kernel/5190: aironet 4800 (340) "not configured" on VIA K8M800/8237 systems

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

kernel/5190: aironet 4800 (340) "not configured" on VIA K8M800/8237 systems

Travers Buda-3
>Number:         5190
>Category:       kernel
>Synopsis:       aironet 4800 (340) "not configured" on VIA K8M800/8237 systems
>Confidential:   yes
>Severity:       non-critical
>Priority:       medium
>Responsible:    bugs
>State:          open
>Quarter:        
>Keywords:      
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Mon Jul 31 03:20:01 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator:     Travers Buda
>Release:        3.9 stable and current
>Organization:
net
>Environment:
        System      : OpenBSD 3.9 and current
        Architecture: OpenBSD.i386 and amd64
        Machine     : i386 and amd64
>Description:
        I've had two different motherboards with VIA K8M800/8237 chipsets, on both of which
        my cisco aironet 4800 (340) will show up as "not configured" on boot. I upgraded to -current
        but that didn't help. The radio is a pcmica card in a pci adaptor with a PLX 9050 PCI to "dumb bus"
        bridge chip as glue. The problem persists on both i386 and amd64.
       
  Here's the dmesg

OpenBSD 4.0-beta (GENERIC) #0: Sun Jul 30 08:13:06 MDT 2006
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 536408064 (523836K)
avail mem = 447787008 (437292K)
using 13147 buffers containing 53850112 bytes (52588K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.3 @ 0xf0800 (33 entries)
bios0: MICRO-STAR INTERNATIONAL CO., LTD MS-7142
cpu0 at mainbus0: (uniprocessor)
cpu0: AMD Athlon(tm) 64 Processor 3400+, 2400.06 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,NXE,MMXX,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "VIA K8M800 Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA K8M800 Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA K8M800 Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA K8M800 Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA K8M800 Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA K8M800 Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Matrox MGA G400/G450 AGP" rev 0x04
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
fxp0 at pci0 dev 9 function 0 "Intel 8255x" rev 0x08, i82559: irq 11, address 00:50:8b:b1:aa:9d
inphy0 at fxp0 phy 1: i82555 10/100 PHY, rev. 4
"Aironet PC4800 Wireless" rev 0x01 at pci0 dev 10 function 0 not configured
pciide0 at pci0 dev 15 function 0 "VIA VT6420 SATA" rev 0x80: DMA
pciide0: using irq 11 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <ST3808110AS>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06: ATA133, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <LITE-ON, CD-RW SOHR-5239V, 2$0C> SCSI0 5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide1: channel 1 disabled (no drives)
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 11
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 11
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
viapm0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
iic0 at viapm0
iic0: addr 0x2f 00=02 01=0f 02=00 03=01 04=07 05=00 06=18 07=00 08=00 14=14 15=62 16=02 17=05
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 5
ac97: codec id 0x56494170 (VIA Technologies <70>)
ac97: codec features headphone, 18 bit DAC, 18 bit ADC, KS Waves 3D
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 10, address 00:16:17:28:ac:01
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 10: OUI 0x004063, model 0x0032
pchb6 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb7 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb8 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb9 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at mainbus0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: W83627THF
dkcsum: wd0 matches BIOS drive 0x80
root on wd0k
rootdev=0xa rrootdev=0x30a rawdev=0x302

>How-To-Repeat:
        Use the above combo of hardware.
>Fix:
        Use different hardware.


>Release-Note:
>Audit-Trail:
>Unformatted:

Reply | Threaded
Open this post in threaded view
|

Re: kernel/5190: aironet 4800 (340) "not configured" on VIA K8M800/8237 systems

Jonathan Gray
The following reply was made to PR kernel/5190; it has been noted by GNATS.

From: Jonathan Gray <[hidden email]>
To: [hidden email]
Cc: [hidden email]
Subject: Re: kernel/5190: aironet 4800 (340) "not configured" on VIA K8M800/8237 systems
Date: Mon, 31 Jul 2006 19:20:26 +1000

 On Sun, Jul 30, 2006 at 10:09:08PM -0500, [hidden email] wrote:
 > >Number:         5190
 > >Category:       kernel
 > >Synopsis:       aironet 4800 (340) "not configured" on VIA K8M800/8237 systems
 > >Confidential:   yes
 > >Severity:       non-critical
 > >Priority:       medium
 > >Responsible:    bugs
 > >State:          open
 > >Quarter:        
 > >Keywords:      
 > >Date-Required:
 > >Class:          sw-bug
 > >Submitter-Id:   net
 > >Arrival-Date:   Mon Jul 31 03:20:01 GMT 2006
 > >Closed-Date:
 > >Last-Modified:
 > >Originator:     Travers Buda
 > >Release:        3.9 stable and current
 > >Organization:
 > net
 > >Environment:
 > System      : OpenBSD 3.9 and current
 > Architecture: OpenBSD.i386 and amd64
 > Machine     : i386 and amd64
 > >Description:
 > I've had two different motherboards with VIA K8M800/8237 chipsets, on both of which
 > my cisco aironet 4800 (340) will show up as "not configured" on boot. I upgraded to -current
 > but that didn't help. The radio is a pcmica card in a pci adaptor with a PLX 9050 PCI to "dumb bus"
 > bridge chip as glue. The problem persists on both i386 and amd64.
 >
 >   Here's the dmesg
 
 an(4) at pci is not yet enabled on amd64 GENERIC, I'll do that shortly if it compiles.
 Can you provide the dmesg from an i386 setup as well?  It _is_ enabled there, so there
 should at least be a different problem.

Reply | Threaded
Open this post in threaded view
|

Re: kernel/5190: aironet 4800 (340) "not configured" on VIA K8M800/8237 systems

Travers Buda
On Mon, 31 Jul 2006 03:35:01 -0600 (MDT)
Jonathan Gray <[hidden email]> wrote:

>  an(4) at pci is not yet enabled on amd64 GENERIC, I'll do that
> shortly if it compiles. Can you provide the dmesg from an i386 setup
> as well?  It _is_ enabled there, so there should at least be a
> different problem.
>

I tested -current an(4) at pci on amd64. I transfered some files,
nmaped some hosts; all seems well. As for the i386 problem, it's
a false alarm--I confused some dmesg files.

Go ahead and close the PR. Thanks!