Quantcast

sitaracm and ompinmux at Beagle Bone Black

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

sitaracm and ompinmux at Beagle Bone Black

Jan Stary
This is current on a Beagle Bone Black (dmesg below).
Looking at the diff to the previous dmesg (also below),
sitaracm(4) is no longer recognized - is that intended?
On the other hand, ompinmux(4) is recognized now.

The base system seems to be running just fine with
/etc/malloc.conf -> CFGRSU

        Thank you!

                Jan


OpenBSD 6.0-current (GENERIC) #0: Tue Nov  1 13:16:48 CET 2016
    [hidden email]:/sys/arch/armv7/compile/GENERIC
real mem  = 536870912 (512MB)
avail mem = 517873664 (493MB)
mainbus0 at root: TI AM335x BeagleBone Black
cpu0 at mainbus0: ARM Cortex A8 R3 rev 2 (ARMv7 core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB(64b/l,4way) I-cache, 32KB(64b/l,4way) wr-back D-cache
omap0 at mainbus0
prcm0 at omap0 rev 0.2
omap0: device edma unit 0 not configured
dmtimer0 at omap0 rev 3.1
dmtimer1 at omap0 rev 3.1
simplebus0 at mainbus0: "ocp"
simplebus1 at simplebus0: "l4_wkup"
simplebus2 at simplebus1: "scm"
ompinmux0 at simplebus2
intc0 at simplebus0 rev 5.0
omgpio0 at simplebus0: rev 0.1
gpio0 at omgpio0: 32 pins
omgpio1 at simplebus0: rev 0.1
gpio1 at omgpio1: 32 pins
omgpio2 at simplebus0: rev 0.1
gpio2 at omgpio2: 32 pins
omgpio3 at simplebus0: rev 0.1
gpio3 at omgpio3: 32 pins
com0 at simplebus0: ti16750, 64 byte fifo
com0: console
tiiic0 at simplebus0 rev 0.11
iic0 at tiiic0
"ti,tps65217" at iic0 addr 0x24 not configured
"at,24c256" at iic0 addr 0x50 not configured
"nxp,tda998x" at iic0 addr 0x70 not configured
tiiic1 at simplebus0 rev 0.11
iic1 at tiiic1
"at,24c256" at iic1 addr 0x54 not configured
"at,24c256" at iic1 addr 0x55 not configured
"at,24c256" at iic1 addr 0x56 not configured
"at,24c256" at iic1 addr 0x57 not configured
ommmc0 at simplebus0
sdmmc0 at ommmc0: 4-bit, sd high-speed, mmc high-speed
ommmc1 at simplebus0
sdmmc1 at ommmc1: 1-bit
omdog0 at simplebus0 rev 0.1
cpsw0 at simplebus0: version 1.12 (0), address 90:59:af:82:2e:7e
ukphy0 at cpsw0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI 0x0001f0, model 0x000f
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SU32G, 0080> SCSI2 0/direct fixed
sd0: 30436MB, 512 bytes/sector, 62333952 sectors
scsibus1 at sdmmc1: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SD/MMC, MMC02G, 0000> SCSI2 0/direct fixed
sd1: 1832MB, 512 bytes/sector, 3751936 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
boot device: sd0
root on sd0a (93aae518915c8841.a) swap on sd0b dump on sd0b
WARNING: CHECK AND RESET THE DATE!


OpenBSD 6.0-current (GENERIC) #0: Mon Sep 12 14:43:20 CEST 2016
    [hidden email]:/usr/src/sys/arch/armv7/compile/GENERIC
real mem  = 536870912 (512MB)
avail mem = 517836800 (493MB)
mainbus0 at root: TI AM335x BeagleBone Black
cpu0 at mainbus0: ARM Cortex A8 R3 rev 2 (ARMv7 core)
cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
cpu0: 32KB(64b/l,4way) I-cache, 32KB(64b/l,4way) wr-back D-cache
omap0 at mainbus0
prcm0 at omap0 rev 0.2
sitaracm0 at omap0: control module, rev 1.0
omap0: device edma unit 0 not configured
dmtimer0 at omap0 rev 3.1
dmtimer1 at omap0 rev 3.1
simplebus0 at mainbus0: "ocp"
simplebus1 at simplebus0: "l4_wkup"
simplebus2 at simplebus1: "scm"
intc0 at simplebus0 rev 5.0
omgpio0 at simplebus0: rev 0.1
gpio0 at omgpio0: 32 pins
omgpio1 at simplebus0: rev 0.1
gpio1 at omgpio1: 32 pins
omgpio2 at simplebus0: rev 0.1
gpio2 at omgpio2: 32 pins
omgpio3 at simplebus0: rev 0.1
gpio3 at omgpio3: 32 pins
com0 at simplebus0: ti16750, 64 byte fifo
com0: console
tiiic0 at simplebus0 rev 0.11
iic0 at tiiic0
"ti,tps65217" at iic0 addr 0x24 not configured
"at,24c256" at iic0 addr 0x50 not configured
"nxp,tda998x" at iic0 addr 0x70 not configured
tiiic1 at simplebus0 rev 0.11
iic1 at tiiic1
"at,24c256" at iic1 addr 0x54 not configured
"at,24c256" at iic1 addr 0x55 not configured
"at,24c256" at iic1 addr 0x56 not configured
"at,24c256" at iic1 addr 0x57 not configured
ommmc0 at simplebus0
sdmmc0 at ommmc0: 1-bit, mmc high-speed
ommmc1 at simplebus0
sdmmc1 at ommmc1: 1-bit, mmc high-speed
omdog0 at simplebus0 rev 0.1
cpsw0 at simplebus0: version 1.12 (0), address 90:59:af:82:2e:7e
ukphy0 at cpsw0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI 0x0001f0, model 0x000f
scsibus0 at sdmmc0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SU32G, 0080> SCSI2 0/direct fixed
sd0: 30436MB, 512 bytes/sector, 62333952 sectors
scsibus1 at sdmmc1: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <SD/MMC, MMC02G, 0000> SCSI2 0/direct fixed
sd1: 1832MB, 512 bytes/sector, 3751936 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
boot device: sd0
root on sd0a (93aae518915c8841.a) swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
WARNING: CHECK AND RESET THE DATE!

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: sitaracm and ompinmux at Beagle Bone Black

Jonathan Gray-11
On Tue, Nov 01, 2016 at 05:21:40PM +0100, Jan Stary wrote:
> This is current on a Beagle Bone Black (dmesg below).
> Looking at the diff to the previous dmesg (also below),
> sitaracm(4) is no longer recognized - is that intended?
> On the other hand, ompinmux(4) is recognized now.

Yes, sitaracm was doing pin muxing based on static tables,
ompinmux gets the pin configuration from the fdt data.

>
> The base system seems to be running just fine with
> /etc/malloc.conf -> CFGRSU
>
> Thank you!
>
> Jan
>
>
> OpenBSD 6.0-current (GENERIC) #0: Tue Nov  1 13:16:48 CET 2016
>     [hidden email]:/sys/arch/armv7/compile/GENERIC
> real mem  = 536870912 (512MB)
> avail mem = 517873664 (493MB)
> mainbus0 at root: TI AM335x BeagleBone Black
> cpu0 at mainbus0: ARM Cortex A8 R3 rev 2 (ARMv7 core)
> cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
> cpu0: 32KB(64b/l,4way) I-cache, 32KB(64b/l,4way) wr-back D-cache
> omap0 at mainbus0
> prcm0 at omap0 rev 0.2
> omap0: device edma unit 0 not configured
> dmtimer0 at omap0 rev 3.1
> dmtimer1 at omap0 rev 3.1
> simplebus0 at mainbus0: "ocp"
> simplebus1 at simplebus0: "l4_wkup"
> simplebus2 at simplebus1: "scm"
> ompinmux0 at simplebus2
> intc0 at simplebus0 rev 5.0
> omgpio0 at simplebus0: rev 0.1
> gpio0 at omgpio0: 32 pins
> omgpio1 at simplebus0: rev 0.1
> gpio1 at omgpio1: 32 pins
> omgpio2 at simplebus0: rev 0.1
> gpio2 at omgpio2: 32 pins
> omgpio3 at simplebus0: rev 0.1
> gpio3 at omgpio3: 32 pins
> com0 at simplebus0: ti16750, 64 byte fifo
> com0: console
> tiiic0 at simplebus0 rev 0.11
> iic0 at tiiic0
> "ti,tps65217" at iic0 addr 0x24 not configured
> "at,24c256" at iic0 addr 0x50 not configured
> "nxp,tda998x" at iic0 addr 0x70 not configured
> tiiic1 at simplebus0 rev 0.11
> iic1 at tiiic1
> "at,24c256" at iic1 addr 0x54 not configured
> "at,24c256" at iic1 addr 0x55 not configured
> "at,24c256" at iic1 addr 0x56 not configured
> "at,24c256" at iic1 addr 0x57 not configured
> ommmc0 at simplebus0
> sdmmc0 at ommmc0: 4-bit, sd high-speed, mmc high-speed
> ommmc1 at simplebus0
> sdmmc1 at ommmc1: 1-bit
> omdog0 at simplebus0 rev 0.1
> cpsw0 at simplebus0: version 1.12 (0), address 90:59:af:82:2e:7e
> ukphy0 at cpsw0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI 0x0001f0, model 0x000f
> scsibus0 at sdmmc0: 2 targets, initiator 0
> sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SU32G, 0080> SCSI2 0/direct fixed
> sd0: 30436MB, 512 bytes/sector, 62333952 sectors
> scsibus1 at sdmmc1: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <SD/MMC, MMC02G, 0000> SCSI2 0/direct fixed
> sd1: 1832MB, 512 bytes/sector, 3751936 sectors
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> boot device: sd0
> root on sd0a (93aae518915c8841.a) swap on sd0b dump on sd0b
> WARNING: CHECK AND RESET THE DATE!
>
>
> OpenBSD 6.0-current (GENERIC) #0: Mon Sep 12 14:43:20 CEST 2016
>     [hidden email]:/usr/src/sys/arch/armv7/compile/GENERIC
> real mem  = 536870912 (512MB)
> avail mem = 517836800 (493MB)
> mainbus0 at root: TI AM335x BeagleBone Black
> cpu0 at mainbus0: ARM Cortex A8 R3 rev 2 (ARMv7 core)
> cpu0: DC enabled IC enabled WB disabled EABT branch prediction enabled
> cpu0: 32KB(64b/l,4way) I-cache, 32KB(64b/l,4way) wr-back D-cache
> omap0 at mainbus0
> prcm0 at omap0 rev 0.2
> sitaracm0 at omap0: control module, rev 1.0
> omap0: device edma unit 0 not configured
> dmtimer0 at omap0 rev 3.1
> dmtimer1 at omap0 rev 3.1
> simplebus0 at mainbus0: "ocp"
> simplebus1 at simplebus0: "l4_wkup"
> simplebus2 at simplebus1: "scm"
> intc0 at simplebus0 rev 5.0
> omgpio0 at simplebus0: rev 0.1
> gpio0 at omgpio0: 32 pins
> omgpio1 at simplebus0: rev 0.1
> gpio1 at omgpio1: 32 pins
> omgpio2 at simplebus0: rev 0.1
> gpio2 at omgpio2: 32 pins
> omgpio3 at simplebus0: rev 0.1
> gpio3 at omgpio3: 32 pins
> com0 at simplebus0: ti16750, 64 byte fifo
> com0: console
> tiiic0 at simplebus0 rev 0.11
> iic0 at tiiic0
> "ti,tps65217" at iic0 addr 0x24 not configured
> "at,24c256" at iic0 addr 0x50 not configured
> "nxp,tda998x" at iic0 addr 0x70 not configured
> tiiic1 at simplebus0 rev 0.11
> iic1 at tiiic1
> "at,24c256" at iic1 addr 0x54 not configured
> "at,24c256" at iic1 addr 0x55 not configured
> "at,24c256" at iic1 addr 0x56 not configured
> "at,24c256" at iic1 addr 0x57 not configured
> ommmc0 at simplebus0
> sdmmc0 at ommmc0: 1-bit, mmc high-speed
> ommmc1 at simplebus0
> sdmmc1 at ommmc1: 1-bit, mmc high-speed
> omdog0 at simplebus0 rev 0.1
> cpsw0 at simplebus0: version 1.12 (0), address 90:59:af:82:2e:7e
> ukphy0 at cpsw0 phy 0: Generic IEEE 802.3u media interface, rev. 1: OUI 0x0001f0, model 0x000f
> scsibus0 at sdmmc0: 2 targets, initiator 0
> sd0 at scsibus0 targ 1 lun 0: <SD/MMC, SU32G, 0080> SCSI2 0/direct fixed
> sd0: 30436MB, 512 bytes/sector, 62333952 sectors
> scsibus1 at sdmmc1: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <SD/MMC, MMC02G, 0000> SCSI2 0/direct fixed
> sd1: 1832MB, 512 bytes/sector, 3751936 sectors
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> boot device: sd0
> root on sd0a (93aae518915c8841.a) swap on sd0b dump on sd0b
> WARNING: / was not properly unmounted
> WARNING: CHECK AND RESET THE DATE!
>

Loading...