classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view


Manuel Pata
OpenBSD runs on eMac 700 NVidia, however it's not listed on the
supported hardware(macppc.html) diff at the bottom.


[ bsd ELF symbol table not valid: symtab unaligned ]
[ no symbol table formats found ]
console out [NVDA,Display-A]console in [keyboard] USB found
using parent NVDA,Parent:: memaddr 98000000 size 8000000, : consaddr
98004000, : ioaddr 91000000, size 1000000: memtag 8000, iotag 8000:
width 1280 linebytes 1536 height 960 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
         The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved.

OpenBSD 3.8 (RAMDISK) #627: Sat Sep 10 15:59:12 MDT 2005
     [hidden email]:/usr/src/sys/arch/macppc/compile/RAMDISK
real mem = 1069371392 (1044308K)
avail mem = 977014784 (954116K)
using 1254 buffers containing 53465088 bytes of memory
mainbus0 (root)
cpu0 at mainbus0: 7450 (Revision 0x201): 700 MHz: 256KB L2 cache
memc0 at mainbus0: uni-n
mpcpcibr0 at mainbus0: uni-north, Revision 0xff
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple Uni-N2 AGP" rev 0x00
vgafb0 at pci0 dev 16 function 0 "Nvidia GeForce2 MX" rev 0xb2, mmio
wsdisplay0 at vgafb0 mux 1: console (std, vt100 emulation)
mpcpcibr1 at mainbus0: uni-north, Revision 0x0
pci1 at mpcpcibr1 bus 0
pchb1 at pci1 dev 11 function 0 "Apple Uni-N2 Host" rev 0x00
macobio0 at pci1 dev 23 function 0 "Apple Keylargo" rev 0x03
openpic0 at macobio0: version 0x4614
macgpio0 at macobio0
macgpio1 at macgpio0 offset 0x59 irq 47
programmer-switch at macgpio0 offset 0x61 not configured
fan at macgpio0 offset 0x0 not configured
gpio7 at macgpio0 offset 0x71 not configured
gpio5 at macgpio0 offset 0x6f not configured
extint-gpio15 at macgpio0 offset 0x67 not configured
extint-gpio4 at macgpio0 offset 0x5c not configured
gpio6 at macgpio0 offset 0x70 not configured
gpio11 at macgpio0 offset 0x75 not configured
zsc0 at macobio0: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
adb0 at macobio0 irq 25: via-pmu , 0 targets
aed0 at adb0 addr 0: ADB Event device
wdc0 at macobio0 irq 19: DMA
wd0 at wdc0 channel 0 drive 0: <ST340810A>
wd0: 16-sector PIO, LBA, 39073MB, 80022600 sectors
wd0(wdc0:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 4
wdc1 at macobio0 irq 20: DMA
atapiscsi0 at wdc1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <_NEC, DVD_RW ND-3500AG, 2.16> SCSI0
5/cdrom removable
cd0(wdc1:0:0): using BIOS timings, DMA mode 2
wdc2 at macobio0 irq 21: DMA
ohci0 at pci1 dev 24 function 0 "Apple USB" rev 0x00: irq 27, version 1.0
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci1 dev 25 function 0 "Apple USB" rev 0x00: irq 28, version 1.0
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: Apple OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
mpcpcibr2 at mainbus0: uni-north, Revision 0x16
pci2 at mpcpcibr2 bus 0
pchb2 at pci2 dev 11 function 0 "Apple Uni-N2 Host" rev 0x00
"AT&T/Lucent FW322 1394" rev 0x00 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple GMAC" rev 0x01: irq 41, address
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
rd0: fixed, 8192 blocks
uhub2 at uhub0 port 1
uhub2: Mitsumi Electric Hub in Apple Extended USB Keyboard, rev
1.10/1.22, addr 2
uhub2: 3 ports with 2 removable, bus powered
hp deskjet 3600, class 0/0, rev 2.00/1.00, addr 2, uhub1 port 1 not
uhidev0 at uhub2 port 1 configuration 1 interface 0
uhidev0: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/1.22,
addr 3, iclass 3/1
ukbd0 at uhidev0
wskbd0 at ukbd0: console keyboard, using wsdisplay0
uhidev1 at uhub2 port 1 configuration 1 interface 1
uhidev1: Mitsumi Electric Apple Extended USB Keyboard, rev 1.10/1.22,
addr 3, iclass 3/0
uhidev1: 3 report ids
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub2 port 3 configuration 1 interface 0
uhidev2: Logitech Apple Optical USB Mouse, rev 1.10/26.54, addr 4,
iclass 3/1
uhid2 at uhidev2: input=3, output=0, feature=0
bootpath: '/pci@f2000000/mac-io@17/ata-3@20000/disk@0/3.8/macppc/bsd.rd'
rootdev=0x1100 rrootdev=0x1100 rawdev=0x1102
WARNING: clock gained 55 days -- CHECK AND RESET THE DATE!

--- macppc.html 2005-11-05 15:22:06.000000000 +0000
+++     2005-11-05 15:22:54.000000000 +0000
@@ -138,6 +138,7 @@
  <li>iMac DV+
  <li>iMac (LCD)
  <li>iMac G5 (after the 3.8 release)
  <li>Mac mini
  <li>PowerBook G3 (FireWire)
  <li>PowerBook G4

Manuel Pata
pata (ate) alface (dote) de