sparc T3 fails to boot: panic: kernel text_access_fault: pc=f040fbc4 va=f040e000

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

sparc T3 fails to boot: panic: kernel text_access_fault: pc=f040fbc4 va=f040e000

Jordan Geoghegan
Hi all,

I found a good deal for a sparc T3 on ebay and decided it would make a
good websever. My problem is, my new T3 (which was old stock, new in the
box when I got it) which booted Solaris no problem, fails to boot
OpenBSD. I have tried booting from CD, as well as from the
miniroot62.fs. I have recorded my console output below. I have tried
setting 'ok setenv security-mode none' in addition to 'ok set-default
boot-device' as per the sparc64 install man page. Any help of
suggestions would be appreciated. Has anyone else had any luck booting
OpenBSD on a T3?


{0} ok boot disk:c bsd


SPARC T3-1, No Keyboard
Copyright (c) 1998, 2010, Oracle and/or its affiliates. All rights reserved.
OpenBoot 4.32.0.b, 65024 MB memory available, Serial #96550946.
Ethernet address 0:21:28:c1:40:22, Host ID: 85c14022.



Boot device: /pci@400/pci@1/pci@0/pci@4/scsi@0/disk@p0:c  File and args: bsd
OpenBSD IEEE 1275 Bootblock 1.4
..>> OpenBSD BOOT 1.9
|/-open
/pci@400/pci@1/pci@0/pci@4/scsi@0/disk@w5001b448b4356958,0:c/etc/random.seed:
No such file or directory
\|/-\Booting
/pci@400/pci@1/pci@0/pci@4/scsi@0/disk@w5001b448b4356958,0:c/bsd
4087984@0x1000000| console is /virtual-devices@100/console@1

Copyright (c) 1982, 1986, 1989, 1991, 1993

     The Regents of the University of California.  All rights reserved.

Copyright (c) 1995-2017 OpenBSD. All rights reserved.
https://www.OpenBSD.org


OpenBSD 6.2 (RAMDISK) #282: Tue Oct  3 23:21:19 MDT 2017

[hidden email]:/usr/src/sys/arch/sparc64/compile/RAMDISK

real mem = 68182605824 (65024MB)

avail mem = 66981036032 (63878MB)

mainbus0 at root: SPARC T3-1

cpu0 at mainbus0: SPARC-T3 (rev 0.0) @ 1648.762 MHz

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

vbus0 at mainbus0

"flashprom" at vbus0 not configured

"tpm" at vbus0 not configured

cbus0 at vbus0

"virtual-channel" at cbus0 not configured

"virtual-channel-client" at cbus0 not configured

"virtual-channel-client" at cbus0 not configured

"virtual-channel" at cbus0 not configured

"virtual-domain-service" at cbus0 not configured

"n2cp" at vbus0 not configured

"ncp" at vbus0 not configured

vrng0 at vbus0

vcons0 at vbus0: ivec 0x111, console

vrtc0 at vbus0

panic: kernel text_access_fault: pc=f040fbc4 va=f040e000

halted


Program terminated
{0} ok

Reply | Threaded
Open this post in threaded view
|

Re: sparc T3 fails to boot: panic: kernel text_access_fault: pc=f040fbc4 va=f040e000

Mark Kettenis
Can your try a -current snapshot?

Reply | Threaded
Open this post in threaded view
|

Re: sparc T3 fails to boot: panic: kernel text_access_fault: pc=f040fbc4 va=f040e000

Jordan Geoghegan

On 02/06/18 02:20, Mark Kettenis wrote:
> Can your try a -current snapshot?

Yes, Theo asked me same thing and I  replied, I just accidentally forgot
to cc sparc@

Below see my findings from trying latest snapshot:


On 02/05/18 21:08, Theo de Raadt wrote:
> Can you try a snapshot please?

I just tried the latest snapshot, and I at least got to the install
prompt, but unfortunately the machine freezes at the prompt and does not
allow me to proceed. No keystrokes are registered and the only option is
to hard reset. I've included below my full console output from start to
finish. My apologies if it is too verbose.


#
Primary Bootstrap.


U-Boot 1.1.4

Custom AST2100 U-Boot 3.0 (Sep 30 2010 - 12:49:01) r59117

DRAM:  118 MB
Flash bank 0 at 10000000 has 32MB in 256 sectors (chipSize 1<<25, ratio
1, bufSz 1024).
Flash bank 1 at 12000000 has 32MB in 256 sectors (chipSize 1<<25, ratio
1, bufSz 1024).
Flash: 64 MB
Protecting U-Boot flash sectors; monitor_base=10040000.
H/W:   AST2200 SP Service Processor; SOC: AST2200 Rev. 02 ('A0')
   ARM restart caused by: power-on
   The host is OFF(S5) (hostWantsPwr=0, powerGood=0,
     allowPwrOn=1|0, outOfReset=0, fatalError=0).
   Reset straps=0x08819180, def. H-PLL=264 MHz, CPU/AHB=2:1, boot CS0#
normal speed
   PCI w/VGA noVBIOS;  NOR 38ns/byte;  DRAM clock is M-PLL: 264 MHz
(DDR2-528)
   DRAM: 128MB data - 8MB VGA, 32-bit noECC, 2 BA 10 CA, CL=4 BL=4 ap=1,
61440 us refr, DQSipv=0x2020202

FPGA Version : 1.4.2.0
Date: 2018-02-06 (Tuesday)    Time:  5:55:00
Net:   MAC1 PHY not ready faradaynic#0, faradaynic#1
Enter Diagnostics Mode
['q'uick/'n'ormal(default)/e'x'tended(manufacturing mode)] .....  5 ###  
4###  3###  2###  1###  0
Diagnostics Mode - NORMAL
<DIAGS> Memory Data Bus Test ... PASSED
<DIAGS> Memory Address Bus Test ... PASSED
I2C Probe Test - Motherboard
     Bus    Device                          Address    Result
     ===    ============================    =======    ======
      6                SP FRUID (U1101)    0xA0    PASSED
      6             DS1338(RTC) (U1102)    0xD0    PASSED

<DIAGS> PHY #0 R/W Test ... PASSED
<DIAGS> PHY #0 Link Status ... FAILED
MAC1 PHY not ready <DIAGS> ETHERNET PHY #0, Internal Loopback Test ...
#|#/# PASSED
checking for abnormal reboots: 0:0.
abnormal reboot found -- too long, ignore
Booting linux in 0 seconds...
Un-Protect Flash Bank # 1
Un-Protect Flash Bank # 2
flctrl: Recovery U-Boot (r59117) at 0x11040000 is valid (min. r39727).
Trying primary image...
Trying to boot package at 100a0000
Found kernel image at 100a2000
Found root image at 101fd524
copying 0x0003d040 bytes from 0x101fd524 to 0x00800000
bootargs= root=/dev/ram  ramdisk_size=244  console=ttyS0,9600
bigphysarea=6144
ractrends.mtdblocks=env,0x20000,0x20000,realroot,0x340000,0xb60000,params,0x2000000,0x400000,persist,0x2400000,0x1000000,coredump,0x3400000,0xc00000,
## Booting image at 100a2000 ...
    Image Name:   Linux-2.6.27.43
    Created:      2010-09-30  19:46:45 UTC
    Image Type:   ARM Linux Kernel Image (uncompressed)
    Data Size:    1422564 Bytes =  1.4 MB
    Load Address: 00008000
    Entry Point:  00008000
    Verifying Checksum ... OK
OK
do_bootm_linux() armlinux.c:104
   bootm
   0x100a2000
   0x00800000
theKernel=00008000
do_bootm_linux() armlinux.c:121 - 9
## Loading Ramdisk Image at 00800000 ...
do_bootm_linux() armlinux.c:155 - 10
    Image Name:
    Created:      2010-09-30  20:39:57 UTC
    Image Type:   ARM Linux RAMDisk Image (uncompressed)
    Data Size:    249856 Bytes = 244 kB
    Load Address: 00000000
    Entry Point:  00000000
    Verifying Checksum ... OK
do_bootm_linux() armlinux.c:182 - 11
do_bootm_linux() armlinux.c:245 - 15
arch_number = 0x00000386
env_t       = 0x01ED0008
boot_params = 0x00000100
DRAM bank   = 0x00000000
-> start    = 0x00000000
-> size     = 0x07600000
ethaddr     = 00:21:28:C1:40:2B
eth1addr    = 00:21:28:C1:40:2A
ip_addr     = 0.0.0.0
baudrate    = 9600 bps
Sun extensions:
   bi_UBootEnvAddr     = 0x10020000
   bi_UBootEnvSize     = 0x00020000
   bi_flashstart       = 0x10000000
   bi_flashsize        = 0x04000000
   bi_flashbanksize    = 0x02000000
   bi_flashbanks       = 0x02
   bi_flashbankwidth   = 0x01
   bi_flashsectorsize  = 0x00020000
   bi_flashsectorcount = 0x00000200
   bi_boottype         = 0x02
   bi_primarytype      = 0x02
   bi_secondarytype    = 0x02
   bi_booted           = 0x100a0000
   bi_primary          = 0x10040000
   bi_secondary        = 0x11040000
   bi_primaryhdr       = 0x100a0000
   bi_secondaryhdr     = 0x110a0000
   bi_imagearea0       = 0x10040000
   bi_imagearea1       = 0x11040000
   bi_maximagesize     = 0x00fc0000
   bi_min_firmware_rev = 0
   bi_sptrace_base     = 0x07600000
   bi_sptrace_len      = 0x00100000
   bi_apbclockhz       = 0x03ef1480

H/W:   AST2200 SP Service Processor; SOC: AST2200 Rev. 02 ('A0')
   The host is OFF(S5) (hostWantsPwr=0, powerGood=0,
     allowPwrOn=1|0, outOfReset=0, fatalError=0).
   ARM Control reg: RR=0 HV=0 IC=1 BPd=0 RomP=0 SysP=0 BE=0 WB=1 DC=0
AlinFlt=1 MMU=0
   Cache Type reg: CType=0xe WB, sep.; I: 16KB of 32B lines 4-way; D:
16KB of 32B lines 4-way
     IC locked ways(3:0): 0000b, DC locked ways: 0000b
   Reset straps=0x08819180, def. H-PLL=264 MHz, CPU/AHB=2:1, boot CS0#
normal speed
   H-PLL (params=0x04291) 264.000 MHz, M-PLL params=0x04120-->264.000 MHz
   CPUCLK: H-PLL/1=264 MHz, AHB HCLK: CPUCLK/2=132 MHz, APB PCLK:
H-PLL/4= 66 MHz
   PCI w/VGA noVBIOS;  NOR 38ns/byte;  DRAM clock is M-PLL: 264 MHz
(DDR2-528)
   Bus-master-mode clocks: LPC LHCLK= 33 MHz
   Stopped clocks: vidCap-1, SP-Display, HACE
   DRAM: 128MB data - 8MB VGA, 32-bit noECC, 2 BA 10 CA, CL=4 BL=4 ap=1,
61440 us refr, DQSipv=0x2020202
   Reset controls: HACE, PwmFt, PECI, displays, MDMA
   Register protect: SCU UNprot, DMC prot, AHBC prot, VIC U-prot
   Ethernet MAC-PHY interface mode=6 (RMII + RMII), no MII2DC+DIO pins
do_bootm_linux() armlinux.c:260
do_bootm_linux() armlinux.c:263
do_bootm_linux() armlinux.c:267
do_bootm_linux() armlinux.c:279
do_bootm_linux() armlinux.c:283
do_bootm_linux() armlinux.c:287
do_bootm_linux() armlinux.c:295
Galactic register 1: 400529c0
Starting watchdog timer.
ast_init_watchdog: SCU registers are already unlocked.

Starting kernel at 0x00008000...

do_bootm_linux() armlinux.c:320
do_bootm_linux() armlinux.c:324 (0x00000386,0x00000100)
Uncompressing
Linux...............................................................................................
done, booting the kernel.
Linux version 2.6.27.43 (cb75630@sanpen-rh5-3) (gcc version 3.3.6) #1
Thu Sep 30 12:46:26 PDT 2010
CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=00053177
Machine: ASPEED-AST2100
Memory policy: ECC disabled, Data cache writeback
CPU0: D VIVT write-back cache
CPU0: I cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
CPU0: D cache: 16384 bytes, associativity 4, 32 byte lines, 128 sets
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 29972
Kernel command line: root=/dev/ram  ramdisk_size=244 console=ttyS0,9600
bigphysarea=6144
ractrends.mtdblocks=env,0x20000,0x20000,realroot,0x340000,0xb60000,params,0x2000000,0x400000,persist,0x2400000,0x1000000,coredump,0x3400000,0xc00000,
PID hash table entries: 512 (order: 9, 2048 bytes)
console [ttyS0] enabled
mach/timer.c: Just lost 82 clock interrupts.
Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
Memory: 118MB = 118MB total
Memory: 91704KB available (2692K code, 245K data, 124K init)
Calibrating delay loop... 131.48 BogoMIPS (lpj=657408)
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
CPU: Testing write buffer coherency: ok
net_namespace: 804 bytes
NET: Registered protocol family 16
NET: Registered protocol family 2
IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
TCP established hash table entries: 4096 (order: 3, 32768 bytes)
TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
TCP: Hash tables configured (established 4096 bind 4096)
TCP reno registered
NET: Registered protocol family 1
checking if image is initramfs...it isn't (bad gzip magic numbers);
looks like an initrd
Freeing initrd memory: 244K
NetWinder Floating Point Emulator V0.97 (double precision)
bigphysarea: Allocated 6144 pages at 0xc083e000.
squashfs: version 3.4 (2008/08/26) Phillip Lougher
squashfs: LZMA suppport for slax.org by jro
JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
msgmni has been set to 179
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered (default)
ttyS0 at MMIO 0x1e783000 (irq = 9) is a GUC-ASPEED UART
ttyS1 at MMIO 0x1e784000 (irq = 10) is a GUC-ASPEED UART
brd: module loaded
loop: module loaded
FTGMAC100: ASPEED FTGMAC Driver, (Linux Kernel 2.6.15.7) 11/17/2008 - by
ASPEED
FTGMAC100: eth0: at 0xfe660000 IRQ:2 noWait:0, MAC 00:21:28:c1:40:2b
FTGMAC100: eth0:ftgmac100_reset, phyAddr=0x0, miiPhyId=0x0040_61e4
FTGMAC100: lp->rx_descs = ffc00000, lp->rx_rx_descs_dma = 715c000
FTGMAC100: lp->rx_buf = 00000000, lp->rx_buf_dma = 0
FTGMAC100: lp->tx_descs = ffc01000, lp->tx_rx_descs_dma = 716d000
FTGMAC100: lp->tx_buf = 00000000, lp->tx_buf_dma = 0
FTGMAC100: eth1: at 0xfe680000 IRQ:3 noWait:0, MAC 00:21:28:c1:40:2a
FTGMAC100: eth1:ftgmac100_reset, phyAddr=0xff, miiPhyId=0x0000_0002
FTGMAC100: lp->rx_descs = ffc02000, lp->rx_rx_descs_dma = 7171000
FTGMAC100: lp->rx_buf = 00000000, lp->rx_buf_dma = 0
FTGMAC100: lp->tx_descs = ffc03000, lp->tx_rx_descs_dma = 7184000
FTGMAC100: lp->tx_buf = 00000000, lp->tx_buf_dma = 0
Ractrends Flash mapping: 0x2000000 at 0x10000000
Bank #0: Found 1 x16 devices at 0x0 in 8-bit bank
  Amd/Fujitsu Extended Query Table at 0x0040
Bank #0: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
Ractrends Flash mapping: 0x2000000 at 0x12000000
Bank #1: Found 1 x16 devices at 0x0 in 8-bit bank
  Amd/Fujitsu Extended Query Table at 0x0040
Bank #1: CFI does not contain boot bank location. Assuming top.
number of CFI chips: 1
Number of banks found = 2
Concatenating MTD devices:
(0): "Bank #0"
(1): "Bank #1"
into device "G12N Flash Banks #0 and #1"
GetMTDPartitions() says string is
"env,0x20000,0x20000,realroot,0x340000,0xb60000,params,0x2000000,0x400000,persist,0x2400000,0x1000000,coredump,0x3400000,0xc00000,"
MTD Partition 0 : fullpart @ 0x0 of Size 0x4000000
MTD Partition 1 : env @ 0x20000 of Size 0x20000
MTD Partition 2 : realroot @ 0x340000 of Size 0xb60000
MTD Partition 3 : params @ 0x2000000 of Size 0x400000
MTD Partition 4 : persist @ 0x2400000 of Size 0x1000000
MTD Partition 5 : coredump @ 0x3400000 of Size 0xc00000
Creating 6 MTD partitions on "G12N Flash Banks #0 and #1":
0x00000000-0x04000000 : "fullpart"
0x00020000-0x00040000 : "env"
0x00340000-0x00ea0000 : "realroot"
0x02000000-0x02400000 : "params"
0x02400000-0x03400000 : "persist"
0x03400000-0x04000000 : "coredump"
wdt: AST2100 WDT is installed.
wdt: AST2100 WDT nowayout = 1, heartbeat = 30 secs
wdt: AST2100 WDT guardstartupshutdown = 1
wdt: AST2100 WDT startuptimeout = 600, shutdowntimeout = 60
wdt: AST2100 WDT was enabled at driver start, time remaining 53 secs.
wdt: Guarding startup, setting watchdog for 600 seconds.
nf_conntrack version 0.5.0 (2048 buckets, 8192 max)
CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Plase use
nf_conntrack.acct=1 kernel paramater, acct=1 nf_conntrack module option or
sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP cubic registered
NET: Registered protocol family 10
ip6_tables: (C) 2000-2006 Netfilter Core Team
NET: Registered protocol family 17
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
drivers/rtc/hctosys.c: unable to open rtc device (rtc0)
RAMDISK: squashfs filesystem found at block 0
RAMDISK: Loading 243KiB [1 disk] into ram disk...
|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#done.
VFS: Mounted root (squashfs filesystem) readonly.
Freeing init memory: 124K

INIT: version 2.86 booting

Creating /var tmpfs
Creating directories in /var...done.
Creating /var/log tmpfs...done.
Calculating module dependencies... done.
Loading modules...
     flashinfo
     helper
Helper Module Driver Version 1.1
mach/timer.c: Just lost 2 clock interrupts.
Copyright (c) 2006 American Megatrends Inc.
     dbgpersist
Persistent Driver Debugger version 1.1
Copyright (c) 2008 Sun Microsystems Inc.
     Loading debug: usbhub [success]
     1 debug modules loaded
     gpiomgr
GPIOMGR Driver: Skipping initialization of GPIO named SP_SER_BYPASS, set
to pin number -1.
     gpioint
     fpga
fpga: module license 'Proprietary' taints kernel.
FPGA init OK: base 50000000, size 8000000 (major 120)
     fpgaflash
     i2c-core
     i2c-dev
i2c /dev entries driver
     i2c-algo-as
     i2c-aspeed
i2c-adapter i2c-0: Hardware routines registered
Registered bus id: i2c-0
i2c-adapter i2c-1: Hardware routines registered
Registered bus id: i2c-1
i2c-adapter i2c-2: Hardware routines registered
Registered bus id: i2c-2
i2c-adapter i2c-3: Hardware routines registered
Registered bus id: i2c-3
i2c-adapter i2c-4: Hardware routines registered
Registered bus id: i2c-4
i2c-adapter i2c-5: Hardware routines registered
Registered bus id: i2c-5
i2c-adapter i2c-6: Hardware routines registered
Registered bus id: i2c-6
     i2c-boardinfo
     videocap
AST Video Capture Driver Version 1.0
Copyright (c) 2005-2006 American Megatrends Inc.
     usb
Initializing USB Devices -
USB Device Endpoint Driver
Copyright 2006 American Megatrends Inc.
usb_init(): --USB INITIALIZING-- version MOD-VER:2010-09-30,12:39:56
with UsbEth and EndPoint-Remapping: 1
USB GlobalDisconnect(): Called
(E)ethBot_ConvertMacStr: converting '002128574716'
Init AST11 Success
USB GlobalReconnect(): Called
mach/timer.c: Just lost 2 clock interrupts.
USB Driver is Successfully Initialized
     sptrace
sptrace initialized.
All modules loaded.
Setting kernel variables ...
kernel.core_pattern = /coredump/%h.%e.core
kernel.core_uses_pid = 1
net.ipv4.ip_local_port_range = 3100 7075
... done.
Checking device file systems
Finished check of device file systems

Checking configuration files state ...
Image date:  Thu Sep 30 13:39:20 PDT 2010    Image revision: 59117
Conf date:   Thu Sep 30 13:39:20 PDT 2010    Conf revision:  59117
Configuration files state good after upgrade.
Mounting local filesystems...
Mounted all disk partitions.

Starting Platform Initialization: platinit.
Created links for vbsc
Running ldconfig...done
Hostname: SUNSP-1130BDR24A.


Setting the System Clock using the Hardware Clock as reference...
System Clock set. Local time: Tue Feb  6 05:56:13 GMT 2018

Initializing SP Trace Buffers
Setting up networking...done.
Setting up IP spoofing protection: rp_filter.
Configuring IPv6...done
Configuring network interfaces...done.
Running ldconfig...done
Starting portmap daemon: portmap.
Initializing random number generator...done.
Starting ILOM Watchdog daemon.
wdt: WDT device opened.  Watchdog starting with heartbeat = 30 secs
mach/timer.c: Just lost 7 clock interrupts.
wdt: AST2100 WDT was enabled at driver open, time remaining 543 secs.
  Done
populating memstore vars from disk
Running plat...System has been identified as: 2U, 8 disks, rev 5, pm 0
Probing FRUs
/SYS/MB
/SYS/MB_ENV
/SYS/MB/SP
/SYS/MB/SCC_CARD
/SYS/MB/CMP0/BOB0/CH0/D0
/SYS/MB/CMP0/BOB0/CH1/D0
/SYS/MB/CMP0/BOB1/CH0/D0
/SYS/MB/CMP0/BOB1/CH1/D0
/SYS/MB/CMP0/BOB2/CH0/D0
/SYS/MB/CMP0/BOB2/CH1/D0
/SYS/MB/CMP0/BOB3/CH0/D0
/SYS/MB/CMP0/BOB3/CH1/D0
/SYS/PS0
/SYS/PS1
/SYS/SASBP
/SYS/PDB
/SYS/CONNBD
/SYS/FANBD
/SYS/MB/RISER0
/SYS/MB/RISER1
/SYS/MB/RISER2
probe time 5 sec
Done Probing FRUs
Done running plat
Identifying Product Data...done.
Setting poweron delay...

INIT: Entering runlevel: 3

Preparsing sensor.xml...
Starting system log daemon: syslogd and klogd.
Starting capidirect daemon: capidirectd . Done
Starting Event Manager: eventmgr  . Done
Starting ipmi log manager daemon: logmgr . Done
Starting Boot Timer.
Starting user mgmt upgrade program: usrmgt_upgrade.
Starting the Health Monitor Daemon...
Starting portmap daemon: portmap.
Starting Host console Daemon: consd . Done
Starting capidirectd: Done.
Starting Error Telemetry Collection Daemon: etcd . Done
Starting Fault Diagnosis Daemon: fdd . Done
Starting Network Interface Plugging Daemon: eth0.
Starting IPMI Stack: . Done
SSH RSA Host Key Files already exist. Skipping key creation ...
SSH DSA Host Key Files already exist. Skipping key creation ...
Starting sshd.
Starting BBR daemon...
bbrd started after 1 seconds.
Starting SP fishwrap cache daemon: fishwrapd . Done
Starting Host deamon: hostd . Done
Starting Network Controller Sideband Interface Daemon: ncsid . Done
Starting Platform Obfuscation Daemon: pod . Done
Starting vbsc daemon: vbsc . Done
Starting lu main daemon: lumain . Done
Starting Serial Server: seriald . Done
Starting HT sign on daemon: htsignond . Done
Starting webgo Web Server: webgo . Done
Starting Detection/Diagnosis After System Boot: dasboot  Done
Starting Servicetags discoverer: stdiscoverer.
Starting Servicetags listener: stlistener.
Starting Dynamic FRUID Daemon: dynafrud  Done



SUNSP-1130BDR24A login: root
Password:

Oracle(R) Integrated Lights Out Manager

Version 3.0.12.1.d r59117

Copyright (c) 2010, Oracle and/or its affiliates. All rights reserved.

Warning: password is set to factory default.

-> start /SYS

Are you sure you want to start /SYS (y/n)? ye# #

Starting /SYS


-> start /SP/console

Are you sure you want to start /SP/console (y/n)? y


Serial console started.  To stop, type #.
[CPU 0:0:0] NOTICE:  Starting MBISI
[CPU 0:0:0] NOTICE:  Issuing Host warm Reset
[CPU 0:0:0] NOTICE:  Copying code to Cache
[CPU 0:0:0] NOTICE:  Initializing MCU 0
[CPU 0:0:0] NOTICE:  Initializing MCU 1
[CPU 0:0:0] NOTICE:  SMI Channel 0, SB Mapping 0 -- ERRCNT: 0x0    
LNERR:    0x0
[CPU 0:0:0] NOTICE:  SMI Channel 0, SB Mapping 1 -- ERRCNT: 0x0    
LNERR:    0x0
[CPU 0:0:0] NOTICE:  SMI Channel 1, SB Mapping 0 -- ERRCNT: 0x0    
LNERR:    0x0
[CPU 0:0:0] NOTICE:  SMI Channel 1, SB Mapping 1 -- ERRCNT: 0x0    
LNERR:    0x0
[CPU 0:0:0] NOTICE:  SMI Channel 0, SB Mapping 0 -- ERRCNT: 0x0    
LNERR:    0x0
[CPU 0:0:0] NOTICE:  SMI Channel 0, SB Mapping 1 -- ERRCNT: 0x0    
LNERR:    0x0
[CPU 0:0:0] NOTICE:  SMI Channel 1, SB Mapping 0 -- ERRCNT: 0x0    
LNERR:    0x0
[CPU 0:0:0] NOTICE:  SMI Channel 1, SB Mapping 1 -- ERRCNT: 0x0    
LNERR:    0x0
0:0:0>
0:0:0>SPARC T3-1 POST 4.32.0.a 2010/09/24 20:30
/ws/obp-builds/releases/4.32/4.32.0.a/post-4.32.0-micro/Niagara/serpa/integrated
(cb75630)
0:0:0>Copyright (c) 2010, Oracle and/or its affiliates. All rights
reserved.
0:0:0>POST enabling CMP 0 threads: ffffffff.ffffffff.ffffffff.ffffffff
0:0:0>Diag mode      : 1 [Normal]
0:0:0>Diag level     : 1 [Max]
0:0:0>Diag verbosity : 2 [Normal]
0:0:0>Test Memory.....#|#/#-#\#Done
0:0:0>Setup POST Mailbox .....#|#/#-#\#|#/#-#\#|#/#Done
0:0:0>Master CPU Tests
Basic.....#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#Done
0:0:0>Init MMU.....
0:0:0>Setup POST Mailbox .....#/#-#\#|#/#-#\#|#/#-#\#Done
0:0:0>L2
Tests.....#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#Done
0:0:0>Extended CPU
Tests.....#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#Done
0:0:0>Scrub Memory.....#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#Done
0:0:0>Functional CPU Tests.....#\#|#Done
0:0:0>Extended Memory
Tests.....#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#Done
0:0:0>SPU CWQ Tests... #|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#Done
0:0:0>MAU Tests...
#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#Done
0:0:0>IOS register
tests.....#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#Done
0:0:0>Network Interface Unit Port 0 Tests
...#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#Done
0:0:0>Network Interface Unit Port 1 Tests
...#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#Done
2018-02-06 05:51:51.782 0:0:0>INFO:
2018-02-06 05:51:51.790 0:0:0>    POST Passed all devices.
2018-02-06 05:51:51.803 0:0:0>POST:    Return to Host Config.
[CPU 0:0:0] NOTICE:  Reconfiguring System
[CPU 0:0:0] NOTICE:  MCU0: Memory Capacity is 32GB
[CPU 0:0:0] NOTICE:  MCU1: Memory Capacity is 32GB
[CPU 0:0:0] NOTICE:  Usable strands: ffffffffffffffff.ffffffffffffffff
[CPU 0:0:0] NOTICE:  System memory capacity is 64.0 GB
[CPU 0:0:0] NOTICE:  Starting MBISI
[CPU 0:0:0] NOTICE:  Issuing Host warm Reset
[CPU 0:0:0] NOTICE:  Copying code to Cache
[CPU 0:0:0] NOTICE:  Initializing MCU 0
[CPU 0:0:0] NOTICE:  Initializing MCU 1
[CPU 0:0:0] NOTICE:  SMI Channel 0, SB Mapping 0 -- ERRCNT: 0x0    
LNERR:    0x0
[CPU 0:0:0] NOTICE:  SMI Channel 0, SB Mapping 1 -- ERRCNT: 0x0    
LNERR:    0x0
[CPU 0:0:0] NOTICE:  SMI Channel 1, SB Mapping 0 -- ERRCNT: 0x0    
LNERR:    0x0
[CPU 0:0:0] NOTICE:  SMI Channel 1, SB Mapping 1 -- ERRCNT: 0x0    
LNERR:    0x0
[CPU 0:0:0] NOTICE:  SMI Channel 0, SB Mapping 0 -- ERRCNT: 0x0    
LNERR:    0x0
[CPU 0:0:0] NOTICE:  SMI Channel 0, SB Mapping 1 -- ERRCNT: 0x0    
LNERR:    0x0
[CPU 0:0:0] NOTICE:  SMI Channel 1, SB Mapping 0 -- ERRCNT: 0x0    
LNERR:    0x0
[CPU 0:0:0] NOTICE:  SMI Channel 1, SB Mapping 1 -- ERRCNT: 0x0    
LNERR:    0x0
[CPU 0:0:0] NOTICE:  Copying code to Memory
[CPU 0:0:0] NOTICE:  Running from Memory
[CPU 0:0:0] NOTICE:  Active strands: ffffffffffffffff.ffffffffffffffff
[CPU 0:0:0] NOTICE:  Configuring MDs
[CPU 0:0:0] NOTICE:  Loading PRI template
[CPU 0:0:0] NOTICE:  Configuring PRI
[CPU 0:0:0] NOTICE:  Product serial number: 1130BDR24A
[CPU 0:0:0] NOTICE:  Storing PRI to memory
[CPU 0:0:0] NOTICE:  Booting config = factory-default
[CPU 0:0:0] NOTICE:  Configuring Guest MD
[CPU 0:0:0] NOTICE:  Storing Guest MD to Memory
[CPU 0:0:0] NOTICE:  Configuring HV MD
[CPU 0:0:0] NOTICE:  Storing HV MD to Memory
[CPU 0:0:0] NOTICE:  Storing PRI to data flash ("factory-default")
[CPU 0:0:0] NOTICE:  Storing Guest MD to data flash ("factory-default")
[CPU 0:0:0] NOTICE:  Storing HV MD to data flash ("factory-default")
[CPU 0:0:0] NOTICE:  Storing mini MD to data flash ("factory-default")
[CPU 0:0:0] NOTICE:  Updating Config Information for Guest Manager
[CPU 0:0:0] NOTICE:  Jumping to hypervisor


SPARC T3-1, No Keyboard
Copyright (c) 1998, 2010, Oracle and/or its affiliates. All rights
reserved.
OpenBoot 4.32.0.b, 65024 MB memory available, Serial #96550946.
Ethernet address 0:21:28:c1:40:22, Host ID: 85c14022.



Boot device: disk  File and args:
OpenBSD IEEE 1275 Bootblock 1.4
..>> OpenBSD BOOT 1.9
Trying bsd...
|#/#-#open
/pci@400/pci@1/pci@0/pci@4/scsi@0/disk@w5001b448b4356958,0:a/etc/random.seed:
No such file or directory
\#|#/#-#\#Booting
/pci@400/pci@1/pci@0/pci@4/scsi@0/disk@w5001b448b4356958,0:a/bsd
4081224@0x1000000|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#+6584@0x13e4648|#+3255608@0x1c00000/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#+938696@0x1f1ad38|#

/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#symbols
@ 0xfe6a6340
139|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#|#/#-#\#
start=0x1000000
console is /virtual-devices@100/console@1

Copyright (c) 1982, 1986, 1989, 1991, 1993

     The Regents of the University of California.  All rights reserved.

Copyright (c) 1995-2018 OpenBSD. All rights reserved.
https://www.OpenBSD.org


OpenBSD 6.2-current (RAMDISK) #425: Mon Feb  5 05:16:38 MST 2018

[hidden email]:/usr/src/sys/arch/sparc64/compile/RAMDISK

real mem = 68182605824 (65024MB)

avail mem = 66980593664 (63877MB)

mainbus0 at root: SPARC T3-1

cpu0 at mainbus0: SPARC-T3 (rev 0.0) @ 1648.762 MHz

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

"SPARC-T3" at mainbus0 not configured

vbus0 at mainbus0

"flashprom" at vbus0 not configured

"tpm" at vbus0 not configured

cbus0 at vbus0

"virtual-channel" at cbus0 not configured

"virtual-channel-client" at cbus0 not configured

"virtual-channel-client" at cbus0 not configured

"virtual-channel" at cbus0 not configured

"virtual-domain-service" at cbus0 not configured

"n2cp" at vbus0 not configured

"ncp" at vbus0 not configured

vrng0 at vbus0

vcons0 at vbus0: ivec 0x111, console

vrtc0 at vbus0

vpci0 at mainbus0: bus 0 to 18, dvma map 80000000-ffffffff

pci0 at vpci0

ppb0 at pci0 dev 1 function 0 "Sun SPARC-T3/T4 PCIE" rev 0x01

pci1 at ppb0 bus 1

ppb1 at pci1 dev 0 function 0 "IDT 89HPES48H12G2" rev 0x02

pci2 at ppb1 bus 2

ppb2 at pci2 dev 0 function 0 "IDT 89HPES48H12G2" rev 0x02: msi

pci3 at ppb2 bus 3

ppb3 at pci2 dev 4 function 0 "IDT 89HPES48H12G2" rev 0x02

pci4 at ppb3 bus 4

mpii0 at pci4 dev 0 function 0 "Symbios Logic SAS2008" rev 0x03: msi

mpii0: RF On-Board, firmware 5.0.17.0 IR, MPI 2.0

scsibus0 at mpii0: 834 targets

ppb4 at pci2 dev 6 function 0 "IDT 89HPES48H12G2" rev 0x02: msi

pci5 at ppb4 bus 5

nep0 at pci5 dev 0 function 0 "Sun Neptune" rev 0x01: msi, address
00:21:28:c4:b8:1a

brgphy0 at nep0 phy 13: BCM5464 10/100/1000baseT PHY, rev. 1

nep1 at pci5 dev 0 function 1 "Sun Neptune" rev 0x01: msi, address
00:21:28:c4:b8:1b

brgphy1 at nep1 phy 12: BCM5464 10/100/1000baseT PHY, rev. 1

nep2 at pci5 dev 0 function 2 "Sun Neptune" rev 0x01: msi, address
00:21:28:c4:b8:1c

brgphy2 at nep2 phy 11: BCM5464 10/100/1000baseT PHY, rev. 1

nep3 at pci5 dev 0 function 3 "Sun Neptune" rev 0x01: msi, address
00:21:28:c4:b8:1d

brgphy3 at nep3 phy 10: BCM5464 10/100/1000baseT PHY, rev. 1

ppb5 at pci2 dev 8 function 0 "IDT 89HPES48H12G2" rev 0x02: msi

pci6 at ppb5 bus 6

qle0 at pci6 dev 0 function 0 "QLogic ISP2532" rev 0x02: msi

qle0: no firmware loaded

can't disestablish PCI interrupts yet

qle1 at pci6 dev 0 function 1 "QLogic ISP2532" rev 0x02: msi

qle1: no firmware loaded

can't disestablish PCI interrupts yet

ppb6 at pci0 dev 2 function 0 "Sun SPARC-T3/T4 PCIE" rev 0x01

pci7 at ppb6 bus 7

ppb7 at pci7 dev 0 function 0 "IDT 89HPES64H16G2" rev 0x02

pci8 at ppb7 bus 8

ppb8 at pci8 dev 0 function 0 "IDT 89HPES64H16G2" rev 0x02

pci9 at ppb8 bus 9

ppb9 at pci9 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x02

pci10 at ppb9 bus 10

"ASPEED Technology AST2000" rev 0x10 at pci10 dev 0 function 0 not
configured

ppb10 at pci8 dev 4 function 0 "IDT 89HPES64H16G2" rev 0x02

pci11 at ppb10 bus 11

mpii1 at pci11 dev 0 function 0 "Symbios Logic SAS2008" rev 0x03: msi

mpii1: RF On-Board, firmware 5.0.17.0 IR, MPI 2.0

scsibus1 at mpii1: 834 targets

ppb11 at pci8 dev 6 function 0 "IDT 89HPES64H16G2" rev 0x02

pci12 at ppb11 bus 12

em0 at pci12 dev 0 function 0 "Intel 82576" rev 0x01: msi, address
00:21:28:c1:40:22

em1 at pci12 dev 0 function 1 "Intel 82576" rev 0x01: msi, address
00:21:28:c1:40:23

ppb12 at pci8 dev 7 function 0 "IDT 89HPES64H16G2" rev 0x02

pci13 at ppb12 bus 13

em2 at pci13 dev 0 function 0 "Intel 82576" rev 0x01: msi, address
00:21:28:c1:40:24

em3 at pci13 dev 0 function 1 "Intel 82576" rev 0x01: msi, address
00:21:28:c1:40:25

ppb13 at pci8 dev 8 function 0 "IDT 89HPES64H16G2" rev 0x02: msi

pci14 at ppb13 bus 14

qle2 at pci14 dev 0 function 0 "QLogic ISP2532" rev 0x02: msi

qle2: no firmware loaded

can't disestablish PCI interrupts yet

qle3 at pci14 dev 0 function 1 "QLogic ISP2532" rev 0x02: msi

qle3: no firmware loaded

can't disestablish PCI interrupts yet

ppb14 at pci8 dev 10 function 0 "IDT 89HPES64H16G2" rev 0x02: msi

pci15 at ppb14 bus 15

ppb15 at pci8 dev 12 function 0 "IDT 89HPES64H16G2" rev 0x02: msi

pci16 at ppb15 bus 16

nep4 at pci16 dev 0 function 0 "Sun Neptune" rev 0x01: msi, address
00:21:28:c3:2f:fa

brgphy4 at nep4 phy 13: BCM5464 10/100/1000baseT PHY, rev. 1

nep5 at pci16 dev 0 function 1 "Sun Neptune" rev 0x01: msi, address
00:21:28:c3:2f:fb

brgphy5 at nep5 phy 12: BCM5464 10/100/1000baseT PHY, rev. 1

nep6 at pci16 dev 0 function 2 "Sun Neptune" rev 0x01: msi, address
00:21:28:c3:2f:fc

brgphy6 at nep6 phy 11: BCM5464 10/100/1000baseT PHY, rev. 1

nep7 at pci16 dev 0 function 3 "Sun Neptune" rev 0x01: msi, address
00:21:28:c3:2f:fd

brgphy7 at nep7 phy 10: BCM5464 10/100/1000baseT PHY, rev. 1

ppb16 at pci8 dev 15 function 0 "IDT 89HPES64H16G2" rev 0x02

pci17 at ppb16 bus 17

ppb17 at pci17 dev 0 function 0 "PLX PEX 8112" rev 0xaa

pci18 at ppb17 bus 18

ohci0 at pci18 dev 0 function 0 "NEC USB" rev 0x43: ivec 0x402, version 1.0

ohci1 at pci18 dev 0 function 1 "NEC USB" rev 0x43: ivec 0x403, version 1.0

ehci0 at pci18 dev 0 function 2 "NEC USB" rev 0x04: ivec 0x404

usb0 at ehci0: USB revision 2.0

uhub0 at usb0 configuration 1 interface 0 "NEC EHCI root hub" rev
2.00/1.00 addr 1

usb1 at ohci0: USB revision 1.0

uhub1 at usb1 configuration 1 interface 0 "NEC OHCI root hub" rev
1.00/1.00 addr 1

usb2 at ohci1: USB revision 1.0

uhub2 at usb2 configuration 1 interface 0 "NEC OHCI root hub" rev
1.00/1.00 addr 1

"niu" at mainbus0 not configured

"pci-performance-counters" at mainbus0 not configured

sd0 at scsibus0 targ 2 lun 0: <ATA, SanDisk SDSSDA24, 30RL> SCSI3
0/direct fixed naa.5001b448b4356958

sd0: 228936MB, 512 bytes/sector, 468862128 sectors

cd0 at scsibus1 targ 8 lun 0: <TEAC, DV-W28SS-R, 1.0C> ATAPI 5/cdrom
removable

uhub3 at uhub0 port 2 configuration 1 interface 0 "vendor 0x04b4 product
0x6560" rev 2.00/0.0b addr 2

"American Megatrends Inc. Generic Hub" rev 2.00/1.00 addr 3 at uhub3
port 3 not configured

uhidev0 at uhub3 port 4 configuration 1 interface 0 "American Megatrends
Inc. Virtual Keyboard and Mouse" rev 1.10/1.00 addr 4

uhidev0: iclass 3/1

ukbd0 at uhidev0

wskbd0 at ukbd0

uhidev1 at uhub3 port 4 configuration 1 interface 1 "American Megatrends
Inc. Virtual Keyboard and Mouse" rev 1.10/1.00 addr 4

uhidev1: iclass 3/1

uhid at uhidev1 not configured

uhub4 at uhub0 port 4 configuration 1 interface 0 "vendor 0x04b4 product
0x6560" rev 2.00/0.0b addr 5

softraid0 at root

scsibus2 at softraid0: 256 targets

bootpath:
/pci@400,0/pci@1,0/pci@0,0/pci@4,0/scsi@0,0/disk@5001b448b4356958,0

root on rd0a swap on rd0b dump on rd0b

erase ^?, werase ^W, kill ^U, intr ^C, status ^T

Welcome to the OpenBSD/sparc64 6.2 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?