seamonkey error

classic Classic list List threaded Threaded
10 messages Options
Reply | Threaded
Open this post in threaded view
|

seamonkey error

Eivind Eide-2
Which mailinglist are the correct one for errors with ports BTW?

I had a problem with seamonkey over several snapshots now; it won't
start. I've tried everything I can think of tracking it down. I would
appreciate some pointers. It's seamonkey-2.33.1 on i386 and this is
the error message it throws when I try to start it:

XPCOMGlueLoad error for file
/usr/local/lib/seamonkey-2.33.1/../../ldap/sdks/c-sdk/ldap/libraries/libldap/libldap60.so.41.0:
File not found
Couldn't load XPCOM.

If anybody have some ideas I'm very grateful.

dmesg:

OpenBSD 5.7-current (GENERIC) #759: Wed Apr  1 14:25:18 MDT 2015
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 Mobile CPU 1.80GHz ("GenuineIntel"
686-class) 1.80 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PERF
real mem  = 2146852864 (2047MB)
avail mem = 2099503104 (2002MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 05/15/03, BIOS32 rev. 0 @ 0xffe90, SMBIOS rev.
2.3 @ 0xf7690 (61 entries)
bios0: vendor Dell Computer Corporation version "A09" date 05/15/2003
bios0: Dell Computer Corporation Latitude C640
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP
acpi0: wakeup devices LID_(S3) PBTN(S4) PCI0(S3) UAR1(S3) USB0(S1)
USB1(S1) USB2(S1) MODM(S3) PCIE(S3) MPCI(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (PCIE)
acpiprt3 at acpi0: bus -1 (MPCI)
acpicpu0 at acpi0acpicpu0: struck PSS entry, core frequency equals  last
acpicpu0: struck PSS entry, core frequency equals  last
acpicpu0: invalid _PSS length
: C2
acpipwrres0 at acpi0: PADA, resource for ADPT
acpitz0 at acpi0: critical temperature is 99 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "LIP8120DLP" serial 5184 type LION oem
"Sony Corp."
acpibat1 at acpi0: BAT1 not present
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpidock0 at acpi0: GDCK not docked (0)
acpivideo0 at acpi0: VID_
bios0: ROM list: 0xc0000/0xf000 0xcf000/0x800! 0xcf800/0x800!
cpu0 at mainbus0: (uniprocessor)
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845 Host" rev 0x04
intelagp0 at pchb0
agp0 at intelagp0: aperture at 0xe8000000, size 0x4000000
ppb0 at pci0 dev 1 function 0 "Intel 82845 AGP" rev 0x04
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility M7" rev 0x00
drm0 at radeondrm0
radeondrm0: irq 11
uhci0 at pci0 dev 29 function 0 "Intel 82801CA/CAM USB" rev 0x02: irq 11
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0x42
pci2 at ppb1 bus 2
xl0 at pci2 dev 0 function 0 "3Com 3c905C 100Base-TX" rev 0x78: irq
11, address 00:08:74:48:40:d6
exphy0 at xl0 phy 24: 3Com internal media interface
cbb0 at pci2 dev 1 function 0 "TI PCI1420 CardBus" rev 0x00: irq 11
cbb1 at pci2 dev 1 function 1 "TI PCI1420 CardBus" rev 0x00: irq 11
ath0 at pci2 dev 3 function 0 "Atheros AR2413" rev 0x01: irq 11
ath0: AR2413 7.8 phy 4.5 rf 5.6 eeprom 5.2, WOR3W, address 00:16:cf:53:07:71
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
cardslot1 at cbb1 slot 1 flags 0
cardbus1 at cardslot1: bus 5 device 0 cacheline 0x8, lattimer 0x20
pcmcia1 at cardslot1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801CAM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801CAM IDE" rev 0x02: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <Hitachi HTS541080G9AT00>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <TOSHIBA, DVD-ROM SD-C2612, 1D21> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801CA/CAM AC97" rev 0x02:
irq 11, ICH3 AC97
ac97: codec id 0x4352595b (Cirrus Logic CS4205 rev 3)
ac97: codec features mic channel, tone, simulated stereo, bass boost,
20 bit DAC, 18 bit ADC, SRS 3D
audio0 at auich0
"Intel 82801CA/CAM Modem" rev 0x02 at pci0 dev 31 function 6 not configured
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics touchpad, firmware 5.9
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd0 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 005> SCSI2 0/direct fixed
sd0: 73241MB, 512 bytes/sector, 149998377 sectors
root on sd0a (b7aac228eb17d109.a) swap on sd0b dump on sd0b
radeondrm0: 1400x1050
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)


--



Eivind Eide

"ONLY THOSE WHO ATTEMPT THE IMPOSSIBLE WILL ACHIEVE THE ABSURD"
- Oceania Association of Autonomous Astronauts

Reply | Threaded
Open this post in threaded view
|

Re: seamonkey error

acampbell
On 02 Apr 2015, Eivind Eide wrote:

> Which mailinglist are the correct one for errors with ports BTW?
>
> I had a problem with seamonkey over several snapshots now; it won't
> start. I've tried everything I can think of tracking it down. I would
> appreciate some pointers. It's seamonkey-2.33.1 on i386 and this is
> the error message it throws when I try to start it:
>
> XPCOMGlueLoad error for file
> /usr/local/lib/seamonkey-2.33.1/../../ldap/sdks/c-sdk/ldap/libraries/libldap/libldap60.so.41.0:
> File not found
> Couldn't load XPCOM.

[snip]


I have the same problem on two different machines (i386 and amd64). Now
when I try to (re)install seamonkey it fails owing to library problems so I
assume this is the explanation:


quirks-2.58 signed on 2015-03-31T08:08:55Z
Can't install seamonkey-2.33.1 because of libraries
|library atk-1.0.21609.1 not found
| /usr/local/lib/libatk-1.0.so.21409.1 (atk-2.14.0): bad major
|library gio-2.0.4200.1 not found
| /usr/local/lib/libgio-2.0.so.4200.0 (glib2-2.42.2p0): minor is too small
|library glib-2.0.4200.1 not found
| /usr/local/lib/libglib-2.0.so.4200.0 (glib2-2.42.2p0): minor is too small
|library gobject-2.0.4200.1 not found
| /usr/local/lib/libgobject-2.0.so.4200.0 (glib2-2.42.2p0): minor is too small
|library gthread-2.0.4200.1 not found



--
Anthony Campbell http://www.acampbell.uk

Reply | Threaded
Open this post in threaded view
|

Re: seamonkey error

Mihai Popescu-3
In reply to this post by Eivind Eide-2
> I have the same problem on two different machines (i386 and amd64). Now
> when I try to (re)install seamonkey it fails owing to library problems so I
> assume this is the explanation:


> quirks-2.58 signed on 2015-03-31T08:08:55Z
> Can't install seamonkey-2.33.1 because of libraries
> |library atk-1.0.21609.1 not found
> | /usr/local/lib/libatk-1.0.so.21409.1 (atk-2.14.0): bad major
> |library gio-2.0.4200.1 not found
> | /usr/local/lib/libgio-2.0.so.4200.0 (glib2-2.42.2p0): minor is too small
> |library glib-2.0.4200.1 not found
> | /usr/local/lib/libglib-2.0.so.4200.0 (glib2-2.42.2p0): minor is too small
> |library gobject-2.0.4200.1 not found
> | /usr/local/lib/libgobject-2.0.so.4200.0 (glib2-2.42.2p0): minor is too small
> |library gthread-2.0.4200.1 not found

You can't just "reinstall" like in Windows or Linux. Do not assume!
You have mixed things, that is way you get errors. Stay with the
proven methods and don't move to the alternative ways of doing things.

Now, the base system must go hand in hand with packages. You broke
that handshake. The FAQ has a way explaining how not to do it.

Reply | Threaded
Open this post in threaded view
|

Re: seamonkey error

acampbell
On 03 Apr 2015, Mihai Popescu wrote:

> > I have the same problem on two different machines (i386 and amd64). Now
> > when I try to (re)install seamonkey it fails owing to library problems so I
> > assume this is the explanation:
>
>
> > quirks-2.58 signed on 2015-03-31T08:08:55Z
> > Can't install seamonkey-2.33.1 because of libraries
> > |library atk-1.0.21609.1 not found
> > | /usr/local/lib/libatk-1.0.so.21409.1 (atk-2.14.0): bad major
> > |library gio-2.0.4200.1 not found
> > | /usr/local/lib/libgio-2.0.so.4200.0 (glib2-2.42.2p0): minor is too small
> > |library glib-2.0.4200.1 not found
> > | /usr/local/lib/libglib-2.0.so.4200.0 (glib2-2.42.2p0): minor is too small
> > |library gobject-2.0.4200.1 not found
> > | /usr/local/lib/libgobject-2.0.so.4200.0 (glib2-2.42.2p0): minor is too small
> > |library gthread-2.0.4200.1 not found
>
> You can't just "reinstall" like in Windows or Linux. Do not assume!
> You have mixed things, that is way you get errors. Stay with the
> proven methods and don't move to the alternative ways of doing things.
>
> Now, the base system must go hand in hand with packages. You broke
> that handshake. The FAQ has a way explaining how not to do it.

Sorry if I wasn't clear. I didn't mean that I used a linux method; I
used the "proven methods" for upgrading -current and packages - twice
with different snapshots. I've just done it a third time but seamonkey
still gives the same error as reported by the OP although it seems to
install correctly.

dmesg:

OpenBSD 5.7-current (GENERIC.MP) #903: Thu Apr  2 13:47:34 MDT 2015
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1055719424 (1006MB)
avail mem = 1019920384 (972MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe0010 (68 entries)
bios0: vendor LENOVO version "7FET91WW (2.09 )" date 11/01/2006
bios0: LENOVO 9450HAG
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT ECDT TCPA APIC MCFG HPET SLIC BOOT SSDT SSDT SSDT SSDT
acpi0: wakeup devices LID_(S3) SLPB(S3) UART(S3) EXP0(S4) EXP1(S4) EXP2(S4) EXP3(S4) PCI1(S4) USB0(S3) USB1(S3) USB3(S3) USB7(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpiec0 at acpi0
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 1995.29 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu0: 4MB 64b/line 16-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 166MHz
cpu0: mwait min=64, max=64, C-substates=0.2.2.2.2, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU T7200 @ 2.00GHz, 1995.00 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,NXE,LONG,LAHF,PERF
cpu1: 4MB 64b/line 16-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 2, remapped to apid 1
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 2 (EXP0)
acpiprt3 at acpi0: bus 3 (EXP1)
acpiprt4 at acpi0: bus 4 (EXP2)
acpiprt5 at acpi0: bus 12 (EXP3)
acpiprt6 at acpi0: bus 21 (PCI1)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PUBS, resource for USB0, USB7
acpitz0 at acpi0: critical temperature is 127 degC
acpitz1 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "92P1127" serial 14319 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
cpu0: Enhanced SpeedStep 1995 MHz: speeds: 2000, 1667, 1333, 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: msi
pci1 at ppb0 bus 1
radeondrm0 at pci1 dev 0 function 0 "ATI Radeon Mobility X1400" rev 0x00
drm0 at radeondrm0
radeondrm0: apic 1 int 16
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02: msi
azalia0: codecs: Analog Devices AD1981HD, Conexant/0x2bfa, using Analog Devices AD1981HD
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02: msi
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5752M" rev 0x02, BCM5752 A2 (0x6002): msi, address 00:16:36:ca:5d:9c
brgphy0 at bge0 phy 1: BCM5752 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x02: msi
pci3 at ppb2 bus 3
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: msi, MoW2, address 00:19:d2:0b:08:78
ppb3 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02: msi
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x02: msi
pci5 at ppb4 bus 12
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1 int 16
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1 int 17
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1 int 19
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1 int 19
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci6 at ppb5 bus 21
cbb0 at pci6 dev 0 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1 int 16
"TI PCIXX12 FireWire" rev 0x00 at pci6 dev 0 function 1 not configured
"TI PCIXX12 Multimedia Card Reader" rev 0x00 at pci6 dev 0 function 2 not configured
sdhc0 at pci6 dev 0 function 3 "TI PCIXX12 SD" rev 0x00: apic 1 int 16
sdmmc0 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 22 device 0 cacheline 0x8, lattimer 0xb0
pcmcia0 at cardslot0
pcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVDRAM GMA-4082N, CX08> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: msi, AHCI 1.1
ahci0: port 0: 1.5Gb/s
scsibus2 at ahci0: 32 targets
sd0 at scsibus2 targ 0 lun 0: <ATA, TOSHIBA MK1234GS, AH00> SCSI3 0/direct fixed t10.ATA_TOSHIBA_MK1234GSX_17I7T1NFT
sd0: 114473MB, 512 bytes/sector, 234441648 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x02: apic 1 int 23
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
uhub5 at uhub0 port 5 "Standard Microsystems product 0x2502" rev 2.00/0.00 addr 2
ugen0 at uhub5 port 2 "Microdia / Sonix Technology Co., Ltd. USB20 Camera" rev 2.00/1.00 addr 3
ugen1 at uhub3 port 2 "STMicroelectronics Biometric Coprocessor" rev 1.00/0.01 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (4e634c8586d7ee40.a) swap on sd0b dump on sd0b
radeondrm0: 1680x1050
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)


pkg_info -d seamonkey:

Information for inst:seamonkey-2.33.1
Description:
Web-browser, advanced e-mail and newsgroup client, IRC chat client,
and HTML editing made simple -- all your Internet needs in one
application.
Maintainer: Landry Breuil <[hidden email]>
WWW: http://www.seamonkey-project.org/

As I said previously, the same error occurs with both i386 and amd64.

--
Anthony Campbell http://www.acampbell.uk

Reply | Threaded
Open this post in threaded view
|

Re: seamonkey error

Stuart Henderson
On 2015-04-03, Anthony Campbell <[hidden email]> wrote:
>
> Sorry if I wasn't clear. I didn't mean that I used a linux method; I
> used the "proven methods" for upgrading -current and packages - twice
> with different snapshots. I've just done it a third time but seamonkey
> still gives the same error as reported by the OP although it seems to
> install correctly.

Can you expand on "the proven methods"?

What exactly are you typing? What mirror URL are you using (either    
set in PKG_PATH or in /etc/pkg.conf)?

Reply | Threaded
Open this post in threaded view
|

Re: seamonkey error

Eivind Eide-2
In reply to this post by Eivind Eide-2
Sorry. I didn't elaborate enough.

export PKG_PATH="http://ftp.openbsd.org/pub/OpenBSD/snapshots/packages/i386/"

1.

pkg_delete -iv seamonkey

pkg_add -iv seamonkey

result:

seamonkey
XPCOMGlueLoad error for file
/usr/local/lib/seamonkey-2.33.1/../../ldap/sdks/c-sdk/ldap/libraries/libldap/libldap60.so.41.0:
File not found
Couldn't load XPCOM.

2.

pkg_delete -iv seamonkey

cd /usr/ports/
sudo cvs -qd '[hidden email]:/cvs' up -Pd
cd /usr/ports/www/seamonkey/
make clean && make
  ...completes...
make install

result:

  ...snip...
/usr/ports/pobj/seamonkey-2.33.1/bin/install -c  -m 644
/usr/ports/pobj/seamonkey-2.33.1/fake-i386/usr/local/lib/seamonkey-2.33.1/chrome/icons/default/seamonkey.png
 /usr/ports/pobj/seamonkey-2.33.1/fake-i386/usr/local/share/pixmaps/seamonkey.png
Installing /usr/ports/www/seamonkey/pkg/README-main as
/usr/ports/pobj/seamonkey-2.33.1/fake-i386/usr/local/share/doc/pkg-readmes/seamonkey-2.33.1
===>  Building package for seamonkey-2.33.1
Create /usr/ports/packages/i386/all/seamonkey-2.33.1.tgz
Error: Libraries in packing-lists in the ports tree
       and libraries from installed packages don't match
--- /tmp/dep_cache.LACKe6kIT/portstree-seamonkey-2.33.1 Mon Mar 30 10:51:49 2015
+++ /tmp/dep_cache.LACKe6kIT/inst-seamonkey-2.33.1 Mon Mar 30 10:51:49 2015
@@ -5,16 +5,16 @@
 -W Xext.13.0
 -W Xrender.6.0
 -W Xt.11.0
--W atk-1.0.21609.1
+-W atk-1.0.21409.1
 -W c.78.1
 -W cairo.12.3
 -W fontconfig.9.1
 -W freetype.23.0
 -W gdk_pixbuf-2.0.3000.0
--W gio-2.0.4200.1
--W glib-2.0.4200.1
--W gobject-2.0.4200.1
--W gthread-2.0.4200.1
+-W gio-2.0.4200.0
+-W glib-2.0.4200.0
+-W gobject-2.0.4200.0
+-W gthread-2.0.4200.0
 -W m.9.0
 -W nspr4.23.1
 -W nss3.36.0
*** Error 1 in . (/usr/ports/infrastructure/mk/bsd.port.mk:3225 'wantlib-args')
*** Error 1 in . (/usr/ports/infrastructure/mk/bsd.port.mk:1944
'/usr/ports/packages/i386/all/seamonkey-2.33.1.tgz')
*** Error 1 in . (/usr/ports/infrastructure/mk/bsd.port.mk:2493
'_internal-package')
*** Error 1 in . (/usr/ports/infrastructure/mk/bsd.port.mk:2473 'package')
*** Error 1 in . (/usr/ports/infrastructure/mk/bsd.port.mk:1957
'/var/db/pkg/seamonkey-2.33.1/+CONTENTS')
*** Error 1 in /usr/ports/www/seamonkey
(/usr/ports/infrastructure/mk/bsd.port.mk:2473 'install')


This is more or less the result with the last 3 snapshots or so....


--



Eivind Eide

"ONLY THOSE WHO ATTEMPT THE IMPOSSIBLE WILL ACHIEVE THE ABSURD"
- Oceania Association of Autonomous Astronauts

Reply | Threaded
Open this post in threaded view
|

Re: seamonkey error

acampbell
In reply to this post by Stuart Henderson
On 04 Apr 2015, Stuart Henderson wrote:

> On 2015-04-03, Anthony Campbell <[hidden email]> wrote:
> >
> > Sorry if I wasn't clear. I didn't mean that I used a linux method; I
> > used the "proven methods" for upgrading -current and packages - twice
> > with different snapshots. I've just done it a third time but seamonkey
> > still gives the same error as reported by the OP although it seems to
> > install correctly.
>
> Can you expand on "the proven methods"?
>
> What exactly are you typing? What mirror URL are you using (either    
> set in PKG_PATH or in /etc/pkg.conf)?


Install the latest snapshot after grabbing bsd.rd and SHA256.sig (verify with
signify). Reboot, run upgrade. Once this is complete, run sysmerge. Then do
"pkg_update -ui". I've done this at least half a dozen times without problems
apart from one or two library mismatches that were solved by later upgrades.

PKG_PATH=ftp://mirrorservice.org/pub/OpenBSD/snapshots/packages/amd64/`machine -a`/


--
Anthony Campbell http://www.acampbell.uk

Reply | Threaded
Open this post in threaded view
|

Re: seamonkey error

Eivind Eide-2
In reply to this post by Eivind Eide-2
On 04 Apr 2015, Anthony Campbell wrote:
> Install the latest snapshot after grabbing bsd.rd and SHA256.sig (verify with
> signify). Reboot, run upgrade. Once this is complete, run sysmerge. Then do
> "pkg_update -ui". I've done this at least half a dozen times without problems
> apart from one or two library mismatches that were solved by later upgrades.
>
> PKG_PATH=ftp://mirrorservice.org/pub/OpenBSD/snapshots/packages/amd64/`machine -a`/

Yes. As I tried to say, this is exactly what I did the last 3
snapshots or so....
The problem with seamonkey as I've described persists.



--



Eivind Eide

"ONLY THOSE WHO ATTEMPT THE IMPOSSIBLE WILL ACHIEVE THE ABSURD"
- Oceania Association of Autonomous Astronauts

Reply | Threaded
Open this post in threaded view
|

Re: seamonkey error

Stuart Henderson
In reply to this post by acampbell
On 2015-04-04, Anthony Campbell <[hidden email]> wrote:

> On 04 Apr 2015, Stuart Henderson wrote:
>> On 2015-04-03, Anthony Campbell <[hidden email]> wrote:
>> >
>> > Sorry if I wasn't clear. I didn't mean that I used a linux method; I
>> > used the "proven methods" for upgrading -current and packages - twice
>> > with different snapshots. I've just done it a third time but seamonkey
>> > still gives the same error as reported by the OP although it seems to
>> > install correctly.
>>
>> Can you expand on "the proven methods"?
>>
>> What exactly are you typing? What mirror URL are you using (either    
>> set in PKG_PATH or in /etc/pkg.conf)?
>
>
> Install the latest snapshot after grabbing bsd.rd and SHA256.sig (verify with
> signify). Reboot, run upgrade. Once this is complete, run sysmerge. Then do
> "pkg_update -ui". I've done this at least half a dozen times without problems
> apart from one or two library mismatches that were solved by later upgrades.
>
> PKG_PATH=ftp://mirrorservice.org/pub/OpenBSD/snapshots/packages/amd64/`machine -a`/

That should be fine (the case I was wondering about was if you were
trying to do a partial update).

There is sometimes a chance you might hit a mirror mid-update, but that one
looks ok at present..

Reply | Threaded
Open this post in threaded view
|

Re: seamonkey error

Peter Piwowarski
In reply to this post by Eivind Eide-2
Eivind Eide wrote:

> Which mailinglist are the correct one for errors with ports BTW?
>
> I had a problem with seamonkey over several snapshots now; it won't
> start. I've tried everything I can think of tracking it down. I would
> appreciate some pointers. It's seamonkey-2.33.1 on i386 and this is
> the error message it throws when I try to start it:
>
> XPCOMGlueLoad error for file
> /usr/local/lib/seamonkey-2.33.1/../../ldap/sdks/c-sdk/ldap/libraries/libldap/libldap60.so.41.0:
> File not found
> Couldn't load XPCOM.
>
> If anybody have some ideas I'm very grateful.

I can confirm this as well (on amd64), with an identical error message
from seamonkey (and persisting across a nuke-and-pave reinstall from a
fresh snapshot a few weeks or so ago, done for unrelated reasons).