(no subject)

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

(no subject)

Patsy
Hello,
I try to boot the bsd.mp kernel (from OpenBSD 3.8) and I get a panic. I
used
'script -a' on a seperate laptop and used tip to capture the boot
messages, which are included in the attachment. I can't find any
information about this, so I thought a bug report would be most
appropriate. I'm rather clueless about kernels+programming unfortunately,
though if I do anything to help I'd be happy to.

Regards
Patsy
Script started on Mon Jan 30 08:50:10 2006

puff# jn  ^C



puff# ^C



puff# #^D


puff# #^ZScript started on Mon Jan 30 08:50:59 2006

puff# tip tty00


connected





puff# ^C



puff# ^Z^A^D


puff# ^A^C



puff# ^X^Z>> OpenBSD/i386 BOOT 2.10


boot> ffds    boot wd0a:/bsd.mp


booting wd0a:/bsd.mp: \|/-\4846336|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\+944176 [52+249680|/-\|/-\|/-\|/-\+230986|/-\|/-\|/-\|/]=0x5fb274


entry point at 0x100120





[ using 481092 bytes of bsd ELF symbol table ]


Copyright (c) 1982, 1986, 1989, 1991, 1993


        The Regents of the University of California.  All rights reserved.


Copyright (c) 1995-2005 OpenBSD. All rights reserved.  http://www.OpenBSD.org





OpenBSD 3.8 (GENERIC.MP) #298: Sat Sep 10 15:51:54 MDT 2005


    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP


cpu0: Intel Pentium III ("GenuineIntel" 686-class) 867 MHz


cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE


real mem  = 1073258496 (1048104K)


avail mem = 972668928 (949872K)


using 4278 buffers containing 53764096 bytes (52504K) of memory


mainbus0 (root)


bios0 at mainbus0: AT/286+(30) BIOS, date 11/20/00, BIOS32 rev. 0 @ 0xfd8b0


apm0 at bios0: Power Management spec V1.2


apm0: AC on, battery charge unknown


apm0: flags 30102 dobusy 0 doidle 1


pcibios0 at bios0: rev 2.1 @ 0xfd8b0/0x750


pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdef0/240 (13 entries)


pcibios0: PCI Exclusive IRQs: 9


pcibios0: no compatible PCI ICU found: ICU vendor 0xffff product 0xffff


pcibios0: Warning, unable to fix up PCI interrupt routing


pcibios0: PCI bus #1 is the last bus


bios0: ROM list: 0xc0000/0xa800 0xca800/0x800 0xcb000/0x4200


mainbus0: Intel MP Specification (Version 1.4) (HP       E 800       )


cpu0 at mainbus0: apid 3 (boot processor)


cpu0: apic clock running at 133 MHz


cpu1 at mainbus0: apid 0 (application processor)


cpu1: Intel Pentium III ("GenuineIntel" 686-class) 867 MHz


cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR,SSE


mainbus0: bus 0 is type PCI  


mainbus0: bus 1 is type PCI  


mainbus0: bus 2 is type PCI  


mainbus0: bus 3 is type PCI  


mainbus0: bus 4 is type PCI  


mainbus0: bus 5 is type PCI  


mainbus0: bus 6 is type PCI  


mainbus0: bus 7 is type PCI  


mainbus0: bus 8 is type ISA  


ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 16 pins


ioapic1 at mainbus0: apid 2 pa 0xfec01000, version 11, 16 pins


pci0 at mainbus0 bus 0: configuration mode 1 (no bios)


pchb0 at pci0 dev 0 function 0 "ServerWorks CNB20LE Host" rev 0x06


pchb1 at pci0 dev 0 function 1 "ServerWorks CNB20LE Host" rev 0x06


pci1 at pchb1 bus 5


emu0 at pci1 dev 2 function 0 "Creative Labs SoundBlaster Live" rev 0x07: apic 2 int 5 (irq 12)


ac97: codec id 0x54524123 (TriTech Microelectronics TR28602)


audio0 at emu0


"Creative Labs PCI Gameport Joystick" rev 0x07 at pci1 dev 2 function 1 not configured


pciide0 at pci1 dev 3 function 0 "CMD Technology PCI0680" rev 0x02


pciide0: bus-master DMA support present


pciide0: channel 0 configured to native-PCI mode


pciide0: using apic 2 int 6 (irq 9) for native-PCI interrupt


wd0 at pciide0 channel 0 drive 0: <Maxtor 6E040L0>


wd0: 16-sector PIO, LBA, 39205MB, 80293248 sectors


wd1 at pciide0 channel 0 drive 1: <Maxtor 6L120P0>


wd1: 16-sector PIO, LBA, 117246MB, 240121728 sectors


wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5


wd1(pciide0:0:1): using PIO mode 4, Ultra-DMA mode 5


pciide0: channel 1 configured to native-PCI mode


rl0 at pci1 dev 4 function 0 "Realtek 8139" rev 0x10: apic 2 int 7 (irq 9) address 00:08:54:3b:77:e4


rlphy0 at rl0 phy 0: RTL internal phy


siop0 at pci1 dev 5 function 0 "Symbios Logic 53c896" rev 0x07: apic 2 int 8 (irq 9), using 8K of on-board RAM


scsibus0 at siop0: 16 targets


siop1 at pci1 dev 5 function 1 "Symbios Logic 53c896" rev 0x07: apic 2 int 9 (irq 11), using 8K of on-board RAM


scsibus1 at siop1: 16 targets


fxp0 at pci0 dev 2 function 0 "Intel 82557" rev 0x08, i82559: apic 2 int 4 (irq 10), address 00:e0:18:0d:e6:98


inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4


uhci0 at pci0 dev 5 function 0 "VIA VT83C572 USB" rev 0x61: apic 2 int 2 (irq 5)


usb0 at uhci0: USB revision 1.0


uhub0 at usb0


uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1


uhub0: 2 ports with 2 removable, self powered


uhci1 at pci0 dev 5 function 1 "VIA VT83C572 USB" rev 0x61pci_intr_map: bus 0 dev 5 func 1 pin 2; line 12


pci_intr_map: no MP mapping found


isa_intr_establish: no MP mapping found


: irq 12


usb1 at uhci1: USB revision 1.0


uhub1 at usb1


uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1


uhub1: 2 ports with 2 removable, self powered


ehci0 at pci0 dev 5 function 2 "VIA VT6202 USB" rev 0x63pci_intr_map: bus 0 dev 5 func 2 pin 3; line 9


pci_intr_map: no MP mapping found


isa_intr_establish: no MP mapping found


: irq 9


usb2 at ehci0: USB revision 2.0


uhub2 at usb2


uhub2: VIA EHCI root hub, rev 2.00/1.00, addr 1


uhub2: 4 ports with 4 removable, self powered


cbb0 at pci0 dev 6 function 0 "Ricoh 5C475 CardBus" rev 0x81pci_intr_map: no mapping for pin A


: couldn't map interrupt


vga1 at pci0 dev 7 function 0 "ATI Rage XL" rev 0x27


wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)


wsdisplay0: screen 1-5 added (80x25, vt100 emulation)


pcib0 at pci0 dev 15 function 0 "ServerWorks ROSB4 SouthBridge" rev 0x50


pciide1 at pci0 dev 15 function 1 "ServerWorks OSB4 IDE" rev 0x00: DMA


atapiscsi0 at pciide1 channel 0 drive 0


scsibus2 at atapiscsi0: 2 targets


cd0 at scsibus2 targ 0 lun 0: <_NEC, DVD_RW ND-4550A, 1.06> SCSI0 5/cdrom removable


cd0(pciide1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 2


ohci0 at pci0 dev 15 function 2 "ServerWorks OSB4/CSB5 USB" rev 0x04panic: apic_intr_establish: bogus intr or type


Stopped at      Debugger+0x4:   leave


RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!


DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!


ddb{0}> trace


Debugger(fd103000,313101,d06fecc8,2,11) at Debugger+0x4


panic(d056aba0,80007a00,d06fecf8,40,d18bc000) at panic+0x63


apic_intr_establish(1002110b,3,40,d01b5970,d18bc000) at apic_intr_establish+0x6


5


pci_intr_establish(d01031a5,80007a00,1002110b,1,d187cdc0,40,d01b5970,d18bc000,d


18bc014,d06fed60,d06fed88,d0583f28) at pci_intr_establish+0x87


ohci_pci_attach(d187df40,d18bc000,d06fedf0,0,d18ba000) at ohci_pci_attach+0x137





config_attach(d187df40,d0583f28,d06fedf0,d0364d5c) at config_attach+0xef


pciattach(d187dfc0,d187df40,d06feeb0,0,d0593058) at pciattach+0x1c8


config_attach(d187dfc0,d05833e8,d06feeb0,d0364928) at config_attach+0xef


mainbus_attach(0,d187dfc0,0,0,d06fef10) at mainbus_attach+0x134


config_attach(0,d05833c4,0,0,d05d7100) at config_attach+0xef


config_rootfound(d051bb9c,0,d06fef58,d033a458) at config_rootfound+0x27


cpu_configure(0,1,3,0,3fff0000) at cpu_configure+0x1f


main(0,0,0,0,0) at main+0x359


ddb{0}> ps


   PID   PPID   PGRP    UID  S       FLAGS  WAIT       COMMAND


*    0     -1      0      0  7     0x80204             swapper


ddb{0}> ~


[EOT]


puff# ^Dexit




Script done on Mon Jan 30 08:54:29 2006




puff#


puff# ^Dexit




Script done on Mon Jan 30 08:57:19 2006