out of swap

classic Classic list List threaded Threaded
12 messages Options
Reply | Threaded
Open this post in threaded view
|

out of swap

Jan Stary
This is current/amd64. Unlike in previous versions,
some memory-heavy processes (such as in building some
big port) get killed with

        UVM: pid 11422 (cc1plus), uid 0 killed: out of swap

On this machine, I have _no_ swap. However, the machine has
1G RAM, and most of it is free in the moment this happens.

In fact, occasionaly, spawning a new xterm fails like this,
even if there is nothing else happening and there is nearly
1G of free RAM.

Has something changed in this respect?
Do I _have_ to have swap?

        Jan

OpenBSD 5.2-current (GENERIC.MP) #378: Mon Aug 20 12:55:12 MDT 2012
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 1054593024 (1005MB)
avail mem = 1004150784 (957MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe4410 (25 entries)
bios0: vendor Intel Corp. version "MOPNV10J.86A.0175.2010.0308.0620" date 03/08/2010
bios0: Intel Corporation D510MO
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET SSDT
acpi0: wakeup devices SLPB(S4) PS2M(S4) PS2K(S4) UAR1(S4) UAR2(S4) P32_(S4) ILAN(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.97 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.69 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF
cpu1: 512KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.69 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF
cpu2: 512KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.69 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF
cpu3: 512KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 5 (P32_)
acpiprt1 at acpi0: bus 0 (PCI0)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus 4 (PEX3)
acpicpu0 at acpi0: C1, PSS
acpicpu1 at acpi0: C1, PSS
acpicpu2 at acpi0: C1, PSS
acpicpu3 at acpi0: C1, PSS
acpibtn0 at acpi0: SLPB
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 8 int 16
drm0 at inteldrm0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), apic 8 int 16, address 00:27:0e:07:09:9f
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: msi
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x01
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x01: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD6400BPVT-0, 01.0> SCSI3 0/direct fixed naa.50014ee25979e46a
sd0: 610480MB, 512 bytes/sector, 1250263728 sectors
sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD10TPVT-00H, 01.0> SCSI3 0/direct fixed naa.50014ee2aed8deca
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x4e/2: W83627THF rev 0x84
lm1 at wbsio0 port 0x290/8: W83627THF
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 5 configuration 1 interface 0 "RICOH USB2.0-FLASH Media" rev 2.00/0.01 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd2 at scsibus1 targ 1 lun 0: <RICOH, R5U880FlashMedia, 0000> SCSI2 0/direct removable serial.05ca1880R5U880-00003
sd2: 15614MB, 512 bytes/sector, 31978496 sectors
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Genius Optical Mouse" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uaudio0 at uhub1 port 2 configuration 1 interface 0 "M Audio MobilePre" rev 1.10/1.03 addr 3
uaudio0: audio rev 1.00, 9 mixer controls
audio0 at uaudio0
umidi0 at uhub2 port 1 configuration 1 interface 1 "M-Audio USB Uno MIDI Interface" rev 1.00/1.25 addr 2
umidi0: (genuine USB-MIDI)
umidi0: out=1, in=1
midi0 at umidi0: <USB MIDI I/F>
ugen0 at uhub2 port 1 configuration 1 "M-Audio USB Uno MIDI Interface" rev 1.00/1.25 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd2a (9dbfde9a4bdbbac7.a) swap on sd2b dump on sd2b
midi0 detached
umidi0 detached
ugen0 detached
umidi0 at uhub2 port 2 configuration 1 interface 1 "M-Audio USB Uno MIDI Interface" rev 1.00/1.25 addr 2
umidi0: (genuine USB-MIDI)
umidi0: out=1, in=1
midi0 at umidi0: <USB MIDI I/F>
ugen0 at uhub2 port 2 configuration 1 "M-Audio USB Uno MIDI Interface" rev 1.00/1.25 addr 2
WARNING: R/W mount of /usr/ports denied.  Filesystem is not clean - run fsck
WARNING: R/W mount of /usr/src denied.  Filesystem is not clean - run fsck
WARNING: R/W mount of /usr/src denied.  Filesystem is not clean - run fsck
WARNING: R/W mount of /usr/src denied.  Filesystem is not clean - run fsck
WARNING: R/W mount of /usr/src denied.  Filesystem is not clean - run fsck
syncing disks... done
r
OpenBSD 5.2-current (RAMDISK_CD) #11: Sat Jan  5 10:10:30 MST 2013
    [hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
RTC BIOS diagnostic error 80<clock_battery>
real mem = 1054593024 (1005MB)
avail mem = 1006497792 (959MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe4410 (25 entries)
bios0: vendor Intel Corp. version "MOPNV10J.86A.0175.2010.0308.0620" date 03/08/2010
bios0: Intel Corporation D510MO
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET SSDT
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.97 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 166MHz
cpu at mainbus0: not configured
cpu at mainbus0: not configured
cpu at mainbus0: not configured
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpiprt0 at acpi0: bus 5 (P32_)
acpiprt1 at acpi0: bus 0 (PCI0)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus 4 (PEX3)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), apic 8 int 16, address 00:27:0e:07:09:9f
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: msi
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci5 at ppb4 bus 5
"Intel NM10 LPC" rev 0x01 at pci0 dev 31 function 0 not configured
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x01: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD6400BPVT-0, 01.0> SCSI3 0/direct fixed naa.50014ee25979e46a
sd0: 610480MB, 512 bytes/sector, 1250263728 sectors
sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD10TPVT-00H, 01.0> SCSI3 0/direct fixed naa.50014ee2aed8deca
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
"Intel 82801GB SMBus" rev 0x01 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
umass0 at uhub0 port 5 configuration 1 interface 0 "RICOH USB2.0-FLASH Media" rev 2.00/0.01 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd2 at scsibus1 targ 1 lun 0: <RICOH, R5U880FlashMedia, 0000> SCSI2 0/direct removable serial.05ca1880R5U880-00003
sd2: 15614MB, 512 bytes/sector, 31978496 sectors
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Genius Optical Mouse" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
uhid at uhidev0 not configured
"M Audio MobilePre" rev 1.10/1.03 addr 3 at uhub1 port 2 not configured
"M-Audio USB Uno MIDI Interface" rev 1.00/1.25 addr 2 at uhub2 port 2 not configured
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b
syncing disks... done
rebooting...
OpenBSD 5.2-current (GENERIC.MP) #11: Sat Jan  5 10:09:16 MST 2013
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 1054593024 (1005MB)
avail mem = 1004068864 (957MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe4410 (25 entries)
bios0: vendor Intel Corp. version "MOPNV10J.86A.0175.2010.0308.0620" date 03/08/2010
bios0: Intel Corporation D510MO
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET SSDT
acpi0: wakeup devices SLPB(S4) PS2M(S4) PS2K(S4) UAR1(S4) UAR2(S4) P32_(S4) ILAN(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.93 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.69 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF
cpu1: 512KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.69 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF
cpu2: 512KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.69 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF
cpu3: 512KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 5 (P32_)
acpiprt1 at acpi0: bus 0 (PCI0)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus 4 (PEX3)
acpicpu0 at acpi0: C1, PSS
acpicpu1 at acpi0: C1, PSS
acpicpu2 at acpi0: C1, PSS
acpicpu3 at acpi0: C1, PSS
acpibtn0 at acpi0: SLPB
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 8 int 16
drm0 at inteldrm0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), apic 8 int 16, address 00:27:0e:07:09:9f
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: msi
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x01
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x01: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD6400BPVT-0, 01.0> SCSI3 0/direct fixed naa.50014ee25979e46a
sd0: 610480MB, 512 bytes/sector, 1250263728 sectors
sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD10TPVT-00H, 01.0> SCSI3 0/direct fixed naa.50014ee2aed8deca
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x4e/2: W83627THF rev 0x84
lm1 at wbsio0 port 0x290/8: W83627THF
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 5 configuration 1 interface 0 "RICOH USB2.0-FLASH Media" rev 2.00/0.01 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd2 at scsibus1 targ 1 lun 0: <RICOH, R5U880FlashMedia, 0000> SCSI2 0/direct removable serial.05ca1880R5U880-00003
sd2: 15614MB, 512 bytes/sector, 31978496 sectors
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Genius Optical Mouse" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uaudio0 at uhub1 port 2 configuration 1 interface 0 "M Audio MobilePre" rev 1.10/1.03 addr 3
uaudio0: audio rev 1.00, 9 mixer controls
audio0 at uaudio0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd2a (9dbfde9a4bdbbac7.a) swap on sd2b dump on sd2b
syncing disks... done
r
OpenBSD 5.2-current (GENERIC.MP) #11: Sat Jan  5 10:09:16 MST 2013
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 1054593024 (1005MB)
avail mem = 1004068864 (957MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe4410 (25 entries)
bios0: vendor Intel Corp. version "MOPNV10J.86A.0175.2010.0308.0620" date 03/08/2010
bios0: Intel Corporation D510MO
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET SSDT
acpi0: wakeup devices SLPB(S4) PS2M(S4) PS2K(S4) UAR1(S4) UAR2(S4) P32_(S4) ILAN(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.98 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.69 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF
cpu1: 512KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.69 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF
cpu2: 512KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.69 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF
cpu3: 512KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 5 (P32_)
acpiprt1 at acpi0: bus 0 (PCI0)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus 4 (PEX3)
acpicpu0 at acpi0: C1, PSS
acpicpu1 at acpi0: C1, PSS
acpicpu2 at acpi0: C1, PSS
acpicpu3 at acpi0: C1, PSS
acpibtn0 at acpi0: SLPB
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 8 int 16
drm0 at inteldrm0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), apic 8 int 16, address 00:27:0e:07:09:9f
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: msi
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x01
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x01: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD6400BPVT-0, 01.0> SCSI3 0/direct fixed naa.50014ee25979e46a
sd0: 610480MB, 512 bytes/sector, 1250263728 sectors
sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD10TPVT-00H, 01.0> SCSI3 0/direct fixed naa.50014ee2aed8deca
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x4e/2: W83627THF rev 0x84
lm1 at wbsio0 port 0x290/8: W83627THF
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 5 configuration 1 interface 0 "RICOH USB2.0-FLASH Media" rev 2.00/0.01 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd2 at scsibus1 targ 1 lun 0: <RICOH, R5U880FlashMedia, 0000> SCSI2 0/direct removable serial.05ca1880R5U880-00003
sd2: 15614MB, 512 bytes/sector, 31978496 sectors
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Genius Optical Mouse" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uaudio0 at uhub1 port 2 configuration 1 interface 0 "M Audio MobilePre" rev 1.10/1.03 addr 3
uaudio0: audio rev 1.00, 9 mixer controls
audio0 at uaudio0
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd2a (9dbfde9a4bdbbac7.a) swap on sd2b dump on sd2b
umidi0 at uhub2 port 2 configuration 1 interface 1 "M-Audio USB Uno MIDI Interface" rev 1.00/1.25 addr 2
umidi0: (genuine USB-MIDI)
umidi0: out=1, in=1
midi0 at umidi0: <USB MIDI I/F>
ugen0 at uhub2 port 2 configuration 1 "M-Audio USB Uno MIDI Interface" rev 1.00/1.25 addr 2
uid 1000 on /tmp: file system full
uid 1000 on /tmp: file system full
uid 1000 on /tmp: file system full
uid 1000 on /tmp: file system full
uid 1000 on /tmp: file system full
uid 1000 on /tmp: file system full
uid 1000 on /tmp: file system full
UVM: pid 8271 (cc1plus), uid 0 killed: out of swap
UVM: pid 26628 (cc1plus), uid 0 killed: out of swap
UVM: pid 8226 (cc1plus), uid 0 killed: out of swap
syncing disks... done
r
OpenBSD 5.2-current (GENERIC.MP) #11: Sat Jan  5 10:09:16 MST 2013
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
real mem = 1054593024 (1005MB)
avail mem = 1004068864 (957MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xe4410 (25 entries)
bios0: vendor Intel Corp. version "MOPNV10J.86A.0175.2010.0308.0620" date 03/08/2010
bios0: Intel Corporation D510MO
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S4 S5
acpi0: tables DSDT FACP APIC MCFG HPET SSDT
acpi0: wakeup devices SLPB(S4) PS2M(S4) PS2K(S4) UAR1(S4) UAR2(S4) P32_(S4) ILAN(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) AZAL(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.97 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.69 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF
cpu1: 512KB 64b/line 8-way L2 cache
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.69 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF
cpu2: 512KB 64b/line 8-way L2 cache
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Atom(TM) CPU D510 @ 1.66GHz, 1666.69 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF,PERF
cpu3: 512KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
acpimcfg0 at acpi0 addr 0xf8000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 5 (P32_)
acpiprt1 at acpi0: bus 0 (PCI0)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus 4 (PEX3)
acpicpu0 at acpi0: C1, PSS
acpicpu1 at acpi0: C1, PSS
acpicpu2 at acpi0: C1, PSS
acpicpu3 at acpi0: C1, PSS
acpibtn0 at acpi0: SLPB
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 8 int 16
drm0 at inteldrm0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: msi
pci1 at ppb0 bus 1
re0 at pci1 dev 0 function 0 "Realtek 8168" rev 0x03: RTL8168D/8111D (0x2800), apic 8 int 16, address 00:27:0e:07:09:9f
rgephy0 at re0 phy 7: RTL8169S/8110S PHY, rev. 2
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: msi
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x01: msi
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: msi
pci4 at ppb3 bus 4
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int 23
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int 19
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int 18
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int 16
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int 23
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci5 at ppb4 bus 5
pcib0 at pci0 dev 31 function 0 "Intel NM10 LPC" rev 0x01
ahci0 at pci0 dev 31 function 2 "Intel 82801GR AHCI" rev 0x01: msi, AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD6400BPVT-0, 01.0> SCSI3 0/direct fixed naa.50014ee25979e46a
sd0: 610480MB, 512 bytes/sector, 1250263728 sectors
sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD10TPVT-00H, 01.0> SCSI3 0/direct fixed naa.50014ee2aed8deca
sd1: 953869MB, 512 bytes/sector, 1953525168 sectors
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 8 int 19
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-6400CL5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x4e/2: W83627THF rev 0x84
lm1 at wbsio0 port 0x290/8: W83627THF
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 5 configuration 1 interface 0 "RICOH USB2.0-FLASH Media" rev 2.00/0.01 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd2 at scsibus1 targ 1 lun 0: <RICOH, R5U880FlashMedia, 0000> SCSI2 0/direct removable serial.05ca1880R5U880-00003
sd2: 15614MB, 512 bytes/sector, 31978496 sectors
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Genius Optical Mouse" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
uaudio0 at uhub1 port 2 configuration 1 interface 0 "M Audio MobilePre" rev 1.10/1.03 addr 3
uaudio0: audio rev 1.00, 9 mixer controls
audio0 at uaudio0
umidi0 at uhub2 port 2 configuration 1 interface 1 "M-Audio USB Uno MIDI Interface" rev 1.00/1.25 addr 2
umidi0: (genuine USB-MIDI)
umidi0: out=1, in=1
midi0 at umidi0: <USB MIDI I/F>
ugen0 at uhub2 port 2 configuration 1 "M-Audio USB Uno MIDI Interface" rev 1.00/1.25 addr 2
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd2a (9dbfde9a4bdbbac7.a) swap on sd2b dump on sd2b
UVM: pid 17950 (cc1plus), uid 0 killed: out of swap
UVM: pid 11442 (cc1plus), uid 0 killed: out of swap

Reply | Threaded
Open this post in threaded view
|

Re: out of swap

Otto Moerbeek
On Mon, Jan 07, 2013 at 01:27:35PM +0100, Jan Stary wrote:

> This is current/amd64. Unlike in previous versions,
> some memory-heavy processes (such as in building some
> big port) get killed with
>
> UVM: pid 11422 (cc1plus), uid 0 killed: out of swap
>
> On this machine, I have _no_ swap. However, the machine has
> 1G RAM, and most of it is free in the moment this happens.
>
> In fact, occasionaly, spawning a new xterm fails like this,
> even if there is nothing else happening and there is nearly
> 1G of free RAM.
>
> Has something changed in this respect?
> Do I _have_ to have swap?

[snip]

> UVM: pid 17950 (cc1plus), uid 0 killed: out of swap
> UVM: pid 11442 (cc1plus), uid 0 killed: out of swap

cc1plus is known to require vast ammounts of memory in some cases.  It
is likely you *are* running out of swap.

        -Otto

Reply | Threaded
Open this post in threaded view
|

Re: out of swap

Marc Espie-2
In reply to this post by Jan Stary
On Mon, Jan 07, 2013 at 01:27:35PM +0100, Jan Stary wrote:

> This is current/amd64. Unlike in previous versions,
> some memory-heavy processes (such as in building some
> big port) get killed with
>
> UVM: pid 11422 (cc1plus), uid 0 killed: out of swap
>
> On this machine, I have _no_ swap. However, the machine has
> 1G RAM, and most of it is free in the moment this happens.
>
> In fact, occasionaly, spawning a new xterm fails like this,
> even if there is nothing else happening and there is nearly
> 1G of free RAM.
>
> Has something changed in this respect?
> Do I _have_ to have swap?

1G of ram is definitely not enough to build large ports on amd64.
Everything mozilla-related, for instance, goes up to 2G and more
while linking.

Reply | Threaded
Open this post in threaded view
|

Re: out of swap

Amit Kulkarni-5
>> This is current/amd64. Unlike in previous versions,
>> some memory-heavy processes (such as in building some
>> big port) get killed with
>>
>>       UVM: pid 11422 (cc1plus), uid 0 killed: out of swap
>>
>> On this machine, I have _no_ swap. However, the machine has
>> 1G RAM, and most of it is free in the moment this happens.
>>
>> In fact, occasionaly, spawning a new xterm fails like this,
>> even if there is nothing else happening and there is nearly
>> 1G of free RAM.
>>
>> Has something changed in this respect?
>> Do I _have_ to have swap?
>
> 1G of ram is definitely not enough to build large ports on amd64.
> Everything mozilla-related, for instance, goes up to 2G and more
> while linking.
>

I ran into /etc/login.conf limits of datasize = 512M way before
hitting any other limit, so is that bumped?

Reply | Threaded
Open this post in threaded view
|

Re: out of swap

Theo de Raadt
> I ran into /etc/login.conf limits of datasize = 512M way before
> hitting any other limit, so is that bumped?

that is for one process.

Reply | Threaded
Open this post in threaded view
|

Re: out of swap

Jan Stary
On Jan 07 13:27:35, [hidden email] wrote:

> This is current/amd64. Unlike in previous versions,
> some memory-heavy processes (such as in building some
> big port) get killed with
>
> UVM: pid 11422 (cc1plus), uid 0 killed: out of swap
>
> On this machine, I have _no_ swap. However, the machine has
> 1G RAM, and most of it is free in the moment this happens.
>
> In fact, occasionaly, spawning a new xterm fails like this,
> even if there is nothing else happening and there is nearly
> 1G of free RAM.
>
> Has something changed in this respect?
> Do I _have_ to have swap?

On Jan 07 13:34:10, [hidden email] wrote:
> > UVM: pid 17950 (cc1plus), uid 0 killed: out of swap
> > UVM: pid 11442 (cc1plus), uid 0 killed: out of swap
> cc1plus is known to require vast ammounts of memory in some cases.  It
> is likely you *are* running out of swap.

On Jan 07 14:03:08, [hidden email] wrote:
> 1G of ram is definitely not enough to build large ports on amd64.
> Everything mozilla-related, for instance, goes up to 2G and more
> while linking.

This was indeed a build of gtk+3.

On Jan 07 07:59:46, [hidden email] wrote:
> I ran into /etc/login.conf limits of datasize = 512M way before
> hitting any other limit, so is that bumped?

This was running as root, who is staff:

staff:\
        :datasize-cur=800M:\
        :datasize-max=infinity:\
        :maxproc-max=512:\
        :maxproc-cur=128:\
        :ignorenologin:\
        :requirehome@:\
        :tc=default:

Reply | Threaded
Open this post in threaded view
|

Re: out of swap

Jan Stary
On Jan 07 15:14:21, [hidden email] wrote:

> On Jan 07 13:27:35, [hidden email] wrote:
> > This is current/amd64. Unlike in previous versions,
> > some memory-heavy processes (such as in building some
> > big port) get killed with
> >
> > UVM: pid 11422 (cc1plus), uid 0 killed: out of swap
> >
> > On this machine, I have _no_ swap. However, the machine has
> > 1G RAM, and most of it is free in the moment this happens.
> >
> > In fact, occasionaly, spawning a new xterm fails like this,
> > even if there is nothing else happening and there is nearly
> > 1G of free RAM.
> >
> > Has something changed in this respect?
> > Do I _have_ to have swap?
>
> On Jan 07 13:34:10, [hidden email] wrote:
> > > UVM: pid 17950 (cc1plus), uid 0 killed: out of swap
> > > UVM: pid 11442 (cc1plus), uid 0 killed: out of swap
> > cc1plus is known to require vast ammounts of memory in some cases.  It
> > is likely you *are* running out of swap.
>
> On Jan 07 14:03:08, [hidden email] wrote:
> > 1G of ram is definitely not enough to build large ports on amd64.
> > Everything mozilla-related, for instance, goes up to 2G and more
> > while linking.
>
> This was indeed a build of gtk+3.
>
> On Jan 07 07:59:46, [hidden email] wrote:
> > I ran into /etc/login.conf limits of datasize = 512M way before
> > hitting any other limit, so is that bumped?
>
> This was running as root, who is staff:

No, sorry; root is in the daemon class:

daemon:\
        :ignorenologin:\
        :datasize=infinity:\
        :maxproc=infinity:\
        :openfiles-cur=128:\
        :stacksize-cur=8M:\
        :localcipher=blowfish,8:\
        :tc=default:

Reply | Threaded
Open this post in threaded view
|

Re: out of swap

Marc Espie-2
On Mon, Jan 07, 2013 at 03:38:37PM +0100, Jan Stary wrote:

> On Jan 07 15:14:21, [hidden email] wrote:
> > On Jan 07 13:27:35, [hidden email] wrote:
> > > This is current/amd64. Unlike in previous versions,
> > > some memory-heavy processes (such as in building some
> > > big port) get killed with
> > >
> > > UVM: pid 11422 (cc1plus), uid 0 killed: out of swap
> > >
> > > On this machine, I have _no_ swap. However, the machine has
> > > 1G RAM, and most of it is free in the moment this happens.
^^^^^^^^^^^^^^^^^^

> > > In fact, occasionaly, spawning a new xterm fails like this,
> > > even if there is nothing else happening and there is nearly
> > > 1G of free RAM.
> > >
> > > Has something changed in this respect?
> > > Do I _have_ to have swap?

> No, sorry; root is in the daemon class:
>
> daemon:\
> :ignorenologin:\
> :datasize=infinity:\
> :maxproc=infinity:\
> :openfiles-cur=128:\
> :stacksize-cur=8M:\
> :localcipher=blowfish,8:\
> :tc=default:

who cares ? the limiting factor here is 1G of memory.

keep in mind that 64 bits ~= twice the size for some things, which
include compiling and linking code.

There are lots of *large* stragglers in the ports tree that won't
compile within 1G of memory, heck, they can go over 2G in some
cases (landry@ is starting to hit hard limits on some 32 bit machines,
for instance).

Theo is right: a *huge* default limit *for every normal process* is
wrong.

But compiling big ports is not normal. :)

For starters, you could use the provided snapshots. If you don't, you're
supposed to know what you're doing (obviously, there's something missing
there).

Heck, I even added a few paragraphs about bulk build hints to ports(7)
recently.

You could also question whether it's reasonable to need THAT much memory
to compile and link that code. Unfortunately, we're stuck with the tools
that exist. Developping a more efficient compiler+linker is a *huge*
adventure...

oh, and most people out there *won't even care*. If you whine that you
can't compile stuff with your 1G of memory, a lot of developers will
laugh at the puny amount of memory you have on your development machine.
Sad but true...

Reply | Threaded
Open this post in threaded view
|

Re: out of swap

Jan Stary
On Jan 07 17:09:16, [hidden email] wrote:

> who cares ? the limiting factor here is 1G of memory.
>
> keep in mind that 64 bits ~= twice the size for some things, which
> include compiling and linking code.
>
> There are lots of *large* stragglers in the ports tree that won't
> compile within 1G of memory, heck, they can go over 2G in some
> cases (landry@ is starting to hit hard limits on some 32 bit machines,
> for instance).
>
> Theo is right: a *huge* default limit *for every normal process* is
> wrong.
>
> But compiling big ports is not normal. :)

Right.

> For starters, you could use the provided snapshots. If you don't,

I use snapshots and prebuilt packages whenever I can.
Compiling this was a workaround -

> you're
> supposed to know what you're doing (obviously, there's something missing
> there).

Yesterday's current/amd64, as mirrored at
ftp://ftp5.eu.openbsd.org/pub/OpenBSD/snapshots/amd64/
has sets from Jan 5 and x*-sets from Jan 4. I'm not sure
if that is the reason, but the obligate pkg_add -ui says

  Can't install gtk+3-3.6.3 because of libraries
  |library freetype.19.0 not found
  | /usr/X11R6/lib/libfreetype.so.17.2 (system): bad major
  | /usr/X11R6/lib/libfreetype.so.18.0 (system): bad major
  | /usr/X11R6/lib/libfreetype.so.18.1 (system): bad major
  | /usr/X11R6/lib/libfreetype.so.18.2 (system): bad major
  | /usr/X11R6/lib/libfreetype.so.18.3 (system): bad major
 
That's why I am bulding it from ports
(and getting the out-of-swap errors).

I don't mind waiting for a newer freetype or rebulding xenocara.
I was just confused by the swap messages, which seems to be
explained now. Thanks.

> Heck, I even added a few paragraphs about bulk build hints to ports(7)
> recently.

Time for me to re-read then.

> You could also question whether it's reasonable to need THAT much memory
> to compile and link that code. Unfortunately, we're stuck with the tools
> that exist. Developping a more efficient compiler+linker is a *huge*
> adventure...

No doubt.

> oh, and most people out there *won't even care*. If you whine that you
> can't compile stuff with your 1G of memory, a lot of developers will
> laugh at the puny amount of memory you have on your development machine.

I just didn't know that 1G of RAM that my machine has (laugh away)
is not enough for compiling _those_ ports, and that in fact I *will*
be hitting (my nonexistent) swap, as Otto explained.
Now I do. Thank you.

Reply | Threaded
Open this post in threaded view
|

Re: out of swap

Jan Stary
>   Can't install gtk+3-3.6.3 because of libraries
>   |library freetype.19.0 not found
>   | /usr/X11R6/lib/libfreetype.so.17.2 (system): bad major
>   | /usr/X11R6/lib/libfreetype.so.18.0 (system): bad major
>   | /usr/X11R6/lib/libfreetype.so.18.1 (system): bad major
>   | /usr/X11R6/lib/libfreetype.so.18.2 (system): bad major
>   | /usr/X11R6/lib/libfreetype.so.18.3 (system): bad major
>  
> That's why I am bulding it from ports
> (and getting the out-of-swap errors).
>
> I don't mind waiting for a newer freetype or rebulding xenocara.

Right, the rebuilt xenocara (unlike the current x* sets)
provides freetype.so.19 and gtk+3 and everything above is happy
via pkg_add -ui.

Reply | Threaded
Open this post in threaded view
|

Re: out of swap

Bryan Brake
In reply to this post by Jan Stary
Would http://www.openbsd.org/faq/faq14.html#Swap fix your issue?
 Specifically, section 14.5.3 where you create a swap space and add it to
your swap pool?


On Mon, Jan 7, 2013 at 10:44 AM, Jan Stary <[hidden email]> wrote:

> On Jan 07 17:09:16, [hidden email] wrote:
> > who cares ? the limiting factor here is 1G of memory.
> >
> > keep in mind that 64 bits ~= twice the size for some things, which
> > include compiling and linking code.
> >
> > There are lots of *large* stragglers in the ports tree that won't
> > compile within 1G of memory, heck, they can go over 2G in some
> > cases (landry@ is starting to hit hard limits on some 32 bit machines,
> > for instance).
> >
> > Theo is right: a *huge* default limit *for every normal process* is
> > wrong.
> >
> > But compiling big ports is not normal. :)
>
> Right.
>
> > For starters, you could use the provided snapshots. If you don't,
>
> I use snapshots and prebuilt packages whenever I can.
> Compiling this was a workaround -
>
> > you're
> > supposed to know what you're doing (obviously, there's something missing
> > there).
>
> Yesterday's current/amd64, as mirrored at
> ftp://ftp5.eu.openbsd.org/pub/OpenBSD/snapshots/amd64/
> has sets from Jan 5 and x*-sets from Jan 4. I'm not sure
> if that is the reason, but the obligate pkg_add -ui says
>
>   Can't install gtk+3-3.6.3 because of libraries
>   |library freetype.19.0 not found
>   | /usr/X11R6/lib/libfreetype.so.17.2 (system): bad major
>   | /usr/X11R6/lib/libfreetype.so.18.0 (system): bad major
>   | /usr/X11R6/lib/libfreetype.so.18.1 (system): bad major
>   | /usr/X11R6/lib/libfreetype.so.18.2 (system): bad major
>   | /usr/X11R6/lib/libfreetype.so.18.3 (system): bad major
>
> That's why I am bulding it from ports
> (and getting the out-of-swap errors).
>
> I don't mind waiting for a newer freetype or rebulding xenocara.
> I was just confused by the swap messages, which seems to be
> explained now. Thanks.
>
> > Heck, I even added a few paragraphs about bulk build hints to ports(7)
> > recently.
>
> Time for me to re-read then.
>
> > You could also question whether it's reasonable to need THAT much memory
> > to compile and link that code. Unfortunately, we're stuck with the tools
> > that exist. Developping a more efficient compiler+linker is a *huge*
> > adventure...
>
> No doubt.
>
> > oh, and most people out there *won't even care*. If you whine that you
> > can't compile stuff with your 1G of memory, a lot of developers will
> > laugh at the puny amount of memory you have on your development machine.
>
> I just didn't know that 1G of RAM that my machine has (laugh away)
> is not enough for compiling _those_ ports, and that in fact I *will*
> be hitting (my nonexistent) swap, as Otto explained.
> Now I do. Thank you.

Reply | Threaded
Open this post in threaded view
|

Re: out of swap

Jan Stary
On Jan 07 14:13:15, [hidden email] wrote:
> Would http://www.openbsd.org/faq/faq14.html#Swap fix your issue?
>  Specifically, section 14.5.3 where you create a swap space and add it to
> your swap pool?

The "issue" here was my ignorance of the _need_ for more RAM or swap.
It's resolved.