several X servers on one host

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

several X servers on one host

Alexei Malinin
Hello.

Recently I tried to run two X servers on i386 OpenBSD-5.2:

ttyC2$ startx -- :0    OK
ttyC3$ startx -- :1    but this server was aborted due to segmentation fault

I succesfully ran two X servers on previous versions of i386 OpenBSD and
linux
without problems.

Please tell me what I'm doing wrong?


--
Alexei Malinin


My current environment is:
- machdep.allowaperture is set to 2
- there is no /etc/X11/xorg.conf

dmesg:
------

OpenBSD 5.2 (GENERIC) #278: Wed Aug  1 10:04:16 MDT 2012
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.60GHz ("GenuineIntel" 686-class) 1.60 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem  = 1063710720 (1014MB)
avail mem = 1035472896 (987MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/01/06, BIOS32 rev. 0 @ 0xfd760, SMBIOS rev. 2.33 @ 0xe0010 (60 entries)
bios0: vendor IBM version "1VET71WW (1.29 )" date 12/01/2006
bios0: IBM 2887K2G
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA BOOT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) PCI0(S3) PCI1(S4) DOCK(S4) USB0(S3) USB1(S3) USB2(S3) AC9M(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (PCI1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature is 94 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "IBM-08K8193" serial 11607 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: DOCK not docked (0)
bios0: ROM list: 0xc0000/0xd000! 0xcd000/0x1000 0xce000/0x1000 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
cpu0: Enhanced SpeedStep 1595 MHz: speeds: 1600, 1400, 1200, 1000, 800, 600 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82855GM Host" rev 0x02
"Intel 82855GM Memory" rev 0x02 at pci0 dev 0 function 1 not configured
"Intel 82855GM Config" rev 0x02 at pci0 dev 0 function 3 not configured
vga1 at pci0 dev 2 function 0 "Intel 82855GM Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x8000000
inteldrm0 at vga1: irq 3
drm0 at inteldrm0
"Intel 82855GM Video" rev 0x02 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: irq 3
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: irq 6
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x01: irq 5
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 2
mem address conflict 0xb0000000/0x1000
mem address conflict 0xb1000000/0x800
cbb0 at pci1 dev 0 function 0 "TI PCI4510 CardBus" rev 0x03: irq 3
"TI PCI4510 FireWire" rev 0x01 at pci1 dev 0 function 1 not configured
em0 at pci1 dev 1 function 0 "Intel PRO/1000MT Mobile (82541GI)" rev 0x00: irq 7, address 00:11:25:d6:1b:59
iwi0 at pci1 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05: irq 9, address 00:12:f0:bc:00:76
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DBM LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DBM IDE" rev 0x01: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <ST960821A>
wd0: 16-sector PIO, LBA48, 57231MB, 117210240 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4241N, 1.04> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801DB SMBus" rev 0x01: irq 4
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR SDRAM non-parity PC2700CL2.5
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: irq 4, ICH4 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
"Intel 82801DB Modem" rev 0x01 at pci0 dev 31 function 6 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 5.9
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (194861497ffaa8a0.a) swap on wd0b dump on wd0b
wsdisplay0: screen 1 deleted
wsdisplay0: screen 1 added (80x25bf, vt100 emulation)
wsdisplay0: screen 2 deleted
wsdisplay0: screen 2 added (80x25bf, vt100 emulation)
wsdisplay0: screen 3 deleted
wsdisplay0: screen 3 added (80x25bf, vt100 emulation)
wsdisplay0: screen 4 deleted
wsdisplay0: screen 4 added (80x25bf, vt100 emulation)
wsdisplay0: screen 5 deleted

startx-0.log:
-------------

xauth: (stdin):1:  bad display name "mc.amt.ru:0" in "add" command
X.Org X Server 1.12.2
Release Date: 2012-05-29
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 5.2 i386
Current Operating System: OpenBSD mc.amt.ru 5.2 GENERIC#278 i386
Build Date: 22 July 2012  10:21:16PM
Current version of pixman: 0.24.4
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec  2 19:56:52 2012
(==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
is crt
is lvds
is lvds
is crt
is lvds
is crt
xinit: connection to X server lost
waiting for X server to shut down .Server terminated successfully (0). Closing log file.
xauth: (argv):1:  bad display name "mc.amt.ru:0" in "remove" command

Xorg.0.log:
-----------

[   205.400] (--) checkDevMem: using aperture driver /dev/xf86
[   205.411] (--) Using wscons driver on /dev/ttyC2 in pcvt compatibility mode (version 3.32)
[   206.433]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[   206.433] X Protocol Version 11, Revision 0
[   206.433] Build Operating System: OpenBSD 5.2 i386
[   206.433] Current Operating System: OpenBSD mc.amt.ru 5.2 GENERIC#278 i386
[   206.433] Build Date: 22 July 2012  10:21:16PM
[   206.433]  
[   206.433] Current version of pixman: 0.24.4
[   206.433] Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   206.433] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   206.433] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec  2 19:56:52 2012
[   206.434] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[   206.434] (==) No Layout section.  Using the first Screen section.
[   206.434] (==) No screen section available. Using defaults.
[   206.434] (**) |-->Screen "Default Screen Section" (0)
[   206.434] (**) |   |-->Monitor "<default monitor>"
[   206.434] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[   206.434] (==) Disabling SIGIO handlers for input devices
[   206.434] (==) Automatically adding devices
[   206.434] (==) Automatically enabling devices
[   206.434] (==) FontPath set to:
        /usr/X11R6/lib/X11/fonts/misc/,
        /usr/X11R6/lib/X11/fonts/TTF/,
        /usr/X11R6/lib/X11/fonts/OTF/,
        /usr/X11R6/lib/X11/fonts/Type1/,
        /usr/X11R6/lib/X11/fonts/100dpi/,
        /usr/X11R6/lib/X11/fonts/75dpi/
[   206.434] (==) ModulePath set to "/usr/X11R6/lib/modules"
[   206.434] (II) The server relies on wscons to provide the list of input devices.
        If no devices become available, reconfigure wscons or disable AutoAddDevices.
[   206.435] (II) Loader magic: 0x3c021020
[   206.435] (II) Module ABI versions:
[   206.435] X.Org ANSI C Emulation: 0.4
[   206.435] X.Org Video Driver: 12.0
[   206.435] X.Org XInput driver : 16.0
[   206.435] X.Org Server Extension : 6.0
[   206.435] (--) PCI:*(0:0:2:0) 8086:3582:1014:0557 rev 2, Mem @ 0xe0000000/134217728, 0xd0000000/524288, I/O @ 0x00001800/8
[   206.435] (--) PCI: (0:0:2:1) 8086:3582:1014:0557 rev 2, Mem @ 0xe8000000/134217728, 0xd0080000/524288
[   206.435] (II) LoadModule: "extmod"
[   206.436] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[   206.436] (II) Module extmod: vendor="X.Org Foundation"
[   206.436] compiled for 1.12.2, module version = 1.0.0
[   206.436] Module class: X.Org Server Extension
[   206.436] ABI class: X.Org Server Extension, version 6.0
[   206.436] (II) Loading extension MIT-SCREEN-SAVER
[   206.436] (II) Loading extension XFree86-VidModeExtension
[   206.436] (II) Loading extension XFree86-DGA
[   206.436] (II) Loading extension DPMS
[   206.436] (II) Loading extension XVideo
[   206.436] (II) Loading extension XVideo-MotionCompensation
[   206.436] (II) Loading extension X-Resource
[   206.436] (II) LoadModule: "dbe"
[   206.437] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[   206.437] (II) Module dbe: vendor="X.Org Foundation"
[   206.437] compiled for 1.12.2, module version = 1.0.0
[   206.437] Module class: X.Org Server Extension
[   206.437] ABI class: X.Org Server Extension, version 6.0
[   206.437] (II) Loading extension DOUBLE-BUFFER
[   206.437] (II) LoadModule: "glx"
[   206.438] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[   206.439] (II) Module glx: vendor="X.Org Foundation"
[   206.439] compiled for 1.12.2, module version = 1.0.0
[   206.439] ABI class: X.Org Server Extension, version 6.0
[   206.439] (==) AIGLX enabled
[   206.439] (II) Loading extension GLX
[   206.439] (II) LoadModule: "record"
[   206.439] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[   206.440] (II) Module record: vendor="X.Org Foundation"
[   206.440] compiled for 1.12.2, module version = 1.13.0
[   206.440] Module class: X.Org Server Extension
[   206.440] ABI class: X.Org Server Extension, version 6.0
[   206.440] (II) Loading extension RECORD
[   206.440] (II) LoadModule: "dri"
[   206.441] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[   206.441] (II) Module dri: vendor="X.Org Foundation"
[   206.441] compiled for 1.12.2, module version = 1.0.0
[   206.441] ABI class: X.Org Server Extension, version 6.0
[   206.441] (II) Loading extension XFree86-DRI
[   206.441] (II) LoadModule: "dri2"
[   206.442] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[   206.442] (II) Module dri2: vendor="X.Org Foundation"
[   206.442] compiled for 1.12.2, module version = 1.2.0
[   206.442] ABI class: X.Org Server Extension, version 6.0
[   206.442] (II) Loading extension DRI2
[   206.442] (==) Matched intel as autoconfigured driver 0
[   206.442] (==) Matched vesa as autoconfigured driver 1
[   206.442] (==) Assigned the driver to the xf86ConfigLayout
[   206.442] (II) LoadModule: "intel"
[   206.443] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[   206.444] (II) Module intel: vendor="X.Org Foundation"
[   206.444] compiled for 1.12.2, module version = 2.12.0
[   206.444] Module class: X.Org Video Driver
[   206.444] ABI class: X.Org Video Driver, version 12.0
[   206.444] (II) LoadModule: "vesa"
[   206.445] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[   206.445] (II) Module vesa: vendor="X.Org Foundation"
[   206.445] compiled for 1.12.2, module version = 2.3.1
[   206.445] Module class: X.Org Video Driver
[   206.445] ABI class: X.Org Video Driver, version 12.0
[   206.445] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
        965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
        4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
        Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
        Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
        Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
        Sandybridge Server
[   206.445] (II) VESA: driver for VESA chipsets: vesa
[   206.445] (WW) Falling back to old probe method for vesa
[   206.446] (II) Loading sub module "vgahw"
[   206.446] (II) LoadModule: "vgahw"
[   206.447] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
[   206.447] (II) Module vgahw: vendor="X.Org Foundation"
[   206.447] compiled for 1.12.2, module version = 0.1.0
[   206.447] ABI class: X.Org Video Driver, version 12.0
[   206.447] (II) Loading sub module "ramdac"
[   206.447] (II) LoadModule: "ramdac"
[   206.447] (II) Module "ramdac" already built-in
[   206.447] drmOpenDevice: node name is /dev/drm0
[   206.447] drmOpenDevice: open result is 10, (OK)
[   206.448] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[   206.448] drmOpenDevice: node name is /dev/drm0
[   206.448] drmOpenDevice: open result is 10, (OK)
[   206.448] drmOpenByBusid: drmOpenMinor returns 10
[   206.448] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[   206.448] (II) intel(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[   206.448] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   206.448] (==) intel(0): RGB weight 888
[   206.448] (==) intel(0): Default visual is TrueColor
[   206.448] (II) intel(0): Integrated Graphics Chipset: Intel(R) 852GM/855GM
[   206.448] (--) intel(0): Chipset: "852GM/855GM"
[   206.448] (--) intel(0): Linear framebuffer at 0xE0000000
[   206.448] (--) intel(0): IO registers at addr 0xD0000000 size 524288
[   206.448] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[   206.448] (II) intel(0): No SDVO device is found in VBT
[   206.448] (II) intel(0): 2 display pipes available.
[   206.448] (II) Loading sub module "ddc"
[   206.448] (II) LoadModule: "ddc"
[   206.448] (II) Module "ddc" already built-in
[   206.449] (II) Loading sub module "i2c"
[   206.449] (II) LoadModule: "i2c"
[   206.449] (II) Module "i2c" already built-in
[   206.449] (II) intel(0): Output VGA has no monitor section
[   206.449] (II) intel(0): Output LVDS has no monitor section
[   206.449] (II) intel(0): I2C bus "LVDSDDC_C" initialized.
[   206.449] (II) intel(0): Attempting to determine panel fixed mode.
[   206.449] (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
[   206.453] (II) intel(0): EDID for output LVDS
[   206.453] (II) intel(0): I2C bus "DVODDC_D" initialized.
[   206.453] (II) Loading sub module "sil164"
[   206.453] (II) LoadModule: "sil164"
[   206.454] (II) Loading /usr/X11R6/lib/modules/drivers/sil164.so
[   206.454] (II) Module sil164: vendor="X.Org Foundation"
[   206.454] compiled for 1.12.2, module version = 1.0.0
[   206.454] ABI class: X.Org Video Driver, version 12.0
[   206.454] (II) intel(0): I2C bus "DVOI2C_E" initialized.
[   206.455] (II) Loading sub module "ch7xxx"
[   206.455] (II) LoadModule: "ch7xxx"
[   206.455] (II) Loading /usr/X11R6/lib/modules/drivers/ch7xxx.so
[   206.455] (II) Module ch7xxx: vendor="X.Org Foundation"
[   206.455] compiled for 1.12.2, module version = 1.0.0
[   206.455] ABI class: X.Org Video Driver, version 12.0
[   206.455] (II) intel(0): I2C bus "DVOI2C_E" removed.
[   206.455] (II) intel(0): I2C bus "DVOI2C_E" initialized.
[   206.456] (II) Loading sub module "ivch"
[   206.456] (II) LoadModule: "ivch"
[   206.456] (II) Loading /usr/X11R6/lib/modules/drivers/ivch.so
[   206.457] (II) Module ivch: vendor="X.Org Foundation"
[   206.457] compiled for 1.12.2, module version = 1.0.0
[   206.457] ABI class: X.Org Video Driver, version 12.0
[   206.457] (II) intel(0): I2C bus "DVOI2C_E" removed.
[   206.457] (II) intel(0): I2C bus "DVOI2C_B" initialized.
[   206.457] (II) Loading sub module "tfp410"
[   206.457] (II) LoadModule: "tfp410"
[   206.458] (II) Loading /usr/X11R6/lib/modules/drivers/tfp410.so
[   206.458] (II) Module tfp410: vendor="X.Org Foundation"
[   206.458] compiled for 1.12.2, module version = 1.0.0
[   206.458] ABI class: X.Org Video Driver, version 12.0
[   206.458] (II) intel(0): I2C bus "DVOI2C_B" removed.
[   206.458] (II) intel(0): I2C bus "DVOI2C_E" initialized.
[   206.459] (II) Loading sub module "ch7017"
[   206.459] (II) LoadModule: "ch7017"
[   206.459] (II) Loading /usr/X11R6/lib/modules/drivers/ch7017.so
[   206.460] (II) Module ch7017: vendor="X.Org Foundation"
[   206.460] compiled for 1.12.2, module version = 1.0.0
[   206.460] ABI class: X.Org Video Driver, version 12.0
[   206.460] (II) intel(0): I2C bus "DVOI2C_E" removed.
[   206.460] (II) intel(0): I2C bus "DVOI2C_E" initialized.
[   206.461] (II) intel(0): I2C bus "DVOI2C_E" removed.
[   206.461] (II) intel(0): I2C bus "DVODDC_D" removed.
[   206.599] is crt
[   206.819] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[   206.820] (II) intel(0): I2C bus "CRTDDC_A" removed.
[   207.239] (II) intel(0): EDID for output VGA
[   207.243] (II) intel(0): EDID for output LVDS
[   207.243] (II) intel(0): Printing probed modes for output LVDS
[   207.243] (II) intel(0): Modeline "1024x768"x60.0   65.00  1024 1048 1184 1344  768 771 777 806 (48.4 kHz P)
[   207.243] (II) intel(0): Output VGA disconnected
[   207.243] (II) intel(0): Output LVDS connected
[   207.243] (II) intel(0): Using exact sizes for initial modes
[   207.243] (II) intel(0): Output LVDS using initial mode 1024x768
[   207.243] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[   207.822] (II) intel(0): detected 128 kB GTT.
[   207.822] (II) intel(0): detected 8060 kB stolen memory.
[   207.822] (==) intel(0): video overlay key set to 0x101fe
[   207.822] (==) intel(0): DPI set to (96, 96)
[   207.822] (II) Loading sub module "fb"
[   207.822] (II) LoadModule: "fb"
[   207.823] (II) Loading /usr/X11R6/lib/modules/libfb.so
[   207.824] (II) Module fb: vendor="X.Org Foundation"
[   207.824] compiled for 1.12.2, module version = 1.0.0
[   207.824] ABI class: X.Org ANSI C Emulation, version 0.4
[   207.824] (II) UnloadModule: "vesa"
[   207.824] (II) Unloading vesa
[   207.825] (==) Depth 24 pixmap format is 32 bpp
[   207.825] (II) intel(0): Kernel reported 241152 total, 0 used
[   207.825] (II) intel(0): I830CheckAvailableMemory: 964608 kB available
[   207.825] (II) intel(0): [DRI2] Setup complete
[   207.825] (II) intel(0): [DRI2]   DRI driver: i915
[   207.825] (**) intel(0): Framebuffer tiled
[   207.825] (**) intel(0): Pixmaps tiled
[   207.825] (**) intel(0): 3D buffers tiled
[   207.825] (**) intel(0): SwapBuffers wait enabled
[   207.828] (==) intel(0): VideoRam: 131072 KB
[   207.828] (WW) intel(0): xf86AllocateGARTMemory: allocation of 10 pages failed
        (Cannot allocate memory)
[   207.829] (II) intel(0): Allocated new frame buffer 1024x768 stride 4096, tiled
[   207.829] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[   207.829] (II) UXA(0): Driver registered support for the following operations:
[   207.829] (II)         solid
[   207.829] (II)         copy
[   207.829] (II)         composite (RENDER acceleration)
[   207.829] (II)         put_image
[   207.829] (II)         get_image
[   207.829] (==) intel(0): Backing store disabled
[   207.829] (==) intel(0): Silken mouse disabled
[   207.829] (II) intel(0): Initializing HW Cursor
[   208.255] (II) intel(0): xf86BindGARTMemory: bind key 10 at 0x07ff5000 (pgoffset 32757)
[   208.255] (II) intel(0): xf86BindGARTMemory: bind key 11 at 0x07ff6000 (pgoffset 32758)
[   208.255] (II) intel(0): xf86BindGARTMemory: bind key 12 at 0x07ffa000 (pgoffset 32762)
[   208.255] (II) intel(0): xf86BindGARTMemory: bind key 13 at 0x07ffb000 (pgoffset 32763)
[   208.255] (II) intel(0): xf86BindGARTMemory: bind key 14 at 0x07fff000 (pgoffset 32767)
[   208.255] (II) intel(0): Fixed memory allocation layout:
[   208.255] (II) intel(0): 0x007df000:            end of stolen memory
[   208.255] (II) intel(0): 0x007df000-0x07ff4fff: DRI memory manager (122968 kB)
[   208.256] (II) intel(0): 0x07ff5000-0x07ff5fff: Core cursor (4 kB, 0x000000003b4c0000 physical
)
[   208.256] (II) intel(0): 0x07ff6000-0x07ff9fff: ARGB cursor (16 kB, 0x000000003920c000 physical
)
[   208.256] (II) intel(0): 0x07ffa000-0x07ffafff: Core cursor (4 kB, 0x000000003ab99000 physical
)
[   208.256] (II) intel(0): 0x07ffb000-0x07ffefff: ARGB cursor (16 kB, 0x00000000394e2000 physical
)
[   208.256] (II) intel(0): 0x07fff000-0x07ffffff: overlay registers (4 kB, 0x000000003b988000 physical
)
[   208.256] (II) intel(0): 0x08000000:            end of aperture
[   208.256] (II) intel(0): BO memory allocation layout:
[   208.256] (II) intel(0): 0x007df000:            start of memory manager
[   208.256] (II) intel(0): 0x07ff5000:            end of memory manager
[   208.499] is lvds
[   208.499] (II) intel(0): using SSC reference clock of 66 MHz
[   208.501] (WW) intel(0): Chosen PLL clock of 66.5 Mhz more than 2% away from desired 65.0 Mhz
[   208.501] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[   208.939] (II) intel(0): Output configuration:
[   208.939] (II) intel(0):   Pipe A is off
[   208.939] (II) intel(0):   Display plane A is now disabled and connected to pipe A.
[   208.939] (WW) intel(0):   Hardware claims pipe A is on while software believes it is off
[   208.939] (II) intel(0):   Pipe B is on
[   208.939] (II) intel(0):   Display plane B is now enabled and connected to pipe B.
[   208.939] (II) intel(0):   Output VGA is connected to pipe none
[   208.939] (II) intel(0):   Output LVDS is connected to pipe B
[   208.939] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[   208.939] (==) intel(0): DPMS enabled
[   208.939] (==) intel(0): Intel XvMC decoder disabled
[   208.939] (II) intel(0): Set up overlay video
[   208.939] (II) intel(0): direct rendering: DRI2 Enabled
[   208.939] (--) RandR disabled
[   208.940] (II) Initializing built-in extension Generic Event Extension
[   208.940] (II) Initializing built-in extension SHAPE
[   208.940] (II) Initializing built-in extension MIT-SHM
[   208.940] (II) Initializing built-in extension XInputExtension
[   208.940] (II) Initializing built-in extension XTEST
[   208.940] (II) Initializing built-in extension BIG-REQUESTS
[   208.940] (II) Initializing built-in extension SYNC
[   208.940] (II) Initializing built-in extension XKEYBOARD
[   208.940] (II) Initializing built-in extension XC-MISC
[   208.940] (II) Initializing built-in extension SECURITY
[   208.940] (II) Initializing built-in extension XINERAMA
[   208.940] (II) Initializing built-in extension XFIXES
[   208.940] (II) Initializing built-in extension RENDER
[   208.940] (II) Initializing built-in extension RANDR
[   208.940] (II) Initializing built-in extension COMPOSITE
[   208.940] (II) Initializing built-in extension DAMAGE
[   208.979] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[   208.979] (II) AIGLX: enabled GLX_INTEL_swap_event
[   208.979] (II) AIGLX: enabled GLX_SGI_make_current_read
[   208.979] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[   208.980] (II) AIGLX: Loaded and initialized i915
[   208.980] (II) GLX: Initialized DRI2 GL provider for screen 0
[   208.981] (II) intel(0): Setting screen physical size to 270 x 203
[   209.228] (II) config/wscons: checking input device /dev/wskbd
[   209.228] (II) wskbd: ignoring "user" layout
[   209.228] (II) LoadModule: "kbd"
[   209.229] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[   209.230] (II) Module kbd: vendor="X.Org Foundation"
[   209.230] compiled for 1.12.2, module version = 1.6.1
[   209.230] Module class: X.Org XInput Driver
[   209.230] ABI class: X.Org XInput driver, version 16.0
[   209.230] (II) Using input driver 'kbd' for '/dev/wskbd'
[   209.230] (**) /dev/wskbd: always reports core events
[   209.230] (**) /dev/wskbd: always reports core events
[   209.230] (**) Option "Protocol" "standard"
[   209.230] (**) Option "XkbRules" "base"
[   209.230] (**) Option "XkbModel" "pc105"
[   209.230] (**) Option "XkbLayout" "us"
[   209.230] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[   209.683] (II) config/wscons: checking input device /dev/wsmouse0
[   209.683] (II) LoadModule: "synaptics"
[   209.684] (II) Loading /usr/X11R6/lib/modules/input/synaptics_drv.so
[   209.685] (II) Module synaptics: vendor="X.Org Foundation"
[   209.685] compiled for 1.12.2, module version = 1.6.2
[   209.685] Module class: X.Org XInput Driver
[   209.685] ABI class: X.Org XInput driver, version 16.0
[   209.685] (II) Using input driver 'synaptics' for '/dev/wsmouse0'
[   209.685] (**) /dev/wsmouse0: always reports core events
[   209.685] (**) Option "Device" "/dev/wsmouse0"
[   210.625] (--) synaptics: /dev/wsmouse0: x-axis range 1472 - 5472 resolution 88
[   210.625] (--) synaptics: /dev/wsmouse0: y-axis range 1408 - 4448 resolution 110
[   210.625] (**) /dev/wsmouse0: always reports core events
[   210.625] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type: TOUCHPAD, id 7)
[   210.625] (**) synaptics: /dev/wsmouse0: (accel) MinSpeed is now constant deceleration 2.5
[   210.625] (**) synaptics: /dev/wsmouse0: MaxSpeed is now 1.75
[   210.625] (**) synaptics: /dev/wsmouse0: AccelFactor is now 0.040
[   210.625] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[   210.625] (**) /dev/wsmouse0: (accel) acceleration profile 1
[   210.625] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[   210.625] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[   211.080] (II) config/wscons: checking input device /dev/wsmouse
[   211.080] (II) LoadModule: "ws"
[   211.081] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[   211.081] (II) Module ws: vendor="X.Org Foundation"
[   211.081] compiled for 1.12.2, module version = 1.3.0
[   211.081] Module class: X.Org XInput Driver
[   211.081] ABI class: X.Org XInput driver, version 16.0
[   211.081] (II) Using input driver 'ws' for '/dev/wsmouse'
[   211.081] (**) /dev/wsmouse: always reports core events
[   211.081] (II) ws: /dev/wsmouse: debuglevel 0
[   211.081] (**) Option "Device" "/dev/wsmouse"
[   211.081] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[   211.082] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[   211.082] (**) ws: /dev/wsmouse: associated screen: 0
[   211.082] (II) ws: /dev/wsmouse: minimum x position: 0
[   211.082] (II) ws: /dev/wsmouse: maximum x position: 1023
[   211.082] (II) ws: /dev/wsmouse: minimum y position: 0
[   211.082] (II) ws: /dev/wsmouse: maximum y position: 767
[   211.082] (==) ws: /dev/wsmouse: Buttons: 7
[   211.082] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[   211.082] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 8)
[   211.082] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[   211.082] (**) /dev/wsmouse: (accel) acceleration profile 0
[   211.082] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[   211.082] (**) /dev/wsmouse: (accel) acceleration threshold: 4
[   213.991] (II) AIGLX: Suspending AIGLX clients for VT switch
[   214.842] (II) intel(0): xf86UnbindGARTMemory: unbind key 10
[   214.842] (II) intel(0): xf86UnbindGARTMemory: unbind key 11
[   214.842] (II) intel(0): xf86UnbindGARTMemory: unbind key 12
[   214.842] (II) intel(0): xf86UnbindGARTMemory: unbind key 13
[   214.842] (II) intel(0): xf86UnbindGARTMemory: unbind key 14
[   271.931] (II) AIGLX: Resuming AIGLX clients after VT switch
[   272.544] (II) intel(0): xf86BindGARTMemory: bind key 10 at 0x07ff5000 (pgoffset 32757)
[   272.544] (II) intel(0): xf86BindGARTMemory: bind key 11 at 0x07ff6000 (pgoffset 32758)
[   272.544] (II) intel(0): xf86BindGARTMemory: bind key 12 at 0x07ffa000 (pgoffset 32762)
[   272.544] (II) intel(0): xf86BindGARTMemory: bind key 13 at 0x07ffb000 (pgoffset 32763)
[   272.544] (II) intel(0): xf86BindGARTMemory: bind key 14 at 0x07fff000 (pgoffset 32767)
[   272.544] (II) intel(0): Fixed memory allocation layout:
[   272.544] (II) intel(0): 0x007df000:            end of stolen memory
[   272.544] (II) intel(0): 0x007df000-0x07ff4fff: DRI memory manager (122968 kB)
[   272.544] (II) intel(0): 0x07ff5000-0x07ff5fff: Core cursor (4 kB, 0x000000003b4c0000 physical
)
[   272.544] (II) intel(0): 0x07ff6000-0x07ff9fff: ARGB cursor (16 kB, 0x000000003920c000 physical
)
[   272.544] (II) intel(0): 0x07ffa000-0x07ffafff: Core cursor (4 kB, 0x000000003ab99000 physical
)
[   272.544] (II) intel(0): 0x07ffb000-0x07ffefff: ARGB cursor (16 kB, 0x00000000394e2000 physical
)
[   272.544] (II) intel(0): 0x07fff000-0x07ffffff: overlay registers (4 kB, 0x000000003b988000 physical
)
[   272.544] (II) intel(0): 0x08000000:            end of aperture
[   272.544] (II) intel(0): BO memory allocation layout:
[   272.544] (II) intel(0): 0x007df000:            start of memory manager
[   272.544] (II) intel(0): 0x07ff5000:            end of memory manager
[   272.780] is lvds
[   272.780] (II) intel(0): using SSC reference clock of 66 MHz
[   272.782] (WW) intel(0): Chosen PLL clock of 66.5 Mhz more than 2% away from desired 65.0 Mhz
[   272.782] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[   273.220] (II) intel(0): Output configuration:
[   273.220] (II) intel(0):   Pipe A is off
[   273.220] (II) intel(0):   Display plane A is now disabled and connected to pipe A.
[   273.220] (WW) intel(0):   Hardware claims pipe A is on while software believes it is off
[   273.220] (II) intel(0):   Pipe B is on
[   273.220] (II) intel(0):   Display plane B is now enabled and connected to pipe B.
[   273.220] (II) intel(0):   Output VGA is connected to pipe none
[   273.220] (II) intel(0):   Output LVDS is connected to pipe B
[   273.260] is crt
[   273.480] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[   273.481] (II) intel(0): I2C bus "CRTDDC_A" removed.
[   274.416] (II) AIGLX: Suspending AIGLX clients for VT switch
[   275.273] (II) intel(0): xf86UnbindGARTMemory: unbind key 10
[   275.273] (II) intel(0): xf86UnbindGARTMemory: unbind key 11
[   275.273] (II) intel(0): xf86UnbindGARTMemory: unbind key 12
[   275.273] (II) intel(0): xf86UnbindGARTMemory: unbind key 13
[   275.273] (II) intel(0): xf86UnbindGARTMemory: unbind key 14
[   308.272] (II) AIGLX: Resuming AIGLX clients after VT switch
[   308.884] (II) intel(0): xf86BindGARTMemory: bind key 10 at 0x07ff5000 (pgoffset 32757)
[   308.885] (II) intel(0): xf86BindGARTMemory: bind key 11 at 0x07ff6000 (pgoffset 32758)
[   308.885] (II) intel(0): xf86BindGARTMemory: bind key 12 at 0x07ffa000 (pgoffset 32762)
[   308.885] (II) intel(0): xf86BindGARTMemory: bind key 13 at 0x07ffb000 (pgoffset 32763)
[   308.885] (II) intel(0): xf86BindGARTMemory: bind key 14 at 0x07fff000 (pgoffset 32767)
[   308.885] (II) intel(0): Fixed memory allocation layout:
[   308.885] (II) intel(0): 0x007df000:            end of stolen memory
[   308.885] (II) intel(0): 0x007df000-0x07ff4fff: DRI memory manager (122968 kB)
[   308.885] (II) intel(0): 0x07ff5000-0x07ff5fff: Core cursor (4 kB, 0x000000003b4c0000 physical
)
[   308.885] (II) intel(0): 0x07ff6000-0x07ff9fff: ARGB cursor (16 kB, 0x000000003920c000 physical
)
[   308.885] (II) intel(0): 0x07ffa000-0x07ffafff: Core cursor (4 kB, 0x000000003ab99000 physical
)
[   308.885] (II) intel(0): 0x07ffb000-0x07ffefff: ARGB cursor (16 kB, 0x00000000394e2000 physical
)
[   308.885] (II) intel(0): 0x07fff000-0x07ffffff: overlay registers (4 kB, 0x000000003b988000 physical
)
[   308.885] (II) intel(0): 0x08000000:            end of aperture
[   308.885] (II) intel(0): BO memory allocation layout:
[   308.885] (II) intel(0): 0x007df000:            start of memory manager
[   308.885] (II) intel(0): 0x07ff5000:            end of memory manager
[   309.120] is lvds
[   309.120] (II) intel(0): using SSC reference clock of 66 MHz
[   309.122] (WW) intel(0): Chosen PLL clock of 66.5 Mhz more than 2% away from desired 65.0 Mhz
[   309.122] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[   309.560] (II) intel(0): Output configuration:
[   309.560] (II) intel(0):   Pipe A is off
[   309.560] (II) intel(0):   Display plane A is now disabled and connected to pipe A.
[   309.560] (WW) intel(0):   Hardware claims pipe A is on while software believes it is off
[   309.560] (II) intel(0):   Pipe B is on
[   309.560] (II) intel(0):   Display plane B is now enabled and connected to pipe B.
[   309.560] (II) intel(0):   Output VGA is connected to pipe none
[   309.560] (II) intel(0):   Output LVDS is connected to pipe B
[   309.600] is crt
[   309.820] (II) intel(0): I2C bus "CRTDDC_A" initialized.
[   309.821] (II) intel(0): I2C bus "CRTDDC_A" removed.
[   312.504] (II) UnloadModule: "kbd"
[   312.505] (II) UnloadModule: "synaptics"
[   312.540] (II) UnloadModule: "ws"
[   313.607] (II) intel(0): xf86UnbindGARTMemory: unbind key 10
[   313.607] (II) intel(0): xf86UnbindGARTMemory: unbind key 11
[   313.607] (II) intel(0): xf86UnbindGARTMemory: unbind key 12
[   313.607] (II) intel(0): xf86UnbindGARTMemory: unbind key 13
[   313.607] (II) intel(0): xf86UnbindGARTMemory: unbind key 14
[   313.636] (WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 10 failed
        (Bad address)
[   313.636] (WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 11 failed
        (Bad address)
[   313.636] (WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 12 failed
        (Bad address)
[   313.636] (WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 13 failed
        (Bad address)
[   313.636] (WW) intel(0): xf86DeAllocateGARTMemory: deallocation gart memory with key 14 failed
        (Bad address)
[   313.641] Server terminated successfully (0). Closing log file.
 

startx-1.log:
-------------

xauth: (stdin):1:  bad display name "mc.amt.ru:1" in "add" command
X.Org X Server 1.12.2
Release Date: 2012-05-29
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 5.2 i386
Current Operating System: OpenBSD mc.amt.ru 5.2 GENERIC#278 i386
Build Date: 22 July 2012  10:21:16PM
Current version of pixman: 0.24.4
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Sun Dec  2 19:58:06 2012
(==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
Segmentation fault at address 0x5100
Fatal server error:
Caught signal 11 (Segmentation fault). Server aborting
Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
Please also check the log file at "/var/log/Xorg.1.log" for additional information.
Server terminated with error (1). Closing log file.
xinit: giving up
xinit: unable to connect to X server: Connection refused
xinit: server error
xauth: (argv):1:  bad display name "mc.amt.ru:1" in "remove" command

Xorg.1.log:
-----------

[   278.678] (WW) checkDevMem: failed to open /dev/xf86 and /dev/mem
        (Operation not permitted)
        Check that you have set 'machdep.allowaperture=1'
        in /etc/sysctl.conf and reboot your machine
        refer to xf86(4) for details
[   278.678] linear framebuffer access unavailable
[   278.689] (--) Using wscons driver on /dev/ttyC3 in pcvt compatibility mode (version 3.32)
[   279.704]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[   279.704] X Protocol Version 11, Revision 0
[   279.704] Build Operating System: OpenBSD 5.2 i386
[   279.704] Current Operating System: OpenBSD mc.amt.ru 5.2 GENERIC#278 i386
[   279.704] Build Date: 22 July 2012  10:21:16PM
[   279.704]  
[   279.704] Current version of pixman: 0.24.4
[   279.704] Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[   279.704] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[   279.704] (==) Log file: "/var/log/Xorg.1.log", Time: Sun Dec  2 19:58:06 2012
[   279.705] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[   279.705] (==) No Layout section.  Using the first Screen section.
[   279.705] (==) No screen section available. Using defaults.
[   279.705] (**) |-->Screen "Default Screen Section" (0)
[   279.705] (**) |   |-->Monitor "<default monitor>"
[   279.705] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[   279.705] (==) Disabling SIGIO handlers for input devices
[   279.705] (==) Automatically adding devices
[   279.705] (==) Automatically enabling devices
[   279.705] (==) FontPath set to:
        /usr/X11R6/lib/X11/fonts/misc/,
        /usr/X11R6/lib/X11/fonts/TTF/,
        /usr/X11R6/lib/X11/fonts/OTF/,
        /usr/X11R6/lib/X11/fonts/Type1/,
        /usr/X11R6/lib/X11/fonts/100dpi/,
        /usr/X11R6/lib/X11/fonts/75dpi/
[   279.705] (==) ModulePath set to "/usr/X11R6/lib/modules"
[   279.706] (II) The server relies on wscons to provide the list of input devices.
        If no devices become available, reconfigure wscons or disable AutoAddDevices.
[   279.706] (II) Loader magic: 0x3c021020
[   279.706] (II) Module ABI versions:
[   279.706] X.Org ANSI C Emulation: 0.4
[   279.706] X.Org Video Driver: 12.0
[   279.706] X.Org XInput driver : 16.0
[   279.706] X.Org Server Extension : 6.0
[   279.706] (--) PCI:*(0:0:2:0) 8086:3582:1014:0557 rev 2, Mem @ 0xe0000000/134217728, 0xd0000000/524288, I/O @ 0x00001800/8
[   279.706] (--) PCI: (0:0:2:1) 8086:3582:1014:0557 rev 2, Mem @ 0xe8000000/134217728, 0xd0080000/524288
[   279.706] (II) LoadModule: "extmod"
[   279.707] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[   279.707] (II) Module extmod: vendor="X.Org Foundation"
[   279.707] compiled for 1.12.2, module version = 1.0.0
[   279.707] Module class: X.Org Server Extension
[   279.707] ABI class: X.Org Server Extension, version 6.0
[   279.707] (II) Loading extension MIT-SCREEN-SAVER
[   279.707] (II) Loading extension XFree86-VidModeExtension
[   279.707] (II) Loading extension XFree86-DGA
[   279.707] (II) Loading extension DPMS
[   279.707] (II) Loading extension XVideo
[   279.707] (II) Loading extension XVideo-MotionCompensation
[   279.707] (II) Loading extension X-Resource
[   279.707] (II) LoadModule: "dbe"
[   279.708] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[   279.708] (II) Module dbe: vendor="X.Org Foundation"
[   279.708] compiled for 1.12.2, module version = 1.0.0
[   279.708] Module class: X.Org Server Extension
[   279.708] ABI class: X.Org Server Extension, version 6.0
[   279.708] (II) Loading extension DOUBLE-BUFFER
[   279.708] (II) LoadModule: "glx"
[   279.709] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[   279.709] (II) Module glx: vendor="X.Org Foundation"
[   279.709] compiled for 1.12.2, module version = 1.0.0
[   279.709] ABI class: X.Org Server Extension, version 6.0
[   279.710] (==) AIGLX enabled
[   279.710] (II) Loading extension GLX
[   279.710] (II) LoadModule: "record"
[   279.710] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[   279.711] (II) Module record: vendor="X.Org Foundation"
[   279.711] compiled for 1.12.2, module version = 1.13.0
[   279.711] Module class: X.Org Server Extension
[   279.711] ABI class: X.Org Server Extension, version 6.0
[   279.711] (II) Loading extension RECORD
[   279.711] (II) LoadModule: "dri"
[   279.711] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[   279.712] (II) Module dri: vendor="X.Org Foundation"
[   279.712] compiled for 1.12.2, module version = 1.0.0
[   279.712] ABI class: X.Org Server Extension, version 6.0
[   279.712] (II) Loading extension XFree86-DRI
[   279.712] (II) LoadModule: "dri2"
[   279.713] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[   279.713] (II) Module dri2: vendor="X.Org Foundation"
[   279.713] compiled for 1.12.2, module version = 1.2.0
[   279.713] ABI class: X.Org Server Extension, version 6.0
[   279.713] (II) Loading extension DRI2
[   279.713] (==) Matched intel as autoconfigured driver 0
[   279.713] (==) Matched vesa as autoconfigured driver 1
[   279.713] (==) Assigned the driver to the xf86ConfigLayout
[   279.713] (II) LoadModule: "intel"
[   279.713] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[   279.715] (II) Module intel: vendor="X.Org Foundation"
[   279.715] compiled for 1.12.2, module version = 2.12.0
[   279.715] Module class: X.Org Video Driver
[   279.715] ABI class: X.Org Video Driver, version 12.0
[   279.715] (II) LoadModule: "vesa"
[   279.716] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[   279.716] (II) Module vesa: vendor="X.Org Foundation"
[   279.716] compiled for 1.12.2, module version = 2.3.1
[   279.716] Module class: X.Org Video Driver
[   279.716] ABI class: X.Org Video Driver, version 12.0
[   279.716] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
        965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
        4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
        Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
        Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
        Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
        Sandybridge Server
[   279.716] (II) VESA: driver for VESA chipsets: vesa
[   279.716] (WW) Falling back to old probe method for vesa
[   279.716] (II) Loading sub module "vgahw"
[   279.716] (II) LoadModule: "vgahw"
[   279.718] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
[   279.718] (II) Module vgahw: vendor="X.Org Foundation"
[   279.718] compiled for 1.12.2, module version = 0.1.0
[   279.718] ABI class: X.Org Video Driver, version 12.0
[   279.718] (II) Loading sub module "ramdac"
[   279.718] (II) LoadModule: "ramdac"
[   279.718] (II) Module "ramdac" already built-in
[   279.718] drmOpenDevice: node name is /dev/drm0
[   279.718] drmOpenDevice: open result is 9, (OK)
[   279.718] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[   279.718] drmOpenDevice: node name is /dev/drm0
[   279.718] drmOpenDevice: open result is 9, (OK)
[   279.718] drmOpenByBusid: drmOpenMinor returns 9
[   279.719] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[   279.719] (EE) intel(0): [drm] failed to set drm interface version.
[   279.719] (EE) intel(0): Failed to become DRM master.
[   279.719] (II) intel(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[   279.719] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[   279.719] (==) intel(0): RGB weight 888
[   279.719] (==) intel(0): Default visual is TrueColor
[   279.719] (II) intel(0): Integrated Graphics Chipset: Intel(R) 852GM/855GM
[   279.719] (--) intel(0): Chipset: "852GM/855GM"
[   279.719] (--) intel(0): Linear framebuffer at 0xE0000000
[   279.719] (--) intel(0): IO registers at addr 0xD0000000 size 524288
[   279.719] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[   279.719] (WW) intel(0): libpciaccess failed to read 64kB video BIOS: Unknown error: -78
[   279.719] (WW) intel(0): VBIOS initialization failed.
[   279.719] (EE) intel(0): Unable to map mmio range. Bad file descriptor (9)
[   279.719] (II) intel(0): 2 display pipes available.
[   279.719] (II) Loading sub module "ddc"
[   279.719] (II) LoadModule: "ddc"
[   279.719] (II) Module "ddc" already built-in
[   279.719] (II) Loading sub module "i2c"
[   279.719] (II) LoadModule: "i2c"
[   279.719] (II) Module "i2c" already built-in
[   279.719] (II) intel(0): Output VGA has no monitor section
[   279.720] Segmentation fault at address 0x5100
[   279.720]
Fatal server error:
[   279.720] Caught signal 11 (Segmentation fault). Server aborting
[   279.720]
[   279.720]
Please consult the The X.Org Foundation support
         at http://wiki.x.org
 for help.
[   279.720] Please also check the log file at "/var/log/Xorg.1.log" for additional information.
[   279.720]
[   279.720] Server terminated with error (1). Closing log file.

Reply | Threaded
Open this post in threaded view
|

Re: several X servers on one host

Matthieu Herrb-5
On Sun, Dec 02, 2012 at 08:18:54PM +0400, Alexei Malinin wrote:

> Hello.
>
> Recently I tried to run two X servers on i386 OpenBSD-5.2:
>
> ttyC2$ startx -- :0    OK
> ttyC3$ startx -- :1    but this server was aborted due to segmentation fault
>
> I succesfully ran two X servers on previous versions of i386 OpenBSD and
> linux
> without problems.
>
> Please tell me what I'm doing wrong?
>

hmm

Since a long time, you need to run at securelevel -1 to be able to run
2 X servers at the same time. This is why this is not tested very
often...

I just fixed the issue that makes the server segfault when it fails to
mmap the MMIO region in the intel driver, but there are still other
issues. Among them is probably the fact that the intel driver requires
drm(4) to work, and I'm not sure if the latter can handle 2 X servers.
--
Matthieu Herrb

Reply | Threaded
Open this post in threaded view
|

Re: several X servers on one host

Alexei Malinin
On 12/02/12 22:03, Matthieu Herrb wrote:

> On Sun, Dec 02, 2012 at 08:18:54PM +0400, Alexei Malinin wrote:
>> Hello.
>>
>> Recently I tried to run two X servers on i386 OpenBSD-5.2:
>>
>> ttyC2$ startx -- :0    OK
>> ttyC3$ startx -- :1    but this server was aborted due to segmentation fault
>>
>> I succesfully ran two X servers on previous versions of i386 OpenBSD and
>> linux
>> without problems.
>>
>> Please tell me what I'm doing wrong?
>
> hmm
>
> Since a long time, you need to run at securelevel -1 to be able to run
> 2 X servers at the same time. This is why this is not tested very
> often...

Indeed, I ran two X servers at the same time a long time ago.
But from time to time I have a need to do so
(that is, to run one more X session on behalf of another person,
without destroyingmy active X session)...

> I just fixed the issue that makes the server segfault when it fails to
> mmap the MMIO region in the intel driver, but there are still other
> issues. Among them is probably the fact that the intel driver requires
> drm(4) to work, and I'm not sure if the latter can handle 2 X servers.

But what can you say about radeon driver?


--
Alexei Malinin

Reply | Threaded
Open this post in threaded view
|

Re: several X servers on one host

Laurence Tratt
On Sun, Dec 02, 2012 at 11:53:44PM +0400, Alexei Malinin wrote:

> Indeed, I ran two X servers at the same time a long time ago.
> But from time to time I have a need to do so (that is, to run one more X
> session on behalf of another person, without destroyingmy active X
> session)...

I sometimes have to do this too, and similarly realised that running two X
servers on the same machine was rather difficult to get working. Based on a
program called xsandbox, I created a little script xcage:

  http://tratt.net/laurie/src/xcage/

Nested X sessions can be a little buggy -- at least on the machines I've used
them on -- but they're often better than the alternatives (e.g. VNC to
localhost).


Laurie
--
Personal                                             http://tratt.net/laurie/
The Converge programming language                      http://convergepl.org/
   https://github.com/ltratt              http://twitter.com/laurencetratt

Reply | Threaded
Open this post in threaded view
|

Re: several X servers on one host

Alexei Malinin
On 12/03/12 16:29, Laurence Tratt wrote:

> On Sun, Dec 02, 2012 at 11:53:44PM +0400, Alexei Malinin wrote:
>
>> Indeed, I ran two X servers at the same time a long time ago.
>> But from time to time I have a need to do so (that is, to run one more X
>> session on behalf of another person, without destroyingmy active X
>> session)...
>
> I sometimes have to do this too, and similarly realised that running two X
> servers on the same machine was rather difficult to get working. Based on a
> program called xsandbox, I created a little script xcage:
>
>   http://tratt.net/laurie/src/xcage/
>
> Nested X sessions can be a little buggy -- at least on the machines I've used
> them on -- but they're often better than the alternatives (e.g. VNC to
> localhost).

Nested X sessions via Xnest or Xephyr are useful
(but only for single man working on the computer)
but they are not of full value (not complete) as startx/xinit sessions
(i. e. several men cannot work simultaneously on the computer).


PS. According to Wikipedia UNIX is a multitasking, _multiuser_
computer operating system, so it turns out that the loss of ability
to run multiple startx/xinit sessions is equivalent to the loss
of the essential UNIX feature- _multiuser_ support:(


--
Alexei Malinin

Reply | Threaded
Open this post in threaded view
|

Re: several X servers on one host

Theo de Raadt
> PS. According to Wikipedia UNIX is a multitasking, _multiuser_
> computer operating system, so it turns out that the loss of ability
> to run multiple startx/xinit sessions is equivalent to the loss
> of the essential UNIX feature- _multiuser_ support:(

You have this very wrong.

The problem is that step-by-step over the last 20 years, X itself
became less and less of a multiuser environment.

This happened when direct hardware device handling was added to X, a
userland program, to support the retarded PC platform.

Safety issues were ignored.  Multiuser was ignored, too.

Reply | Threaded
Open this post in threaded view
|

Re: several X servers on one host

Alexei Malinin
On 12/03/12 20:56, Theo de Raadt wrote:

>> PS. According to Wikipedia UNIX is a multitasking, _multiuser_
>> computer operating system, so it turns out that the loss of ability
>> to run multiple startx/xinit sessions is equivalent to the loss
>> of the essential UNIX feature- _multiuser_ support:(
>
> You have this very wrong.
>
> The problem is that step-by-step over the last 20 years, X itself
> became less and less of a multiuser environment.
>
> This happened when direct hardware device handling was added to X, a
> userland program, to support the retarded PC platform.
>
> Safety issues were ignored.  Multiuser was ignored, too.

You are as always accurate, Theo.

I apologize... but it is very hard to imagine a modern UNIX without X.


PS. X Windows System... X Window_s_ System?.. :(


--
Alexei Malinin