ttyC0 floods with error messages

classic Classic list List threaded Threaded
9 messages Options
Reply | Threaded
Open this post in threaded view
|

ttyC0 floods with error messages

putridsoul66
After boot, the following error message floods the virtual console on
ttyC0 repeatedly, rest of virtuals console stay clear somehow. Is there a way to
treat this permanently, other than Ctrl-l everytime, or disconnecting the mouse.
There must be some config to disable this direct dumping of errors onto console.

wsmouse0 at ums0 mux 0
wsmouse0 detached
ums0 detached
uhidev2 detached
uhidev2 at uhub5 port 2 configuration 1 interface 0 "Logitech USB Optical
Mouse" rev 2.00/72.00 addr 3
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir

Reply | Threaded
Open this post in threaded view
|

Re: ttyC0 floods with error messages

Clay Daniels
On Fri, 13 Dec 2019, [hidden email] wrote:

> Date: Fri, 13 Dec 2019 19:12:41 +0530 (IST)
> From: [hidden email]
> To: [hidden email]
> Subject: ttyC0 floods with error messages
>
> After boot, the following error message floods the virtual console on
> ttyC0 repeatedly, rest of virtuals console stay clear somehow. Is there a way to
> treat this permanently, other than Ctrl-l everytime, or disconnecting the mouse.
> There must be some config to disable this direct dumping of errors onto console.
>
> wsmouse0 at ums0 mux 0
> wsmouse0 detached
> ums0 detached
> uhidev2 detached
> uhidev2 at uhub5 port 2 configuration 1 interface 0 "Logitech USB Optical
> Mouse" rev 2.00/72.00 addr 3
> uhidev2: iclass 3/1
> ums0 at uhidev2: 3 buttons, Z dir

For some reason the same happens to me with both OpenBSD & NetBSD, but not
with FreeBSD which is rock solid. I tend to just jump up to tty2 or whatever.
Of course you can't do that on the installation.

Good Luck,
Clay

  [hidden email]
SDF Public Access UNIX System - http://sdf.org

Reply | Threaded
Open this post in threaded view
|

Re: ttyC0 floods with error messages

Kenneth Gober
In reply to this post by putridsoul66
On Fri, Dec 13, 2019 at 8:42 AM <[hidden email]> wrote:

> After boot, the following error message floods the virtual console on
> ttyC0 repeatedly, rest of virtuals console stay clear somehow. Is there a
> way to
> treat this permanently, other than Ctrl-l everytime, or disconnecting the
> mouse.
> There must be some config to disable this direct dumping of errors onto
> console.
>
> wsmouse0 at ums0 mux 0
> wsmouse0 detached
> ums0 detached
> uhidev2 detached
> uhidev2 at uhub5 port 2 configuration 1 interface 0 "Logitech USB Optical
> Mouse" rev 2.00/72.00 addr 3
> uhidev2: iclass 3/1
> ums0 at uhidev2: 3 buttons, Z dir
>

In my experience when the console is spammed by mouse detach and attach
events, it's because the mouse is defective, usually because the cable is
wearing out and developing an intermittent fault.  Switch to a different
mouse,
even if the mouse appears to work ok, because it will probably get worse.

Another reason for these messages is because you're using a KVM switch that
performs the switch operation by disconnecting/reconnecting your USB
devices,
but I assume that isn't the cause here.

Suppressing the errors is probably a bad idea, in that case how would you
know
your mouse is developing a fault until more serious problems arise?  Better
to
be notified early so you have time to deal with it.

-ken
Reply | Threaded
Open this post in threaded view
|

Re: ttyC0 floods with error messages

putridsoul66
In reply to this post by putridsoul66
The error does not seem to be a faulty mouse and I
don't use a KVM switch anyway so it is not the source.
Following on pervious reply, I tried on a new mouse.
But was greeted with the same error:

wsmouse0 detached
ums0 detached
uhidev0 detached
uhidev0 at uhub0 port 4 configuration 1 interface 0 "PixArt USB Optical Mouse" rev 2.00/1.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0

Unless I'm the unfortunate person destined to own all faulty
mice in the world, I look forward to a solution. Is there
anyone here who uses a desktop setup with a mouse, not greeted
with these pesky errors. Are experts on here sure this is not
a bug, or lack of proper driver. More info on the latter, this
test consisted of Logitech M90 and Dell MS111-P mouse.

Reply | Threaded
Open this post in threaded view
|

Re: ttyC0 floods with error messages

Raymond, David
I get similar stuff on console 1 but not on the others on all my
OpenBSD machines.  As I use X windows and have clean consoles 2-4
available if necessary, I just ignore it.

Dave Raymond


On 12/16/19, [hidden email] <[hidden email]> wrote:

> The error does not seem to be a faulty mouse and I
> don't use a KVM switch anyway so it is not the source.
> Following on pervious reply, I tried on a new mouse.
> But was greeted with the same error:
>
> wsmouse0 detached
> ums0 detached
> uhidev0 detached
> uhidev0 at uhub0 port 4 configuration 1 interface 0 "PixArt USB Optical
> Mouse" rev 2.00/1.00 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
>
> Unless I'm the unfortunate person destined to own all faulty
> mice in the world, I look forward to a solution. Is there
> anyone here who uses a desktop setup with a mouse, not greeted
> with these pesky errors. Are experts on here sure this is not
> a bug, or lack of proper driver. More info on the latter, this
> test consisted of Logitech M90 and Dell MS111-P mouse.
>
>


--
David J. Raymond
[hidden email]
http://physics.nmt.edu/~raymond

Reply | Threaded
Open this post in threaded view
|

Re: ttyC0 floods with error messages

Theo de Raadt-2
USB subsystem bugs.

Whoever said it was your mouse or cable is being an inaccurate jerk.


Raymond, David <[hidden email]> wrote:

> I get similar stuff on console 1 but not on the others on all my
> OpenBSD machines.  As I use X windows and have clean consoles 2-4
> available if necessary, I just ignore it.
>
> Dave Raymond
>
>
> On 12/16/19, [hidden email] <[hidden email]> wrote:
> > The error does not seem to be a faulty mouse and I
> > don't use a KVM switch anyway so it is not the source.
> > Following on pervious reply, I tried on a new mouse.
> > But was greeted with the same error:
> >
> > wsmouse0 detached
> > ums0 detached
> > uhidev0 detached
> > uhidev0 at uhub0 port 4 configuration 1 interface 0 "PixArt USB Optical
> > Mouse" rev 2.00/1.00 addr 2
> > uhidev0: iclass 3/1
> > ums0 at uhidev0: 3 buttons, Z dir
> > wsmouse0 at ums0 mux 0
> >
> > Unless I'm the unfortunate person destined to own all faulty
> > mice in the world, I look forward to a solution. Is there
> > anyone here who uses a desktop setup with a mouse, not greeted
> > with these pesky errors. Are experts on here sure this is not
> > a bug, or lack of proper driver. More info on the latter, this
> > test consisted of Logitech M90 and Dell MS111-P mouse.
> >
> >
>
>
> --
> David J. Raymond
> [hidden email]
> http://physics.nmt.edu/~raymond
>

Reply | Threaded
Open this post in threaded view
|

Re: ttyC0 floods with error messages

Luke A. Call
In reply to this post by Raymond, David
On 12-16 10:48, Raymond, David wrote:
> I get similar stuff on console 1 but not on the others on all my
> OpenBSD machines.  As I use X windows and have clean consoles 2-4
> available if necessary, I just ignore it.

I get similar messages in dmesg (used to be on the first console),
and every couple of days or so (not a consistent period), the mouse
just stops working, sometimes working again a few days after I
unplug it, so I switch that way between a wireless and wired mouse
until they both stop and when I get tired enough of being mouseless
then I reboot.

Ending message with dmesg output:

OpenBSD 6.5 (GENERIC.MP) #5: Thu Aug 29 20:38:30 CEST 2019
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16033533952 (15290MB)
avail mem = 15537967104 (14818MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebf90 (49 entries)
bios0: vendor American Megatrends Inc. version "204" date 11/20/2014
bios0: ASUSTeK COMPUTER INC. X550ZA
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT ECDT MCFG MSDM HPET UEFI SSDT SSDT CRAT SSDT SSDT SSDT SSDT
acpi0: wakeup devices LOM_(S4) SBAZ(S4) ECIR(S4) OHC1(S4) EHC1(S4) OHC2(S4) EHC2(S4) OHC3(S4) EHC3(S4) OHC4(S4) XHC0(S4) XHC1(S4) ODD8(S3) GLAN(S4) LID_(S5) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 16 (boot processor)
cpu0: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2496.48 MHz, 15-30-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu0: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 17 (application processor)
cpu1: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu1: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu1: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu1: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 18 (application processor)
cpu2: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu2: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu2: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu2: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 19 (application processor)
cpu3: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu3: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu3: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu3: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins
ioapic1 at mainbus0: apid 1 pa 0xfec01000, version 21, 32 pins
acpiec0 at acpi0
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB21)
acpiprt2 at acpi0: bus -1 (PB22)
acpiprt3 at acpi0: bus -1 (PB31)
acpiprt4 at acpi0: bus -1 (PB32)
acpiprt5 at acpi0: bus -1 (PB33)
acpiprt6 at acpi0: bus -1 (PB34)
acpiprt7 at acpi0: bus 2 (PE20)
acpiprt8 at acpi0: bus -1 (PE21)
acpiprt9 at acpi0: bus 3 (PE22)
acpiprt10 at acpi0: bus -1 (PE23)
acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpitz0 at acpi0: critical temperature is 103 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"AMDC003" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "X550E30" serial    type LIon oem "OEM"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID_
"ATK4001" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn2 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
cpu0: 2496 MHz: speeds: 2500 2300 2100 1700 1400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 15h Root Complex" rev 0x00
radeondrm0 at pci0 dev 1 function 0 "ATI Kaveri Radeon R6" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 1 function 1 "ATI Kaveri HD Audio" rev 0x00: msi
azalia0: no supported codecs
pchb1 at pci0 dev 2 function 0 "AMD AMD64 15h PCIE" rev 0x00
pchb2 at pci0 dev 3 function 0 "AMD AMD64 15h PCIE" rev 0x00
pchb3 at pci0 dev 4 function 0 "AMD AMD64 15h PCIE" rev 0x00
xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x09: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 addr 1
ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 2: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MQ01ABD1, AX0R> SCSI3 0/direct fixed naa.5000039614b041b8
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 2 lun 0: <MATSHITA, DVD-RAM UJ8G6, 1.00> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x16: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
azalia1 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x01: msi
azalia1: codecs: Realtek ALC269
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
ppb0 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40
pci1 at ppb0 bus 1
sdhc0 at pci0 dev 20 function 7 "AMD Hudson-2 SD Host Controller" rev 0x00: apic 0 int 16
sdhc0: SDHC 2.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ppb1 at pci0 dev 21 function 0 "AMD Hudson-2 PCIE" rev 0x00
pci2 at ppb1 bus 2
ppb2 at pci0 dev 21 function 2 "AMD Hudson-2 PCIE" rev 0x00
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00), msi, address 1c:b7:2c:22:fb:c9
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
pchb4 at pci0 dev 24 function 0 "AMD AMD64 15h Link Cfg" rev 0x00
pchb5 at pci0 dev 24 function 1 "AMD AMD64 15h Address Map" rev 0x00
pchb6 at pci0 dev 24 function 2 "AMD AMD64 15h DRAM Cfg" rev 0x00
pchb7 at pci0 dev 24 function 3 "AMD AMD64 15h Misc Cfg" rev 0x00
pchb8 at pci0 dev 24 function 4 "AMD AMD64 15h CPU Power" rev 0x00
pchb9 at pci0 dev 24 function 5 "AMD AMD64 15h Misc Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: SVM/RVI
efifb at mainbus0 not configured
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Kinesis Advantage2 Keyboard" rev 2.00/1.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 3 configuration 1 interface 1 "Kinesis Advantage2 Keyboard" rev 2.00/1.00 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev2 at uhub0 port 3 configuration 1 interface 2 "Kinesis Advantage2 Keyboard" rev 2.00/1.00 addr 2
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
uhub5 at uhub1 port 1 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" rev 2.00/92.24 addr 2
uhub5: device problem, disabling port 1
uhidev4 at uhub5 port 3 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev4: iclass 3/1
ukbd1 at uhidev4: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
uhidev5 at uhub5 port 3 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev5: iclass 3/1, 8 report ids
ums2 at uhidev5 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums2 mux 0
uhid2 at uhidev5 reportid 3: input=4, output=0, feature=0
uhid3 at uhidev5 reportid 4: input=1, output=0, feature=0
uhid4 at uhidev5 reportid 8: input=1, output=0, feature=0
uhidev6 at uhub5 port 3 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev6: iclass 3/0, 33 report ids
uhid5 at uhidev6 reportid 16: input=6, output=6, feature=0
uhid6 at uhidev6 reportid 17: input=19, output=19, feature=0
uhid7 at uhidev6 reportid 32: input=14, output=14, feature=0
uhid8 at uhidev6 reportid 33: input=31, output=31, feature=0
uvideo0 at uhub2 port 4 configuration 1 interface 0 "Chicony Electronics USB2.0 VGA UVC WebCam" rev 2.00/99.16 addr 2
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 953868MB, 512 bytes/sector, 1953523553 sectors
root on sd1a (6759d2c493c65bb1.a) swap on sd1b dump on sd1b
initializing kernel modesetting (KAVERI 0x1002:0x130D 0x1043:0x17FD).
radeondrm0: 1366x768, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ukbd1 detached
uhidev4 detached
wsmouse2 detached
ums2 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev5 detached
uhid5 detached
uhid6 detached
uhid7 detached
uhid8 detached
uhidev6 detached
iridium[87380]: pledge "rpath", syscall 5
iridium[71302]: pledge "rpath", syscall 5
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhub0: device problem, disabling port 4
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
uhidev4 at uhub5 port 3 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev4: iclass 3/1
ukbd1 at uhidev4: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev5 at uhub5 port 3 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev5: iclass 3/1, 8 report ids
ums2 at uhidev5 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums2 mux 0
uhid2 at uhidev5 reportid 3: input=4, output=0, feature=0
uhid3 at uhidev5 reportid 4: input=1, output=0, feature=0
uhid4 at uhidev5 reportid 8: input=1, output=0, feature=0
uhidev6 at uhub5 port 3 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev6: iclass 3/0, 33 report ids
uhid5 at uhidev6 reportid 16: input=6, output=6, feature=0
uhid6 at uhidev6 reportid 17: input=19, output=19, feature=0
uhid7 at uhidev6 reportid 32: input=14, output=14, feature=0
uhid8 at uhidev6 reportid 33: input=31, output=31, feature=0
wsmouse1 detached
ums1 detached
uhidev3 detached
usbd_free_xfer: xfer=0xfffffd843e83aa50 not free
uhub0: port 4, set config 0 at addr 3 failed
uhub0: device problem, disabling port 4
iridium[35721]: pledge "rpath", syscall 5
iridium[86927]: pledge "rpath", syscall 5
iridium[13830]: pledge "rpath", syscall 5
iridium[47143]: pledge "rpath", syscall 5
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
syncing disks... done
r
OpenBSD 6.5 (GENERIC.MP) #6: Thu Nov 14 15:51:20 MST 2019
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16033533952 (15290MB)
avail mem = 15537967104 (14818MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebf90 (49 entries)
bios0: vendor American Megatrends Inc. version "204" date 11/20/2014
bios0: ASUSTeK COMPUTER INC. X550ZA
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT ECDT MCFG MSDM HPET UEFI SSDT SSDT CRAT SSDT SSDT SSDT SSDT
acpi0: wakeup devices LOM_(S4) SBAZ(S4) ECIR(S4) OHC1(S4) EHC1(S4) OHC2(S4) EHC2(S4) OHC3(S4) EHC3(S4) OHC4(S4) XHC0(S4) XHC1(S4) ODD8(S3) GLAN(S4) LID_(S5) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 16 (boot processor)
cpu0: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2496.04 MHz, 15-30-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu0: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 17 (application processor)
cpu1: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu1: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu1: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu1: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 18 (application processor)
cpu2: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu2: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu2: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu2: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 19 (application processor)
cpu3: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu3: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu3: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu3: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins
ioapic1 at mainbus0: apid 1 pa 0xfec01000, version 21, 32 pins
acpiec0 at acpi0
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB21)
acpiprt2 at acpi0: bus -1 (PB22)
acpiprt3 at acpi0: bus -1 (PB31)
acpiprt4 at acpi0: bus -1 (PB32)
acpiprt5 at acpi0: bus -1 (PB33)
acpiprt6 at acpi0: bus -1 (PB34)
acpiprt7 at acpi0: bus 2 (PE20)
acpiprt8 at acpi0: bus -1 (PE21)
acpiprt9 at acpi0: bus 3 (PE22)
acpiprt10 at acpi0: bus -1 (PE23)
acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpitz0 at acpi0: critical temperature is 103 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"AMDC003" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "X550E30" serial    type LIon oem "OEM"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID_
"ATK4001" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn2 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
cpu0: 2496 MHz: speeds: 2500 2300 2100 1700 1400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 15h Root Complex" rev 0x00
radeondrm0 at pci0 dev 1 function 0 "ATI Kaveri Radeon R6" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 1 function 1 "ATI Kaveri HD Audio" rev 0x00: msi
azalia0: no supported codecs
pchb1 at pci0 dev 2 function 0 "AMD AMD64 15h PCIE" rev 0x00
pchb2 at pci0 dev 3 function 0 "AMD AMD64 15h PCIE" rev 0x00
pchb3 at pci0 dev 4 function 0 "AMD AMD64 15h PCIE" rev 0x00
xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x09: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 addr 1
ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 2: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MQ01ABD1, AX0R> SCSI3 0/direct fixed naa.5000039614b041b8
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 2 lun 0: <MATSHITA, DVD-RAM UJ8G6, 1.00> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x16: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
azalia1 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x01: msi
azalia1: codecs: Realtek ALC269
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
ppb0 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40
pci1 at ppb0 bus 1
sdhc0 at pci0 dev 20 function 7 "AMD Hudson-2 SD Host Controller" rev 0x00: apic 0 int 16
sdhc0: SDHC 2.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ppb1 at pci0 dev 21 function 0 "AMD Hudson-2 PCIE" rev 0x00
pci2 at ppb1 bus 2
ppb2 at pci0 dev 21 function 2 "AMD Hudson-2 PCIE" rev 0x00
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00), msi, address 1c:b7:2c:22:fb:c9
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
pchb4 at pci0 dev 24 function 0 "AMD AMD64 15h Link Cfg" rev 0x00
pchb5 at pci0 dev 24 function 1 "AMD AMD64 15h Address Map" rev 0x00
pchb6 at pci0 dev 24 function 2 "AMD AMD64 15h DRAM Cfg" rev 0x00
pchb7 at pci0 dev 24 function 3 "AMD AMD64 15h Misc Cfg" rev 0x00
pchb8 at pci0 dev 24 function 4 "AMD AMD64 15h CPU Power" rev 0x00
pchb9 at pci0 dev 24 function 5 "AMD AMD64 15h Misc Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: SVM/RVI
efifb at mainbus0 not configured
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Kinesis Advantage2 Keyboard" rev 2.00/1.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 3 configuration 1 interface 1 "Kinesis Advantage2 Keyboard" rev 2.00/1.00 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev2 at uhub0 port 3 configuration 1 interface 2 "Kinesis Advantage2 Keyboard" rev 2.00/1.00 addr 2
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
uhub5 at uhub1 port 1 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" rev 2.00/92.24 addr 2
uhub5: device problem, disabling port 1
uvideo0 at uhub2 port 4 configuration 1 interface 0 "Chicony Electronics USB2.0 VGA UVC WebCam" rev 2.00/99.16 addr 2
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 953868MB, 512 bytes/sector, 1953523553 sectors
root on sd1a (6759d2c493c65bb1.a) swap on sd1b dump on sd1b
initializing kernel modesetting (KAVERI 0x1002:0x130D 0x1043:0x17FD).
radeondrm0: 1366x768, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iridium[32971]: pledge "rpath", syscall 5
iridium[75610]: pledge "rpath", syscall 5
iridium[29794]: pledge "rpath", syscall 5
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
usbd_free_xfer: xfer=0xfffffd843e83a0f0 not free
syncing disks... done
r
OpenBSD 6.5 (GENERIC.MP) #7: Wed Nov 20 23:21:48 MST 2019
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16033533952 (15290MB)
avail mem = 15537971200 (14818MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebf90 (49 entries)
bios0: vendor American Megatrends Inc. version "204" date 11/20/2014
bios0: ASUSTeK COMPUTER INC. X550ZA
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT ECDT MCFG MSDM HPET UEFI SSDT SSDT CRAT SSDT SSDT SSDT SSDT
acpi0: wakeup devices LOM_(S4) SBAZ(S4) ECIR(S4) OHC1(S4) EHC1(S4) OHC2(S4) EHC2(S4) OHC3(S4) EHC3(S4) OHC4(S4) XHC0(S4) XHC1(S4) ODD8(S3) GLAN(S4) LID_(S5) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 16 (boot processor)
cpu0: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2496.41 MHz, 15-30-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu0: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 17 (application processor)
cpu1: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.35 MHz, 15-30-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu1: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu1: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu1: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 18 (application processor)
cpu2: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.35 MHz, 15-30-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu2: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu2: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu2: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 19 (application processor)
cpu3: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.35 MHz, 15-30-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu3: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu3: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu3: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins
ioapic1 at mainbus0: apid 1 pa 0xfec01000, version 21, 32 pins
acpiec0 at acpi0
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB21)
acpiprt2 at acpi0: bus -1 (PB22)
acpiprt3 at acpi0: bus -1 (PB31)
acpiprt4 at acpi0: bus -1 (PB32)
acpiprt5 at acpi0: bus -1 (PB33)
acpiprt6 at acpi0: bus -1 (PB34)
acpiprt7 at acpi0: bus 2 (PE20)
acpiprt8 at acpi0: bus -1 (PE21)
acpiprt9 at acpi0: bus 3 (PE22)
acpiprt10 at acpi0: bus -1 (PE23)
acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpitz0 at acpi0: critical temperature is 103 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"AMDC003" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "X550E30" serial    type LIon oem "OEM"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID_
"ATK4001" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn2 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
cpu0: 2496 MHz: speeds: 2500 2300 2100 1700 1400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 15h Root Complex" rev 0x00
radeondrm0 at pci0 dev 1 function 0 "ATI Kaveri Radeon R6" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 1 function 1 "ATI Kaveri HD Audio" rev 0x00: msi
azalia0: no supported codecs
pchb1 at pci0 dev 2 function 0 "AMD AMD64 15h PCIE" rev 0x00
pchb2 at pci0 dev 3 function 0 "AMD AMD64 15h PCIE" rev 0x00
pchb3 at pci0 dev 4 function 0 "AMD AMD64 15h PCIE" rev 0x00
xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x09: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 addr 1
ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 2: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MQ01ABD1, AX0R> SCSI3 0/direct fixed naa.5000039614b041b8
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 2 lun 0: <MATSHITA, DVD-RAM UJ8G6, 1.00> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x16: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
azalia1 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x01: msi
azalia1: codecs: Realtek ALC269
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
ppb0 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40
pci1 at ppb0 bus 1
sdhc0 at pci0 dev 20 function 7 "AMD Hudson-2 SD Host Controller" rev 0x00: apic 0 int 16
sdhc0: SDHC 2.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ppb1 at pci0 dev 21 function 0 "AMD Hudson-2 PCIE" rev 0x00
pci2 at ppb1 bus 2
ppb2 at pci0 dev 21 function 2 "AMD Hudson-2 PCIE" rev 0x00
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00), msi, address 1c:b7:2c:22:fb:c9
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
pchb4 at pci0 dev 24 function 0 "AMD AMD64 15h Link Cfg" rev 0x00
pchb5 at pci0 dev 24 function 1 "AMD AMD64 15h Address Map" rev 0x00
pchb6 at pci0 dev 24 function 2 "AMD AMD64 15h DRAM Cfg" rev 0x00
pchb7 at pci0 dev 24 function 3 "AMD AMD64 15h Misc Cfg" rev 0x00
pchb8 at pci0 dev 24 function 4 "AMD AMD64 15h CPU Power" rev 0x00
pchb9 at pci0 dev 24 function 5 "AMD AMD64 15h Misc Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: SVM/RVI
efifb at mainbus0 not configured
uhidev0 at uhub0 port 3 configuration 1 interface 0 "Kinesis Advantage2 Keyboard" rev 2.00/1.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhidev1 at uhub0 port 3 configuration 1 interface 1 "Kinesis Advantage2 Keyboard" rev 2.00/1.00 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev2 at uhub0 port 3 configuration 1 interface 2 "Kinesis Advantage2 Keyboard" rev 2.00/1.00 addr 2
uhidev2: iclass 3/0, 2 report ids
uhid0 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev2 reportid 2: input=1, output=0, feature=0
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
uhub5 at uhub1 port 1 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" rev 2.00/92.24 addr 2
uhub5: device problem, disabling port 1
uvideo0 at uhub2 port 4 configuration 1 interface 0 "Chicony Electronics USB2.0 VGA UVC WebCam" rev 2.00/99.16 addr 2
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 953868MB, 512 bytes/sector, 1953523553 sectors
root on sd1a (6759d2c493c65bb1.a) swap on sd1b dump on sd1b
initializing kernel modesetting (KAVERI 0x1002:0x130D 0x1043:0x17FD).
radeondrm0: 1366x768, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
iridium[28996]: pledge "rpath", syscall 5
iridium[27705]: pledge "rpath", syscall 5
iridium[3056]: pledge "rpath", syscall 5
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1, 1 report id
ums1 at uhidev3 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev3 detached
uhidev3 at uhub5 port 3 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev4 at uhub5 port 3 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev4: iclass 3/1, 8 report ids
ums1 at uhidev4 reportid 2: 16 buttons, Z and W dir
wsmouse1 at ums1 mux 0
uhid2 at uhidev4 reportid 3: input=4, output=0, feature=0
uhid3 at uhidev4 reportid 4: input=1, output=0, feature=0
uhid4 at uhidev4 reportid 8: input=1, output=0, feature=0
uhidev5 at uhub5 port 3 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev5: iclass 3/0, 33 report ids
uhid5 at uhidev5 reportid 16: input=6, output=6, feature=0
uhid6 at uhidev5 reportid 17: input=19, output=19, feature=0
uhid7 at uhidev5 reportid 32: input=14, output=14, feature=0
uhid8 at uhidev5 reportid 33: input=31, output=31, feature=0
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ukbd1 detached
uhidev3 detached
wsmouse1 detached
ums1 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev4 detached
uhid5 detached
uhid6 detached
uhid7 detached
uhid8 detached
uhidev5 detached
uhidev3 at uhub5 port 3 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev4 at uhub5 port 3 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev4: iclass 3/1, 8 report ids
ums1 at uhidev4 reportid 2: 16 buttons, Z and W dir
wsmouse1 at ums1 mux 0
uhid2 at uhidev4 reportid 3: input=4, output=0, feature=0
uhid3 at uhidev4 reportid 4: input=1, output=0, feature=0
uhid4 at uhidev4 reportid 8: input=1, output=0, feature=0
uhidev5 at uhub5 port 3 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev5: iclass 3/0, 33 report ids
uhid5 at uhidev5 reportid 16: input=6, output=6, feature=0
uhid6 at uhidev5 reportid 17: input=19, output=19, feature=0
uhid7 at uhidev5 reportid 32: input=14, output=14, feature=0
uhid8 at uhidev5 reportid 33: input=31, output=31, feature=0
uhidev6 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev6: iclass 3/1, 1 report id
ums2 at uhidev6 reportid 1: 3 buttons, Z dir
wsmouse2 at ums2 mux 0
wsmouse2 detached
ums2 detached
uhidev6 detached
uhidev6 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev6: iclass 3/1, 1 report id
ums2 at uhidev6 reportid 1: 3 buttons, Z dir
wsmouse2 at ums2 mux 0
wsmouse2 detached
ums2 detached
uhidev6 detached
uhidev6 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev6: iclass 3/1, 1 report id
ums2 at uhidev6 reportid 1: 3 buttons, Z dir
wsmouse2 at ums2 mux 0
wsmouse2 detached
ums2 detached
uhidev6 detached
uhidev6 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev6: iclass 3/1, 1 report id
ums2 at uhidev6 reportid 1: 3 buttons, Z dir
wsmouse2 at ums2 mux 0
wsmouse2 detached
ums2 detached
uhidev6 detached
uhidev6 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev6: iclass 3/1, 1 report id
ums2 at uhidev6 reportid 1: 3 buttons, Z dir
wsmouse2 at ums2 mux 0
wsmouse2 detached
ums2 detached
uhidev6 detached
uhidev6 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev6: iclass 3/1, 1 report id
ums2 at uhidev6 reportid 1: 3 buttons, Z dir
wsmouse2 at ums2 mux 0
wsmouse2 detached
ums2 detached
uhidev6 detached
uhub0: device problem, disabling port 4
uhidev6 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev6: iclass 3/1, 1 report id
ums2 at uhidev6 reportid 1: 3 buttons, Z dir
wsmouse2 at ums2 mux 0
wsmouse2 detached
ums2 detached
uhidev6 detached
uhub0: port 4, set config 0 at addr 3 failed
uhub0: device problem, disabling port 4
uhidev6 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev6: iclass 3/1, 1 report id
ums2 at uhidev6 reportid 1: 3 buttons, Z dir
wsmouse2 at ums2 mux 0
wsmouse2 detached
ums2 detached
uhidev6 detached
uhidev6 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev6: iclass 3/1, 1 report id
ums2 at uhidev6 reportid 1: 3 buttons, Z dir
wsmouse2 at ums2 mux 0
wsmouse2 detached
ums2 detached
uhidev6 detached
uhidev6 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev6: iclass 3/1, 1 report id
ums2 at uhidev6 reportid 1: 3 buttons, Z dir
wsmouse2 at ums2 mux 0
wsmouse2 detached
ums2 detached
uhidev6 detached
usbd_free_xfer: xfer=0xfffffd843e83aa50 not free
usbd_free_xfer: xfer=0xfffffd843e83a780 not free
syncing disks... done
r
OpenBSD 6.5 (GENERIC.MP) #7: Wed Nov 20 23:21:48 MST 2019
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16033533952 (15290MB)
avail mem = 15537963008 (14818MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebf90 (49 entries)
bios0: vendor American Megatrends Inc. version "204" date 11/20/2014
bios0: ASUSTeK COMPUTER INC. X550ZA
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT ECDT MCFG MSDM HPET UEFI SSDT SSDT CRAT SSDT SSDT SSDT SSDT
acpi0: wakeup devices LOM_(S4) SBAZ(S4) ECIR(S4) OHC1(S4) EHC1(S4) OHC2(S4) EHC2(S4) OHC3(S4) EHC3(S4) OHC4(S4) XHC0(S4) XHC1(S4) ODD8(S3) GLAN(S4) LID_(S5) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 16 (boot processor)
cpu0: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2496.41 MHz, 15-30-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu0: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 17 (application processor)
cpu1: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu1: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu1: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu1: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 18 (application processor)
cpu2: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu2: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu2: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu2: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 19 (application processor)
cpu3: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu3: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu3: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu3: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins
ioapic1 at mainbus0: apid 1 pa 0xfec01000, version 21, 32 pins
acpiec0 at acpi0
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB21)
acpiprt2 at acpi0: bus -1 (PB22)
acpiprt3 at acpi0: bus -1 (PB31)
acpiprt4 at acpi0: bus -1 (PB32)
acpiprt5 at acpi0: bus -1 (PB33)
acpiprt6 at acpi0: bus -1 (PB34)
acpiprt7 at acpi0: bus 2 (PE20)
acpiprt8 at acpi0: bus -1 (PE21)
acpiprt9 at acpi0: bus 3 (PE22)
acpiprt10 at acpi0: bus -1 (PE23)
acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpitz0 at acpi0: critical temperature is 103 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"AMDC003" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "X550E30" serial    type LIon oem "OEM"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID_
"ATK4001" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn2 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
cpu0: 2496 MHz: speeds: 2500 2300 2100 1700 1400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 15h Root Complex" rev 0x00
radeondrm0 at pci0 dev 1 function 0 "ATI Kaveri Radeon R6" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 1 function 1 "ATI Kaveri HD Audio" rev 0x00: msi
azalia0: no supported codecs
pchb1 at pci0 dev 2 function 0 "AMD AMD64 15h PCIE" rev 0x00
pchb2 at pci0 dev 3 function 0 "AMD AMD64 15h PCIE" rev 0x00
pchb3 at pci0 dev 4 function 0 "AMD AMD64 15h PCIE" rev 0x00
xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x09: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 addr 1
ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 2: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MQ01ABD1, AX0R> SCSI3 0/direct fixed naa.5000039614b041b8
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 2 lun 0: <MATSHITA, DVD-RAM UJ8G6, 1.00> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x16: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
azalia1 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x01: msi
azalia1: codecs: Realtek ALC269
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
ppb0 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40
pci1 at ppb0 bus 1
sdhc0 at pci0 dev 20 function 7 "AMD Hudson-2 SD Host Controller" rev 0x00: apic 0 int 16
sdhc0: SDHC 2.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ppb1 at pci0 dev 21 function 0 "AMD Hudson-2 PCIE" rev 0x00
pci2 at ppb1 bus 2
ppb2 at pci0 dev 21 function 2 "AMD Hudson-2 PCIE" rev 0x00
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00), msi, address 1c:b7:2c:22:fb:c9
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
pchb4 at pci0 dev 24 function 0 "AMD AMD64 15h Link Cfg" rev 0x00
pchb5 at pci0 dev 24 function 1 "AMD AMD64 15h Address Map" rev 0x00
pchb6 at pci0 dev 24 function 2 "AMD AMD64 15h DRAM Cfg" rev 0x00
pchb7 at pci0 dev 24 function 3 "AMD AMD64 15h Misc Cfg" rev 0x00
pchb8 at pci0 dev 24 function 4 "AMD AMD64 15h CPU Power" rev 0x00
pchb9 at pci0 dev 24 function 5 "AMD AMD64 15h Misc Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: SVM/RVI
efifb at mainbus0 not configured
uhidev0 at uhub0 port 3 configuration 1 interface 0 "KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle" rev 1.10/1.22 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 3 configuration 1 interface 1 "KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle" rev 1.10/1.22 addr 2
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0
uhidev2 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev2: iclass 3/1, 1 report id
ums0 at uhidev2 reportid 1: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uhub5 at uhub1 port 1 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" rev 2.00/92.24 addr 2
uhub5: device problem, disabling port 1
uhidev3 at uhub5 port 3 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev3: iclass 3/1
ukbd1 at uhidev3: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
uhidev4 at uhub5 port 3 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev4: iclass 3/1, 8 report ids
ums1 at uhidev4 reportid 2: 16 buttons, Z and W dir
wsmouse1 at ums1 mux 0
uhid2 at uhidev4 reportid 3: input=4, output=0, feature=0
uhid3 at uhidev4 reportid 4: input=1, output=0, feature=0
uhid4 at uhidev4 reportid 8: input=1, output=0, feature=0
uhidev5 at uhub5 port 3 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev5: iclass 3/0, 33 report ids
uhid5 at uhidev5 reportid 16: input=6, output=6, feature=0
uhid6 at uhidev5 reportid 17: input=19, output=19, feature=0
uhid7 at uhidev5 reportid 32: input=14, output=14, feature=0
uhid8 at uhidev5 reportid 33: input=31, output=31, feature=0
uvideo0 at uhub2 port 4 configuration 1 interface 0 "Chicony Electronics USB2.0 VGA UVC WebCam" rev 2.00/99.16 addr 2
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 953868MB, 512 bytes/sector, 1953523553 sectors
root on sd1a (6759d2c493c65bb1.a) swap on sd1b dump on sd1b
initializing kernel modesetting (KAVERI 0x1002:0x130D 0x1043:0x17FD).
radeondrm0: 1366x768, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
wsmouse0 detached
ums0 detached
uhidev2 detached
iridium[77335]: pledge "rpath", syscall 5
syncing disks... done
r
OpenBSD 6.5 (GENERIC.MP) #7: Wed Nov 20 23:21:48 MST 2019
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16033533952 (15290MB)
avail mem = 15537971200 (14818MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.8 @ 0xebf90 (49 entries)
bios0: vendor American Megatrends Inc. version "204" date 11/20/2014
bios0: ASUSTeK COMPUTER INC. X550ZA
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT ECDT MCFG MSDM HPET UEFI SSDT SSDT CRAT SSDT SSDT SSDT SSDT
acpi0: wakeup devices LOM_(S4) SBAZ(S4) ECIR(S4) OHC1(S4) EHC1(S4) OHC2(S4) EHC2(S4) OHC3(S4) EHC3(S4) OHC4(S4) XHC0(S4) XHC1(S4) ODD8(S3) GLAN(S4) LID_(S5) SLPB(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 16 (boot processor)
cpu0: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2496.40 MHz, 15-30-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu0: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu0: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu0: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 17 (application processor)
cpu1: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu1: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu1: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu1: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu1: smt 1, core 0, package 0
cpu2 at mainbus0: apid 18 (application processor)
cpu2: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu2: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu2: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu2: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu2: smt 0, core 1, package 0
cpu3 at mainbus0: apid 19 (application processor)
cpu3: AMD A10-7400P Radeon R6, 10 Compute Cores 4C+6G, 2495.34 MHz, 15-30-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,FMA3,CX16,SSE4.1,SSE4.2,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,XOP,SKINIT,WDT,FMA4,TCE,NODEID,TBM,CPCTR,DBKP,PERFTSC,ITSC,FSGSBASE,BMI1,XSAVEOPT
cpu3: 96KB 64b/line 3-way I-cache, 16KB 64b/line 4-way D-cache, 2MB 64b/line 16-way L2 cache
cpu3: ITLB 48 4KB entries fully associative, 24 4MB entries fully associative
cpu3: DTLB 64 4KB entries fully associative, 64 4MB entries fully associative
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 0 pa 0xfec00000, version 21, 24 pins
ioapic1 at mainbus0: apid 1 pa 0xfec01000, version 21, 32 pins
acpiec0 at acpi0
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PB21)
acpiprt2 at acpi0: bus -1 (PB22)
acpiprt3 at acpi0: bus -1 (PB31)
acpiprt4 at acpi0: bus -1 (PB32)
acpiprt5 at acpi0: bus -1 (PB33)
acpiprt6 at acpi0: bus -1 (PB34)
acpiprt7 at acpi0: bus 2 (PE20)
acpiprt8 at acpi0: bus -1 (PE21)
acpiprt9 at acpi0: bus 3 (PE22)
acpiprt10 at acpi0: bus -1 (PE23)
acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpitz0 at acpi0: critical temperature is 103 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"AMDC003" at acpi0 not configured
acpibat0 at acpi0: BAT0 model "X550E30" serial    type LIon oem "OEM"
acpiac0 at acpi0: AC unit online
acpibtn0 at acpi0: PWRB
acpibtn1 at acpi0: LID_
"ATK4001" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn2 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
cpu0: 2496 MHz: speeds: 2500 2300 2100 1700 1400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 15h Root Complex" rev 0x00
radeondrm0 at pci0 dev 1 function 0 "ATI Kaveri Radeon R6" rev 0x00
drm0 at radeondrm0
radeondrm0: msi
azalia0 at pci0 dev 1 function 1 "ATI Kaveri HD Audio" rev 0x00: msi
azalia0: no supported codecs
pchb1 at pci0 dev 2 function 0 "AMD AMD64 15h PCIE" rev 0x00
pchb2 at pci0 dev 3 function 0 "AMD AMD64 15h PCIE" rev 0x00
pchb3 at pci0 dev 4 function 0 "AMD AMD64 15h PCIE" rev 0x00
xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x09: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 addr 1
ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: msi, AHCI 1.3
ahci0: port 0: 6.0Gb/s
ahci0: port 2: 1.5Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, TOSHIBA MQ01ABD1, AX0R> SCSI3 0/direct fixed naa.5000039614b041b8
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors
cd0 at scsibus1 targ 2 lun 0: <MATSHITA, DVD-RAM UJ8G6, 1.00> ATAPI 5/cdrom removable
ohci0 at pci0 dev 18 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18, version 1.0, legacy support
ehci0 at pci0 dev 18 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
ohci1 at pci0 dev 19 function 0 "AMD Hudson-2 USB" rev 0x11: apic 0 int 18, version 1.0, legacy support
ehci1 at pci0 dev 19 function 2 "AMD Hudson-2 USB2" rev 0x11: apic 0 int 17
usb2 at ehci1: USB revision 2.0
uhub2 at usb2 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x16: polling
iic0 at piixpm0
spdmem0 at iic0 addr 0x50: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
spdmem1 at iic0 addr 0x51: 8GB DDR3 SDRAM PC3-12800 SO-DIMM
azalia1 at pci0 dev 20 function 2 "AMD Hudson-2 HD Audio" rev 0x01: msi
azalia1: codecs: Realtek ALC269
audio0 at azalia1
pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
ppb0 at pci0 dev 20 function 4 "AMD Hudson-2 PCI" rev 0x40
pci1 at ppb0 bus 1
sdhc0 at pci0 dev 20 function 7 "AMD Hudson-2 SD Host Controller" rev 0x00: apic 0 int 16
sdhc0: SDHC 2.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
ppb1 at pci0 dev 21 function 0 "AMD Hudson-2 PCIE" rev 0x00
pci2 at ppb1 bus 2
ppb2 at pci0 dev 21 function 2 "AMD Hudson-2 PCIE" rev 0x00
pci3 at ppb2 bus 3
re0 at pci3 dev 0 function 0 "Realtek 8168" rev 0x0c: RTL8168G/8111G (0x4c00), msi, address 1c:b7:2c:22:fb:c9
rgephy0 at re0 phy 7: RTL8251 PHY, rev. 0
pchb4 at pci0 dev 24 function 0 "AMD AMD64 15h Link Cfg" rev 0x00
pchb5 at pci0 dev 24 function 1 "AMD AMD64 15h Address Map" rev 0x00
pchb6 at pci0 dev 24 function 2 "AMD AMD64 15h DRAM Cfg" rev 0x00
pchb7 at pci0 dev 24 function 3 "AMD AMD64 15h Misc Cfg" rev 0x00
pchb8 at pci0 dev 24 function 4 "AMD AMD64 15h CPU Power" rev 0x00
pchb9 at pci0 dev 24 function 5 "AMD AMD64 15h Misc Cfg" rev 0x00
usb3 at ohci0: USB revision 1.0
uhub3 at usb3 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 addr 1
usb4 at ohci1: USB revision 1.0
uhub4 at usb4 configuration 1 interface 0 "AMD OHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: SVM/RVI
efifb at mainbus0 not configured
uhidev0 at uhub0 port 3 configuration 1 interface 0 "KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle" rev 1.10/1.22 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 3 configuration 1 interface 1 "KINESIS FREESTYLE KB800 KB800 Kinesis Freestyle" rev 1.10/1.22 addr 2
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=2, output=0, feature=0
uhub5 at uhub1 port 1 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" rev 2.00/92.24 addr 2
uhub5: device problem, disabling port 1
uhidev2 at uhub5 port 3 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
uhidev3 at uhub5 port 3 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev3: iclass 3/1, 8 report ids
ums0 at uhidev3 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid2 at uhidev3 reportid 3: input=4, output=0, feature=0
uhid3 at uhidev3 reportid 4: input=1, output=0, feature=0
uhid4 at uhidev3 reportid 8: input=1, output=0, feature=0
uhidev4 at uhub5 port 3 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev4: iclass 3/0, 33 report ids
uhid5 at uhidev4 reportid 16: input=6, output=6, feature=0
uhid6 at uhidev4 reportid 17: input=19, output=19, feature=0
uhid7 at uhidev4 reportid 32: input=14, output=14, feature=0
uhid8 at uhidev4 reportid 33: input=31, output=31, feature=0
uvideo0 at uhub2 port 4 configuration 1 interface 0 "Chicony Electronics USB2.0 VGA UVC WebCam" rev 2.00/99.16 addr 2
video0 at uvideo0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 953868MB, 512 bytes/sector, 1953523553 sectors
root on sd1a (6759d2c493c65bb1.a) swap on sd1b dump on sd1b
initializing kernel modesetting (KAVERI 0x1002:0x130D 0x1043:0x17FD).
radeondrm0: 1366x768, 32bpp
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wskbd1: connecting to wsdisplay0
wskbd2: connecting to wsdisplay0
wsdisplay0: screen 1-5 added (std, vt100 emulation)
uhidev5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev5: iclass 3/1, 1 report id
ums1 at uhidev5 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev5 detached
uhidev5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev5: iclass 3/1, 1 report id
ums1 at uhidev5 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev5 detached
uhidev5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev5: iclass 3/1, 1 report id
ums1 at uhidev5 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
iridium[2535]: pledge "rpath", syscall 5
iridium[32155]: pledge "rpath", syscall 5
iridium[15840]: pledge "rpath", syscall 5
wsmouse1 detached
ums1 detached
uhidev5 detached
uhidev5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev5: iclass 3/1, 1 report id
ums1 at uhidev5 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev5 detached
uhidev5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev5: iclass 3/1, 1 report id
ums1 at uhidev5 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev5 detached
uhidev5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev5: iclass 3/1, 1 report id
ums1 at uhidev5 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev5 detached
iridium[36082]: pledge "rpath", syscall 5
iridium[58077]: pledge "rpath", syscall 5
iridium[16854]: pledge "rpath", syscall 5
uhidev5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev5: iclass 3/1, 1 report id
ums1 at uhidev5 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev5 detached
uhidev5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev5: iclass 3/1, 1 report id
ums1 at uhidev5 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev5 detached
uhidev5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev5: iclass 3/1, 1 report id
ums1 at uhidev5 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev5 detached
uhub0: port 4 reset failed
uhidev5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev5: iclass 3/1, 1 report id
ums1 at uhidev5 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev5 detached
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ukbd1 detached
uhidev2 detached
wsmouse0 detached
ums0 detached
uhid2 detached
uhid3 detached
uhid4 detached
uhidev3 detached
uhid5 detached
uhid6 detached
uhid7 detached
uhid8 detached
uhidev4 detached
uhub5 detached
uhub5 at uhub1 port 1 configuration 1 interface 0 "GenesysLogic USB2.0 Hub" rev 2.00/92.24 addr 2
uhub5: device problem, disabling port 1
uhidev2 at uhub5 port 3 configuration 1 interface 0 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
uhidev3 at uhub5 port 3 configuration 1 interface 1 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev3: iclass 3/1, 8 report ids
ums0 at uhidev3 reportid 2: 16 buttons, Z and W dir
wsmouse0 at ums0 mux 0
uhid2 at uhidev3 reportid 3: input=4, output=0, feature=0
uhid3 at uhidev3 reportid 4: input=1, output=0, feature=0
uhid4 at uhidev3 reportid 8: input=1, output=0, feature=0
uhidev4 at uhub5 port 3 configuration 1 interface 2 "Logitech USB Receiver" rev 2.00/12.07 addr 3
uhidev4: iclass 3/0, 33 report ids
uhid5 at uhidev4 reportid 16: input=6, output=6, feature=0
uhid6 at uhidev4 reportid 17: input=19, output=19, feature=0
uhid7 at uhidev4 reportid 32: input=14, output=14, feature=0
uhid8 at uhidev4 reportid 33: input=31, output=31, feature=0
uhidev5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev5: iclass 3/1, 1 report id
ums1 at uhidev5 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev5 detached
uhidev5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev5: iclass 3/1, 1 report id
ums1 at uhidev5 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev5 detached
uhidev5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev5: iclass 3/1, 1 report id
ums1 at uhidev5 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev5 detached
uhidev5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev5: iclass 3/1, 1 report id
ums1 at uhidev5 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
wsmouse1 detached
ums1 detached
uhidev5 detached
uhidev5 at uhub0 port 4 configuration 1 interface 0 "vendor 0x0000 USB OPTICAL MOUSE" rev 1.10/1.00 addr 3
uhidev5: iclass 3/1, 1 report id
ums1 at uhidev5 reportid 1: 3 buttons, Z dir
wsmouse1 at ums1 mux 0


--
Luke Call
Please pray for our country(ies) and its leaders, at this important time.
More on this and other topics (a simple, non-JS site w/ no sales):
http://lukecall.net  (updated 2019-12-8)

Reply | Threaded
Open this post in threaded view
|

Re: ttyC0 floods with error messages

Jon Fineman
In reply to this post by Raymond, David
"Raymond, David" <[hidden email]> wrote:

> I get similar stuff on console 1 but not on the others on all my
> OpenBSD machines.  As I use X windows and have clean consoles 2-4
> available if necessary, I just ignore it.
>
> Dave Raymond
>
>
> On 12/16/19, [hidden email] <[hidden email]> wrote:
> > The error does not seem to be a faulty mouse and I
> > don't use a KVM switch anyway so it is not the source.
> > Following on pervious reply, I tried on a new mouse.
> > But was greeted with the same error:
> >
> > wsmouse0 detached
> > ums0 detached
> > uhidev0 detached
> > uhidev0 at uhub0 port 4 configuration 1 interface 0 "PixArt USB Optical
> > Mouse" rev 2.00/1.00 addr 2
> > uhidev0: iclass 3/1
> > ums0 at uhidev0: 3 buttons, Z dir
> > wsmouse0 at ums0 mux 0
> >
> > Unless I'm the unfortunate person destined to own all faulty
> > mice in the world, I look forward to a solution. Is there
> > anyone here who uses a desktop setup with a mouse, not greeted
> > with these pesky errors. Are experts on here sure this is not
> > a bug, or lack of proper driver. More info on the latter, this
> > test consisted of Logitech M90 and Dell MS111-P mouse.
> >
> >
>
>
> --
> David J. Raymond
> [hidden email]
> http://physics.nmt.edu/~raymond

I get this also on my Intel NUC with the mouse connected via an Anker 7 port
HUB extender. I was tidying up my cables yesterday and moved my mouse cable to
one of the NUC's ports and I haven't been spammed since.

The dmesg that was sent in looked like it had a USB HUB and then someone
mentioned a KVM switch. So not sure if the mice or host don't like how they are
connected.

Reply | Threaded
Open this post in threaded view
|

Re: ttyC0 floods with error messages

putridsoul66
In reply to this post by putridsoul66
I'm the original poster of this thread,
don't mean to whip a dead horse, but this
post is to confirm the state of this
issue.
 
The most recent -current release before
this post has fixed this issue for me.

OpenBSD 6.6-current (GENERIC.MP) #573: Sat Dec 28 19:13:57 MST 2019
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP

I'm longer greeted with  
the given train of messages from
kernel.

>wsmouse0 at ums0 mux 0
>wsmouse0 detached
>ums0 detached
>uhidev2 detached
>uhidev2 at uhub5 port 2 configuration 1 interface 0 "Logitech USB Optical
>Mouse" rev 2.00/72.00 addr 3
>uhidev2: iclass 3/1
>ums0 at uhidev2: 3 buttons, Z dir

Major props to the OpenBSD Devs for
dealing with this successfully and
in such a short time.