to get them of course.
>> Which filesystem is on your device and what product is that? Can you
>> check with scandisk or whatever for errors?
>>
>> >
>> > thanks,
>> >
>> > chris.
>
> Thanks for the hints. Here is a bit more information on the device.
>
> External 2.5" Western Digital SATA drive / INEO USB 3.0 enclosure connected
> to a USB 2.0 port on my Lenovo W500. The external drive is formatted as NTFS.
> I'm reading a few posts on the internet which indicate that OpenBSD does not
> currently support USB 3.0. Not sure if this is the issue I have or not. I'll
> hopefuly be able to test later this week with a USB 2.0 enclosure.
>
> From what I can tell there is little to no information which I can probe
> from the device when connected. Any futher thoughts or should I wait until
> this can be tested with a USB 2.0 enclosure? Thanks again.

But USB is supposed to switch to lower mode if possible. Maybe it's
not possible with your HW :-) Anyway, can you test with latest
snapshot as well and not 5.1 if there's some difference?


>
> # output from usbdevs -dv; external drive is not present/recognized
> Controller /dev/usb0:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00
>   uhub0
>  port 1 powered
>  port 2 powered
>  port 3 powered
>  port 4 powered
>  port 5 powered
>  port 6 addr 2: high speed, power 100 mA, config 1, product 0x4807(0x4807), Chicony Electronics Co., Ltd.(0x17ef), rev 31.34
>    uvideo0
> Controller /dev/usb1:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00
>   uhub1
>  port 1 powered
>  port 2 powered
>  port 3 powered
>  port 4 powered
>  port 5 powered
>  port 6 powered
> Controller /dev/usb2:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
>   uhub2
>  port 1 powered
>  port 2 powered
> Controller /dev/usb3:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
>   uhub3
>  port 1 addr 2: full speed, power 100 mA, config 1, Fingerprint Sensor(0x2810), AuthenTec(0x08ff), rev 17.03
>    ugen0
>  port 2 addr 3: full speed, self powered, config 1, ThinkPad Bluetooth with Enhanced Data Rate II(0x2145), Lenovo Computer Corp(0x0a5c), rev 3.99
>    ugen1
> Controller /dev/usb4:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
>   uhub4
>  port 1 powered
>  port 2 powered
> Controller /dev/usb5:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
>   uhub5
>  port 1 powered
>  port 2 powered
> Controller /dev/usb6:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
>   uhub6
>  port 1 powered
>  port 2 powered
> Controller /dev/usb7:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
>   uhub7
>  port 1 powered
>  port 2 powered
>
> # output from usbstats
>  Controller /dev/usb0:
>        147 control
>          0 isochronous
>          0 bulk
>          3 interrupt
> Controller /dev/usb1:
>        395 control
>          0 isochronous
>        308 bulk
>         20 interrupt
> Controller /dev/usb2:
>         73 control
>          0 isochronous
>          0 bulk
>          0 interrupt
> Controller /dev/usb3:
>        245 control
>          0 isochronous
>          0 bulk
>          9 interrupt
> Controller /dev/usb4:
>         73 control
>          0 isochronous
>          0 bulk
>          0 interrupt
> Controller /dev/usb5:
>        276 control
>          0 isochronous
>          0 bulk
>         23 interrupt
> Controller /dev/usb6:
>         73 control
>          0 isochronous
>          0 bulk
>          0 interrupt
> Controller /dev/usb7:
>         73 control
>          0 isochronous
>          0 bulk
>          0 interrupt
>
> usbctl -a 2 -f /dev/usb5 does not give me anything.

Reply | Threaded
Open this post in threaded view
|

Re: uhub error

Chris Chung-2
On Mon, Nov 12, 2012 at 07:14:52AM +0100, Tomas Bodzar wrote:

> On Mon, Nov 12, 2012 at 12:11 AM, Chris Chung <[hidden email]> wrote:
> > On Sun, Nov 11, 2012 at 07:05:43PM +0100, Tomas Bodzar wrote:
> >> On Sun, Nov 11, 2012 at 5:15 PM, Chris Chung <[hidden email]> wrote:
> >> > On Sun, Nov 11, 2012 at 08:14:49AM +0100, Tomas Bodzar wrote:
> >> >> On Sun, Nov 11, 2012 at 2:53 AM, Chris Chung <[hidden email]> wrote:
> >> >> > Hello,
> >> >> >
> >> >> > When attempting to connect an external hard drive through a usb port I'm
> >> >> > receiving the error below. I can sucessfully mount my dvd drive and sd memory
> >> >> > cards without issue. This could be a hardware issue, but I'm not
> >> >> > sure. I have read the relevant FAQ sections along with the man pages for
> >> >> > disklabel and mount but still at a loss, so any additional insights would be appreciated.
> >> >> >
> >> >> > # /var/log/messages
> >> >> > openbox /bsd: uhub5: device problem, disabling port 2
> >> >> >
> >> >>
> >> >> From code http://www.openbsd.org/cgi-bin/cvsweb/src/sys/dev/usb/uhub.c?rev=1.59
> >> >>
> >> >> if (err) {
> >> >>                       DPRINTFN(-1,("uhub_explore: usbd_new_device failed, "
> >> >>                                    "error=%s\n", usbd_errstr(err)));
> >> >>                       /* Avoid addressing problems by disabling. */
> >> >>                       /* usbd_reset_port(dev, port, &up->status); */
> >> >>
> >> >>                       /*
> >> >>                        * The unit refused to accept a new address, or had
> >> >>                        * some other serious problem.  Since we cannot leave
> >> >>                        * at 0 we have to disable the port instead.
> >> >>                        */
> >> >>                       printf("%s: device problem, disabling port %d\n",
> >> >>                              sc->sc_dev.dv_xname, port);
> >> >>                       usbd_clear_port_feature(dev, port, UHF_PORT_ENABLE);
> >> >>
> >> >> > # dmesg
> >> >> > OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012
> >> >> >     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> >> >> > cpu0: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
> >> >> > cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF
> >> >> > real mem  = 3178491904 (3031MB)
> >> >> > avail mem = 3116384256 (2972MB)
> >> >> > mainbus0 at root
> >> >> > bios0 at mainbus0: AT/286+ BIOS, date 03/17/11, BIOS32 rev. 0 @ 0xfdc50, SMBIOS rev. 2.4 @ 0xe0010 (80 entries)
> >> >> > bios0: vendor LENOVO version "6FET88WW (3.18 )" date 03/17/2011
> >> >> > bios0: LENOVO 4063HK6
> >> >> > acpi0 at bios0: rev 2
> >> >> > acpi0: sleep states S0 S3 S4 S5
> >> >> > acpi0: tables DSDT FACP SSDT ECDT APIC MCFG HPET SLIC BOOT ASF! SSDT TCPA SSDT SSDT SSDT
> >> >> > acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) IGBE(S4) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) EXP4(S4) PCI1(S4) USB0(S3) USB3(S3) USB5(S3) EHC0(S3) EHC1(S3) HDEF(S4)
> >> >> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> >> >> > acpiec0 at acpi0
> >> >> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> >> >> > cpu0 at mainbus0: apid 0 (boot processor)
> >> >> > cpu0: apic clock running at 266MHz
> >> >> > cpu1 at mainbus0: apid 1 (application processor)
> >> >> > cpu1: Intel(R) Core(TM)2 Duo CPU P9600 @ 2.66GHz ("GenuineIntel" 686-class) 2.67 GHz
> >> >> > cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,XSAVE,LAHF
> >> >> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> >> >> > ioapic0: misconfigured as apic 2, remapped to apid 1
> >> >> > acpimcfg0 at acpi0 addr 0xe0000000, bus 0-63
> >> >> > acpihpet0 at acpi0: 14318179 Hz
> >> >> > acpiprt0 at acpi0: bus 0 (PCI0)
> >> >> > acpiprt1 at acpi0: bus -1 (AGP_)
> >> >> > acpiprt2 at acpi0: bus 2 (EXP0)
> >> >> > acpiprt3 at acpi0: bus 3 (EXP1)
> >> >> > acpiprt4 at acpi0: bus -1 (EXP2)
> >> >> > acpiprt5 at acpi0: bus 5 (EXP3)
> >> >> > acpiprt6 at acpi0: bus 13 (EXP4)
> >> >> > acpiprt7 at acpi0: bus 21 (PCI1)
> >> >> > acpicpu0 at acpi0: C3, C2, C1, PSS
> >> >> > acpicpu1 at acpi0: C3, C2, C1, PSS
> >> >> > acpipwrres0 at acpi0: PUBS
> >> >> > acpitz0 at acpi0: critical temperature is 127 degC
> >> >> > acpitz1 at acpi0: critical temperature is 100 degC
> >> >> > acpibtn0 at acpi0: LID_
> >> >> > acpibtn1 at acpi0: SLPB
> >> >> > acpibat0 at acpi0: BAT0 model "42T4620" serial  1283 type LION oem "Panasonic"
> >> >> > acpibat1 at acpi0: BAT1 not present
> >> >> > acpiac0 at acpi0: AC unit offline
> >> >> > acpithinkpad0 at acpi0
> >> >> > acpidock0 at acpi0: GDCK not docked (0)
> >> >> > bios0: ROM list: 0xc0000/0x10000! 0xd0000/0x1000 0xd1000/0x1000 0xd2000/0x1000 0xde000/0x1800! 0xe0000/0x10000
> >> >> > cpu0: Enhanced SpeedStep 2661 MHz: speeds: 2667, 2666, 2133, 1600, 800 MHz
> >> >> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> >> >> > pchb0 at pci0 dev 0 function 0 "Intel GM45 Host" rev 0x07
> >> >> > vga1 at pci0 dev 2 function 0 "Intel GM45 Video" rev 0x07
> >> >> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> >> >> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> >> >> > intagp0 at vga1
> >> >> > agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
> >> >> > inteldrm0 at vga1: apic 1 int 16
> >> >> > drm0 at inteldrm0
> >> >> > "Intel GM45 Video" rev 0x07 at pci0 dev 2 function 1 not configured
> >> >> > "Intel GM45 HECI" rev 0x07 at pci0 dev 3 function 0 not configured
> >> >> > puc0 at pci0 dev 3 function 3 "Intel GM45 AMT SOL" rev 0x07: ports: 1 com
> >> >> > com3 at puc0 port 0 apic 1 int 17: ns16550a, 16 byte fifo
> >> >> > com3: probed fifo depth: 0 bytes
> >> >> > em0 at pci0 dev 25 function 0 "Intel ICH9 IGP M AMT" rev 0x03: msi, address 00:22:68:11:dc:fd
> >> >> > uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 20
> >> >> > uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 21
> >> >> > uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 22
> >> >> > ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 23
> >> >> > usb0 at ehci0: USB revision 2.0
> >> >> > uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> >> >> > azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x03: msi
> >> >> > azalia0: codecs: Conexant CX20561, Conexant/0x2c06, using Conexant CX20561
> >> >> > audio0 at azalia0
> >> >> > ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x03: apic 1 int 20
> >> >> > pci1 at ppb0 bus 2
> >> >> > ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x03: apic 1 int 21
> >> >> > pci2 at ppb1 bus 3
> >> >> > iwn0 at pci2 dev 0 function 0 "Intel WiFi Link 5300" rev 0x00: msi, MIMO 3T3R, MoW, address 00:21:6a:11:5a:be
> >> >> > ppb2 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x03: apic 1 int 23
> >> >> > pci3 at ppb2 bus 5
> >> >> > ppb3 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x03: apic 1 int 20
> >> >> > pci4 at ppb3 bus 13
> >> >> > uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x03: apic 1 int 16
> >> >> > uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x03: apic 1 int 17
> >> >> > uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x03: apic 1 int 18
> >> >> > ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x03: apic 1 int 19
> >> >> > usb1 at ehci1: USB revision 2.0
> >> >> > uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> >> >> > ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x93
> >> >> > pci5 at ppb4 bus 21
> >> >> > cbb0 at pci5 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0xba: apic 1 int 16
> >> >> > "Ricoh 5C832 Firewire" rev 0x04 at pci5 dev 0 function 1 not configured
> >> >> > sdhc0 at pci5 dev 0 function 2 "Ricoh 5C822 SD/MMC" rev 0x21: apic 1 int 18
> >> >> > sdmmc0 at sdhc0
> >> >> > "Ricoh 5C843 MMC" rev 0x11 at pci5 dev 0 function 3 not configured
> >> >> > "Ricoh 5C592 Memory Stick" rev 0x11 at pci5 dev 0 function 4 not configured
> >> >> > "Ricoh 5C852 xD" rev 0x11 at pci5 dev 0 function 5 not configured
> >> >> > cardslot0 at cbb0 slot 0 flags 0
> >> >> > cardbus0 at cardslot0: bus 22 device 0 cacheline 0x10, lattimer 0xb0
> >> >> > pcmcia0 at cardslot0
> >> >> > pcib0 at pci0 dev 31 function 0 "Intel 82801IEM LPC" rev 0x03
> >> >> > ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x03: msi, AHCI 1.2
> >> >> > scsibus0 at ahci0: 32 targets
> >> >> > sd0 at scsibus0 targ 0 lun 0: <ATA, ST9500420AS, 0003> SCSI3 0/direct fixed naa.5000c5002edad677
> >> >> > sd0: 476940MB, 512 bytes/sector, 976773168 sectors
> >> >> > cd0 at scsibus0 targ 1 lun 0: <HL-DT-ST, DVDRAM GU10N, MX05> ATAPI 5/cdrom removable
> >> >> > ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x03: apic 1 int 23
> >> >> > iic0 at ichiic0
> >> >> > usb2 at uhci0: USB revision 1.0
> >> >> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> >> > usb3 at uhci1: USB revision 1.0
> >> >> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> >> > usb4 at uhci2: USB revision 1.0
> >> >> > uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> >> > usb5 at uhci3: USB revision 1.0
> >> >> > uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> >> > usb6 at uhci4: USB revision 1.0
> >> >> > uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> >> > usb7 at uhci5: USB revision 1.0
> >> >> > uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> >> > isa0 at pcib0
> >> >> > isadma0 at isa0
> >> >> > pckbc0 at isa0 port 0x60/5
> >> >> > pckbd0 at pckbc0 (kbd slot)
> >> >> > pckbc0: using irq 1 for kbd slot
> >> >> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> >> >> > pms0 at pckbc0 (aux slot)
> >> >> > pckbc0: using irq 12 for aux slot
> >> >> > wsmouse0 at pms0 mux 0
> >> >> > wsmouse1 at pms0 mux 0
> >> >> > pms0: Synaptics touchpad, firmware 7.0
> >> >> > pcppi0 at isa0 port 0x61
> >> >> > spkr0 at pcppi0
> >> >> > aps0 at isa0 port 0x1600/31
> >> >> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> >> >> > mtrr: Pentium Pro MTRR support
> >> >> > scsibus1 at sdmmc0: 2 targets, initiator 0
> >> >> > sd1 at scsibus1 targ 1 lun 0: <SD/MMC, Drive #01, > SCSI2 0/direct fixed
> >> >> > sd1: 15199MB, 512 bytes/sector, 31127552 sectors
> >> >> > uvideo0 at uhub0 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. product 0x4807" rev 2.00/31.34 addr 2
> >> >> > video0 at uvideo0
> >> >> > ugen0 at uhub3 port 1 "AuthenTec Fingerprint Sensor" rev 2.00/17.03 addr 2
> >> >> > ugen1 at uhub3 port 2 "Lenovo Computer Corp ThinkPad Bluetooth with Enhanced Data Rate II" rev 2.00/3.99 addr 3
> >> >> > vscsi0 at root
> >> >> > scsibus2 at vscsi0: 256 targets
> >> >> > softraid0 at root
> >> >> > scsibus3 at softraid0: 256 targets
> >> >> > root on sd0a (ec0193beaab07f52.a) swap on sd0b dump on sd0
> >> >> >
> >> >> >
> >> >> > thanks,
> >> >> >
> >> >> > chris.
> >> >> >
> >> >
> >> > Hi Tomas,
> >> >
> >> > Thanks for the response.
> >> >
> >> > I connected a usb memory stick to the same usb port I was attempting to connect
> >> > the external hard drive to and recieved the messages below. This leads me
> >> > to believe the port is fine and it is the drive/connection is not compatible for some reason.
> >> >
> >> > # /var/log/messages
> >> > openbox /bsd: umass0 at uhub1
> >> > openbox /bsd:  port 2 configuration 1 interface 0 "SanDisk U3 Cruzer Micro" rev 2.00/0.10 addr 2
> >> > openbox /bsd: umass0: using SCSI over Bulk-Only
> >> > openbox /bsd: scsibus4 at umass0: 2 targets, initiator 0
> >> > openbox /bsd: sd2 at scsibus4 targ 1 lun 0: <SanDisk, U3 Cruzer Micro, 4.05> SCSI2 0/direct removable
> >> > openbox /bsd: sd2: 3912MB, 512 bytes/sector, 8013453 sectors
> >> > openbox /bsd: cd1 at scsibus4 targ 1 lun 1: <SanDisk, U3 Cruzer Micro, 4.05> SCSI2 5/cdrom removabl
> >> >
> >> > The strange thing is that this drive works fine when connecting to a windows machine,
> >> > so the drive itself is not faulty.  Are there any further diagnostics I can perform to
> >> > troubleshoot this issue, or should I consider this simply not a compatble device?
> >>
> >> Check man usbdevs and try to get more details about your device when
> >> connected with that command. You can try to install usbutil package as
> >> well which have some more utilites. There's usbutils as well, but
> >> seems like it doesn't have all commands as usbutil. All of them can
> >> provide more details about your HW if possible to get them of course.
> >> Which filesystem is on your device and what product is that? Can you
> >> check with scandisk or whatever for errors?
> >>
> >> >
> >> > thanks,
> >> >
> >> > chris.
> >
> > Thanks for the hints. Here is a bit more information on the device.
> >
> > External 2.5" Western Digital SATA drive / INEO USB 3.0 enclosure connected
> > to a USB 2.0 port on my Lenovo W500. The external drive is formatted as NTFS.
> > I'm reading a few posts on the internet which indicate that OpenBSD does not
> > currently support USB 3.0. Not sure if this is the issue I have or not. I'll
> > hopefuly be able to test later this week with a USB 2.0 enclosure.
> >
> > From what I can tell there is little to no information which I can probe
> > from the device when connected. Any futher thoughts or should I wait until
> > this can be tested with a USB 2.0 enclosure? Thanks again.
>
> But USB is supposed to switch to lower mode if possible. Maybe it's
> not possible with your HW :-) Anyway, can you test with latest
> snapshot as well and not 5.1 if there's some difference?
>
>
> >
> > # output from usbdevs -dv; external drive is not present/recognized
> > Controller /dev/usb0:
> > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00
> >   uhub0
> >  port 1 powered
> >  port 2 powered
> >  port 3 powered
> >  port 4 powered
> >  port 5 powered
> >  port 6 addr 2: high speed, power 100 mA, config 1, product 0x4807(0x4807), Chicony Electronics Co., Ltd.(0x17ef), rev 31.34
> >    uvideo0
> > Controller /dev/usb1:
> > addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00
> >   uhub1
> >  port 1 powered
> >  port 2 powered
> >  port 3 powered
> >  port 4 powered
> >  port 5 powered
> >  port 6 powered
> > Controller /dev/usb2:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
> >   uhub2
> >  port 1 powered
> >  port 2 powered
> > Controller /dev/usb3:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
> >   uhub3
> >  port 1 addr 2: full speed, power 100 mA, config 1, Fingerprint Sensor(0x2810), AuthenTec(0x08ff), rev 17.03
> >    ugen0
> >  port 2 addr 3: full speed, self powered, config 1, ThinkPad Bluetooth with Enhanced Data Rate II(0x2145), Lenovo Computer Corp(0x0a5c), rev 3.99
> >    ugen1
> > Controller /dev/usb4:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
> >   uhub4
> >  port 1 powered
> >  port 2 powered
> > Controller /dev/usb5:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
> >   uhub5
> >  port 1 powered
> >  port 2 powered
> > Controller /dev/usb6:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
> >   uhub6
> >  port 1 powered
> >  port 2 powered
> > Controller /dev/usb7:
> > addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
> >   uhub7
> >  port 1 powered
> >  port 2 powered
> >
> > # output from usbstats
> >  Controller /dev/usb0:
> >        147 control
> >          0 isochronous
> >          0 bulk
> >          3 interrupt
> > Controller /dev/usb1:
> >        395 control
> >          0 isochronous
> >        308 bulk
> >         20 interrupt
> > Controller /dev/usb2:
> >         73 control
> >          0 isochronous
> >          0 bulk
> >          0 interrupt
> > Controller /dev/usb3:
> >        245 control
> >          0 isochronous
> >          0 bulk
> >          9 interrupt
> > Controller /dev/usb4:
> >         73 control
> >          0 isochronous
> >          0 bulk
> >          0 interrupt
> > Controller /dev/usb5:
> >        276 control
> >          0 isochronous
> >          0 bulk
> >         23 interrupt
> > Controller /dev/usb6:
> >         73 control
> >          0 isochronous
> >          0 bulk
> >          0 interrupt
> > Controller /dev/usb7:
> >         73 control
> >          0 isochronous
> >          0 bulk
> >          0 interrupt
> >
> > usbctl -a 2 -f /dev/usb5 does not give me anything.
> >

Upgraded from 5.1 to 5.2, but having the same problem. Is there any reason current
may give a different result relative to 5.2? I'll test with a USB 2.0 enclosure
shortly and report back.

thanks,

chris.