pppoe (kernel) works but doesn't

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

pppoe (kernel) works but doesn't

georgek
This post was updated on .
CONTENTS DELETED
The author has deleted this message.
Reply | Threaded
Open this post in threaded view
|

Re: pppoe (kernel) works but doesn't

Pierre Emeriaud
Hi George,

> pppoe0: flags=8855<UP,DEBUG,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu 1492
>         priority: 0
>         dev: em0 state: session
>         sid: 0x1d1e PADI retries: 0 PADR retries: 0 time: 00:13:01
>         sppp: phase network authproto pap authname "user"
>         groups: pppoe egress
>         status: active
>         inet 10.0.128.0 --> 83.235.1.86 netmask 0xffffffff


> Despite the fact that everything seems to work OK, I can only ping
> 83.235.1.86 and nothing else. I tried pinging 8.8.8.8 or my ISP's DNS
> servers but for some reason this is not possible.

Are you sure you're not hitting some kind of walled garden? Or is the
private address from your ESX setup?

If your ISP is indeed OTE, PAP seems fine as per
http://ipv6.ote.gr/?page_id=74&lang=en, but you could try CHAP just in
case.

-pierre

Reply | Threaded
Open this post in threaded view
|

Re: pppoe (kernel) works but doesn't

georgek
Sorry for bothering you,
I had to go tcpdump the entire network "conversation" between linux and bsd
in order to find out that I had miss type my username...

Thank you for your reply Pierre nevertheless :)

P.S. This topic can be deleted



--
View this message in context: http://openbsd-archive.7691.n7.nabble.com/pppoe-kernel-works-but-doesn-t-tp292491p292510.html
Sent from the openbsd user - misc mailing list archive at Nabble.com.

Reply | Threaded
Open this post in threaded view
|

Re: pppoe (kernel) works but doesn't

georgek
In reply to this post by Pierre Emeriaud
Sorry for bothering you,
I had to go tcpdump the entire network "conversation" between linux and bsd
in order to find out that I had miss type my username...

Thank you for your reply Pierre nevertheless :)

P.S. This topic can be deleted

On Sat, Mar 26, 2016 at 1:34 PM, Pierre Emeriaud <
[hidden email]> wrote:

> Hi George,
>
> > pppoe0: flags=8855<UP,DEBUG,POINTOPOINT,RUNNING,SIMPLEX,MULTICAST> mtu
> 1492
> >         priority: 0
> >         dev: em0 state: session
> >         sid: 0x1d1e PADI retries: 0 PADR retries: 0 time: 00:13:01
> >         sppp: phase network authproto pap authname "user"
> >         groups: pppoe egress
> >         status: active
> >         inet 10.0.128.0 --> 83.235.1.86 netmask 0xffffffff
>
>
> > Despite the fact that everything seems to work OK, I can only ping
> > 83.235.1.86 and nothing else. I tried pinging 8.8.8.8 or my ISP's DNS
> > servers but for some reason this is not possible.
>
> Are you sure you're not hitting some kind of walled garden? Or is the
> private address from your ESX setup?
>
> If your ISP is indeed OTE, PAP seems fine as per
> http://ipv6.ote.gr/?page_id=74&lang=en, but you could try CHAP just in
> case.
>
> -pierre