kqemu port

classic Classic list List threaded Threaded
17 messages Options
Reply | Threaded
Open this post in threaded view
|

kqemu port

Marco Peereboom
I know someone was working on a kqemu port.  Any clues where that is?

qemu is awesome for test but it really could use some extra speed...

Reply | Threaded
Open this post in threaded view
|

Re: kqemu port

Andrés Delfino
Reply | Threaded
Open this post in threaded view
|

Re: kqemu port

Roberto Fernandez-3
In reply to this post by Marco Peereboom
Here is mine, I submited it to qemu maintainer and have no feedback yet.

I have packaged the diffs submited by Adrian ENACHE to ports@ plus some modifications to create /dev/kqemu on module load.

I tested this on 4.1/i386 stable 4.2/i386. release
For amd64 this should work too, but LKM seems to be broken for this arch.
I have not yet removed amd64 from ONLY_FOR_ARCHES, since I was testing.

The attached archive contains kqemu port and a diff to qemu port.
The diff adds a kqemu flavor. Enache would prefer it to be the default.

Kernel source is a BUILD_DEPENDS, and I have no clue on how to show this in a pretty way.
After these changes, I believe the port will be 'clean'.

As it is my first submission, tell me if I do something wrong.

By the way is there someone working un an update to qemu-0.9.1 ?




On Sat, Jan 19, 2008 at 08:43:56AM -0600, Marco Peereboom wrote:
> I know someone was working on a kqemu port.  Any clues where that is?
>
> qemu is awesome for test but it really could use some extra speed...
>
>

kqemu.tgz (9K) Download Attachment
Reply | Threaded
Open this post in threaded view
|

Re: kqemu port

Marco Peereboom
I'll talk to todd to see why this isn't in.

On Sat, Jan 19, 2008 at 07:42:42PM +0100, Roberto FERNANDEZ wrote:

> Here is mine, I submited it to qemu maintainer and have no feedback yet.
>
> I have packaged the diffs submited by Adrian ENACHE to ports@ plus some modifications to create /dev/kqemu on module load.
>
> I tested this on 4.1/i386 stable 4.2/i386. release
> For amd64 this should work too, but LKM seems to be broken for this arch.
> I have not yet removed amd64 from ONLY_FOR_ARCHES, since I was testing.
>
> The attached archive contains kqemu port and a diff to qemu port.
> The diff adds a kqemu flavor. Enache would prefer it to be the default.
>
> Kernel source is a BUILD_DEPENDS, and I have no clue on how to show this in a pretty way.
> After these changes, I believe the port will be 'clean'.
>
> As it is my first submission, tell me if I do something wrong.
>
> By the way is there someone working un an update to qemu-0.9.1 ?
>
>
>
>
> On Sat, Jan 19, 2008 at 08:43:56AM -0600, Marco Peereboom wrote:
> > I know someone was working on a kqemu port.  Any clues where that is?
> >
> > qemu is awesome for test but it really could use some extra speed...
> >
> >


Reply | Threaded
Open this post in threaded view
|

Re: kqemu port

Mikolaj Kucharski-3
In reply to this post by Marco Peereboom
On Sat, Jan 19, 2008 at 08:43:56AM -0600, Marco Peereboom wrote:
> I know someone was working on a kqemu port.  Any clues where that is?
>
> qemu is awesome for test but it really could use some extra speed...

Slightly off topic, but how to check on OpenBSD does cpu support
hardware virtualization?

References
 1. linux% grep -E '^flags.*(vmx|svm)' /proc/cpuinfo

--
best regards
q#

Reply | Threaded
Open this post in threaded view
|

Re: kqemu port

Michael Knudsen-3
Quoting Mikolaj Kucharski ([hidden email]):
> Slightly off topic, but how to check on OpenBSD does cpu support
> hardware virtualization?
>
> References
>  1. linux% grep -E '^flags.*(vmx|svm)' /proc/cpuinfo

Something  like this:

        grep -E '^cpu?:.*(VMX|SVM)' /var/run/dmesg.boot

--
`Give a man a fire and he's warm for a day, but set fire to
him and he's warm for the rest of his life.'
-- (Terry Pratchett, Jingo)

Reply | Threaded
Open this post in threaded view
|

Re: kqemu port

Michael Knudsen-3
Quoting Michael Knudsen ([hidden email]):
[..]
> Something  like this:
>
> grep -E '^cpu?:.*(VMX|SVM)' /var/run/dmesg.boot

Err:

        grep -E 'cpu.*... etc.

--
There is no place I can go, there is no way I can hide.
It feels like it keeps coming from the inside.
-- (Nine Inch Nails, The Big Come Down)

Reply | Threaded
Open this post in threaded view
|

Re: kqemu port

Mikolaj Kucharski-3
On Sat, Jan 19, 2008 at 10:49:39PM +0100, Michael Knudsen wrote:
> Quoting Michael Knudsen ([hidden email]):
> [..]
> > Something  like this:
> >
> > grep -E '^cpu?:.*(VMX|SVM)' /var/run/dmesg.boot
>
> Err:
>
> grep -E 'cpu.*... etc.

Which flag acutally says that CPU supports hardware virtualizatoin? I
have few dmesgs from different machines. None of them have VMX or SVM
flag. That's why I'm asking.

--
best regards
q#

Reply | Threaded
Open this post in threaded view
|

Re: kqemu port

Michael Knudsen-3
Quoting Mikolaj Kucharski ([hidden email]):
> Which flag acutally says that CPU supports hardware virtualizatoin? I
> have few dmesgs from different machines. None of them have VMX or SVM
> flag. That's why I'm asking.

luggage$ grep ^cpu /var/run/dmesg.boot
cpu0: Genuine Intel(R) CPU T2400 @ 1.83GHz ("GenuineIntel" 686-class) 1.83 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
                                                   ^
This one ------------------------------------------|

--
`Real stupidity beats artificial intelligence every time.'
-- (Terry Pratchett, Hogfather)

Reply | Threaded
Open this post in threaded view
|

Re: kqemu port

Mikolaj Kucharski-3
On Sat, Jan 19, 2008 at 11:10:56PM +0100, Michael Knudsen wrote:

> Quoting Mikolaj Kucharski ([hidden email]):
> > Which flag acutally says that CPU supports hardware virtualizatoin? I
> > have few dmesgs from different machines. None of them have VMX or SVM
> > flag. That's why I'm asking.
>
> luggage$ grep ^cpu /var/run/dmesg.boot
> cpu0: Genuine Intel(R) CPU T2400 @ 1.83GHz ("GenuineIntel" 686-class) 1.83 GHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
>                                                    ^
> This one ------------------------------------------|

Compaq Armada M300 has MTRR too with Intel PIII processor. Do you think
it support hardware virtualization? MTRR it something completely
different.

--
best regards
q#

Reply | Threaded
Open this post in threaded view
|

Re: kqemu port

Michael Knudsen-3
Quoting Mikolaj Kucharski ([hidden email]):
[..]
> Compaq Armada M300 has MTRR too with Intel PIII processor. Do you think
> it support hardware virtualization? MTRR it something completely
> different.

In my MUA, the arrow was pointing at `VMX'.

--
Winter meant the coming of the lazy wind, which couldn't be bothered to
blow around people and blew right through them instead.
-- (Terry Pratchett, Wyrd Sisters)

Reply | Threaded
Open this post in threaded view
|

Re: kqemu port

Mikolaj Kucharski-3
On Sat, Jan 19, 2008 at 11:29:31PM +0100, Michael Knudsen wrote:
> Quoting Mikolaj Kucharski ([hidden email]):
> [..]
> > Compaq Armada M300 has MTRR too with Intel PIII processor. Do you think
> > it support hardware virtualization? MTRR it something completely
> > different.
>
> In my MUA, the arrow was pointing at `VMX'.

Ohh, sorry Michael :) Thanks.

--
best regards
q#

Reply | Threaded
Open this post in threaded view
|

Re: kqemu port

Jonathan ARMANI-2
In reply to this post by Marco Peereboom
On Sat, 19 Jan 2008 08:43:56 -0600
Marco Peereboom <[hidden email]> wrote:

> I know someone was working on a kqemu port.  Any clues where that is?
>
> qemu is awesome for test but it really could use some extra speed...
>
>

I have just try kqemu and I have the following error during the boot process of a virtualized OpenBSD :

[13:17:09] dbd@laptop:~ $ qemu -cdrom install42.iso
BEAX=00000000 EBX=00000089 ECX=d099eee0 EDX=00000089
ESI=00000001 EDI=d09a6200 EBP=d4fa6e58 ESP=d4fa6e48
EIP=d03ee7e8 EFL=00010287 [--S--PC] CPL=0 II=0 A20=1 SMM=0 HLT=0
ES =0010 00000000 ffffffff 00cff300
CS =0050 00000000 ffffffff 00cffb00
SS =0010 00000000 ffffffff 00cff300
DS =0010 00000000 ffffffff 00cff300
FS =0058 d0741320 000002ab d000f374
GS =0010 00000000 ffffffff 00cff300
LDT=0018 d06c0160 00000087 d000826c
TR =00a8 d4fa5000 00000333 d40089fa
GDT=     d4dc6000 0000ffff
IDT=     d06c0200 000007ff
CR0=e001003b CR2=7fffffff CR3=00744000 CR4=00000680
Unsupported return value: 0xffffffff

I can't re-use kqemu after :

[13:18:44] dbd@laptop:~ $ qemu -cdrom install42.iso  
Error -1 while initializing QEMU acceleration layer - disabling it for now


My /var/log/messages :

Jan 20 13:18:10 laptop /bsd: kqemu: aborting: Could not lock user page 0x8d37f000
Jan 20 13:18:10 laptop /bsd: kqemu: failed to unwire page at 0x8d3a3000

Any idea ?


--
DbD

Reply | Threaded
Open this post in threaded view
|

Re: kqemu port

Michael Lechtermann-4
Hi,

[hidden email] schrieb:

> I have just try kqemu and I have the following error during the boot process of a virtualized OpenBSD :
>
> [13:17:09] dbd@laptop:~ $ qemu -cdrom install42.iso
> BEAX=00000000 EBX=00000089 ECX=d099eee0 EDX=00000089
> ESI=00000001 EDI=d09a6200 EBP=d4fa6e58 ESP=d4fa6e48
> EIP=d03ee7e8 EFL=00010287 [--S--PC] CPL=0 II=0 A20=1 SMM=0 HLT=0
> ES =0010 00000000 ffffffff 00cff300
> CS =0050 00000000 ffffffff 00cffb00
> SS =0010 00000000 ffffffff 00cff300
> DS =0010 00000000 ffffffff 00cff300
> FS =0058 d0741320 000002ab d000f374
> GS =0010 00000000 ffffffff 00cff300
> LDT=0018 d06c0160 00000087 d000826c
> TR =00a8 d4fa5000 00000333 d40089fa
> GDT=     d4dc6000 0000ffff
> IDT=     d06c0200 000007ff
> CR0=e001003b CR2=7fffffff CR3=00744000 CR4=00000680
> Unsupported return value: 0xffffffff
>
> I can't re-use kqemu after :
>
> [13:18:44] dbd@laptop:~ $ qemu -cdrom install42.iso  
> Error -1 while initializing QEMU acceleration layer - disabling it for now
>
>
> My /var/log/messages :
>
> Jan 20 13:18:10 laptop /bsd: kqemu: aborting: Could not lock user page 0x8d37f000
> Jan 20 13:18:10 laptop /bsd: kqemu: failed to unwire page at 0x8d3a3000
>
> Any idea ?

Yes and no... I've had the same issue on one of three systems I tested
kqemu on. It works on my IBM X41, on Dell Optiplex SX270 but NOT on a
Dell Poweredge 2950, either with or without virtualization enabled in
the BIOS.

Behavior is as this:

Starting qemu with OpenBSD as host and guest. When the guest finished
loading the kernel, the guest just hangs for a while... when I then just
kill qemu I get spammed with those "unwire" messages on the host
system... even crashed it once.


# dmesg
OpenBSD 4.2-current (GENERIC.MP) #0: Thu Dec 27 12:41:29 CET 2007
     root@hostname:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
real mem  = 3488874496 (3327MB)
avail mem = 3385139200 (3228MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/10/07, BIOS32 rev. 0 @ 0xffe90,
SMBIOS rev. 2.4 @ 0xcffbc000 (62 entries)
bios0: vendor Dell Inc. version "1.5.1" date 08/10/2007
bios0: Dell Inc. PowerEdge 2950
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR HPET MCFG
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 332 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
ioapic1 at mainbus0: apid 3 pa 0xfec81000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 3
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 6 (PEX2)
acpiprt2 at acpi0: bus 7 (UPST)
acpiprt3 at acpi0: bus 8 (DWN1)
acpiprt4 at acpi0: bus 10 (DWN2)
acpiprt5 at acpi0: bus 1 (PEX3)
acpiprt6 at acpi0: bus 2 (PE2P)
acpiprt7 at acpi0: bus 12 (PEX4)
acpiprt8 at acpi0: bus 14 (PEX6)
acpiprt9 at acpi0: bus 4 (SBEX)
acpiprt10 at acpi0: bus 16 (COMP)
acpicpu0 at acpi0
acpicpu1 at acpi0
bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x5200 0xec000/0x4000!
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 6
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 7
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 8
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 9
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 2 int 16
(irq 11)
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01: apic 2 int
16 (irq 0)
pci5 at ppb4 bus 10
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 11
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
pci7 at ppb6 bus 1
ppb7 at pci7 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
pci8 at ppb7 bus 2
mfi0 at pci8 dev 14 function 0 "Dell PERC 5" rev 0x00: apic 3 int 14 (irq 5)
mfi0: logical drives 1, version 5.1.1-0040, 256MB RAM
scsibus0 at mfi0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 5/i, 1.03> SCSI3 0/direct fixed
sd0: 139392MB, 17769 cyl, 255 head, 63 sec, 512 bytes/sec, 285474816 sec
total
ppb8 at pci7 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
pci9 at ppb8 bus 3
ppb9 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12: apic 2 int 16
(irq 0)
pci10 at ppb9 bus 12
ppb10 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
ppb11 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12: apic 2 int 16
(irq 0)
pci12 at ppb11 bus 14
ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci13 at ppb12 bus 15
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb13 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci14 at ppb13 bus 4
ppb14 at pci14 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci15 at ppb14 bus 5
bnx1 at pci15 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 2 int
16 (irq 11)
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 2 int
21 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 2 int
20 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 2 int
21 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 2 int
21 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb15 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci16 at ppb15 bus 16
vga1 at pci16 dev 13 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.10> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
uhub4 at uhub0 port 1 "Dell product 0xa001" rev 2.00/0.00 addr 2
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Dell DRAC5" rev
1.10/0.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "Dell DRAC5" rev
1.10/0.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
uhub5 at uhub0 port 5 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 4
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
bnx1: address 00:1a:a0:19:78:fd
brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx0: address 00:1a:a0:19:78:ff
brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
kqemu: kqemu version 0x00010300 loaded, max locked mem=1703552kB
DDB symbols added: 308624 bytes

Reply | Threaded
Open this post in threaded view
|

Re: kqemu port

Stuart Henderson
are things any better with a non-MP kernel?

On 2008/01/21 11:58, Michael wrote:

> Hi,
>
> [hidden email] schrieb:
>> I have just try kqemu and I have the following error during the boot process of a virtualized OpenBSD :
>>
>> [13:17:09] dbd@laptop:~ $ qemu -cdrom install42.iso
>> BEAX=00000000 EBX=00000089 ECX=d099eee0 EDX=00000089
>> ESI=00000001 EDI=d09a6200 EBP=d4fa6e58 ESP=d4fa6e48
>> EIP=d03ee7e8 EFL=00010287 [--S--PC] CPL=0 II=0 A20=1 SMM=0 HLT=0
>> ES =0010 00000000 ffffffff 00cff300
>> CS =0050 00000000 ffffffff 00cffb00
>> SS =0010 00000000 ffffffff 00cff300
>> DS =0010 00000000 ffffffff 00cff300
>> FS =0058 d0741320 000002ab d000f374
>> GS =0010 00000000 ffffffff 00cff300
>> LDT=0018 d06c0160 00000087 d000826c
>> TR =00a8 d4fa5000 00000333 d40089fa
>> GDT=     d4dc6000 0000ffff
>> IDT=     d06c0200 000007ff
>> CR0=e001003b CR2=7fffffff CR3=00744000 CR4=00000680
>> Unsupported return value: 0xffffffff
>>
>> I can't re-use kqemu after :
>> [13:18:44] dbd@laptop:~ $ qemu -cdrom install42.iso  Error -1 while
>> initializing QEMU acceleration layer - disabling it for now
>>
>>
>> My /var/log/messages :
>>
>> Jan 20 13:18:10 laptop /bsd: kqemu: aborting: Could not lock user page 0x8d37f000
>> Jan 20 13:18:10 laptop /bsd: kqemu: failed to unwire page at 0x8d3a3000
>>
>> Any idea ?
>
> Yes and no... I've had the same issue on one of three systems I tested kqemu
> on. It works on my IBM X41, on Dell Optiplex SX270 but NOT on a Dell
> Poweredge 2950, either with or without virtualization enabled in the BIOS.
>
> Behavior is as this:
>
> Starting qemu with OpenBSD as host and guest. When the guest finished
> loading the kernel, the guest just hangs for a while... when I then just
> kill qemu I get spammed with those "unwire" messages on the host system...
> even crashed it once.
>
>
> # dmesg
> OpenBSD 4.2-current (GENERIC.MP) #0: Thu Dec 27 12:41:29 CET 2007
>     root@hostname:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> cpu0:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
> real mem  = 3488874496 (3327MB)
> avail mem = 3385139200 (3228MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 08/10/07, BIOS32 rev. 0 @ 0xffe90,
> SMBIOS rev. 2.4 @ 0xcffbc000 (62 entries)
> bios0: vendor Dell Inc. version "1.5.1" date 08/10/2007
> bios0: Dell Inc. PowerEdge 2950
> acpi0 at bios0: rev 2
> acpi0: tables DSDT FACP APIC SPCR HPET MCFG
> acpi0: wakeup devices PCI0(S5)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 332 MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
> cpu1:
> FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 2
> ioapic1 at mainbus0: apid 3 pa 0xfec81000, version 20, 24 pins
> ioapic1: misconfigured as apic 0, remapped to apid 3
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 6 (PEX2)
> acpiprt2 at acpi0: bus 7 (UPST)
> acpiprt3 at acpi0: bus 8 (DWN1)
> acpiprt4 at acpi0: bus 10 (DWN2)
> acpiprt5 at acpi0: bus 1 (PEX3)
> acpiprt6 at acpi0: bus 2 (PE2P)
> acpiprt7 at acpi0: bus 12 (PEX4)
> acpiprt8 at acpi0: bus 14 (PEX6)
> acpiprt9 at acpi0: bus 4 (SBEX)
> acpiprt10 at acpi0: bus 16 (COMP)
> acpicpu0 at acpi0
> acpicpu1 at acpi0
> bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x5200 0xec000/0x4000!
> ipmi at mainbus0 not configured
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
> ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
> pci1 at ppb0 bus 6
> ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
> pci2 at ppb1 bus 7
> ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
> pci3 at ppb2 bus 8
> ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
> pci4 at ppb3 bus 9
> bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 2 int 16
> (irq 11)
> ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01: apic 2 int 16
> (irq 0)
> pci5 at ppb4 bus 10
> ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
> pci6 at ppb5 bus 11
> ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
> pci7 at ppb6 bus 1
> ppb7 at pci7 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
> pci8 at ppb7 bus 2
> mfi0 at pci8 dev 14 function 0 "Dell PERC 5" rev 0x00: apic 3 int 14 (irq 5)
> mfi0: logical drives 1, version 5.1.1-0040, 256MB RAM
> scsibus0 at mfi0: 1 targets
> sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 5/i, 1.03> SCSI3 0/direct fixed
> sd0: 139392MB, 17769 cyl, 255 head, 63 sec, 512 bytes/sec, 285474816 sec
> total
> ppb8 at pci7 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
> pci9 at ppb8 bus 3
> ppb9 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12: apic 2 int 16 (irq
> 0)
> pci10 at ppb9 bus 12
> ppb10 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
> pci11 at ppb10 bus 13
> ppb11 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12: apic 2 int 16
> (irq 0)
> pci12 at ppb11 bus 14
> ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
> pci13 at ppb12 bus 15
> pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
> pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
> pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
> pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
> pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
> pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
> pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
> ppb13 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
> pci14 at ppb13 bus 4
> ppb14 at pci14 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
> pci15 at ppb14 bus 5
> bnx1 at pci15 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 2 int 16
> (irq 11)
> uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 2 int 21
> (irq 11)
> uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 2 int 20
> (irq 10)
> uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 2 int 21
> (irq 11)
> ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 2 int 21
> (irq 11)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb15 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
> pci16 at ppb15 bus 16
> vga1 at pci16 dev 13 function 0 "ATI ES1000" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
> pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA, channel
> 0 configured to compatibility, channel 1 configured to compatibility
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.10> SCSI0
> 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
> mtrr: Pentium Pro MTRR support
> uhub4 at uhub0 port 1 "Dell product 0xa001" rev 2.00/0.00 addr 2
> uhidev0 at uhub4 port 1 configuration 1 interface 0 "Dell DRAC5" rev
> 1.10/0.00 addr 3
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 modifier keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub4 port 1 configuration 1 interface 1 "Dell DRAC5" rev
> 1.10/0.00 addr 3
> uhidev1: iclass 3/1
> ums0 at uhidev1
> ums0: X report 0x0002 not supported
> uhub5 at uhub0 port 5 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 4
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
> bnx1: address 00:1a:a0:19:78:fd
> brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
> bnx0: address 00:1a:a0:19:78:ff
> brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
> kqemu: kqemu version 0x00010300 loaded, max locked mem=1703552kB
> DDB symbols added: 308624 bytes
>

Reply | Threaded
Open this post in threaded view
|

Re: kqemu port

Michael Lechtermann-4
Hi,

Stuart Henderson schrieb:
> are things any better with a non-MP kernel?

No, already tried that on the PE2950.

My guess is that it's the hardware somehow or maybe the type of CPU
since I only have the problem on the PE2950. It works on the SX270 with
MP kernel (P-4 Northwood 3.00 Ghz) and IBM X41 using non-MP (P-M
Centrino 1.6 Ghz).

I couldn't get it to work on the OptiPlex GX620 either so far. The whole
system just hangs when starting qemu.


$ dmesg
OpenBSD 4.2 (GENERIC.MP) #252: Tue Aug 28 10:53:04 MDT 2007
     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,CNXT-ID,CX16,xTPR
real mem  = 1063378944 (1014MB)
avail mem = 1020522496 (973MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 03/31/06, BIOS32 rev. 0 @ 0xffe90,
SMBIOS rev. 2.3 @ 0xf0450 (73 entries)
bios0: vendor Dell Inc.                 version "A07" date 03/31/2006
bios0: Dell Inc. OptiPlex GX620
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfed10/240 (13 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801GH LPC" rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0xa800! 0xca800/0x2000! 0xcc800/0x3800
mainbus0: Intel MP Specification (Version 1.4)
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 199 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Pentium(R) D CPU 3.00GHz ("GenuineIntel" 686-class) 3 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,CNXT-ID,CX16,xTPR
mainbus0: bus 0 is type PCI
mainbus0: bus 1 is type PCI
mainbus0: bus 2 is type PCI
mainbus0: bus 3 is type PCI
mainbus0: bus 4 is type ISA
ioapic0 at mainbus0: apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GP" rev 0x02: rng active,
8000000Kb/sec
vga1 at pci0 dev 2 function 0 "Intel 82945G Video" rev 0x02: aperture at
0xe0000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82945G Video" rev 0x02 at pci0 dev 2 function 1 not configured
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01
pci1 at ppb0 bus 1
bge0 at pci1 dev 0 function 0 "Broadcom BCM5751" rev 0x01, BCM5750 A1
(0x4001): apic 8 int 16 (irq 11), address 00:13:72:cf:5d:52
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb1 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01
pci2 at ppb1 bus 2
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 8 int
21 (irq 9)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 8 int
22 (irq 5)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 8 int
18 (irq 3)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 8 int
23 (irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 8 int
21 (irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xe1
pci3 at ppb2 bus 3
auich0 at pci0 dev 30 function 2 "Intel 82801GB AC97" rev 0x01: apic 8
int 23 (irq 10), ICH7 AC97
ac97: codec id 0x41445374 (Analog Devices AD1981B)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auich0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GB LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 82801GB IDE" rev 0x01: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, CDRW/DVD TSL462C, DE06> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
pciide1 at pci0 dev 31 function 2 "Intel 82801GB SATA" rev 0x01: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 8 int 20 (irq 5) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <WDC WD800JD-75LSA0>
wd0: 16-sector PIO, LBA48, 76293MB, 156250000 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: SMI
iic0 at ichiic0
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
apm0: disconnected
uhub5 at uhub0 port 4: Standard Microsystems Hub, rev 2.00/0.01, addr 2
umass0 at uhub0 port 7 configuration 1 interface 0
umass0: Prolific Technology Inc. Mass Storage Device, rev 2.00/1.00, addr 3
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <ST340083, 3ACE, 3.AC> SCSI0 0/direct fixed
sd0: 381554MB, 48641 cyl, 255 head, 63 sec, 512 bytes/sec, 781422768 sec
total
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: DELL DELL USB Keyboard, rev 1.10/1.05, addr 2, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 2 configuration 1 interface 0
uhidev1: Primax Electronics USB Optical Mouse, rev 2.00/2.00, addr 3,
iclass 3/1
ums0 at uhidev1: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: sd0 matches BIOS drive 0x81
root on wd0a swap on wd0b dump on wd0b
auich0: measured ac97 link rate at 47995 Hz, will use 48000 Hz
sd0 detached
scsibus1 detached
umass0 detached

Reply | Threaded
Open this post in threaded view
|

Re: kqemu port

Michael Lechtermann-4
In reply to this post by Stuart Henderson
Hi,

I took some screenshots:

http://openbsd.lechtermann.net/pub/misc/

sr1 -> taken on the host system when starting a guest in user mode
(without -no-kqemu and without -kernel-kqemu), the guest just crashed
after the kernel finished loading

sr2 -> taken on the guest when using -kernel-kqemu
sr3 -> taken on the host when using -kernel-qemu

Same error with and without VT disabled in the BIOS. Again, I only have
the problem on this machine. Using kqemu (with user mode) on an IBM
Thinkpad X41 and Dell Optiplex SX270 just works. (Same version of
OpenBSD 4.2-current from 23.01.08.)


# dmesg
OpenBSD 4.2-current (GENERIC.MP) #0: Sat Jan 26 14:05:52 CET 2008
    root@build:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
real mem  = 3488874496 (3327MB)
avail mem = 3385110528 (3228MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/10/07, BIOS32 rev. 0 @ 0xffe90,
SMBIOS rev. 2.4 @ 0xcffbc000 (62 entries)
bios0: vendor Dell Inc. version "1.5.1" date 08/10/2007
bios0: Dell Inc. PowerEdge 2950
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR HPET MCFG
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 332 MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Xeon(R) CPU 5130 @ 2.00GHz ("GenuineIntel" 686-class) 2 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
ioapic1 at mainbus0: apid 3 pa 0xfec81000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 3
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 6 (PEX2)
acpiprt2 at acpi0: bus 7 (UPST)
acpiprt3 at acpi0: bus 8 (DWN1)
acpiprt4 at acpi0: bus 10 (DWN2)
acpiprt5 at acpi0: bus 1 (PEX3)
acpiprt6 at acpi0: bus 2 (PE2P)
acpiprt7 at acpi0: bus 12 (PEX4)
acpiprt8 at acpi0: bus 14 (PEX6)
acpiprt9 at acpi0: bus 4 (SBEX)
acpiprt10 at acpi0: bus 16 (COMP)
acpicpu0 at acpi0
acpicpu1 at acpi0
bios0: ROM list: 0xc0000/0x9000! 0xc9000/0x5200 0xec000/0x4000!
ipmi at mainbus0 not configured
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 6
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 7
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 8
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 9
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 2 int 17
(irq 11)
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01: apic 2 int
17 (irq 0)
pci5 at ppb4 bus 10
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 11
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12
pci7 at ppb6 bus 1
ppb7 at pci7 dev 0 function 0 "Intel IOP333 PCIE-PCIX" rev 0x00
pci8 at ppb7 bus 2
mfi0 at pci8 dev 14 function 0 "Dell PERC 5" rev 0x00: apic 3 int 14 (irq 5)
mfi0: logical drives 1, version 5.1.1-0040, 256MB RAM
scsibus0 at mfi0: 1 targets
sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 5/i, 1.03> SCSI3 0/direct fixed
sd0: 139392MB, 17769 cyl, 255 head, 63 sec, 512 bytes/sec, 285474816 sec
total
ppb8 at pci7 dev 0 function 2 "Intel IOP333 PCIE-PCIX" rev 0x00
pci9 at ppb8 bus 3
ppb9 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12: apic 2 int 18
(irq 0)
pci10 at ppb9 bus 12
ppb10 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
ppb11 at pci0 dev 6 function 0 "Intel 5000 PCIE" rev 0x12: apic 2 int 19
(irq 0)
pci12 at ppb11 bus 14
ppb12 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci13 at ppb12 bus 15
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb13 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci14 at ppb13 bus 4
ppb14 at pci14 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci15 at ppb14 bus 5
bnx1 at pci15 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 2 int
16 (irq 11)
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 2 int
21 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 2 int
20 (irq 10)
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 2 int
21 (irq 11)
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 2 int
21 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb15 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd9
pci16 at ppb15 bus 16
vga1 at pci16 dev 13 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ichpcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09: PM disabled
pciide0 at pci0 dev 31 function 1 "Intel 6321ESB IDE" rev 0x09: DMA,
channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, CD-ROM GCR-8240N, 1.10> SCSI0
5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pccom1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
mtrr: Pentium Pro MTRR support
uhub4 at uhub0 port 1 "Dell product 0xa001" rev 2.00/0.00 addr 2
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Dell DRAC5" rev
1.10/0.00 addr 3
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub4 port 1 configuration 1 interface 1 "Dell DRAC5" rev
1.10/0.00 addr 3
uhidev1: iclass 3/1
ums0 at uhidev1
ums0: X report 0x0002 not supported
uhub5 at uhub0 port 5 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 4
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
bnx1: address 00:1a:a0:19:78:fd
brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx0: address 00:1a:a0:19:78:ff
brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
kqemu: kqemu version 0x00010300 loaded, max locked mem=1703552kB
DDB symbols added: 310288 bytes