"ucode too large"

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

"ucode too large"

Paul de Weerd
I've just replaced my home gateway with a brandless machine with an
i5-7200U.  While preparing, I noticed the message "ucode too large"
scrolling by on the serial console, just before the kernel starts.

The dmesg shows cpu0 as mode 06-8e-09:

cpu0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz, 2395.19 MHz, 06-8e-09

While /etc/firmware/intel/06-8e-09 is the biggest file in that
directory (at 193kB), so this probably has something to do with that
and the MDS "fun".

Machine works fine as far as I can tell (typing this mail over an SSH
session through it).

Cheers,

Paul 'WEiRD' de Weerd

OpenBSD 6.5-current (GENERIC.MP) #6: Tue Jun  4 15:05:10 MDT 2019
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 34263703552 (32676MB)
avail mem = 33215164416 (31676MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x8d717000 (86 entries)
bios0: vendor American Megatrends Inc. version "5.12" date 05/28/2018
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SSDT HPET SSDT SSDT UEFI SSDT LPIT WSMT SSDT SSDT SSDT SSDT DBGP DBG2 SPCR DMAR ASF!
acpi0: wakeup devices PS2K(S0) PS2M(S0) PXSX(S0) RP09(S0) PXSX(S0) RP10(S0) PXSX(S0) RP11(S0) PXSX(S0) RP12(S0) PXSX(S0) RP13(S0) PXSX(S0) RP01(S0) PXSX(S0) RP02(S0) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz, 2395.19 MHz, 06-8e-09
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz, 2394.44 MHz, 06-8e-09
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus 1 (RP01)
acpiprt10 at acpi0: bus 2 (RP02)
acpiprt11 at acpi0: bus 3 (RP03)
acpiprt12 at acpi0: bus 4 (RP04)
acpiprt13 at acpi0: bus 5 (RP05)
acpiprt14 at acpi0: bus 6 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: WRST
acpipwrres1 at acpi0: WRST
acpipwrres2 at acpi0: WRST
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: FN00, resource for FAN0
acpipwrres21 at acpi0: FN01, resource for FAN1
acpipwrres22 at acpi0: FN02, resource for FAN2
acpipwrres23 at acpi0: FN03, resource for FAN3
acpipwrres24 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 119 degC
acpitz1 at acpi0: critical temperature is 119 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"INT33A1" at acpi0 not configured
acpibtn1 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using Skylake AVX MDS workaround
cpu0: Enhanced SpeedStep 2395 MHz: speeds: 2601, 2600, 2500, 2400, 2200, 2000, 1900, 1700, 1500, 1400, 1200, 1100, 800, 700, 600, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev 0x02
drm0 at inteldrm0
inteldrm0: msi
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 6.0Gb/s
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 860, RVT4> SCSI3 0/direct fixed naa.5002538e405cebf1
sd0: 476940MB, 512 bytes/sector, 976773168 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, Samsung SSD 860, RVQ0> SCSI3 0/direct fixed naa.5002538e40edbf97
sd1: 3815447MB, 512 bytes/sector, 7814037168 sectors, thin
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address 00:e0:67:17:d6:96
ppb1 at pci0 dev 28 function 1 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address 00:e0:67:17:d6:97
ppb2 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address 00:e0:67:17:d6:98
ppb3 at pci0 dev 28 function 3 "Intel 100 Series PCIE" rev 0xf1: msi
pci4 at ppb3 bus 4
em3 at pci4 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address 00:e0:67:17:d6:99
ppb4 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
pci5 at ppb4 bus 5
em4 at pci5 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address 00:e0:67:17:d6:9a
ppb5 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
pci6 at ppb5 bus 6
em5 at pci6 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address 00:e0:67:17:d6:9b
pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 int 16
iic0 at ichiic0
admtemp0 at iic0 addr 0x18: Xeon
admtemp1 at iic0 addr 0x1a: Xeon
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8772F rev 1, EC port 0xa40
vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
uhidev0 at uhub0 port 2 configuration 1 interface 0 "RDing TEMPERHUM1V1.2" rev 2.00/0.01 addr 2
uhidev0: iclass 3/1, 1 report id
ukbd0 at uhidev0 reportid 1: 8 variable keys, 5 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 2 configuration 1 interface 1 "RDing TEMPERHUM1V1.2" rev 2.00/0.01 addr 2
uhidev1: iclass 3/1
ugold0 at uhidev1
umbg0 at uhub0 port 3 configuration 1 interface 0 "Meinberg DCF600USB" rev 2.00/1.13 addr 3
umbg0: not synchronized, freerun
uftdi0 at uhub0 port 4 configuration 1 interface 0 "FTDI SYNLEAF - FT232R USB UART" rev 2.00/6.00 addr 4
ucom0 at uftdi0 portno 1
umass0 at uhub0 port 13 configuration 1 interface 0 "Western Digital My Passport 259D" rev 3.00/10.12 addr 5
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <WD, My Passport 259D, 1012> SCSI4 0/direct fixed
sd2: 3815415MB, 512 bytes/sector, 7813969920 sectors
ses0 at scsibus2 targ 1 lun 1: <WD, SES Device, 1012> SCSI4 13/enclosure services fixed
ses0: unable to read enclosure configuration
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (aec06f0350f24bab.a) swap on sd0b dump on sd0b
ugold0: 2 sensors type si7006 (temperature and humidity)

--
>++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
+++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
                 http://www.weirdnet.nl/                 

Reply | Threaded
Open this post in threaded view
|

Re: "ucode too large"

Claudio Jeker
On Fri, Jun 07, 2019 at 03:43:39PM +0200, Paul de Weerd wrote:

> I've just replaced my home gateway with a brandless machine with an
> i5-7200U.  While preparing, I noticed the message "ucode too large"
> scrolling by on the serial console, just before the kernel starts.
>
> The dmesg shows cpu0 as mode 06-8e-09:
>
> cpu0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz, 2395.19 MHz, 06-8e-09
>
> While /etc/firmware/intel/06-8e-09 is the biggest file in that
> directory (at 193kB), so this probably has something to do with that
> and the MDS "fun".
>
> Machine works fine as far as I can tell (typing this mail over an SSH
> session through it).
>

This should work if you are using a -current EFI boot(9) or try the
following diff for the BIOS boot(9). In both cases make sure you
installboot the new code.

--
:wq Claudio

Index: arch/amd64/stand/libsa/exec_i386.c
===================================================================
RCS file: /cvs/src/sys/arch/amd64/stand/libsa/exec_i386.c,v
retrieving revision 1.31
diff -u -p -r1.31 exec_i386.c
--- arch/amd64/stand/libsa/exec_i386.c 28 May 2019 17:38:02 -0000 1.31
+++ arch/amd64/stand/libsa/exec_i386.c 7 Jun 2019 13:58:05 -0000
@@ -226,7 +226,7 @@ ucode_load(void)
  return;
 
  buflen = sb.st_size;
- if (buflen > 128*1024) {
+ if (buflen > 256*1024) {
  printf("ucode too large\n");
  return;
  }

Reply | Threaded
Open this post in threaded view
|

Re: "ucode too large"

Jonathan Gray-11
In reply to this post by Paul de Weerd
On Fri, Jun 07, 2019 at 03:43:39PM +0200, Paul de Weerd wrote:

> I've just replaced my home gateway with a brandless machine with an
> i5-7200U.  While preparing, I noticed the message "ucode too large"
> scrolling by on the serial console, just before the kernel starts.
>
> The dmesg shows cpu0 as mode 06-8e-09:
>
> cpu0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz, 2395.19 MHz, 06-8e-09
>
> While /etc/firmware/intel/06-8e-09 is the biggest file in that
> directory (at 193kB), so this probably has something to do with that
> and the MDS "fun".
>
> Machine works fine as far as I can tell (typing this mail over an SSH
> session through it).

The limit was raised only for efiboot.

https://marc.info/?l=openbsd-cvs&m=155853966111794&w=2

For non-efi it is still 128KB.  The region of memory it uses starts
at 1MB.  I think you should be able to raise the 'too large' check
to 256KB without problem but have not tested this.

You'll need to run installboot after installing.  Wouldn't hurt
to have a miniroot on removable media to recover if needed.

Index: arch/amd64/stand/boot/conf.c
===================================================================
RCS file: /cvs/src/sys/arch/amd64/stand/boot/conf.c,v
retrieving revision 1.46
diff -u -p -r1.46 conf.c
--- arch/amd64/stand/boot/conf.c 15 May 2019 06:52:33 -0000 1.46
+++ arch/amd64/stand/boot/conf.c 7 Jun 2019 14:05:58 -0000
@@ -40,7 +40,7 @@
 #include <biosdev.h>
 #include <dev/cons.h>
 
-const char version[] = "3.44";
+const char version[] = "3.45";
 int debug = 1;
 
 
Index: arch/amd64/stand/libsa/exec_i386.c
===================================================================
RCS file: /cvs/src/sys/arch/amd64/stand/libsa/exec_i386.c,v
retrieving revision 1.31
diff -u -p -r1.31 exec_i386.c
--- arch/amd64/stand/libsa/exec_i386.c 28 May 2019 17:38:02 -0000 1.31
+++ arch/amd64/stand/libsa/exec_i386.c 7 Jun 2019 14:04:19 -0000
@@ -226,7 +226,7 @@ ucode_load(void)
  return;
 
  buflen = sb.st_size;
- if (buflen > 128*1024) {
+ if (buflen > 256*1024) {
  printf("ucode too large\n");
  return;
  }

Reply | Threaded
Open this post in threaded view
|

Re: "ucode too large"

Paul de Weerd
Hi Claudio, Jonathan,

Thank you both for the diff - it has fixed the 'ucode too large'
problem (this machine uses biosboot, not UEFI), and has made a
difference in dmesg:

cpu[01] both gained flags MD_CLEAR,TSXFA,L1DF,SSBD

And a further down this changed:

-cpu0: using Skylake AVX MDS workaround
+cpu0: using VERW MDS workaround (except on vmm entry)

-vmm0 at mainbus0: VMX/EPT (using slow L1TF mitigation)
+vmm0 at mainbus0: VMX/EPT

Full dmesg below.

Thanks!

Paul

OpenBSD 6.5-current (GENERIC.MP) #6: Tue Jun  4 15:05:10 MDT 2019
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 34263703552 (32676MB)
avail mem = 33215160320 (31676MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.0 @ 0x8d717000 (86 entries)
bios0: vendor American Megatrends Inc. version "5.12" date 05/28/2018
acpi0 at bios0: rev 2
acpi0: sleep states S0 S5
acpi0: tables DSDT FACP APIC FPDT MCFG SSDT FIDT SSDT HPET SSDT SSDT UEFI SSDT LPIT WSMT SSDT SSDT SSDT SSDT DBGP DBG2 SPCR DMAR ASF!
acpi0: wakeup devices PS2K(S0) PS2M(S0) PXSX(S0) RP09(S0) PXSX(S0) RP10(S0) PXSX(S0) RP11(S0) PXSX(S0) RP12(S0) PXSX(S0) RP13(S0) PXSX(S0) RP01(S0) PXSX(S0) RP02(S0) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz, 2395.13 MHz, 06-8e-09
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 24MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-7200U CPU @ 2.50GHz, 2394.43 MHz, 06-8e-09
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,AVX2,SMEP,BMI2,ERMS,INVPCID,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,MD_CLEAR,TSXFA,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus 1 (RP01)
acpiprt10 at acpi0: bus 2 (RP02)
acpiprt11 at acpi0: bus 3 (RP03)
acpiprt12 at acpi0: bus 4 (RP04)
acpiprt13 at acpi0: bus 5 (RP05)
acpiprt14 at acpi0: bus 6 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0: not present
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33), C1(1000@1 mwait.1), PSS
acpipwrres0 at acpi0: WRST
acpipwrres1 at acpi0: WRST
acpipwrres2 at acpi0: WRST
acpipwrres3 at acpi0: WRST
acpipwrres4 at acpi0: WRST
acpipwrres5 at acpi0: WRST
acpipwrres6 at acpi0: WRST
acpipwrres7 at acpi0: WRST
acpipwrres8 at acpi0: WRST
acpipwrres9 at acpi0: WRST
acpipwrres10 at acpi0: WRST
acpipwrres11 at acpi0: WRST
acpipwrres12 at acpi0: WRST
acpipwrres13 at acpi0: WRST
acpipwrres14 at acpi0: WRST
acpipwrres15 at acpi0: WRST
acpipwrres16 at acpi0: WRST
acpipwrres17 at acpi0: WRST
acpipwrres18 at acpi0: WRST
acpipwrres19 at acpi0: WRST
acpipwrres20 at acpi0: FN00, resource for FAN0
acpipwrres21 at acpi0: FN01, resource for FAN1
acpipwrres22 at acpi0: FN02, resource for FAN2
acpipwrres23 at acpi0: FN03, resource for FAN3
acpipwrres24 at acpi0: FN04, resource for FAN4
acpitz0 at acpi0: critical temperature is 119 degC
acpitz1 at acpi0: critical temperature is 119 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
acpibtn0 at acpi0: SLPB
"INT33A1" at acpi0 not configured
acpibtn1 at acpi0: PWRB
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
"PNP0C0B" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: DD1F
cpu0: using VERW MDS workaround (except on vmm entry)
cpu0: Enhanced SpeedStep 2395 MHz: speeds: 2601, 2600, 2500, 2400, 2200, 2000, 1900, 1700, 1500, 1400, 1200, 1100, 800, 700, 600, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 7G Host" rev 0x02
inteldrm0 at pci0 dev 2 function 0 "Intel HD Graphics 620" rev 0x02
drm0 at inteldrm0
inteldrm0: msi
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev 3.00/1.00 addr 1
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi, AHCI 1.3.1
ahci0: port 0: 6.0Gb/s
ahci0: port 1: 6.0Gb/s
ahci0: PHY offline on port 2
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, Samsung SSD 860, RVT4> SCSI3 0/direct fixed naa.5002538e405cebf1
sd0: 476940MB, 512 bytes/sector, 976773168 sectors, thin
sd1 at scsibus1 targ 1 lun 0: <ATA, Samsung SSD 860, RVQ0> SCSI3 0/direct fixed naa.5002538e40edbf97
sd1: 3815447MB, 512 bytes/sector, 7814037168 sectors, thin
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address 00:e0:67:17:d6:96
ppb1 at pci0 dev 28 function 1 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address 00:e0:67:17:d6:97
ppb2 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address 00:e0:67:17:d6:98
ppb3 at pci0 dev 28 function 3 "Intel 100 Series PCIE" rev 0xf1: msi
pci4 at ppb3 bus 4
em3 at pci4 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address 00:e0:67:17:d6:99
ppb4 at pci0 dev 28 function 4 "Intel 100 Series PCIE" rev 0xf1: msi
pci5 at ppb4 bus 5
em4 at pci5 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address 00:e0:67:17:d6:9a
ppb5 at pci0 dev 28 function 5 "Intel 100 Series PCIE" rev 0xf1: msi
pci6 at ppb5 bus 6
em5 at pci6 dev 0 function 0 "Intel 82583V" rev 0x00: msi, address 00:e0:67:17:d6:9b
pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21: apic 2 int 16
iic0 at ichiic0
admtemp0 at iic0 addr 0x18: Xeon
admtemp1 at iic0 addr 0x1a: Xeon
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8772F rev 1, EC port 0xa40
vmm0 at mainbus0: VMX/EPT
uhidev0 at uhub0 port 2 configuration 1 interface 0 "RDing TEMPERHUM1V1.2" rev 2.00/0.01 addr 2
uhidev0: iclass 3/1, 1 report id
ukbd0 at uhidev0 reportid 1: 8 variable keys, 5 key codes
wskbd1 at ukbd0 mux 1
uhidev1 at uhub0 port 2 configuration 1 interface 1 "RDing TEMPERHUM1V1.2" rev 2.00/0.01 addr 2
uhidev1: iclass 3/1
ugold0 at uhidev1
umbg0 at uhub0 port 3 configuration 1 interface 0 "Meinberg DCF600USB" rev 2.00/1.13 addr 3
umbg0: not synchronized, freerun
uftdi0 at uhub0 port 4 configuration 1 interface 0 "FTDI SYNLEAF - FT232R USB UART" rev 2.00/6.00 addr 4
ucom0 at uftdi0 portno 1
umass0 at uhub0 port 13 configuration 1 interface 0 "Western Digital My Passport 259D" rev 3.00/10.12 addr 5
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd2 at scsibus2 targ 1 lun 0: <WD, My Passport 259D, 1012> SCSI4 0/direct fixed
sd2: 3815415MB, 512 bytes/sector, 7813969920 sectors
ses0 at scsibus2 targ 1 lun 1: <WD, SES Device, 1012> SCSI4 13/enclosure services fixed
ses0: unable to read enclosure configuration
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
root on sd0a (aec06f0350f24bab.a) swap on sd0b dump on sd0b
ugold0: 2 sensors type si7006 (temperature and humidity)

--
>++++++++[<++++++++++>-]<+++++++.>+++[<------>-]<.>+++[<+
+++++++++++>-]<.>++[<------------>-]<+.--------------.[-]
                 http://www.weirdnet.nl/