pb après avoir quitté fvwm

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

pb après avoir quitté fvwm

Jérôme Desquilbet
Bonjour,
J'ai installé OpenBSD 5.1 sur un nouveau laptop pour essayer. Si je
lance `startx` tout va bien, fvwm (le wm par défaut) se lance. Mais
lorsque je quitte fvwm, j'ai un écran noir, je ne peux rien faire, comme
si la session X se terminait mal. Des idées d'où regarder pour avoir un
diagnostic ?
Merci, bonne journée,
   Jérôme.

________________________________
French OpenBSD mailing list
[hidden email]
http://www.openbsd-france.org/communaute.php

Reply | Threaded
Open this post in threaded view
|

Re: pb après avoir quitté fvwm

michael chlon
salut,


Personnellement, je me connecterai à une autre console(Ctrl-Alt-Fn ...)
et après t'être loggé, regarde le(s) processus qui te posent des soucis.
Avec: PS, top ...

Bon courage ,
Rgds,
Michaël C.


Le 05/10/2012 13:25, Jérôme Desquilbet a écrit :

> Bonjour,
> J'ai installé OpenBSD 5.1 sur un nouveau laptop pour essayer. Si je
> lance `startx` tout va bien, fvwm (le wm par défaut) se lance. Mais
> lorsque je quitte fvwm, j'ai un écran noir, je ne peux rien faire,
> comme si la session X se terminait mal. Des idées d'où regarder pour
> avoir un diagnostic ?
> Merci, bonne journée,
>   Jérôme.
>
> ________________________________
> French OpenBSD mailing list
> [hidden email]
> http://www.openbsd-france.org/communaute.php
>

Reply | Threaded
Open this post in threaded view
|

Re: pb après avoir quitté fvwm

Jérôme Desquilbet
>> J'ai installé OpenBSD 5.1 sur un nouveau laptop pour essayer. Si je
>> lance `startx` tout va bien, fvwm (le wm par défaut) se lance. Mais
>> lorsque je quitte fvwm, j'ai un écran noir, je ne peux rien faire,
>> comme si la session X se terminait mal. Des idées d'où regarder pour
>> avoir un diagnostic ?

> Personnellement, je me connecterai à une autre console(Ctrl-Alt-Fn ...)
> et après t'être loggé, regarde le(s) processus qui te posent des soucis.
> Avec: PS, top ...

Merci de la suggestion Michaël, mais en fait tout est bloqué, en tout
cas cette manip ne marche plus... On me suggère en privé que la carte
n'est peut-être pas supportée... Mon `dmesg` (ThinkPad X220i) plus bas...
   J.


OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012
     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz ("GenuineIntel" 686-class)
1.10 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,LAHF
real mem  = 3662856192 (3493MB)
avail mem = 3592830976 (3426MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/30/12, BIOS32 rev. 0 @ 0xfc200,
SMBIOS rev. 2.6 @ 0xdae9c000 (65 entries)
bios0: vendor LENOVO version "8DET64WW (1.34 )" date 08/31/2012
bios0: LENOVO 4290CR5
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF!
TCPA SSDT SSDT UEFI UEFI UEFI
acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4)
EHC1(S3) EHC2(S3) HDEF(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 99MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Celeron(R) CPU 847 @ 1.10GHz ("GenuineIntel" 686-class)
1.10 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,LAHF
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG_)
acpiprt2 at acpi0: bus 2 (EXP1)
acpiprt3 at acpi0: bus 3 (EXP2)
acpiprt4 at acpi0: bus 5 (EXP4)
acpiprt5 at acpi0: bus 13 (EXP5)
acpiprt6 at acpi0: bus -1 (EXP7)
acpicpu0 at acpi0: C3, C1, PSS
acpicpu1 at acpi0: C3, C1, PSS
acpipwrres0 at acpi0: PUBS
acpitz0 at acpi0: critical temperature is 99 degC
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: SLPB
acpibat0 at acpi0: BAT0 model "42T4861" serial 24388 type LION oem "SANYO"
acpibat1 at acpi0: BAT1 not present
acpiac0 at acpi0: AC unit online
acpithinkpad0 at acpi0
acpidock0 at acpi0: GDCK not docked (0)
bios0: ROM list: 0xc0000/0x10000!
cpu0: Enhanced SpeedStep 1097 MHz: speeds: 1100, 1000, 900, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
vga1 at pci0 dev 2 function 0 "Intel GT1 Video" rev 0x09
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16
drm0 at inteldrm0
"Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
f0:de:f1:a6:66:ef
ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
azalia0: codecs: Conexant/0x506e, Intel/0x2805, using Conexant/0x506e
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 16
pci1 at ppb0 bus 2
ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 17
pci2 at ppb1 bus 3
iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev 0x34:
msi, MIMO 2T2R, MoW, address 08:11:96:d1:95:24
ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 19
pci3 at ppb2 bus 5
ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: apic 2 int 16
pci4 at ppb3 bus 13
sdhc0 at pci4 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2 int 16
sdmmc0 at sdhc0
ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi,
AHCI 1.3
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZ7PA128, AXM0> SCSI3
0/direct fixed t10.ATA_SAMSUNG_MZ7PA128HMCD-010L1_S0MUNEAB908152_
sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04: apic
2 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
wsmouse1 at pms0 mux 0
pms0: Synaptics clickpad, firmware 8.0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
aps0 at isa0 port 0x1600/31
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony Electronics
Co., Ltd. Integrated Camera" rev 2.00/8.54 addr 3
video0 at uvideo0
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on sd0a (acc91f22acecd56b.a) swap on sd0b dump on sd0b

________________________________
French OpenBSD mailing list
[hidden email]
http://www.openbsd-france.org/communaute.php

Reply | Threaded
Open this post in threaded view
|

Re: pb après avoir quitté fvwm

michael chlon
Sinon, tu peux aussi, à partie d'un autre ordinateur te connecter en ssh et
voir ce qui se passe ... (les logs, dmesg ...)

Bonne chance !
Rgds,
Michaël


Le 05/10/2012 18:40, Jérôme Desquilbet a écrit :

>>> J'ai installé OpenBSD 5.1 sur un nouveau laptop pour essayer. Si je
>>> lance `startx` tout va bien, fvwm (le wm par défaut) se lance. Mais
>>> lorsque je quitte fvwm, j'ai un écran noir, je ne peux rien faire,
>>> comme si la session X se terminait mal. Des idées d'où regarder pour
>>> avoir un diagnostic ?
>
>> Personnellement, je me connecterai à une autre console(Ctrl-Alt-Fn ...)
>> et après t'être loggé, regarde le(s) processus qui te posent des soucis.
>> Avec: PS, top ...
>
> Merci de la suggestion Michaël, mais en fait tout est bloqué, en tout
> cas cette manip ne marche plus... On me suggère en privé que la carte
> n'est peut-être pas supportée... Mon `dmesg` (ThinkPad X220i) plus bas...
>   J.
>
>
> OpenBSD 5.1 (GENERIC.MP) #188: Sun Feb 12 09:55:11 MST 2012
>     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> RTC BIOS diagnostic error 80<clock_battery>
> cpu0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz ("GenuineIntel" 686-class)
> 1.10 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,LAHF
> real mem  = 3662856192 (3493MB)
> avail mem = 3592830976 (3426MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 08/30/12, BIOS32 rev. 0 @
> 0xfc200, SMBIOS rev. 2.6 @ 0xdae9c000 (65 entries)
> bios0: vendor LENOVO version "8DET64WW (1.34 )" date 08/31/2012
> bios0: LENOVO 4290CR5
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP SLIC SSDT SSDT SSDT HPET APIC MCFG ECDT ASF!
> TCPA SSDT SSDT UEFI UEFI UEFI
> acpi0: wakeup devices LID_(S3) SLPB(S3) IGBE(S4) EXP4(S4) EXP7(S4)
> EHC1(S3) EHC2(S3) HDEF(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpihpet0 at acpi0: 14318179 Hz
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 99MHz
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Celeron(R) CPU 847 @ 1.10GHz ("GenuineIntel" 686-class)
> 1.10 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,LAHF
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG_)
> acpiprt2 at acpi0: bus 2 (EXP1)
> acpiprt3 at acpi0: bus 3 (EXP2)
> acpiprt4 at acpi0: bus 5 (EXP4)
> acpiprt5 at acpi0: bus 13 (EXP5)
> acpiprt6 at acpi0: bus -1 (EXP7)
> acpicpu0 at acpi0: C3, C1, PSS
> acpicpu1 at acpi0: C3, C1, PSS
> acpipwrres0 at acpi0: PUBS
> acpitz0 at acpi0: critical temperature is 99 degC
> acpibtn0 at acpi0: LID_
> acpibtn1 at acpi0: SLPB
> acpibat0 at acpi0: BAT0 model "42T4861" serial 24388 type LION oem
> "SANYO"
> acpibat1 at acpi0: BAT1 not present
> acpiac0 at acpi0: AC unit online
> acpithinkpad0 at acpi0
> acpidock0 at acpi0: GDCK not docked (0)
> bios0: ROM list: 0xc0000/0x10000!
> cpu0: Enhanced SpeedStep 1097 MHz: speeds: 1100, 1000, 900, 800 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
> vga1 at pci0 dev 2 function 0 "Intel GT1 Video" rev 0x09
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
> inteldrm0 at vga1: apic 2 int 16
> drm0 at inteldrm0
> "Intel 6 Series MEI" rev 0x04 at pci0 dev 22 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel 82579LM" rev 0x04: msi, address
> f0:de:f1:a6:66:ef
> ehci0 at pci0 dev 26 function 0 "Intel 6 Series USB" rev 0x04: apic 2
> int 16
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 6 Series HD Audio" rev 0x04: msi
> azalia0: codecs: Conexant/0x506e, Intel/0x2805, using Conexant/0x506e
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 6 Series PCIE" rev 0xb4: apic 2
> int 16
> pci1 at ppb0 bus 2
> ppb1 at pci0 dev 28 function 1 "Intel 6 Series PCIE" rev 0xb4: apic 2
> int 17
> pci2 at ppb1 bus 3
> iwn0 at pci2 dev 0 function 0 "Intel Centrino Advanced-N 6205" rev
> 0x34: msi, MIMO 2T2R, MoW, address 08:11:96:d1:95:24
> ppb2 at pci0 dev 28 function 3 "Intel 6 Series PCIE" rev 0xb4: apic 2
> int 19
> pci3 at ppb2 bus 5
> ppb3 at pci0 dev 28 function 4 "Intel 6 Series PCIE" rev 0xb4: apic 2
> int 16
> pci4 at ppb3 bus 13
> sdhc0 at pci4 dev 0 function 0 "Ricoh 5U822 SD/MMC" rev 0x07: apic 2
> int 16
> sdmmc0 at sdhc0
> ehci1 at pci0 dev 29 function 0 "Intel 6 Series USB" rev 0x04: apic 2
> int 23
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> pcib0 at pci0 dev 31 function 0 "Intel QM67 LPC" rev 0x04
> ahci0 at pci0 dev 31 function 2 "Intel 6 Series AHCI" rev 0x04: msi,
> AHCI 1.3
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, SAMSUNG MZ7PA128, AXM0> SCSI3
> 0/direct fixed t10.ATA_SAMSUNG_MZ7PA128HMCD-010L1_S0MUNEAB908152_
> sd0: 122104MB, 512 bytes/sector, 250069680 sectors, thin
> ichiic0 at pci0 dev 31 function 3 "Intel 6 Series SMBus" rev 0x04:
> apic 2 int 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 4GB DDR3 SDRAM PC3-10600 SO-DIMM
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> wsmouse1 at pms0 mux 0
> pms0: Synaptics clickpad, firmware 8.0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> aps0 at isa0 port 0x1600/31
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> uvideo0 at uhub2 port 6 configuration 1 interface 0 "Chicony
> Electronics Co., Ltd. Integrated Camera" rev 2.00/8.54 addr 3
> video0 at uvideo0
> uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on sd0a (acc91f22acecd56b.a) swap on sd0b dump on sd0b
>
> ________________________________
> French OpenBSD mailing list
> [hidden email]
> http://www.openbsd-france.org/communaute.php
>

 
Reply | Threaded
Open this post in threaded view
|

Re: pb après avoir quitté fvwm

Eric Huiban
In reply to this post by Jérôme Desquilbet
On 10/05/12 18:40, Jérôme Desquilbet wrote:

>>> J'ai installé OpenBSD 5.1 sur un nouveau laptop pour essayer. Si je
>>> lance `startx` tout va bien, fvwm (le wm par défaut) se lance. Mais
>>> lorsque je quitte fvwm, j'ai un écran noir, je ne peux rien faire,
>>> comme si la session X se terminait mal. Des idées d'où regarder pour
>>> avoir un diagnostic ?
>
>> Personnellement, je me connecterai à une autre console(Ctrl-Alt-Fn ...)
>> et après t'être loggé, regarde le(s) processus qui te posent des soucis.
>> Avec: PS, top ...
>
> Merci de la suggestion Michaël, mais en fait tout est bloqué, en tout
> cas cette manip ne marche plus... On me suggère en privé que la carte
> n'est peut-être pas supportée... Mon `dmesg` (ThinkPad X220i) plus bas...
> J.
>

> cpu0: Intel(R) Celeron(R) CPU 847 @ 1.10GHz ("GenuineIntel" 686-class)
> 1.10 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,NXE,LONG,SSE3,PCLMUL,MWAIT,DS-CPL,VMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,SSE4.1,SSE4.2,x2APIC,POPCNT,XSAVE,LAHF

> bios0: vendor LENOVO version "8DET64WW (1.34 )" date 08/31/2012
> bios0: LENOVO 4290CR5

> pchb0 at pci0 dev 0 function 0 "Intel Core 2G Host" rev 0x09
> vga1 at pci0 dev 2 function 0 "Intel GT1 Video" rev 0x09
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
> inteldrm0 at vga1: apic 2 int 16
> drm0 at inteldrm0


Intel HD 1000 sur du H61...

J'ai in Intel HD2000 sur mon mulet (i5-2500, H67), le driver vidéo
d'X.org merdoit allégrement dans les cas d’arrêt de la video et de
passage en console classique.

t'cho!


________________________________
French OpenBSD mailing list
[hidden email]
http://www.openbsd-france.org/communaute.php