jun 12 snapshot freeze on boot.

classic Classic list List threaded Threaded
9 messages Options
Reply | Threaded
Open this post in threaded view
|

jun 12 snapshot freeze on boot.

Rodrigo Mosconi-3
Hi,

I update a machine from May 10 snapshot to a Jun 12 snapshots, and the
system freezes.
It is a virtual machine (hosted-KVM, so I don`t now the versions).  The
bsd.rd boots fine.

Anyone has any clue?

Follow dmesg

Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2014 OpenBSD. All rights reserved.
http://www.OpenBSD.org

OpenBSD 5.5-current (GENERIC) #183: Thu Jun 12 12:51:28 MDT 2014
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 1056944128 (1007MB)
avail mem = 1020133376 (972MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x3ffffef0 (10 entries)
bios0: vendor Bochs version "Bochs" date 01/01/2007
bios0: Bochs Bochs
acpi0 at bios0: rev 0
acpi0: sleep states S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC HPET
acpi0: wakeup devices
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: QEMU Virtual CPU version 0.12.3, 2600.51 MHz
cpu0:
FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,POPCNT,NXE,LONG,LAHF,ABM,SSE4A,PERF
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 1000MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpihpet0 at acpi0: 100000000 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpicpu0 at acpi0
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
wd0: 16-sector PIO, LBA48, 20480MB, 41943040 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.12> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
cd0(pciide0:0:1): using PIO mode 0
atapiscsi1 at pciide0 channel 1 drive 0
scsibus2 at atapiscsi1: 2 targets
cd1 at scsibus2 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.12> ATAPI 5/cdrom
removable
cd1(pciide0:1:0): using PIO mode 0
uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 1 int 11
piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 1 int
9
iic0 at piixpm0
iic0: addr 0x18 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 words
00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x1a 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 words
00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x29 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 words
00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x2b 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 words
00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x4c 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 words
00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
iic0: addr 0x4e 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00 words
00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x03: apic 1 int 11,
address 52:54:00:27:29:09
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: density unknown
fd1 at fdc0 drive 1: density unknown
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
nvram: invalid checksum

Reply | Threaded
Open this post in threaded view
|

Re: jun 12 snapshot freeze on boot.

Rodrigo Mosconi-3
Follow bsd.rd dmesg:

Copyright (c) 1982, 1986, 1989, 1991, 1993
    The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2014 OpenBSD. All rights reserved.
http://www.OpenBSD.org

OpenBSD 5.5-current (RAMDISK_CD) #182: Thu Jun 12 13:02:18 MDT 2014
    [hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
real mem = 1056944128 (1007MB)
avail mem = 1023508480 (976MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x3ffffef0 (10 entries)
bios0: vendor Bochs version "Bochs" date 01/01/2007
bios0: Bochs Bochs
acpi0 at bios0: rev 0
acpi0: sleep states S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC HPET
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: QEMU Virtual CPU version 0.12.3, 2600.50 MHz
cpu0:
FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,POPCNT,NXE,LONG,LAHF,ABM,SSE4A,PERF
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
64b/line 16-way L2 cache
cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
cpu0: apic clock running at 1000MHz
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpiprt0 at acpi0: bus 0 (PCI0)
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
"Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured
pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel
0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
wd0: 16-sector PIO, LBA48, 20480MB, 41943040 sectors
atapiscsi0 at pciide0 channel 0 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.12> ATAPI 5/cdrom
removable
wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
cd0(pciide0:0:1): using PIO mode 0
atapiscsi1 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi1: 2 targets
cd1 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.12> ATAPI 5/cdrom
removable
cd1(pciide0:1:0): using PIO mode 0
uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 1 int 11
"Intel 82371AB Power" rev 0x03 at pci0 dev 1 function 3 not configured
vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x03: apic 1 int 11,
address 52:54:00:27:29:09
usb0 at uhci0: USB revision 1.0
uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at mainbus0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
softraid0 at root
scsibus2 at softraid0: 256 targets
root on rd0a swap on rd0b dump on rd0b



2014-06-12 20:29 GMT-03:00 Rodrigo Mosconi <[hidden email]>:

> Hi,
>
> I update a machine from May 10 snapshot to a Jun 12 snapshots, and the
> system freezes.
> It is a virtual machine (hosted-KVM, so I don`t now the versions).  The
> bsd.rd boots fine.
>
> Anyone has any clue?
>
> Follow dmesg
>
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
> Copyright (c) 1995-2014 OpenBSD. All rights reserved.
> http://www.OpenBSD.org
>
> OpenBSD 5.5-current (GENERIC) #183: Thu Jun 12 12:51:28 MDT 2014
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC
> real mem = 1056944128 (1007MB)
> avail mem = 1020133376 (972MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x3ffffef0 (10 entries)
> bios0: vendor Bochs version "Bochs" date 01/01/2007
> bios0: Bochs Bochs
> acpi0 at bios0: rev 0
> acpi0: sleep states S3 S4 S5
> acpi0: tables DSDT FACP SSDT APIC HPET
> acpi0: wakeup devices
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: QEMU Virtual CPU version 0.12.3, 2600.51 MHz
> cpu0:
> FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,POPCNT,NXE,LONG,LAHF,ABM,SSE4A,PERF
> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> 64b/line 16-way L2 cache
> cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 1000MHz
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 1
> acpihpet0 at acpi0: 100000000 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpicpu0 at acpi0
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
> pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
> pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
> wd0: 16-sector PIO, LBA48, 20480MB, 41943040 sectors
> atapiscsi0 at pciide0 channel 0 drive 1
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.12> ATAPI 5/cdrom
> removable
> wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
> cd0(pciide0:0:1): using PIO mode 0
> atapiscsi1 at pciide0 channel 1 drive 0
> scsibus2 at atapiscsi1: 2 targets
> cd1 at scsibus2 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.12> ATAPI 5/cdrom
> removable
> cd1(pciide0:1:0): using PIO mode 0
> uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 1 int 11
> piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 1
> int 9
> iic0 at piixpm0
> iic0: addr 0x18 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
> iic0: addr 0x1a 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
> iic0: addr 0x29 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
> iic0: addr 0x2b 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
> iic0: addr 0x4c 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
> iic0: addr 0x4e 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
> vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x03: apic 1 int 11,
> address 52:54:00:27:29:09
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> fd0 at fdc0 drive 0: density unknown
> fd1 at fdc0 drive 1: density unknown
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> nvram: invalid checksum

Reply | Threaded
Open this post in threaded view
|

Re: jun 12 snapshot freeze on boot.

Kent Fritz
Just a data-point: works here on a more modern qemu-kvm 1.6.1:

OpenBSD 5.5-current (GENERIC) #186: Thu Jun 12 21:59:00 MDT 2014
...
cpu0: QEMU Virtual CPU version 1.6.1, 3311.47 MHz
...

On Thu, Jun 12, 2014 at 4:31 PM, Rodrigo Mosconi <[hidden email]> wrote:

> Follow bsd.rd dmesg:
>
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>     The Regents of the University of California.  All rights reserved.
> Copyright (c) 1995-2014 OpenBSD. All rights reserved.
> http://www.OpenBSD.org
>
> OpenBSD 5.5-current (RAMDISK_CD) #182: Thu Jun 12 13:02:18 MDT 2014
>     [hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> real mem = 1056944128 (1007MB)
> avail mem = 1023508480 (976MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x3ffffef0 (10 entries)
> bios0: vendor Bochs version "Bochs" date 01/01/2007
> bios0: Bochs Bochs
> acpi0 at bios0: rev 0
> acpi0: sleep states S3 S4 S5
> acpi0: tables DSDT FACP SSDT APIC HPET
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: QEMU Virtual CPU version 0.12.3, 2600.50 MHz
> cpu0:
> FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,POPCNT,NXE,LONG,LAHF,ABM,SSE4A,PERF
> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> 64b/line 16-way L2 cache
> cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> cpu0: apic clock running at 1000MHz
> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 1
> acpiprt0 at acpi0: bus 0 (PCI0)
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
> "Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured
> pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA, channel
> 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
> wd0: 16-sector PIO, LBA48, 20480MB, 41943040 sectors
> atapiscsi0 at pciide0 channel 0 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.12> ATAPI 5/cdrom
> removable
> wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
> cd0(pciide0:0:1): using PIO mode 0
> atapiscsi1 at pciide0 channel 1 drive 0
> scsibus1 at atapiscsi1: 2 targets
> cd1 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.12> ATAPI 5/cdrom
> removable
> cd1(pciide0:1:0): using PIO mode 0
> uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 1 int 11
> "Intel 82371AB Power" rev 0x03 at pci0 dev 1 function 3 not configured
> vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x03: apic 1 int 11,
> address 52:54:00:27:29:09
> usb0 at uhci0: USB revision 1.0
> uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at mainbus0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on rd0a swap on rd0b dump on rd0b
>
>
>
> 2014-06-12 20:29 GMT-03:00 Rodrigo Mosconi <[hidden email]>:
>
>> Hi,
>>
>> I update a machine from May 10 snapshot to a Jun 12 snapshots, and the
>> system freezes.
>> It is a virtual machine (hosted-KVM, so I don`t now the versions).  The
>> bsd.rd boots fine.
>>
>> Anyone has any clue?
>>
>> Follow dmesg
>>
>> Copyright (c) 1982, 1986, 1989, 1991, 1993
>>     The Regents of the University of California.  All rights reserved.
>> Copyright (c) 1995-2014 OpenBSD. All rights reserved.
>> http://www.OpenBSD.org
>>
>> OpenBSD 5.5-current (GENERIC) #183: Thu Jun 12 12:51:28 MDT 2014
>>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC
>> real mem = 1056944128 (1007MB)
>> avail mem = 1020133376 (972MB)
>> mpath0 at root
>> scsibus0 at mpath0: 256 targets
>> mainbus0 at root
>> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x3ffffef0 (10 entries)
>> bios0: vendor Bochs version "Bochs" date 01/01/2007
>> bios0: Bochs Bochs
>> acpi0 at bios0: rev 0
>> acpi0: sleep states S3 S4 S5
>> acpi0: tables DSDT FACP SSDT APIC HPET
>> acpi0: wakeup devices
>> acpitimer0 at acpi0: 3579545 Hz, 24 bits
>> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
>> cpu0 at mainbus0: apid 0 (boot processor)
>> cpu0: QEMU Virtual CPU version 0.12.3, 2600.51 MHz
>> cpu0:
>> FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,POPCNT,NXE,LONG,LAHF,ABM,SSE4A,PERF
>> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
>> 64b/line 16-way L2 cache
>> cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
>> cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
>> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
>> cpu0: apic clock running at 1000MHz
>> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
>> ioapic0: misconfigured as apic 0, remapped to apid 1
>> acpihpet0 at acpi0: 100000000 Hz
>> acpiprt0 at acpi0: bus 0 (PCI0)
>> acpicpu0 at acpi0
>> pci0 at mainbus0 bus 0
>> pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
>> pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
>> pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA,
>> channel 0 wired to compatibility, channel 1 wired to compatibility
>> wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
>> wd0: 16-sector PIO, LBA48, 20480MB, 41943040 sectors
>> atapiscsi0 at pciide0 channel 0 drive 1
>> scsibus1 at atapiscsi0: 2 targets
>> cd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.12> ATAPI 5/cdrom
>> removable
>> wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
>> cd0(pciide0:0:1): using PIO mode 0
>> atapiscsi1 at pciide0 channel 1 drive 0
>> scsibus2 at atapiscsi1: 2 targets
>> cd1 at scsibus2 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.12> ATAPI 5/cdrom
>> removable
>> cd1(pciide0:1:0): using PIO mode 0
>> uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 1 int 11
>> piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 1
>> int 9
>> iic0 at piixpm0
>> iic0: addr 0x18 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
>> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
>> iic0: addr 0x1a 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
>> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
>> iic0: addr 0x29 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
>> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
>> iic0: addr 0x2b 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
>> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
>> iic0: addr 0x4c 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
>> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
>> iic0: addr 0x4e 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
>> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
>> vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
>> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
>> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
>> em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x03: apic 1 int 11,
>> address 52:54:00:27:29:09
>> isa0 at pcib0
>> isadma0 at isa0
>> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
>> com0: console
>> pckbc0 at isa0 port 0x60/5
>> pckbd0 at pckbc0 (kbd slot)
>> pckbc0: using irq 1 for kbd slot
>> wskbd0 at pckbd0: console keyboard, using wsdisplay0
>> pms0 at pckbc0 (aux slot)
>> pckbc0: using irq 12 for aux slot
>> wsmouse0 at pms0 mux 0
>> pcppi0 at isa0 port 0x61
>> spkr0 at pcppi0
>> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
>> fd0 at fdc0 drive 0: density unknown
>> fd1 at fdc0 drive 1: density unknown
>> usb0 at uhci0: USB revision 1.0
>> uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
>> nvram: invalid checksum

Reply | Threaded
Open this post in threaded view
|

Re: jun 12 snapshot freeze on boot.

Rodrigo Mosconi-3
Unfortunately,  I don`t manage the Host system.  The freeze server is a vps
machine from arpnetworks...


2014-06-13 9:59 GMT-03:00 Kent Fritz <[hidden email]>:

> Just a data-point: works here on a more modern qemu-kvm 1.6.1:
>
> OpenBSD 5.5-current (GENERIC) #186: Thu Jun 12 21:59:00 MDT 2014
> ...
> cpu0: QEMU Virtual CPU version 1.6.1, 3311.47 MHz
> ...
>
> On Thu, Jun 12, 2014 at 4:31 PM, Rodrigo Mosconi <[hidden email]>
> wrote:
> > Follow bsd.rd dmesg:
> >
> > Copyright (c) 1982, 1986, 1989, 1991, 1993
> >     The Regents of the University of California.  All rights reserved.
> > Copyright (c) 1995-2014 OpenBSD. All rights reserved.
> > http://www.OpenBSD.org
> >
> > OpenBSD 5.5-current (RAMDISK_CD) #182: Thu Jun 12 13:02:18 MDT 2014
> >     [hidden email]:/usr/src/sys/arch/amd64/compile/RAMDISK_CD
> > real mem = 1056944128 (1007MB)
> > avail mem = 1023508480 (976MB)
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x3ffffef0 (10 entries)
> > bios0: vendor Bochs version "Bochs" date 01/01/2007
> > bios0: Bochs Bochs
> > acpi0 at bios0: rev 0
> > acpi0: sleep states S3 S4 S5
> > acpi0: tables DSDT FACP SSDT APIC HPET
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: QEMU Virtual CPU version 0.12.3, 2600.50 MHz
> > cpu0:
> >
> FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,POPCNT,NXE,LONG,LAHF,ABM,SSE4A,PERF
> > cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> > 64b/line 16-way L2 cache
> > cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> > cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> > cpu0: apic clock running at 1000MHz
> > ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
> > ioapic0: misconfigured as apic 0, remapped to apid 1
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
> > "Intel 82371SB ISA" rev 0x00 at pci0 dev 1 function 0 not configured
> > pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA,
> channel
> > 0 wired to compatibility, channel 1 wired to compatibility
> > wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
> > wd0: 16-sector PIO, LBA48, 20480MB, 41943040 sectors
> > atapiscsi0 at pciide0 channel 0 drive 1
> > scsibus0 at atapiscsi0: 2 targets
> > cd0 at scsibus0 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.12> ATAPI 5/cdrom
> > removable
> > wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
> > cd0(pciide0:0:1): using PIO mode 0
> > atapiscsi1 at pciide0 channel 1 drive 0
> > scsibus1 at atapiscsi1: 2 targets
> > cd1 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.12> ATAPI 5/cdrom
> > removable
> > cd1(pciide0:1:0): using PIO mode 0
> > uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 1 int
> 11
> > "Intel 82371AB Power" rev 0x03 at pci0 dev 1 function 3 not configured
> > vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
> > wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> > em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x03: apic 1 int 11,
> > address 52:54:00:27:29:09
> > usb0 at uhci0: USB revision 1.0
> > uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> > isa0 at mainbus0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > com0: console
> > pckbc0 at isa0 port 0x60/5
> > pckbd0 at pckbc0 (kbd slot)
> > pckbc0: using irq 1 for kbd slot
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > softraid0 at root
> > scsibus2 at softraid0: 256 targets
> > root on rd0a swap on rd0b dump on rd0b
> >
> >
> >
> > 2014-06-12 20:29 GMT-03:00 Rodrigo Mosconi <[hidden email]>:
> >
> >> Hi,
> >>
> >> I update a machine from May 10 snapshot to a Jun 12 snapshots, and the
> >> system freezes.
> >> It is a virtual machine (hosted-KVM, so I don`t now the versions).  The
> >> bsd.rd boots fine.
> >>
> >> Anyone has any clue?
> >>
> >> Follow dmesg
> >>
> >> Copyright (c) 1982, 1986, 1989, 1991, 1993
> >>     The Regents of the University of California.  All rights reserved.
> >> Copyright (c) 1995-2014 OpenBSD. All rights reserved.
> >> http://www.OpenBSD.org
> >>
> >> OpenBSD 5.5-current (GENERIC) #183: Thu Jun 12 12:51:28 MDT 2014
> >>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC
> >> real mem = 1056944128 (1007MB)
> >> avail mem = 1020133376 (972MB)
> >> mpath0 at root
> >> scsibus0 at mpath0: 256 targets
> >> mainbus0 at root
> >> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0x3ffffef0 (10 entries)
> >> bios0: vendor Bochs version "Bochs" date 01/01/2007
> >> bios0: Bochs Bochs
> >> acpi0 at bios0: rev 0
> >> acpi0: sleep states S3 S4 S5
> >> acpi0: tables DSDT FACP SSDT APIC HPET
> >> acpi0: wakeup devices
> >> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> >> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> >> cpu0 at mainbus0: apid 0 (boot processor)
> >> cpu0: QEMU Virtual CPU version 0.12.3, 2600.51 MHz
> >> cpu0:
> >>
> FPU,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,SSE3,CX16,POPCNT,NXE,LONG,LAHF,ABM,SSE4A,PERF
> >> cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 512KB
> >> 64b/line 16-way L2 cache
> >> cpu0: ITLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> >> cpu0: DTLB 255 4KB entries direct-mapped, 255 4MB entries direct-mapped
> >> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> >> cpu0: apic clock running at 1000MHz
> >> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 11, 24 pins
> >> ioapic0: misconfigured as apic 0, remapped to apid 1
> >> acpihpet0 at acpi0: 100000000 Hz
> >> acpiprt0 at acpi0: bus 0 (PCI0)
> >> acpicpu0 at acpi0
> >> pci0 at mainbus0 bus 0
> >> pchb0 at pci0 dev 0 function 0 "Intel 82441FX" rev 0x02
> >> pcib0 at pci0 dev 1 function 0 "Intel 82371SB ISA" rev 0x00
> >> pciide0 at pci0 dev 1 function 1 "Intel 82371SB IDE" rev 0x00: DMA,
> >> channel 0 wired to compatibility, channel 1 wired to compatibility
> >> wd0 at pciide0 channel 0 drive 0: <QEMU HARDDISK>
> >> wd0: 16-sector PIO, LBA48, 20480MB, 41943040 sectors
> >> atapiscsi0 at pciide0 channel 0 drive 1
> >> scsibus1 at atapiscsi0: 2 targets
> >> cd0 at scsibus1 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.12> ATAPI 5/cdrom
> >> removable
> >> wd0(pciide0:0:0): using PIO mode 0, DMA mode 2
> >> cd0(pciide0:0:1): using PIO mode 0
> >> atapiscsi1 at pciide0 channel 1 drive 0
> >> scsibus2 at atapiscsi1: 2 targets
> >> cd1 at scsibus2 targ 0 lun 0: <QEMU, QEMU DVD-ROM, 0.12> ATAPI 5/cdrom
> >> removable
> >> cd1(pciide0:1:0): using PIO mode 0
> >> uhci0 at pci0 dev 1 function 2 "Intel 82371SB USB" rev 0x01: apic 1 int
> 11
> >> piixpm0 at pci0 dev 1 function 3 "Intel 82371AB Power" rev 0x03: apic 1
> >> int 9
> >> iic0 at piixpm0
> >> iic0: addr 0x18 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
> >> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
> >> iic0: addr 0x1a 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
> >> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
> >> iic0: addr 0x29 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
> >> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
> >> iic0: addr 0x2b 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
> >> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
> >> iic0: addr 0x4c 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
> >> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
> >> iic0: addr 0x4e 00=00 01=00 02=00 03=00 04=00 05=00 06=00 07=00 08=00
> >> words 00=0000 01=0000 02=0000 03=0000 04=0000 05=0000 06=0000 07=0000
> >> vga1 at pci0 dev 2 function 0 "Cirrus Logic CL-GD5446" rev 0x00
> >> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> >> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> >> em0 at pci0 dev 3 function 0 "Intel 82540EM" rev 0x03: apic 1 int 11,
> >> address 52:54:00:27:29:09
> >> isa0 at pcib0
> >> isadma0 at isa0
> >> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> >> com0: console
> >> pckbc0 at isa0 port 0x60/5
> >> pckbd0 at pckbc0 (kbd slot)
> >> pckbc0: using irq 1 for kbd slot
> >> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> >> pms0 at pckbc0 (aux slot)
> >> pckbc0: using irq 12 for aux slot
> >> wsmouse0 at pms0 mux 0
> >> pcppi0 at isa0 port 0x61
> >> spkr0 at pcppi0
> >> fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
> >> fd0 at fdc0 drive 0: density unknown
> >> fd1 at fdc0 drive 1: density unknown
> >> usb0 at uhci0: USB revision 1.0
> >> uhub0 at usb0 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> >> nvram: invalid checksum

Reply | Threaded
Open this post in threaded view
|

Re: jun 12 snapshot freeze on boot.

Stuart Henderson
On 2014-06-13, Rodrigo Mosconi <[hidden email]> wrote:
> Unfortunately,  I don`t manage the Host system.  The freeze server is a vps
> machine from arpnetworks...

You didn't mention at what point it freezes, which may be useful
information.

BTW ARP Networks are in a round of host OS upgrades so this problem
might go away.

Reply | Threaded
Open this post in threaded view
|

Re: jun 12 snapshot freeze on boot.

Otto Moerbeek
On Sat, Jun 14, 2014 at 09:44:29AM +0000, Stuart Henderson wrote:

> On 2014-06-13, Rodrigo Mosconi <[hidden email]> wrote:
> > Unfortunately,  I don`t manage the Host system.  The freeze server is a vps
> > machine from arpnetworks...
>
> You didn't mention at what point it freezes, which may be useful
> information.
>
> BTW ARP Networks are in a round of host OS upgrades so this problem
> might go away.

This might be relevant

http://support.arpnetworks.com/kb/vps/openbsd-hangs-at-setting-tty-flags-when-i-use-a-custom-kernel

        -Otto

Reply | Threaded
Open this post in threaded view
|

Re: jun 12 snapshot freeze on boot.

Stuart Henderson
On 2014/06/14 12:00, Otto Moerbeek wrote:
> This might be relevant
>
> http://support.arpnetworks.com/kb/vps/openbsd-hangs-at-setting-tty-flags-when-i-use-a-custom-kernel

I haven't needed that on mine, though OpenBSD/i386 does run much better
on KVM if mpbios is disabled (lapic_tpr related, thanks haesbaert for
working that out!).

Seems the problem OP is experiencing is with a recent kernel change though.

Reply | Threaded
Open this post in threaded view
|

Re: jun 12 snapshot freeze on boot.

Brad Smith-14
In reply to this post by Otto Moerbeek
On 14/06/14 6:00 AM, Otto Moerbeek wrote:

> On Sat, Jun 14, 2014 at 09:44:29AM +0000, Stuart Henderson wrote:
>
>> On 2014-06-13, Rodrigo Mosconi <[hidden email]> wrote:
>>> Unfortunately,  I don`t manage the Host system.  The freeze server is a vps
>>> machine from arpnetworks...
>>
>> You didn't mention at what point it freezes, which may be useful
>> information.
>>
>> BTW ARP Networks are in a round of host OS upgrades so this problem
>> might go away.
>
> This might be relevant
>
> http://support.arpnetworks.com/kb/vps/openbsd-hangs-at-setting-tty-flags-when-i-use-a-custom-kernel

I think kettenis commited something that made that no longer necessary.
4.5 is pretty old ;)


--
This message has been scanned for viruses and
dangerous content by MailScanner, and is
believed to be clean.

Reply | Threaded
Open this post in threaded view
|

Re: jun 12 snapshot freeze on boot.

Rodrigo Mosconi-3
In reply to this post by Stuart Henderson
2014-06-14 6:44 GMT-03:00 Stuart Henderson <[hidden email]>:

> On 2014-06-13, Rodrigo Mosconi <[hidden email]> wrote:
> > Unfortunately,  I don`t manage the Host system.  The freeze server is a
> vps
> > machine from arpnetworks...
>
> You didn't mention at what point it freezes, which may be useful
> information.
>

Sory, It`s freezes on message "nvram: invalid checksum"


>
> BTW ARP Networks are in a round of host OS upgrades so this problem
> might go away.