samba : snapshots of 6.5

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

samba : snapshots of 6.5

Tuyosi Takesima
hi all .

the samba of snapshots does not start .

dell# /etc/rc.d/samba start
     smbd(timeout)

but
dell# nmbd -D
dell# smbd -D
dell# ps ax | grep mbd
52176 ??  Is      0:00.05 /usr/local/sbin/smbd -D -D
87251 ??  S       0:00.05 /usr/local/sbin/smbd -D -D
64985 ??  S       0:00.00 /usr/local/sbin/smbd -D -D
89762 ??  I       0:00.02 /usr/local/sbin/smbd -D -D
74018 ??  Ss      0:00.03 nmbd -D
19823 p0  S+p     0:00.00 grep mbd


by the way
/comment-out.bat /etc/samba/smb.conf
[global]
   workgroup = WORKGROUP
   server string = Samba Server
   server role = standalone server
   log file = /var/log/samba/smbd.%m
   max log size = 50
   dns proxy = no
[homes]
   comment = Home Directories
   browseable = no
   writable = yes


and
dell# testparm
rlimit_max: increasing rlimit_max (128) to minimum Windows limit (16384)
Registered MSG_REQ_POOL_USAGE
Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (128) to minimum Windows limit (16384)
Processing section "[homes]"
Loaded services file OK.
Server role: ROLE_STANDALONE

Press enter to see a dump of your service definitions

# Global parameters
[global]
dns proxy = No
log file = /var/log/samba/smbd.%m
max log size = 50
server role = standalone server
server string = Samba Server
idmap config * : backend = tdb


[homes]
browseable = No
comment = Home Directories
read only = No



--

from 竹島強

Reply | Threaded
Open this post in threaded view
|

Re: samba : snapshots of 6.5

Hrvoje Popovski
On 14.4.2019. 20:10, Tuyosi T wrote:
> hi all .
>
> the samba of snapshots does not start .
>
> dell# /etc/rc.d/samba start
>      smbd(timeout)
>

I have similar problem with samba after upgrade to 4.8.11, smbd timeouts
but it starts.

# rcctl stop samba
nmbd(ok)
smbd(ok)

# rcctl start samba
smbd(timeout)

# ps auxw | grep mbd
root     88754  0.0  0.1  1740  6040 ??  Ss     3:33PM    0:00.02
/usr/local/sbin/smbd -D
root     48917  0.0  0.0  1616  2260 ??  S      3:33PM    0:00.01
/usr/local/sbin/smbd -D
root     47827  0.0  0.0  1616  1832 ??  S      3:33PM    0:00.00
/usr/local/sbin/smbd -D


and if i execute rcctl start samba once again nmbd start normally
# rcctl start samba
nmbd(ok)

# ps auxw | grep mbd
root     88754  0.0  0.1  1740  6040 ??  Ss     3:33PM    0:00.02
/usr/local/sbin/smbd -D
root     47827  0.0  0.0  1616  1832 ??  S      3:33PM    0:00.00
/usr/local/sbin/smbd -D
root     48917  0.0  0.0  1616  2260 ??  S      3:33PM    0:00.01
/usr/local/sbin/smbd -D
root     79668  0.0  0.0  1464  2580 ??  Ss     3:34PM    0:00.04
/usr/local/sbin/nmbd -D

Reply | Threaded
Open this post in threaded view
|

Re: samba : snapshots of 6.5

Vijay Sankar
On 4/15/19 8:38 AM, Hrvoje Popovski wrote:

> On 14.4.2019. 20:10, Tuyosi T wrote:
>> hi all .
>>
>> the samba of snapshots does not start .
>>
>> dell# /etc/rc.d/samba start
>>       smbd(timeout)
>>
> I have similar problem with samba after upgrade to 4.8.11, smbd timeouts
> but it starts.
>
> # rcctl stop samba
> nmbd(ok)
> smbd(ok)
>
> # rcctl start samba
> smbd(timeout)
>
> # ps auxw | grep mbd
> root     88754  0.0  0.1  1740  6040 ??  Ss     3:33PM    0:00.02
> /usr/local/sbin/smbd -D
> root     48917  0.0  0.0  1616  2260 ??  S      3:33PM    0:00.01
> /usr/local/sbin/smbd -D
> root     47827  0.0  0.0  1616  1832 ??  S      3:33PM    0:00.00
> /usr/local/sbin/smbd -D
>
>
> and if i execute rcctl start samba once again nmbd start normally
> # rcctl start samba
> nmbd(ok)
>
> # ps auxw | grep mbd
> root     88754  0.0  0.1  1740  6040 ??  Ss     3:33PM    0:00.02
> /usr/local/sbin/smbd -D
> root     47827  0.0  0.0  1616  1832 ??  S      3:33PM    0:00.00
> /usr/local/sbin/smbd -D
> root     48917  0.0  0.0  1616  2260 ??  S      3:33PM    0:00.01
> /usr/local/sbin/smbd -D
> root     79668  0.0  0.0  1464  2580 ??  Ss     3:34PM    0:00.04
> /usr/local/sbin/nmbd -D
>
I have not had this problem with Samba (running samba-4.8.11p0 as a
standalone file server). Starts and Restarts are visibly slower than the
corresponding 6.4 installation running samba-4.8.5p1. Probably not a
proper comparison since the 6.4 stats are from my laptop and 6.5 stats
are from a SuperMicro server. dmesg for both systems are below in case
it is of any relevance. If there are any config changes etc., that I can
test please let me know.

current# time /etc/rc.d/samba start
smbd(ok)
nmbd(ok)
     0m30.59s real     0m30.36s user     0m00.07s system

current# time /etc/rc.d/samba restart
nmbd(ok)
smbd(ok)
smbd(ok)
nmbd(ok)
     0m31.54s real     0m31.19s user     0m00.15s system

current# time /etc/rc.d/samba stop
nmbd(ok)
smbd(ok)
     0m00.68s real     0m00.60s user     0m00.05s system

Here are the stats from 6.4 running stock Samba.

fla1# time /etc/rc.d/samba start
smbd(ok)
nmbd(ok)
     0m00.92s real     0m00.66s user     0m00.17s system

fla1# time /etc/rc.d/samba restart
nmbd(ok)
smbd(ok)
smbd(ok)
nmbd(ok)
     0m01.43s real     0m01.08s user     0m00.35s system

fla1# time /etc/rc.d/samba stop
nmbd(ok)
smbd(ok)
     0m00.58s real     0m00.39s user     0m00.13s system

dmesg from 6.5 snapshot

current# dmesg
OpenBSD 6.5 (GENERIC.MP) #3: Sat Apr 13 14:48:43 MDT 2019
[hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16976637952 (16190MB)
avail mem = 16452501504 (15690MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x7fb77000 (61 entries)
bios0: vendor American Megatrends Inc. version "2.0a" date 03/09/2017
bios0: Supermicro Super Server
acpi0 at bios0: rev 2
acpi0: sleep states S0 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT SPMI MCFG HPET LPIT SSDT SSDT
SSDT DBGP DBG2 SSDT UEFI SSDT DMAR EINJ ERST BERT HEST
acpi0: wakeup devices PEGP(S4) PEG0(S4) PEGP(S4) PEG1(S4) PEGP(S4)
PEG2(S4) PXSX(S4) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4) RP11(S4) PXSX(S4)
RP12(S4) PXSX(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E3-1240 v5 @ 3.50GHz, 3501.44 MHz, 06-5e-03
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Xeon(R) CPU E3-1240 v5 @ 3.50GHz, 3499.98 MHz, 06-5e-03
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Xeon(R) CPU E3-1240 v5 @ 3.50GHz, 3499.98 MHz, 06-5e-03
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E3-1240 v5 @ 3.50GHz, 3499.98 MHz, 06-5e-03
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Xeon(R) CPU E3-1240 v5 @ 3.50GHz, 3499.98 MHz, 06-5e-03
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 1, core 0, package 0
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Xeon(R) CPU E3-1240 v5 @ 3.50GHz, 3499.98 MHz, 06-5e-03
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 1, package 0
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Xeon(R) CPU E3-1240 v5 @ 3.50GHz, 3499.98 MHz, 06-5e-03
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 1, core 2, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Xeon(R) CPU E3-1240 v5 @ 3.50GHz, 3499.98 MHz, 06-5e-03
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus 1 (RP09)
acpiprt5 at acpi0: bus 2 (RP10)
acpiprt6 at acpi0: bus 3 (RP11)
acpiprt7 at acpi0: bus 4 (BR51)
acpiprt8 at acpi0: bus -1 (RP12)
acpiprt9 at acpi0: bus -1 (RP13)
acpiprt10 at acpi0: bus -1 (RP01)
acpiprt11 at acpi0: bus -1 (RP05)
acpiprt12 at acpi0: bus -1 (RP17)
acpiprt13 at acpi0: bus -1 (RP18)
acpiprt14 at acpi0: bus -1 (RP19)
acpiprt15 at acpi0: bus -1 (RP20)
acpiprt16 at acpi0: bus -1 (RP14)
acpiprt17 at acpi0: bus -1 (RP15)
acpiprt18 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu4 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu5 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu6 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu7 at acpi0: C3(200@256 mwait.1@0x40), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PG00, resource for PEG0
acpipwrres1 at acpi0: PG01, resource for PEG1
acpipwrres2 at acpi0: PG02, resource for PEG2
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: WRST
acpipwrres21 at acpi0: WRST
acpipwrres22 at acpi0: WRST
acpipwrres23 at acpi0: FN00, resource for FAN0
acpipwrres24 at acpi0: FN01, resource for FAN1
acpipwrres25 at acpi0: FN02, resource for FAN2
acpipwrres26 at acpi0: FN03, resource for FAN3
acpipwrres27 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 119 degC
acpitz1 at acpi0: critical temperature is 119 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"IPI0001" at acpi0 not configured
"INT0E0C" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"INT33A1" at acpi0 not configured
acpibtn1 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
ipmi at mainbus0 not configured
cpu0: Enhanced SpeedStep 3501 MHz: speeds: 3501, 3500, 3300, 3100, 2900,
2700, 2500, 2300, 2100, 2000, 1800, 1600, 1400, 1200, 1000, 800 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Xeon E3-1200 v5 Host" rev 0x07
"Intel 100 Series ISH" rev 0x31 at pci0 dev 19 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x31: msi,
xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x31
"Intel 100 Series MEI" rev 0x31 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x31: msi,
AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 6.0Gb/s
ahci0: port 2: 6.0Gb/s
ahci0: port 3: 6.0Gb/s
ahci0: port 4: 6.0Gb/s
ahci0: port 5: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, WDC WD2003FZEX-0, 01.0> SCSI3
0/direct fixed naa.50014ee059bd50d6
sd0: 1907729MB, 512 bytes/sector, 3907029168 sectors
sd1 at scsibus1 targ 1 lun 0: <ATA, WDC WD2003FZEX-0, 01.0> SCSI3
0/direct fixed naa.50014ee004684384
sd1: 1907729MB, 512 bytes/sector, 3907029168 sectors
sd2 at scsibus1 targ 2 lun 0: <ATA, KINGSTON SUV400S, 0C3K> SCSI3
0/direct fixed naa.0550380440010000
sd2: 228936MB, 512 bytes/sector, 468862128 sectors, thin
sd3 at scsibus1 targ 3 lun 0: <ATA, KINGSTON SUV400S, 0C3K> SCSI3
0/direct fixed naa.0550380440010000
sd3: 228936MB, 512 bytes/sector, 468862128 sectors, thin
sd4 at scsibus1 targ 4 lun 0: <ATA, KINGSTON SUV400S, 0C3K> SCSI3
0/direct fixed naa.0550380440010000
sd4: 114473MB, 512 bytes/sector, 234441648 sectors, thin
sd5 at scsibus1 targ 5 lun 0: <ATA, KINGSTON SUV400S, 0C3K> SCSI3
0/direct fixed naa.0550380440010000
sd5: 228936MB, 512 bytes/sector, 468862128 sectors, thin
ppb0 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel I210" rev 0x03: msi, address
0c:c4:7a:e1:73:c6
ppb1 at pci0 dev 29 function 1 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel I210" rev 0x03: msi, address
0c:c4:7a:e1:73:c7
ppb2 at pci0 dev 29 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 3
ppb3 at pci3 dev 0 function 0 "ASPEED Technology AST1150 PCI" rev 0x03
pci4 at ppb3 bus 4
vga1 at pci4 dev 0 function 0 "ASPEED Technology AST2000" rev 0x30
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel C232 LPC" rev 0x31
"Intel 100 Series PMC" rev 0x31 at pci0 dev 31 function 2 not configured
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x31:
apic 2 int 16
iic0 at ichiic0
admtemp0 at iic0 addr 0x18: Xeon
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 5 configuration 1 interface 0 "Action Star
Enterprise USB KVM" rev 2.00/1.10 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub0 port 5 configuration 1 interface 1 "Action Star
Enterprise USB KVM" rev 2.00/1.10 addr 2
uhidev1: iclass 3/0, 4 report ids
ums0 at uhidev1 reportid 1: 16 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=7, output=7, feature=0
uhid2 at uhidev1 reportid 4: input=2, output=0, feature=0
uhub1 at uhub0 port 9 configuration 1 interface 0 "ATEN International
product 0x7000" rev 2.00/0.00 addr 3
uhidev2 at uhub1 port 1 configuration 1 interface 0 "ATEN International
product 0x2419" rev 1.10/1.00 addr 4
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 variable keys, 6 key codes
wskbd1 at ukbd1 mux 1
wskbd1: connecting to wsdisplay0
uhidev3 at uhub1 port 1 configuration 1 interface 1 "ATEN International
product 0x2419" rev 1.10/1.00 addr 4
uhidev3: iclass 3/1
ums1 at uhidev3: 3 buttons, Z dir
wsmouse1 at ums1 mux 0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd3a (c292c6b7364cdb6d.a) swap on sd3b dump on sd3b

dmesg from laptop running 6.4

OpenBSD 6.4 (GENERIC.MP) #8: Thu Mar 21 14:26:24 CET 2019
[hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 16669777920 (15897MB)
avail mem = 16155275264 (15406MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x4f0e1000 (62 entries)
bios0: vendor LENOVO version "N1MET37W (1.22 )" date 07/04/2017
bios0: LENOVO 20HRCTO1WW
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SSDT TPM2 UEFI SSDT SSDT HPET APIC MCFG ECDT
SSDT BOOT BATB SSDT SSDT SSDT WSMT SSDT SSDT DBGP DBG2 MSDM ASF! FPDT UEFI
acpi0: wakeup devices GLAN(S4) XHC_(S3) XDCI(S4) HDAS(S4) RP01(S4)
RP02(S4) RP04(S4) RP05(S4) RP06(S4) RP07(S4) RP08(S4) RP09(S4) RP10(S4)
RP11(S4) RP12(S4) RP13(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 23999999 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2595.04 MHz, 06-8e-09
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2593.96 MHz, 06-8e-09
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2593.96 MHz, 06-8e-09
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM) i7-7500U CPU @ 2.70GHz, 2593.96 MHz, 06-8e-09
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf0000000, bus 0-127
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 2 (RP01)
acpiprt2 at acpi0: bus -1 (RP02)
acpiprt3 at acpi0: bus 4 (RP03)
acpiprt4 at acpi0: bus -1 (RP04)
acpiprt5 at acpi0: bus 5 (RP05)
acpiprt6 at acpi0: bus -1 (RP06)
acpiprt7 at acpi0: bus -1 (RP07)
acpiprt8 at acpi0: bus -1 (RP08)
acpiprt9 at acpi0: bus 6 (RP09)
acpiprt10 at acpi0: bus -1 (RP10)
acpiprt11 at acpi0: bus -1 (RP11)
acpiprt12 at acpi0: bus -1 (RP12)
acpiprt13 at acpi0: bus -1 (RP13)
acpiprt14 at acpi0: bus -1 (RP14)
acpiprt15 at acpi0: bus -1 (RP15)
acpiprt16 at acpi0: bus -1 (RP16)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: PUBS, resource for XHC_
acpipwrres1 at acpi0: WRST
acpipwrres2 at acpi0: WRST
acpitz0 at acpi0: critical temperature is 128 degC
acpithinkpad0 at acpi0
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "01AV494" serial   808 type LiP oem "LGC"
acpicmos0 at acpi0
"ALPS0000" at acpi0 not configured
"INT0E0C" at acpi0 not configured
acpibtn0 at acpi0: SLPB
"PNP0C14" at acpi0 not configured
acpibtn1 at acpi0: LID_
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"USBC000" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout at acpivideo0 not configured
cpu0: Enhanced SpeedStep 2595 MHz: speeds: 2701, 2700, 2600, 2500, 2400,
2200, 2000, 1800, 1600, 1500, 1300, 1100, 800, 700, 600, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev 0x02
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load
firmware i915/kbl_dmc_ver1.bin (-22)
inteldrm0: 1920x1080, 32bpp
WARNING !wm_changed failed at /usr/src/sys/dev/pci/drm/i915/intel_pm.c:3609
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel Core GMM" rev 0x00 at pci0 dev 8 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi,
xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 2
rtsx0 at pci1 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 4
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev
0x88, msi
ppb2 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 5
nvme0 at pci3 dev 0 function 0 "Samsung SM981/PM981 NVMe" rev 0x00: msi,
NVMe 1.2
nvme0: SAMSUNG MZVLB1T0HALR-000L7, firmware 3L2QEXA7, serial S3TPNE0JB16623
scsibus1 at nvme0: 1 targets
sd0 at scsibus1 targ 0 lun 0: <NVMe, SAMSUNG MZVLB1T0, 3L2Q> SCSI4
0/direct fixed
sd0: 976762MB, 512 bytes/sector, 2000409264 sectors
ppb3 at pci0 dev 29 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci4 at ppb3 bus 6
pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x21: msi
azalia0: codecs: Conexant/0x2008, Intel/0x280b, using Conexant/0x2008
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
apic 2 int 16
iic0 at ichiic0
em0 at pci0 dev 31 function 6 "Intel I219-V" rev 0x21: msi, address
54:e1:ad:e4:c2:9a
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.2, 0x1e2b1 0x940300
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
uhidev0 at uhub0 port 1 configuration 1 interface 0 "Logitech Optical
USB Mouse" rev 2.00/3.40 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse2 at ums0 mux 0
uhidev1 at uhub0 port 2 configuration 1 interface 0 "Microsoft Wired
Keyboard 400" rev 1.10/1.10 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.10 addr 4
uvideo0 at uhub0 port 8 configuration 1 interface 0 "SunplusIT Inc
Integrated Camera" rev 2.00/16.07 addr 5
video0 at uvideo0
ugen1 at uhub0 port 9 "Validity Sensors product 0x0097" rev 2.00/1.64 addr 6
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (23cc937cb81fb4a7.a) swap on sd0b dump on sd0b
iwm0: hw rev 0x230, fw ver 22.361476.0, address d4:25:8b:6d:b0:be
WARNING !wm_changed failed at /usr/src/sys/dev/pci/drm/i915/intel_pm.c:3609
error: [drm:pid53531:intel_pipe_update_start] *ERROR* Potential atomic
update failure on pipe A
error: [drm:pid53531:intel_pipe_update_start] *ERROR* Potential atomic
update failure on pipe A

Reply | Threaded
Open this post in threaded view
|

Re: samba : snapshots of 6.5

Stuart Henderson
It is known/expected that smbd startup is very slow on OpenBSD at present,
https://marc.info/?t=155007955900003&r=1&w=2


Reply | Threaded
Open this post in threaded view
|

Re: samba : snapshots of 6.5

Tuyosi Takesima
In reply to this post by Tuyosi Takesima
hi,all

i reinstall samba by using ports .


dell# ps ax| grep bd
72188 p0  S+p     0:00.00 grep bd

dell# /etc/rc.d/samba -f start
smbd(timeout)

dell# ps ax| grep bd
71545 p0  R/1     0:41.36 /usr/local/sbin/smbd -D -D
52315 p0  S+p     0:00.00 grep bd

i think '-D -D' is perhaps bad .


by the way

dell# testparm
rlimit_max: increasing rlimit_max (128) to minimum Windows limit (16384)
Registered MSG_REQ_POOL_USAGE
Registered MSG_REQ_DMALLOC_MARK and LOG_CHANGED
Load smb config files from /etc/samba/smb.conf
rlimit_max: increasing rlimit_max (128) to minimum Windows limit (16384)
Processing section "[Share]"
Loaded services file OK.
Server role: ROLE_STANDALONE

Press enter to see a dump of your service definitions

# Global parameters
[global]
disable spoolss = Yes
dos charset = CP932
load printers = No
map to guest = Bad User
netbios name = OPENSAMBA
security = USER
server string = SAMBA SERVER Version %v
wins support = Yes
idmap config * : backend = tdb


[Share]
comment = Share Folder for All Users
path = /home/share/
read only = No


and virsion is

# $OpenBSD: Makefile,v 1.271 2019/04/12 18:21:17 jca Exp $
VERSION =               4.8.11


-----------------
regards