scrotwm hangs X after update to 4.8

classic Classic list List threaded Threaded
12 messages Options
Reply | Threaded
Open this post in threaded view
|

scrotwm hangs X after update to 4.8

Gregory Edigarov-2
Hello,

not sure about fvwm yet, but it seems like scrotwm can't work correctly:

inteldrm0: gpu hung!
no reset function for chipset.
error: [drm:pid8065:inteldrm_lastclose] *ERROR* failed to idle
hardware: 5 error: [drm:pid26694:inteldrm_lastclose] *ERROR* failed to
idle hardware: 5 error: [drm:pid26694:i915_gem_entervt_ioctl] *ERROR*
Reenabling wedged hardware, good luck inteldrm0: gpu hung!
no reset function for chipset.


under fvwm system seems to workOpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem  = 527986688 (503MB)
avail mem = 509390848 (485MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/17/03, BIOS32 rev. 0 @ 0xfdb30, SMBIOS rev. 2.3 @ 0xf0630 (32 entries)
bios0: vendor American Megatrends Inc. version "P2.60" date 12/17/2003
acpi at bios0 function 0x0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
mpbios0: bus 0 is type PCI  
mpbios0: bus 1 is type PCI  
mpbios0: bus 2 is type PCI  
mpbios0: bus 3 is type PCI  
mpbios0: bus 4 is type ISA  
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf79e0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DB LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xb400
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x8000000
inteldrm0 at vga1: apic 2 int 16 (irq 11)
drm0 at inteldrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2 int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: apic 2 int 19 (irq 5)
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: apic 2 int 18 (irq 12)
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int 23 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x82
pci1 at ppb0 bus 3
rl0 at pci1 dev 6 function 0 "Realtek 8139" rev 0x10: apic 2 int 19 (irq 5), address 00:30:4f:23:15:f0
rlphy0 at rl0 phy 0: RTL internal PHY
rl1 at pci1 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int 17 (irq 3), address 00:0b:6a:f8:3e:e3
rlphy1 at rl1 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02: 24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP0411N>
wd0: 16-sector PIO, LBA48, 38204MB, 78242976 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7170A, 1.03> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x02: apic 2 int 17 (irq 3), ICH4 AC97
ac97: codec id 0x434d4961 (C-Media Electronics CMI9739)
audio0 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
lm1 at wbsio0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/11.10 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
inteldrm0: gpu hung!
no reset function for chipset.
error: [drm:pid8065:inteldrm_lastclose] *ERROR* failed to idle hardware: 5
error: [drm:pid26694:inteldrm_lastclose] *ERROR* failed to idle hardware: 5
error: [drm:pid26694:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged hardware, good luck
inteldrm0: gpu hung!
no reset function for chipset.
OpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
real mem  = 527986688 (503MB)
avail mem = 509390848 (485MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 12/17/03, BIOS32 rev. 0 @ 0xfdb30, SMBIOS rev. 2.3 @ 0xf0630 (32 entries)
bios0: vendor American Megatrends Inc. version "P2.60" date 12/17/2003
acpi at bios0 function 0x0 not configured
mpbios0 at bios0: Intel MP Specification 1.4
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
mpbios0: bus 0 is type PCI  
mpbios0: bus 1 is type PCI  
mpbios0: bus 2 is type PCI  
mpbios0: bus 3 is type PCI  
mpbios0: bus 4 is type ISA  
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf79e0/176 (9 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DB LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xb400
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x8000000
inteldrm0 at vga1: apic 2 int 16 (irq 11)
drm0 at inteldrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2 int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x02: apic 2 int 19 (irq 5)
uhci2 at pci0 dev 29 function 2 "Intel 82801DB USB" rev 0x02: apic 2 int 18 (irq 12)
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int 23 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x82
pci1 at ppb0 bus 3
rl0 at pci1 dev 6 function 0 "Realtek 8139" rev 0x10: apic 2 int 19 (irq 5), address 00:30:4f:23:15:f0
rlphy0 at rl0 phy 0: RTL internal PHY
rl1 at pci1 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int 17 (irq 3), address 00:0b:6a:f8:3e:e3
rlphy1 at rl1 phy 0: RTL internal PHY
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x02: 24-bit timer at 3579545Hz
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x02: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
wd0 at pciide0 channel 0 drive 0: <SAMSUNG SP0411N>
wd0: 16-sector PIO, LBA48, 38204MB, 78242976 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW AD-7170A, 1.03> ATAPI 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 4
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x02: apic 2 int 17 (irq 3), ICH4 AC97
ac97: codec id 0x434d4961 (C-Media Electronics CMI9739)
audio0 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
lm1 at wbsio0 port 0x290/8: W83627HF
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/11.10 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
 fine, so I suspect something is broken
in the way scrotwm works.

full dmesg follows:


--
With best regards,
        Gregory Edigarov

Reply | Threaded
Open this post in threaded view
|

Re: scrotwm hangs X after update to 4.8

Gregory Edigarov-2
well, it seems like it was xorg.conf.

after running X -configure and reinstalling the config - problem seems
to have wanished.

will observe the behaviour, though...

On Tue, 2 Nov 2010 17:36:08 +0200
Gregory Edigarov <[hidden email]> wrote:

> Hello,
>
> not sure about fvwm yet, but it seems like scrotwm can't work
> correctly:
>
> inteldrm0: gpu hung!
> no reset function for chipset.
> error: [drm:pid8065:inteldrm_lastclose] *ERROR* failed to idle
> hardware: 5 error: [drm:pid26694:inteldrm_lastclose] *ERROR* failed to
> idle hardware: 5 error: [drm:pid26694:i915_gem_entervt_ioctl] *ERROR*
> Reenabling wedged hardware, good luck inteldrm0: gpu hung!
> no reset function for chipset.
>
>
> under fvwm system seems to workOpenBSD 4.8 (GENERIC) #136: Mon Aug 16
> 09:06:23 MDT 2010
> [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC cpu0:
> Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> real mem  = 527986688 (503MB) avail mem = 509390848 (485MB) mainbus0
> at root bios0 at mainbus0: AT/286+ BIOS, date 12/17/03, BIOS32 rev. 0
> @ 0xfdb30, SMBIOS rev. 2.3 @ 0xf0630 (32 entries) bios0: vendor
> American Megatrends Inc. version "P2.60" date 12/17/2003 acpi at
> bios0 function 0x0 not configured mpbios0 at bios0: Intel MP
> Specification 1.4 cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 99MHz
> mpbios0: bus 0 is type PCI  
> mpbios0: bus 1 is type PCI  
> mpbios0: bus 2 is type PCI  
> mpbios0: bus 3 is type PCI  
> mpbios0: bus 4 is type ISA  
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf79e0/176 (9 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DB LPC" rev
> 0x00) pcibios0: PCI bus #3 is the last bus
> bios0: ROM list: 0xc0000/0xb400
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xd0000000, size 0x8000000
> inteldrm0 at vga1: apic 2 int 16 (irq 11)
> drm0 at inteldrm0
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2
> int 16 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB"
> rev 0x02: apic 2 int 19 (irq 5) uhci2 at pci0 dev 29 function 2
> "Intel 82801DB USB" rev 0x02: apic 2 int 18 (irq 12) ehci0 at pci0
> dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int 23 (irq
> 10) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root
> hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 30 function 0 "Intel
> 82801BA Hub-to-PCI" rev 0x82 pci1 at ppb0 bus 3
> rl0 at pci1 dev 6 function 0 "Realtek 8139" rev 0x10: apic 2 int 19
> (irq 5), address 00:30:4f:23:15:f0 rlphy0 at rl0 phy 0: RTL internal
> PHY rl1 at pci1 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int
> 17 (irq 3), address 00:0b:6a:f8:3e:e3 rlphy1 at rl1 phy 0: RTL
> internal PHY ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC"
> rev 0x02: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 1
> "Intel 82801DB IDE" rev 0x02: DMA, channel 0 configured to
> compatibility, channel 1 configured to compatibility wd0 at pciide0
> channel 0 drive 0: <SAMSUNG SP0411N> wd0: 16-sector PIO, LBA48,
> 38204MB, 78242976 sectors wd0(pciide0:0:0): using PIO mode 4,
> Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at
> atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW
> AD-7170A, 1.03> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO
> mode 4, Ultra-DMA mode 4 auich0 at pci0 dev 31 function 5 "Intel
> 82801DB AC97" rev 0x02: apic 2 int 17 (irq 3), ICH4 AC97 ac97: codec
> id 0x434d4961 (C-Media Electronics CMI9739) audio0 at auich0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
> lm1 at wbsio0 port 0x290/8: W83627HF
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech
> USB-PS/2 Optical Mouse" rev 2.00/11.10 addr 2 uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> WARNING: / was not properly unmounted
> inteldrm0: gpu hung!
> no reset function for chipset.
> error: [drm:pid8065:inteldrm_lastclose] *ERROR* failed to idle
> hardware: 5 error: [drm:pid26694:inteldrm_lastclose] *ERROR* failed
> to idle hardware: 5 error: [drm:pid26694:i915_gem_entervt_ioctl]
> *ERROR* Reenabling wedged hardware, good luck inteldrm0: gpu hung!
> no reset function for chipset.
> OpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010
>     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> real mem  = 527986688 (503MB) avail mem = 509390848 (485MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 12/17/03, BIOS32 rev. 0 @
> 0xfdb30, SMBIOS rev. 2.3 @ 0xf0630 (32 entries) bios0: vendor
> American Megatrends Inc. version "P2.60" date 12/17/2003 acpi at
> bios0 function 0x0 not configured mpbios0 at bios0: Intel MP
> Specification 1.4 cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 99MHz
> mpbios0: bus 0 is type PCI  
> mpbios0: bus 1 is type PCI  
> mpbios0: bus 2 is type PCI  
> mpbios0: bus 3 is type PCI  
> mpbios0: bus 4 is type ISA  
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf79e0/176 (9 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DB LPC" rev
> 0x00) pcibios0: PCI bus #3 is the last bus
> bios0: ROM list: 0xc0000/0xb400
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xd0000000, size 0x8000000
> inteldrm0 at vga1: apic 2 int 16 (irq 11)
> drm0 at inteldrm0
> uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2
> int 16 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB"
> rev 0x02: apic 2 int 19 (irq 5) uhci2 at pci0 dev 29 function 2
> "Intel 82801DB USB" rev 0x02: apic 2 int 18 (irq 12) ehci0 at pci0
> dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int 23 (irq
> 10) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root
> hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 30 function 0 "Intel
> 82801BA Hub-to-PCI" rev 0x82 pci1 at ppb0 bus 3
> rl0 at pci1 dev 6 function 0 "Realtek 8139" rev 0x10: apic 2 int 19
> (irq 5), address 00:30:4f:23:15:f0 rlphy0 at rl0 phy 0: RTL internal
> PHY rl1 at pci1 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int
> 17 (irq 3), address 00:0b:6a:f8:3e:e3 rlphy1 at rl1 phy 0: RTL
> internal PHY ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC"
> rev 0x02: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 1
> "Intel 82801DB IDE" rev 0x02: DMA, channel 0 configured to
> compatibility, channel 1 configured to compatibility wd0 at pciide0
> channel 0 drive 0: <SAMSUNG SP0411N> wd0: 16-sector PIO, LBA48,
> 38204MB, 78242976 sectors wd0(pciide0:0:0): using PIO mode 4,
> Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at
> atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW
> AD-7170A, 1.03> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO
> mode 4, Ultra-DMA mode 4 auich0 at pci0 dev 31 function 5 "Intel
> 82801DB AC97" rev 0x02: apic 2 int 17 (irq 3), ICH4 AC97 ac97: codec
> id 0x434d4961 (C-Media Electronics CMI9739) audio0 at auich0
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
> lm1 at wbsio0 port 0x290/8: W83627HF
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech
> USB-PS/2 Optical Mouse" rev 2.00/11.10 addr 2 uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
> WARNING: / was not properly unmounted
>  fine, so I suspect something is broken
> in the way scrotwm works.
>
> full dmesg follows:
>
>


--
With best regards,
        Gregory Edigarov

Reply | Threaded
Open this post in threaded view
|

Re: scrotwm hangs X after update to 4.8

Stan-18
On Tue, Nov 02, 2010 at 06:22:43PM +0200, Gregory Edigarov wrote:
> well, it seems like it was xorg.conf.
>
> after running X -configure and reinstalling the config - problem seems
> to have wanished.
>
> will observe the behaviour, though...
>
What are the diferences between the old config file, and the new one?


--
A: Because it messes up the order in which people normally read text.
Q: Why is top-posting such a bad thing?
A: Top-posting.
Q: What is the most annoying thing in e-mail?

Reply | Threaded
Open this post in threaded view
|

Re: scrotwm hangs X after update to 4.8

Marco Peereboom-4
In reply to this post by Gregory Edigarov-2
That looks like a hardware driver issue.

oga any insight?

On Tue, Nov 02, 2010 at 06:22:43PM +0200, Gregory Edigarov wrote:

>
> well, it seems like it was xorg.conf.
>
> after running X -configure and reinstalling the config - problem seems
> to have wanished.
>
> will observe the behaviour, though...
>
> On Tue, 2 Nov 2010 17:36:08 +0200
> Gregory Edigarov <[hidden email]> wrote:
>
> > Hello,
> >
> > not sure about fvwm yet, but it seems like scrotwm can't work
> > correctly:
> >
> > inteldrm0: gpu hung!
> > no reset function for chipset.
> > error: [drm:pid8065:inteldrm_lastclose] *ERROR* failed to idle
> > hardware: 5 error: [drm:pid26694:inteldrm_lastclose] *ERROR* failed to
> > idle hardware: 5 error: [drm:pid26694:i915_gem_entervt_ioctl] *ERROR*
> > Reenabling wedged hardware, good luck inteldrm0: gpu hung!
> > no reset function for chipset.
> >
> >
> > under fvwm system seems to workOpenBSD 4.8 (GENERIC) #136: Mon Aug 16
> > 09:06:23 MDT 2010
> > [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC cpu0:
> > Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> > real mem  = 527986688 (503MB) avail mem = 509390848 (485MB) mainbus0
> > at root bios0 at mainbus0: AT/286+ BIOS, date 12/17/03, BIOS32 rev. 0
> > @ 0xfdb30, SMBIOS rev. 2.3 @ 0xf0630 (32 entries) bios0: vendor
> > American Megatrends Inc. version "P2.60" date 12/17/2003 acpi at
> > bios0 function 0x0 not configured mpbios0 at bios0: Intel MP
> > Specification 1.4 cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: apic clock running at 99MHz
> > mpbios0: bus 0 is type PCI  
> > mpbios0: bus 1 is type PCI  
> > mpbios0: bus 2 is type PCI  
> > mpbios0: bus 3 is type PCI  
> > mpbios0: bus 4 is type ISA  
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf79e0/176 (9 entries)
> > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DB LPC" rev
> > 0x00) pcibios0: PCI bus #3 is the last bus
> > bios0: ROM list: 0xc0000/0xb400
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x03
> > vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x03
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > intagp0 at vga1
> > agp0 at intagp0: aperture at 0xd0000000, size 0x8000000
> > inteldrm0 at vga1: apic 2 int 16 (irq 11)
> > drm0 at inteldrm0
> > uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2
> > int 16 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB"
> > rev 0x02: apic 2 int 19 (irq 5) uhci2 at pci0 dev 29 function 2
> > "Intel 82801DB USB" rev 0x02: apic 2 int 18 (irq 12) ehci0 at pci0
> > dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int 23 (irq
> > 10) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root
> > hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 30 function 0 "Intel
> > 82801BA Hub-to-PCI" rev 0x82 pci1 at ppb0 bus 3
> > rl0 at pci1 dev 6 function 0 "Realtek 8139" rev 0x10: apic 2 int 19
> > (irq 5), address 00:30:4f:23:15:f0 rlphy0 at rl0 phy 0: RTL internal
> > PHY rl1 at pci1 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int
> > 17 (irq 3), address 00:0b:6a:f8:3e:e3 rlphy1 at rl1 phy 0: RTL
> > internal PHY ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC"
> > rev 0x02: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 1
> > "Intel 82801DB IDE" rev 0x02: DMA, channel 0 configured to
> > compatibility, channel 1 configured to compatibility wd0 at pciide0
> > channel 0 drive 0: <SAMSUNG SP0411N> wd0: 16-sector PIO, LBA48,
> > 38204MB, 78242976 sectors wd0(pciide0:0:0): using PIO mode 4,
> > Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at
> > atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW
> > AD-7170A, 1.03> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO
> > mode 4, Ultra-DMA mode 4 auich0 at pci0 dev 31 function 5 "Intel
> > 82801DB AC97" rev 0x02: apic 2 int 17 (irq 3), ICH4 AC97 ac97: codec
> > id 0x434d4961 (C-Media Electronics CMI9739) audio0 at auich0
> > usb1 at uhci0: USB revision 1.0
> > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb2 at uhci1: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci2: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at ichpcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > lpt0 at isa0 port 0x378/4 irq 7
> > wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
> > lm1 at wbsio0 port 0x290/8: W83627HF
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> > mtrr: Pentium Pro MTRR support
> > uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech
> > USB-PS/2 Optical Mouse" rev 2.00/11.10 addr 2 uhidev0: iclass 3/1
> > ums0 at uhidev0: 3 buttons, Z dir
> > wsmouse0 at ums0 mux 0
> > softraid0 at root
> > root on wd0a swap on wd0b dump on wd0b
> > WARNING: / was not properly unmounted
> > inteldrm0: gpu hung!
> > no reset function for chipset.
> > error: [drm:pid8065:inteldrm_lastclose] *ERROR* failed to idle
> > hardware: 5 error: [drm:pid26694:inteldrm_lastclose] *ERROR* failed
> > to idle hardware: 5 error: [drm:pid26694:i915_gem_entervt_ioctl]
> > *ERROR* Reenabling wedged hardware, good luck inteldrm0: gpu hung!
> > no reset function for chipset.
> > OpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010
> >     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
> > cpu0: Intel(R) Celeron(R) CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> > cpu0:
> > FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,CNXT-ID,xTPR
> > real mem  = 527986688 (503MB) avail mem = 509390848 (485MB)
> > mainbus0 at root
> > bios0 at mainbus0: AT/286+ BIOS, date 12/17/03, BIOS32 rev. 0 @
> > 0xfdb30, SMBIOS rev. 2.3 @ 0xf0630 (32 entries) bios0: vendor
> > American Megatrends Inc. version "P2.60" date 12/17/2003 acpi at
> > bios0 function 0x0 not configured mpbios0 at bios0: Intel MP
> > Specification 1.4 cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: apic clock running at 99MHz
> > mpbios0: bus 0 is type PCI  
> > mpbios0: bus 1 is type PCI  
> > mpbios0: bus 2 is type PCI  
> > mpbios0: bus 3 is type PCI  
> > mpbios0: bus 4 is type ISA  
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> > pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> > pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf79e0/176 (9 entries)
> > pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801DB LPC" rev
> > 0x00) pcibios0: PCI bus #3 is the last bus
> > bios0: ROM list: 0xc0000/0xb400
> > pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> > pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x03
> > vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x03
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> > intagp0 at vga1
> > agp0 at intagp0: aperture at 0xd0000000, size 0x8000000
> > inteldrm0 at vga1: apic 2 int 16 (irq 11)
> > drm0 at inteldrm0
> > uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x02: apic 2
> > int 16 (irq 11) uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB"
> > rev 0x02: apic 2 int 19 (irq 5) uhci2 at pci0 dev 29 function 2
> > "Intel 82801DB USB" rev 0x02: apic 2 int 18 (irq 12) ehci0 at pci0
> > dev 29 function 7 "Intel 82801DB USB" rev 0x02: apic 2 int 23 (irq
> > 10) usb0 at ehci0: USB revision 2.0 uhub0 at usb0 "Intel EHCI root
> > hub" rev 2.00/1.00 addr 1 ppb0 at pci0 dev 30 function 0 "Intel
> > 82801BA Hub-to-PCI" rev 0x82 pci1 at ppb0 bus 3
> > rl0 at pci1 dev 6 function 0 "Realtek 8139" rev 0x10: apic 2 int 19
> > (irq 5), address 00:30:4f:23:15:f0 rlphy0 at rl0 phy 0: RTL internal
> > PHY rl1 at pci1 dev 10 function 0 "Realtek 8139" rev 0x10: apic 2 int
> > 17 (irq 3), address 00:0b:6a:f8:3e:e3 rlphy1 at rl1 phy 0: RTL
> > internal PHY ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC"
> > rev 0x02: 24-bit timer at 3579545Hz pciide0 at pci0 dev 31 function 1
> > "Intel 82801DB IDE" rev 0x02: DMA, channel 0 configured to
> > compatibility, channel 1 configured to compatibility wd0 at pciide0
> > channel 0 drive 0: <SAMSUNG SP0411N> wd0: 16-sector PIO, LBA48,
> > 38204MB, 78242976 sectors wd0(pciide0:0:0): using PIO mode 4,
> > Ultra-DMA mode 2 atapiscsi0 at pciide0 channel 1 drive 0 scsibus0 at
> > atapiscsi0: 2 targets cd0 at scsibus0 targ 0 lun 0: <Optiarc, DVD RW
> > AD-7170A, 1.03> ATAPI 5/cdrom removable cd0(pciide0:1:0): using PIO
> > mode 4, Ultra-DMA mode 4 auich0 at pci0 dev 31 function 5 "Intel
> > 82801DB AC97" rev 0x02: apic 2 int 17 (irq 3), ICH4 AC97 ac97: codec
> > id 0x434d4961 (C-Media Electronics CMI9739) audio0 at auich0
> > usb1 at uhci0: USB revision 1.0
> > uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb2 at uhci1: USB revision 1.0
> > uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > usb3 at uhci2: USB revision 1.0
> > uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at ichpcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > lpt0 at isa0 port 0x378/4 irq 7
> > wbsio0 at isa0 port 0x2e/2: W83627HF rev 0x17
> > lm1 at wbsio0 port 0x290/8: W83627HF
> > npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> > fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> > fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> > mtrr: Pentium Pro MTRR support
> > uhidev0 at uhub2 port 1 configuration 1 interface 0 "Logitech
> > USB-PS/2 Optical Mouse" rev 2.00/11.10 addr 2 uhidev0: iclass 3/1
> > ums0 at uhidev0: 3 buttons, Z dir
> > wsmouse0 at ums0 mux 0
> > softraid0 at root
> > root on wd0a swap on wd0b dump on wd0b
> > WARNING: / was not properly unmounted
> >  fine, so I suspect something is broken
> > in the way scrotwm works.
> >
> > full dmesg follows:
> >
> >
>
>
> --
> With best regards,
> Gregory Edigarov

Reply | Threaded
Open this post in threaded view
|

Re: scrotwm hangs X after update to 4.8

Gregory Edigarov-2
On Tue, 2 Nov 2010 12:52:00 -0500
Marco Peereboom <[hidden email]> wrote:

> That looks like a hardware driver issue.

That's what I think for now... I have turned off DRI in my adapter
section....
Will observe the behaviour, and update soon.  
> oga any insight?



--
With best regards,
        Gregory Edigarov

Reply | Threaded
Open this post in threaded view
|

Re: scrotwm hangs X after update to 4.8

Gregory Edigarov-2
On Wed, 3 Nov 2010 12:20:53 +0200
Gregory Edigarov <[hidden email]> wrote:

> On Tue, 2 Nov 2010 12:52:00 -0500
> Marco Peereboom <[hidden email]> wrote:
>
> > That looks like a hardware driver issue.
>
> That's what I think for now... I have turned off DRI in my adapter
> section....
> Will observe the behaviour, and update soon.  

Immediatelly after I've sent the previous mail, there was a hang again,
with same simptoms.

for now I've downgraded X to 4.7....

will update at the end of the day.

--
With best regards,
        Gregory Edigarov

Reply | Threaded
Open this post in threaded view
|

Re: scrotwm hangs X after update to 4.8

Gregory Edigarov-2
On Wed, 3 Nov 2010 13:10:52 +0200
Gregory Edigarov <[hidden email]> wrote:

> On Wed, 3 Nov 2010 12:20:53 +0200
> Gregory Edigarov <[hidden email]> wrote:
>
> > On Tue, 2 Nov 2010 12:52:00 -0500
> > Marco Peereboom <[hidden email]> wrote:
> >
> > > That looks like a hardware driver issue.
> >
> > That's what I think for now... I have turned off DRI in my adapter
> > section....
> > Will observe the behaviour, and update soon.  
>
> Immediatelly after I've sent the previous mail, there was a hang
> again, with same simptoms.
>
> for now I've downgraded X to 4.7....
>
> will update at the end of the day.
OK, so here is the promised update:

It now seems like 4.7's X on 4.8 base system (yes I know it's bad and
unsupported but that's where I left after all) works perfectly with DRI
turned off. However, there were hungups when I've been trying to run
4.7's with DRI, AND 4.8's X whether I turn DRI on or off.

What else do you info do you need in order to resolve the issue?


--
With best regards,
        Gregory Edigarov

Reply | Threaded
Open this post in threaded view
|

Re: scrotwm hangs X after update to 4.8

Tom Murphy-7
In reply to this post by Gregory Edigarov-2
Hi,

  This might be a bit of a long shot, but try:

  Option "FramebufferCompression" "False"

  It fixed inteldrm0: gpu hung! messages on my Acer's Intel 845GM
chipset. It might keep it from hanging in yours?

  Tom

Reply | Threaded
Open this post in threaded view
|

Re: scrotwm hangs X after update to 4.8

David Coppa
On Thu, Nov 4, 2010 at 2:25 PM, Tom Murphy <[hidden email]> wrote:
> Hi,
>
>  This might be a bit of a long shot, but try:
>
>  Option "FramebufferCompression" "False"
>
>  It fixed inteldrm0: gpu hung! messages on my Acer's Intel 845GM
> chipset. It might keep it from hanging in yours?

Maybe this[1] should be extended to other Intel chipsets?

[1]
http://www.openbsd.org/cgi-bin/cvsweb/xenocara/driver/xf86-video-intel/src/i8
30.h?rev=1.10

ciao,
David

Reply | Threaded
Open this post in threaded view
|

Re: scrotwm hangs X after update to 4.8

Gregory Edigarov-2
In reply to this post by Tom Murphy-7
On Thu, 4 Nov 2010 13:25:18 +0000
Tom Murphy <[hidden email]> wrote:

> Hi,
>
>   This might be a bit of a long shot, but try:
>
>   Option "FramebufferCompression" "False"
>
>   It fixed inteldrm0: gpu hung! messages on my Acer's Intel 845GM
> chipset. It might keep it from hanging in yours?

Will try it a bit later and post on result.

--
With best regards,
        Gregory Edigarov

Reply | Threaded
Open this post in threaded view
|

Re: scrotwm hangs X after update to 4.8

William Graeber-3
In reply to this post by Gregory Edigarov-2
Just to add some more information to this discussion, it appears that
I'm now getting a similar error:

inteldrm0: gpu hung!
no reset function for chipset.
error: [drm:pid3099::inteldrm_lastclose] *ERROR* failed to idle hardware: 5
error: [drm:pid8658:inteldrm_lastclose] *ERROR* failed to idle hardware: 5
error: [drm:pid8658:i915_gem_entervt_ioctl] *ERROR* Reenabling wedged
hardwarg, good luck
inteldrm0: gpu hung!
no reset function for chipset.

dmesg as follows:

OpenBSD 4.8 (GENERIC) #136: Mon Aug 16 09:06:23 MDT 2010
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM
real mem  = 527986688 (503MB)
avail mem = 509390848 (485MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 05/28/02, BIOS32 rev. 0 @
0xeba30, SMBIOS rev. 2.3 @ 0xfd486 (46 entries)
bios0: vendor Compaq version "686O2 v1.08" date 05/28/2002
bios0: Compaq Evo D510 SFF
acpi0 at bios0: rev 0
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP SSDT SSDT SSDT SSDT SSDT SSDT SSDT APIC SSDT
SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices PCI0(S4) HUB_(S4) COM1(S4) COM2(S4) USB1(S3)
USB2(S3) USB3(S3) EUSB(S3) PBTN(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 5 (HUB_)
acpicpu0 at acpi0
acpibtn0 at acpi0: PBTN
bios0: ROM list: 0xc0000/0xac00! 0xcac00/0x1800 0xe1c00/0x9000!
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82845G Host" rev 0x01
vga1 at pci0 dev 2 function 0 "Intel 82845G Video" rev 0x01
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xf0000000, size 0x8000000
inteldrm0 at vga1: apic 8 int 16 (irq 11)
drm0 at inteldrm0
uhci0 at pci0 dev 29 function 0 "Intel 82801DB USB" rev 0x01: apic 8
int 16 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801DB USB" rev 0x01: apic 8
int 19 (irq 5)
ehci0 at pci0 dev 29 function 7 "Intel 82801DB USB" rev 0x01: apic 8
int 23 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x81
pci1 at ppb0 bus 5
fxp0 at pci1 dev 8 function 0 "Intel PRO/100 VM" rev 0x81, i82562:
apic 8 int 20 (irq 5), address 00:08:02:39:b0:8e
inphy0 at fxp0 phy 1: i82562EM 10/100 PHY, rev. 0
bktr0 at pci1 dev 9 function 0 "Brooktree BT878" rev 0x11: apic 8 int
18 (irq 10)
bktr0: ATI TV-Wonder/VE, Philips NTSC tuner.
"Brooktree BT878 Audio" rev 0x11 at pci1 dev 9 function 1 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801DB LPC" rev 0x01
pciide0 at pci0 dev 31 function 1 "Intel 82801DB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to
compatibility
wd0 at pciide0 channel 0 drive 0: <WDC WD400JB-00JJC0>
wd0: 16-sector PIO, LBA, 38166MB, 78165360 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, CD-RW GCE-8240B, 1.07> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
auich0 at pci0 dev 31 function 5 "Intel 82801DB AC97" rev 0x01: apic 8
int 17 (irq 5), ICH4 AC97
ac97: codec id 0x41445372 (Analog Devices AD1981A)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mtrr: Pentium Pro MTRR support
uplcom0 at uhub2 port 1 "Prolific Technology Inc. USB-Serial
Controller" rev 1.10/3.00 addr 2
ucom0 at uplcom0
ugen0 at uhub1 port 1 "APC Back-UPS ES 550 FW:843.K1 .D USB FW:K1" rev
1.10/1.06 addr 2
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Logitech USB
RECEIVER" rev 1.10/25.10 addr 3
uhidev0: iclass 3/1
ums0 at uhidev0: 16 buttons, Z dir
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted

Reply | Threaded
Open this post in threaded view
|

Re: scrotwm hangs X after update to 4.8

William Graeber-3
In reply to this post by Gregory Edigarov-2
On Wed, Nov 3, 2010 at 11:24, Gregory Edigarov <[hidden email]> wrote:
> It now seems like 4.7's X on 4.8 base system (yes I know it's bad and
> unsupported but that's where I left after all) works perfectly with DRI
> turned off. However, there were hungups when I've been trying to run
> 4.7's with DRI, AND 4.8's X whether I turn DRI on or off.

In my case, upgrading to current has solved the issue (as far as I can
tell after a few hours' use) as long as I don't suspend the system -
then I get some weird artifacts upon resume, although no crashes.