old SoundblasterPro in laptop

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

old SoundblasterPro in laptop

Chris Bennett-11
I bought a very old laptop after mine gave up.

At first I got a dmesg entry opl not configured

After fixing BIOS to:

WSS I/O Address = 530H
SBPro I/O Address = 240H
Synthesizer I/O Address = 388H
WSS & SBPro & MPU401 IRQ Level
= IRQ7
WSS(Play) DMA = Channel 0
WSS(Rec.) & SBPro DMA = Channel 1
Control I/O Address = 538H
MPU401 (MIDI I/F) = 330H

I get a normal dmesg.

But if I try to play any sound, I get a blah blah blah blah sound that
can only be stopped by a full shutdown (no processes running).

As root, I get no sound at all.

Any advice?

OpenBSD 5.1-current (GENERIC) #213: Thu May 17 10:41:42 MDT 2012
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
    cpu0: Intel Celeron ("GenuineIntel" 686-class, 256KB L2 cache) 194
    MHz
    cpu0:
    FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PSE36,MMX,FXSR
    real mem  = 200798208 (191MB)
    avail mem = 186695680 (178MB)
    mainbus0 at root
    bios0 at mainbus0: AT/286+ BIOS, date 07/09/99, BIOS32 rev. 0 @
    0xfc510
    apm0 at bios0: Power Management spec V1.2
    pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
    pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf0f90/128 (6 entries)
    pcibios0: PCI Interrupt Router at 000:05:0 ("Intel 82371FB ISA" rev
    0x00)
    pcibios0: PCI bus #21 is the last bus
    bios0: ROM list: 0xc0000/0xc000 0xe8000/0x4000!
    cpu0 at mainbus0: (uniprocessor)
    pci0 at mainbus0 bus 0: configuration mode 1 (bios)
    pchb0 at pci0 dev 0 function 0 "Intel 82443BX" rev 0x03
    vga1 at pci0 dev 4 function 0 "Neomagic Magicgraph NM2200" rev 0x12
    wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
    wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
    piixpcib0 at pci0 dev 5 function 0 "Intel 82371AB PIIX4 ISA" rev
    0x02
    pciide0 at pci0 dev 5 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
    channel 0 wired to compatibility, channel 1 wired to compatibility
    wd0 at pciide0 channel 0 drive 0: <IC25T048ATDA05-0>
    wd0: 16-sector PIO, LBA, 45780MB, 93759120 sectors
    wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
    atapiscsi0 at pciide0 channel 1 drive 0
    scsibus0 at atapiscsi0: 2 targets
    cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 7.5B> ATAPI 5/cdrom
    removable
    cd0(pciide0:1:0): using PIO mode 4, DMA mode 2
    uhci0 at pci0 dev 5 function 2 "Intel 82371AB USB" rev 0x01: irq 11
    piixpm0 at pci0 dev 5 function 3 "Intel 82371AB Power" rev 0x02: SMI
    iic0 at piixpm0
    admtemp0 at iic0 addr 0x4e: adm1021
    spdmem0 at iic0 addr 0x50: 64MB SDRAM non-parity PC66CL2
    "Toshiba Fast Infrared Type O" rev 0x23 at pci0 dev 9 function 0 not
    configured
    cbb0 at pci0 dev 11 function 0 "Toshiba ToPIC97 CardBus" rev 0x05:
    irq 11
    cbb1 at pci0 dev 11 function 1 "Toshiba ToPIC97 CardBus" rev 0x05:
    irq 11
    isa0 at piixpcib0
    isadma0 at isa0
    com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
    com1 at isa0 port 0x2f8/8 irq 3: ns8250, no fifo
    pckbc0 at isa0 port 0x60/5
    pms0 at pckbc0 (aux slot)
    pckbc0: using irq 12 for aux slot
    wsmouse0 at pms0 mux 0
    pckbd0 at pckbc0 (kbd slot)
    pckbc0: using irq 1 for kbd slot
    wskbd0 at pckbd0: console keyboard, using wsdisplay0
    wss0 at isa0 port 0x530/8 irq 10 drq 0: CS4231 or AD1845 (vers 4)
    audio0 at wss0
    pcppi0 at isa0 port 0x61
    spkr0 at pcppi0
    npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
    fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
    usb0 at uhci0: USB revision 1.0
    uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
    cardslot0 at cbb0 slot 0 flags 0
    cardbus0 at cardslot0: bus 20 device 0 cacheline 0x0, lattimer 0x0
    pcmcia0 at cardslot0
    cardslot1 at cbb1 slot 1 flags 0
    cardbus1 at cardslot1: bus 21 device 0 cacheline 0x0, lattimer 0x0
    pcmcia1 at cardslot1
    mtrr: Pentium Pro MTRR support
    vscsi0 at root
    scsibus1 at vscsi0: 256 targets
    softraid0 at root
    scsibus2 at softraid0: 256 targets
    root on wd0a (1effc3e46946b8f4.a) swap on wd0b dump on wd0b
    ath0 at cardbus0 dev 0 function 0 "Atheros AR5212" rev 0x01: irq 11
    ath0: AR5213 5.6 phy 4.1 rf2112a 4.6, FCC1A, address
    00:0d:88:a5:15:0a


    inputs.mic=0,0 volume
    inputs.mic.mute=off  [ off on ]
    inputs.cd=220,220 volume
    inputs.cd.mute=off  [ off on ]
    inputs.dac=220,220 volume
    inputs.dac.mute=off  [ off on ]
    record.record=220,220 volume
    record.record.source=mic  [ mic cd dac ]
    monitor.monitor=0 volume
    name=wss,ad1848
    version=
    config=WSS
    encodings=mulaw:8:1:1,alaw:8:1:1,slinear_le:16:2:1,ulinear:8:1:1,slinear_be:16:2:1*,slinear:8:1:1*,ulinear_le:16:2:1*,ulinear_be:16:2:1*
    properties=mmap
    full_duplex=0
    fullduplex=0
    blocksize=3840
    hiwat=9
    lowat=8
    output_muted=0
    monitor_gain=0
    mode=play
    play.rate=48000
    play.sample_rate=48000
    play.channels=2
    play.precision=8
    play.bps=1
    play.msb=1
    play.encoding=slinear_le
    play.gain=220
    play.balance=32
    play.port=0x0
    play.avail_ports=0x0
    play.seek=0
    play.samples=0
    play.eof=0
    play.pause=0
    play.error=0
    play.waiting=0
    play.open=1
    play.active=0
    play.buffer_size=65536
    play.block_size=3840
    play.errors=0
    record.rate=48000
    record.sample_rate=48000
    record.channels=2
    record.precision=8
    record.bps=1
    record.msb=1
    record.encoding=slinear_le
    record.gain=0
    record.balance=32
    record.port=0x1
    record.avail_ports=0x5
    record.seek=0
    record.samples=0
    record.eof=0
    record.pause=0
    record.error=0
    record.waiting=0
    record.open=0
    record.active=0
    record.buffer_size=65536
    record.block_size=400
    record.errors=0

    [/usr/obj/mpg123-1.14.2/mpg123-1.14.2/src/audio.c:630] error: failed
    to open audio device
    [/usr/obj/mpg123-1.14.2/mpg123-1.14.2/src/audio.c:180] error: Unable
    to find a working output module in this list: sndio
    [/usr/obj/mpg123-1.14.2/mpg123-1.14.2/src/audio.c:532] error: Failed
    to open audio output module
    [/usr/obj/mpg123-1.14.2/mpg123-1.14.2/src/mpg123.c:897] error:
    Failed to initialize output, goodbye.