siop driver bug

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

siop driver bug

Csaba ASZALAI
hi,

3.8-stable still contains the siop driver bug, please corrent it.
3.7-stable and 3.8-current works perfectly.
best regards,

        csaba

--- dmesg.37    Mon Nov 14 08:32:39 2005
+++ dmesg.38    Mon Nov 14 09:00:45 2005
@@ -1,9 +1,9 @@
-OpenBSD 3.7-stable
+OpenBSD 3.8-stable
     root@xxxxxxxxxxxx:/usr/src/sys/arch/i386/compile/bud
 cpu0: Intel(R) Pentium(R) III CPU - S 1400MHz ("GenuineIntel" 686-class) 1.40 GHz
 cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE
 real mem  = 1073250304 (1048096K)
-avail mem = 972709888 (949912K)
+avail mem = 972587008 (949792K)
 using 4278 buffers containing 53764096 bytes (52504K) of memory
 mainbus0 (root)
 bios0 at mainbus0: AT/286+(ff) BIOS, date 08/13/02, BIOS32 rev. 0 @ 0xfd8f0
@@ -21,14 +21,13 @@
 scsibus0 at siop0: 16 targets
 sd0 at scsibus0 targ 0 lun 0: <SEAGATE, ST318404LC, 0006> SCSI3 0/direct fixed
 sd0: 17366MB, 14384 cyl, 6 head, 412 sec, 512 bytes/sec, 35566480 sec total
-uk0 at scsibus0 targ 8 lun 0: <SDR, GEM318, 0> SCSI2 3/processor fixed
-uk0: unknown device
+safte0 at scsibus0 targ 8 lun 0: <SDR, GEM318, 0> SCSI2 3/processor fixed
 pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20HE Host" rev 0x01
 pchb2 at pci0 dev 0 function 2 "ServerWorks I/O Bridge" rev 0x01
 pchb3 at pci0 dev 0 function 3 "ServerWorks I/O Bridge" rev 0x01
 pci2 at pchb3 bus 2
 vga1 at pci0 dev 4 function 0 "ATI Rage XL" rev 0x27
-wsdisplay0 at vga1: console (80x25, vt100 emulation)
+wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
 wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
 fxp0 at pci0 dev 10 function 0 "Intel 82557" rev 0x09, i82559S: irq 9, address 00:30:05:3e:34:2c
 inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
@@ -43,16 +42,17 @@
 ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x04: irq 9, version 1.0, legacy support
 usb0 at ohci0: USB revision 1.0
 uhub0 at usb0
-uhub0: ServerWorks OHCI root hub, class 9/0, rev 1.00/1.00, addr 1
+uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
 uhub0: 4 ports with 4 removable, self powered
 isa0 at pcib0
 isadma0 at isa0
 pckbc0 at isa0 port 0x60/5
 pckbd0 at pckbc0 (kbd slot)
 pckbc0: using irq 1 for kbd slot
-wskbd0 at pckbd0 (mux 1 ignored for console): console keyboard, using wsdisplay0
+wskbd0 at pckbd0: console keyboard, using wsdisplay0
 pcppi0 at isa0 port 0x61
 midi0 at pcppi0: <PC speaker>
+spkr0 at pcppi0
 sysbeep0 at pcppi0
 npx0 at isa0 port 0xf0/16: using exception 16
 pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
@@ -63,6 +63,15 @@
 pctr: 686-class user-level performance counters enabled
 mtrr: Pentium Pro MTRR support
 siop0: target 0 now using tagged DT 16 bit 80.0 MHz 62 REQ/ACK offset xfers
-dkcsum: sd0 matched BIOS disk 80
+dkcsum: sd0 matches BIOS drive 0x80
 root on sd0a
 rootdev=0x400 rrootdev=0xd00 rawdev=0xd02
+siop0: target 8 now using 8 bit async xfers
+error, DSP=0x58
+siop0: phase mismatch without command
+siop0: unhandled scsi interrupt, sist=0x90 sstat1=0x5 DSA=0xffffffff DSP=0x2c0
+siop0: scsi bus reset
+siop0: target 0 now using tagged DT 8 bit async xfers
+siop0: target 8 now using 8 bit async xfers
+siop0: target 0 now using tagged DT 16 bit 80.0 MHz 62 REQ/ACK offset xfers
+siop0: target 8 now using 8 bit async xfers

sd0(siop0:0:0): cmd 0xd17d7c68 (tag 1) added to reset list
sd0(siop0:0:0): cmd 0xd17d7cd0 (tag 2) added to reset list
sd0(siop0:0:0): cmd 0xd17d4938 (tag 3) added to reset list
sd0(siop0:0:0): cmd 0xd17d7da0 (tag 4) added to reset list
sd0(siop0:0:0): cmd 0xd17d79a0 (tag 5) added to reset list
sd0(siop0:0:0): cmd 0xd17d4400 (tag 6) added to reset list
sd0(siop0:0:0): cmd 0xd17d7d04 (tag 7) added to reset list
sd0(siop0:0:0): cmd 0xd17d4434 (tag 8) added to reset list
sd0(siop0:0:0): cmd 0xd17d4904 (tag 9) added to reset list
sd0(siop0:0:0): cmd 0xd17d7400 (tag 10) added to reset list
sd0(siop0:0:0): cmd 0xd17d7938 (tag 11) added to reset list
sd0(siop0:0:0): cmd 0xd17d4c68 (tag 12) added to reset list
sd0(siop0:0:0): cmd 0xd17d7034 (tag 13) added to reset list
sd0(siop0:0:0): cmd 0xd17d4868 (tag 14) added to reset list
sd0(siop0:0:0): cmd 0xd17d71a0 (tag 15) added to reset list
siop0: target 0 now using tagged DT 8 bit async xfers
siop0: target 8 now using 8 bit async xfers
sd0(siop0:0:0): cmd 0xd17d7068 added to reset list from ready list
sd0(siop0:0:0): cmd 0xd17d7c68 (status 2) reset with status 6, xs->error 8
sd0(siop0:0:0): cmd 0xd17d7cd0 (status 2) reset with status 6, xs->error 8
sd0(siop0:0:0): cmd 0xd17d4938 (status 2) reset with status 6, xs->error 8
sd0(siop0:0:0): cmd 0xd17d7da0 (status 2) reset with status 6, xs->error 8
sd0(siop0:0:0): cmd 0xd17d79a0 (status 2) reset with status 6, xs->error 8
sd0(siop0:0:0): cmd 0xd17d4400 (status 2) reset with status 6, xs->error 8
sd0(siop0:0:0): cmd 0xd17d7d04 (status 2) reset with status 6, xs->error 8
sd0(siop0:0:0): cmd 0xd17d4434 (status 2) reset with status 6, xs->error 8
sd0(siop0:0:0): cmd 0xd17d4904 (status 2) reset with status 6, xs->error 8
sd0(siop0:0:0): cmd 0xd17d7400 (status 2) reset with status 6, xs->error 8
sd0(siop0:0:0): cmd 0xd17d7938 (status 2) reset with status 6, xs->error 8
sd0(siop0:0:0): cmd 0xd17d4c68 (status 2) reset with status 6, xs->error 8
sd0(siop0:0:0): cmd 0xd17d7034 (status 2) reset with status 6, xs->error 8
sd0(siop0:0:0): cmd 0xd17d4868 (status 2) reset with status 6, xs->error 8
sd0(siop0:0:0): cmd 0xd17d71a0 (status 2) reset with status 6, xs->error 8
sd0(siop0:0:0): cmd 0xd17d7068 (status 1) reset with status 6, xs->error 8
siop0: target 0 now using tagged DT 16 bit 80.0 MHz 62 REQ/ACK offset xfers
siop0: target 8 now using 8 bit async xfers