intel(4) slow on G33

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

intel(4) slow on G33

Henry Precheur
X11 is slow on my computer. I am not 100% sure, but I believe it started
when I updated OpenBSD a few weeks ago. The intel(4) driver was updated
to version 2.7.1.

It's still usable, but it is definitly slower than before. If I hide and
show Firefox, it takes 1/2 second to redraw.

Any advice on how I could track this problem?

My /var/log/Xorg.0.log & dmesg are below. I don't have a xorg.conf.


Cheers,

---
/var/log/Xorg.0.log

(--) checkDevMem: using aperture driver /dev/xf86
(--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32)

X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: OpenBSD 4.6 amd64
Current Operating System: OpenBSD banane.novuscom.net 4.6 GENERIC#86 amd64
Build Date: 23 July 2009  11:59:39AM
 
        Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug  1 21:38:09 2009
(EE) Unable to locate/open config file
(II) Loader magic: 0x771560
(II) Module ABI versions:
        X.Org ANSI C Emulation: 0.4
        X.Org Video Driver: 4.1
        X.Org XInput driver : 2.1
        X.Org Server Extension : 1.1
        X.Org Font Renderer : 0.6
(II) Loader running on openbsd
(--) PCI:*(0@0:2:0) Intel 82G33 Video rev 2, Mem @ 0x90300000/524288, 0x80000000/268435456, 0x90200000/1048576, I/O @ 0x00002460/8
(==) Matched intel for the autoconfigured driver
New driver is "intel"
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
        Section "Device"
                Identifier "Builtin Default intel Device 0"
                Driver "intel"
        EndSection
        Section "Screen"
                Identifier "Builtin Default intel Screen 0"
                Device "Builtin Default intel Device 0"
        EndSection
        Section "Device"
                Identifier "Builtin Default fbdev Device 0"
                Driver "fbdev"
        EndSection
        Section "Screen"
                Identifier "Builtin Default fbdev Screen 0"
                Device "Builtin Default fbdev Device 0"
        EndSection
        Section "Device"
                Identifier "Builtin Default vesa Device 0"
                Driver "vesa"
        EndSection
        Section "Screen"
                Identifier "Builtin Default vesa Screen 0"
                Device "Builtin Default vesa Device 0"
        EndSection
        Section "ServerLayout"
                Identifier "Builtin Default Layout"
                Screen "Builtin Default intel Screen 0"
                Screen "Builtin Default fbdev Screen 0"
                Screen "Builtin Default vesa Screen 0"
        EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default intel Screen 0" (0)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default intel Device 0"
(==) No monitor specified for screen "Builtin Default intel Screen 0".
        Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (1)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
        Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (2)
(**) |   |-->Monitor "<default monitor>"
(**) |   |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
        Using a default monitor configuration.
(==) Not automatically adding devices
(==) Not automatically enabling devices
(==) No FontPath specified.  Using compiled-in default.
(==) FontPath set to:
        /usr/X11R6/lib/X11/fonts/misc/,
        /usr/X11R6/lib/X11/fonts/TTF/,
        /usr/X11R6/lib/X11/fonts/OTF,
        /usr/X11R6/lib/X11/fonts/Type1/,
        /usr/X11R6/lib/X11/fonts/100dpi/,
        /usr/X11R6/lib/X11/fonts/75dpi/
(==) ModulePath set to "/usr/X11R6/lib/modules"
(==) |-->Input Device "<default pointer>"
(==) |-->Input Device "<default keyboard>"
(==) The core pointer device wasn't specified explicitly in the layout.
        Using the default mouse configuration.
(==) The core keyboard device wasn't specified explicitly in the layout.
        Using the default keyboard configuration.
(II) System resource ranges:
        [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(II) LoadModule: "extmod"

(II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"

(II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        Module class: X.Org Server Extension
        ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"

(II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "freetype"

(II) Loading /usr/X11R6/lib/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
        compiled for 1.5.3, module version = 2.1.0
        Module class: X.Org Font Renderer
        ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "dri"

(II) Loading /usr/X11R6/lib/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "intel"

(II) Loading /usr/X11R6/lib/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 2.7.1
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "fbdev"

(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) LoadModule: "vesa"

(II) Loading /usr/X11R6/lib/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 2.2.0
        Module class: X.Org Video Driver
        ABI class: X.Org Video Driver, version 4.1
(II) LoadModule: "mouse"

(II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.4.0
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 2.1
(II) LoadModule: "kbd"

(II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.3.2
        Module class: X.Org XInput Driver
        ABI class: X.Org XInput driver, version 2.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
        965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
        Mobile IntelB. GM45 Express Chipset,
        Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
        [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
        [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
        [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
        [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
        [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
        [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
        [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
        [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
        [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"

(II) Loading /usr/X11R6/lib/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 0.1.0
        ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Creating default Display subsection in Screen section
        "Builtin Default intel Screen 0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) G33
(--) intel(0): Chipset: "G33"
(--) intel(0): Linear framebuffer at 0x80000000
(--) intel(0): IO registers at addr 0x90300000
(WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
(==) intel(0): Using EXA for acceleration
(II) intel(0): 2 display pipes available.
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA has no monitor section
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): Resizable framebuffer: not available (1 3)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "SAM", prod id 627
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
(II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
(II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
(II) intel(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
(II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
(II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) intel(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
(II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
(II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
(II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
(II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
(II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
(II) intel(0): Modeline "1440x900"x60.0  106.47  1440 1520 1672 1904  900 901 904 932 -hsync +vsync (55.9 kHz)
(II) intel(0): Modeline "1440x900"x75.0  136.49  1440 1536 1688 1936  900 901 904 940 -hsync +vsync (70.5 kHz)
(II) intel(0): Modeline "1280x1024"x60.0  108.88  1280 1360 1496 1712  1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
(II) intel(0): Modeline "1280x960"x60.0  102.10  1280 1360 1496 1712  960 961 964 994 -hsync +vsync (59.6 kHz)
(II) intel(0): Modeline "1152x864"x75.0  104.99  1152 1224 1352 1552  864 865 868 902 -hsync +vsync (67.7 kHz)
(II) intel(0): EDID vendor "SAM", prod id 627
(II) intel(0): Output VGA connected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output VGA using initial mode 1440x900
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) intel(0): detected 1024 kB GTT.
(II) intel(0): detected 7164 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(**) intel(0): Display dimensions: (410, 260) mm
(**) intel(0): DPI set to (89, 140)
(II) Loading sub module "fb"
(II) LoadModule: "fb"

(II) Loading /usr/X11R6/lib/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 1.0.0
        ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"

(II) Loading /usr/X11R6/lib/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
        compiled for 1.5.3, module version = 2.4.0
        ABI class: X.Org Video Driver, version 4.1
(II) intel(0): Comparing regs from server start up to After PreInit
(II) UnloadModule: "vesa"
(II) Unloading /usr/X11R6/lib/modules/drivers//vesa_drv.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC?  No, I don't.
(II) resource ranges after preInit:
        [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
        [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
        [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
        [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
        [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
        [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
        [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
        [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
        [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
        [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
        [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
(II) intel(0): Kernel reported 491520 total, 0 used
(II) intel(0): I830CheckAvailableMemory: 1966080 kB available
drmOpenDevice: node name is /dev/drm0
drmOpenDevice: open result is 13, (OK)
drmOpenDevice: node name is /dev/drm0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/drm0
drmOpenDevice: open result is 13, (OK)
drmOpenByBusid: drmOpenMinor returns 13
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.2
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0x40002000
(II) intel(0): [drm] ring buffer = 0x40082000
(II) intel(0): [drm] mapped front buffer at 0x81000000, handle = 0x400a2000
(II) intel(0): [drm] mapped back buffer at 0x85000000, handle = 0x40be2000
(II) intel(0): [drm] mapped depth buffer at 0x86000000, handle = 0x41be2000
(II) intel(0): [drm] mapped classic textures at 0x87000000, handle = 0x42be2000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
(II) EXA(0): Offscreen pixmap area of 35389440 bytes
(II) EXA(0): Driver registered support for the following operations:
(II)         Solid
(II)         Copy
(II)         Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x006ff000 (pgoffset 1791)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0082a000 (pgoffset 2090)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x0082b000 (pgoffset 2091)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 6 at 0x06000000 (pgoffset 24576)
(II) intel(0): xf86BindGARTMemory: bind key 7 at 0x07000000 (pgoffset 28672)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
(II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB)
(II) intel(0): 0x006ff000:            end of stolen memory
(II) intel(0): 0x0082a000-0x0082afff: overlay registers (4 kB)
(II) intel(0): 0x0082b000-0x0082bfff: HW status (4 kB)
(II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
(II) intel(0): 0x02000000-0x041bffff: exa offscreen (34560 kB)
(II) intel(0): 0x05000000-0x05ffffff: back buffer (16384 kB) X tiled
(II) intel(0): 0x06000000-0x06ffffff: depth buffer (16384 kB) X tiled
(II) intel(0): 0x07000000-0x08ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000:            end of aperture
(II) intel(0): Output configuration:
(II) intel(0):   Pipe A is on
(II) intel(0):   Display plane A is now enabled and connected to pipe A.
(II) intel(0):   Pipe B is off
(II) intel(0):   Display plane B is now disabled and connected to pipe B.
(II) intel(0):   Output VGA is connected to pipe A
(II) intel(0): [drm] dma control initialized, using IRQ 11
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: XF86DRI Enabled
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/drm0
drmOpenDevice: open result is 14, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/drm0
drmOpenDevice: open result is 14, (OK)
drmOpenByBusid: drmOpenMinor returns 14
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 410 x 257
(WW) <default pointer>: No Device specified, looking for one...
(II) <default pointer>: found Device "/dev/wsmouse"
(**) <default pointer>: Protocol: WSMouse
(**) Option "CorePointer"
(**) <default pointer>: always reports core events
(**) Option "Device" "/dev/wsmouse"
(==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
(**) <default pointer>: ZAxisMapping: buttons 4 and 5
(**) <default pointer>: Buttons: 9
(**) Option "CoreKeyboard"
(**) <default keyboard>: always reports core events
(**) Option "Protocol" "standard"
(**) <default keyboard>: Protocol: standard
(--) <default keyboard>: using wscons layout us
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) <default keyboard>: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) <default keyboard>: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) <default keyboard>: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) <default keyboard>: CustomKeycodes disabled
(II) evaluating device (<default pointer>)
(II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
(II) evaluating device (<default keyboard>)
(II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
(II) 3rd Button detected: disabling emulate3Button

---
dmesg


OpenBSD 4.6-current (GENERIC) #86: Mon Jul 27 14:59:03 MDT 2009
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC
real mem = 2116874240 (2018MB)
avail mem = 2042974208 (1948MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe33f0 (32 entries)
bios0: vendor Intel Corp. version "DPP3510J.86A.0517.2009.0107.2203" date 01/07/2009
bios0: Intel Corporation DG33BU
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC WDDT MCFG ASF! ASPT WDTT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT
acpi0: wakeup devices SLPB(S4) P32_(S4) ECIR(S4) UAR1(S4) ILAN(S4) PEGP(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) EHC2(S3) UH42(S3) UHC5(S3) UHC6(S3) AZAL(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz, 1600.28 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG
cpu0: 1MB 64b/line 4-way L2 cache
cpu0: apic clock running at 202MHz
cpu at mainbus0: not configured
ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 6 (P32_)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus 4 (PEX3)
acpiprt6 at acpi0: bus 5 (PEX4)
acpiprt7 at acpi0: bus -1 (PEX5)
acpicpu0 at acpi0: C1, PSS
acpibtn0 at acpi0: SLPB
cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1600, 1400, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82G33 Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0x80000000, size 0x10000000
inteldrm0 at vga1: apic 2 int 16 (irq 11)
drm0 at inteldrm0
"Intel 82G33 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP C" rev 0x02: apic 2 int 20 (irq 9), address 00:1c:c0:0c:bf:23
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 18 (irq 10)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 21 (irq 11)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 17 (irq 9)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 17 (irq 9)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: apic 2 int 22 (irq 10)
azalia0: codecs: Realtek ALC888
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 2 int 17 (irq 255)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x02: apic 2 int 20 (irq 255)
pci2 at ppb1 bus 2
pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb2: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 2 int 17 (irq 9) for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H55N, 1.03> ATAPI 5/cdrom removable
pciide0: channel 1 ignored (not responding; disabled or no drives?)
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: apic 2 int 18 (irq 255)
pci3 at ppb2 bus 3
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: apic 2 int 19 (irq 255)
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 2 int 17 (irq 255)
pci5 at ppb4 bus 5
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 23 (irq 11)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 19 (irq 11)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18 (irq 10)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 (irq 11)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci6 at ppb5 bus 6
"TI TSB43AB22 FireWire" rev 0x00 at pci6 dev 3 function 0 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801IH LPC" rev 0x02
pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 2 int 21 (irq 11) for native-PCI interrupt
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2 int 18 (irq 10)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide2: using apic 2 int 21 (irq 11) for native-PCI interrupt
wd0 at pciide2 channel 0 drive 0: <ST3160815AS>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/20.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
softraid0 at root
root on wd0a swap on wd0b dump on wd0b

Reply | Threaded
Open this post in threaded view
|

Re: intel(4) slow on G33

Matthieu Herrb
Henry Precheur wrote:

> X11 is slow on my computer. I am not 100% sure, but I believe it started
> when I updated OpenBSD a few weeks ago. The intel(4) driver was updated
> to version 2.7.1.
>
> It's still usable, but it is definitly slower than before. If I hide and
> show Firefox, it takes 1/2 second to redraw.
>
> Any advice on how I could track this problem?
>
> My /var/log/Xorg.0.log & dmesg are below. I don't have a xorg.conf.
>
>

Try again with a more recent snapshot. A problem in libpixman was fixed
last week.

> Cheers,
>
> ---
> /var/log/Xorg.0.log
>
> (--) checkDevMem: using aperture driver /dev/xf86
> (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32)
>
> X.Org X Server 1.5.3
> Release Date: 5 November 2008
> X Protocol Version 11, Revision 0
> Build Operating System: OpenBSD 4.6 amd64
> Current Operating System: OpenBSD banane.novuscom.net 4.6 GENERIC#86 amd64
> Build Date: 23 July 2009  11:59:39AM
>  
> Before reporting problems, check http://wiki.x.org
> to make sure that you have the latest version.
> Markers: (--) probed, (**) from config file, (==) default setting,
> (++) from command line, (!!) notice, (II) informational,
> (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> (==) Log file: "/var/log/Xorg.0.log", Time: Sat Aug  1 21:38:09 2009
> (EE) Unable to locate/open config file
> (II) Loader magic: 0x771560
> (II) Module ABI versions:
> X.Org ANSI C Emulation: 0.4
> X.Org Video Driver: 4.1
> X.Org XInput driver : 2.1
> X.Org Server Extension : 1.1
> X.Org Font Renderer : 0.6
> (II) Loader running on openbsd
> (--) PCI:*(0@0:2:0) Intel 82G33 Video rev 2, Mem @ 0x90300000/524288, 0x80000000/268435456, 0x90200000/1048576, I/O @ 0x00002460/8
> (==) Matched intel for the autoconfigured driver
> New driver is "intel"
> (==) Using default built-in configuration (30 lines)
> (==) --- Start of built-in configuration ---
> Section "Device"
> Identifier "Builtin Default intel Device 0"
> Driver "intel"
> EndSection
> Section "Screen"
> Identifier "Builtin Default intel Screen 0"
> Device "Builtin Default intel Device 0"
> EndSection
> Section "Device"
> Identifier "Builtin Default fbdev Device 0"
> Driver "fbdev"
> EndSection
> Section "Screen"
> Identifier "Builtin Default fbdev Screen 0"
> Device "Builtin Default fbdev Device 0"
> EndSection
> Section "Device"
> Identifier "Builtin Default vesa Device 0"
> Driver "vesa"
> EndSection
> Section "Screen"
> Identifier "Builtin Default vesa Screen 0"
> Device "Builtin Default vesa Device 0"
> EndSection
> Section "ServerLayout"
> Identifier "Builtin Default Layout"
> Screen "Builtin Default intel Screen 0"
> Screen "Builtin Default fbdev Screen 0"
> Screen "Builtin Default vesa Screen 0"
> EndSection
> (==) --- End of built-in configuration ---
> (==) ServerLayout "Builtin Default Layout"
> (**) |-->Screen "Builtin Default intel Screen 0" (0)
> (**) |   |-->Monitor "<default monitor>"
> (**) |   |-->Device "Builtin Default intel Device 0"
> (==) No monitor specified for screen "Builtin Default intel Screen 0".
> Using a default monitor configuration.
> (**) |-->Screen "Builtin Default fbdev Screen 0" (1)
> (**) |   |-->Monitor "<default monitor>"
> (**) |   |-->Device "Builtin Default fbdev Device 0"
> (==) No monitor specified for screen "Builtin Default fbdev Screen 0".
> Using a default monitor configuration.
> (**) |-->Screen "Builtin Default vesa Screen 0" (2)
> (**) |   |-->Monitor "<default monitor>"
> (**) |   |-->Device "Builtin Default vesa Device 0"
> (==) No monitor specified for screen "Builtin Default vesa Screen 0".
> Using a default monitor configuration.
> (==) Not automatically adding devices
> (==) Not automatically enabling devices
> (==) No FontPath specified.  Using compiled-in default.
> (==) FontPath set to:
> /usr/X11R6/lib/X11/fonts/misc/,
> /usr/X11R6/lib/X11/fonts/TTF/,
> /usr/X11R6/lib/X11/fonts/OTF,
> /usr/X11R6/lib/X11/fonts/Type1/,
> /usr/X11R6/lib/X11/fonts/100dpi/,
> /usr/X11R6/lib/X11/fonts/75dpi/
> (==) ModulePath set to "/usr/X11R6/lib/modules"
> (==) |-->Input Device "<default pointer>"
> (==) |-->Input Device "<default keyboard>"
> (==) The core pointer device wasn't specified explicitly in the layout.
> Using the default mouse configuration.
> (==) The core keyboard device wasn't specified explicitly in the layout.
> Using the default keyboard configuration.
> (II) System resource ranges:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (II) LoadModule: "extmod"
>
> (II) Loading /usr/X11R6/lib/modules/extensions//libextmod.so
> (II) Module extmod: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension SHAPE
> (II) Loading extension MIT-SUNDRY-NONSTANDARD
> (II) Loading extension BIG-REQUESTS
> (II) Loading extension SYNC
> (II) Loading extension MIT-SCREEN-SAVER
> (II) Loading extension XC-MISC
> (II) Loading extension XFree86-VidModeExtension
> (II) Loading extension XFree86-Misc
> (II) Loading extension XFree86-DGA
> (II) Loading extension DPMS
> (II) Loading extension TOG-CUP
> (II) Loading extension Extended-Visual-Information
> (II) Loading extension XVideo
> (II) Loading extension XVideo-MotionCompensation
> (II) Loading extension X-Resource
> (II) LoadModule: "dbe"
>
> (II) Loading /usr/X11R6/lib/modules/extensions//libdbe.so
> (II) Module dbe: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> Module class: X.Org Server Extension
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension DOUBLE-BUFFER
> (II) LoadModule: "glx"
>
> (II) Loading /usr/X11R6/lib/modules/extensions//libglx.so
> (II) Module glx: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org Server Extension, version 1.1
> (==) AIGLX enabled
> (==) Exporting typical set of GLX visuals
> (II) Loading extension GLX
> (II) LoadModule: "freetype"
>
> (II) Loading /usr/X11R6/lib/modules/fonts//libfreetype.so
> (II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
> compiled for 1.5.3, module version = 2.1.0
> Module class: X.Org Font Renderer
> ABI class: X.Org Font Renderer, version 0.6
> (II) Loading font FreeType
> (II) LoadModule: "dri"
>
> (II) Loading /usr/X11R6/lib/modules/extensions//libdri.so
> (II) Module dri: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org Server Extension, version 1.1
> (II) Loading extension XFree86-DRI
> (II) LoadModule: "intel"
>
> (II) Loading /usr/X11R6/lib/modules/drivers//intel_drv.so
> (II) Module intel: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 2.7.1
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 4.1
> (II) LoadModule: "fbdev"
>
> (WW) Warning, couldn't open module fbdev
> (II) UnloadModule: "fbdev"
> (EE) Failed to load module "fbdev" (module does not exist, 0)
> (II) LoadModule: "vesa"
>
> (II) Loading /usr/X11R6/lib/modules/drivers//vesa_drv.so
> (II) Module vesa: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 2.2.0
> Module class: X.Org Video Driver
> ABI class: X.Org Video Driver, version 4.1
> (II) LoadModule: "mouse"
>
> (II) Loading /usr/X11R6/lib/modules/input//mouse_drv.so
> (II) Module mouse: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.4.0
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 2.1
> (II) LoadModule: "kbd"
>
> (II) Loading /usr/X11R6/lib/modules/input//kbd_drv.so
> (II) Module kbd: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.3.2
> Module class: X.Org XInput Driver
> ABI class: X.Org XInput driver, version 2.1
> (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
> i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
> E7221 (i915), 915GM, 945G, 945GM, 945GME, IGD_GM, IGD_G, 965G, G35,
> 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
> Mobile IntelB. GM45 Express Chipset,
> Intel Integrated Graphics Device, G45/G43, Q45/Q43, G41
> (II) VESA: driver for VESA chipsets: vesa
> (II) Primary Device is: PCI 00@00:02:0
> (II) resource ranges after xf86ClaimFixedResources() call:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [5] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> (WW) Falling back to old probe method for vesa
> (II) resource ranges after probing:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B]
> [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B]
> [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B]
> [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B]
> [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B]
> (II) Loading sub module "vgahw"
> (II) LoadModule: "vgahw"
>
> (II) Loading /usr/X11R6/lib/modules//libvgahw.so
> (II) Module vgahw: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 0.1.0
> ABI class: X.Org Video Driver, version 4.1
> (II) Loading sub module "ramdac"
> (II) LoadModule: "ramdac"
> (II) Module "ramdac" already built-in
> (II) intel(0): Creating default Display subsection in Screen section
> "Builtin Default intel Screen 0" for depth/fbbpp 24/32
> (==) intel(0): Depth 24, (--) framebuffer bpp 32
> (==) intel(0): RGB weight 888
> (==) intel(0): Default visual is TrueColor
> (II) intel(0): Integrated Graphics Chipset: Intel(R) G33
> (--) intel(0): Chipset: "G33"
> (--) intel(0): Linear framebuffer at 0x80000000
> (--) intel(0): IO registers at addr 0x90300000
> (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
> (==) intel(0): Using EXA for acceleration
> (II) intel(0): 2 display pipes available.
> (II) Loading sub module "ddc"
> (II) LoadModule: "ddc"
> (II) Module "ddc" already built-in
> (II) Loading sub module "i2c"
> (II) LoadModule: "i2c"
> (II) Module "i2c" already built-in
> (II) intel(0): Output VGA has no monitor section
> (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
> (II) intel(0): Resizable framebuffer: not available (1 3)
> (II) intel(0): I2C bus "CRTDDC_A" initialized.
> (II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
> (II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
> (II) intel(0): I2C bus "CRTDDC_A" removed.
> (II) intel(0): EDID vendor "SAM", prod id 627
> (II) intel(0): Using EDID range info for horizontal sync
> (II) intel(0): Using EDID range info for vertical refresh
> (II) intel(0): Printing DDC gathered Modelines:
> (II) intel(0): Modeline "1440x900"x0.0  106.50  1440 1520 1672 1904  900 903 909 934 -hsync +vsync (55.9 kHz)
> (II) intel(0): Modeline "800x600"x0.0   40.00  800 840 968 1056  600 601 605 628 +hsync +vsync (37.9 kHz)
> (II) intel(0): Modeline "800x600"x0.0   36.00  800 824 896 1024  600 601 603 625 +hsync +vsync (35.2 kHz)
> (II) intel(0): Modeline "640x480"x0.0   31.50  640 656 720 840  480 481 484 500 -hsync -vsync (37.5 kHz)
> (II) intel(0): Modeline "640x480"x0.0   31.50  640 664 704 832  480 489 491 520 -hsync -vsync (37.9 kHz)
> (II) intel(0): Modeline "640x480"x0.0   30.24  640 704 768 864  480 483 486 525 -hsync -vsync (35.0 kHz)
> (II) intel(0): Modeline "640x480"x0.0   25.20  640 656 752 800  480 490 492 525 -hsync -vsync (31.5 kHz)
> (II) intel(0): Modeline "720x400"x0.0   28.32  720 738 846 900  400 412 414 449 -hsync +vsync (31.5 kHz)
> (II) intel(0): Modeline "1280x1024"x0.0  135.00  1280 1296 1440 1688  1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
> (II) intel(0): Modeline "1024x768"x0.0   78.80  1024 1040 1136 1312  768 769 772 800 +hsync +vsync (60.1 kHz)
> (II) intel(0): Modeline "1024x768"x0.0   75.00  1024 1048 1184 1328  768 771 777 806 -hsync -vsync (56.5 kHz)
> (II) intel(0): Modeline "1024x768"x0.0   65.00  1024 1048 1184 1344  768 771 777 806 -hsync -vsync (48.4 kHz)
> (II) intel(0): Modeline "832x624"x0.0   57.28  832 864 928 1152  624 625 628 667 -hsync -vsync (49.7 kHz)
> (II) intel(0): Modeline "800x600"x0.0   49.50  800 816 896 1056  600 601 604 625 +hsync +vsync (46.9 kHz)
> (II) intel(0): Modeline "800x600"x0.0   50.00  800 856 976 1040  600 637 643 666 +hsync +vsync (48.1 kHz)
> (II) intel(0): Modeline "1152x864"x0.0  108.00  1152 1216 1344 1600  864 865 868 900 +hsync +vsync (67.5 kHz)
> (II) intel(0): Modeline "1440x900"x60.0  106.47  1440 1520 1672 1904  900 901 904 932 -hsync +vsync (55.9 kHz)
> (II) intel(0): Modeline "1440x900"x75.0  136.49  1440 1536 1688 1936  900 901 904 940 -hsync +vsync (70.5 kHz)
> (II) intel(0): Modeline "1280x1024"x60.0  108.88  1280 1360 1496 1712  1024 1025 1028 1060 -hsync +vsync (63.6 kHz)
> (II) intel(0): Modeline "1280x960"x60.0  102.10  1280 1360 1496 1712  960 961 964 994 -hsync +vsync (59.6 kHz)
> (II) intel(0): Modeline "1152x864"x75.0  104.99  1152 1224 1352 1552  864 865 868 902 -hsync +vsync (67.7 kHz)
> (II) intel(0): EDID vendor "SAM", prod id 627
> (II) intel(0): Output VGA connected
> (II) intel(0): Using exact sizes for initial modes
> (II) intel(0): Output VGA using initial mode 1440x900
> (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
> (II) intel(0): detected 1024 kB GTT.
> (II) intel(0): detected 7164 kB stolen memory.
> (==) intel(0): video overlay key set to 0x101fe
> (==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
> (**) intel(0): Display dimensions: (410, 260) mm
> (**) intel(0): DPI set to (89, 140)
> (II) Loading sub module "fb"
> (II) LoadModule: "fb"
>
> (II) Loading /usr/X11R6/lib/modules//libfb.so
> (II) Module fb: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 1.0.0
> ABI class: X.Org ANSI C Emulation, version 0.4
> (II) Loading sub module "exa"
> (II) LoadModule: "exa"
>
> (II) Loading /usr/X11R6/lib/modules//libexa.so
> (II) Module exa: vendor="X.Org Foundation"
> compiled for 1.5.3, module version = 2.4.0
> ABI class: X.Org Video Driver, version 4.1
> (II) intel(0): Comparing regs from server start up to After PreInit
> (II) UnloadModule: "vesa"
> (II) Unloading /usr/X11R6/lib/modules/drivers//vesa_drv.so
> (==) Depth 24 pixmap format is 32 bpp
> (II) do I need RAC?  No, I don't.
> (II) resource ranges after preInit:
> [0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[B]E(B)
> [1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[B]
> [2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[B]
> [3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[B]
> [4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[B](OprD)
> [5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[B](OprD)
> [6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[B](OprD)
> [7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[B]
> [8] -1 0 0x00000000 - 0x000000ff (0x100) IX[B]
> [9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[B](OprU)
> [10] 0 0 0x000003c0 - 0x000003df (0x20) IS[B](OprU)
> (II) intel(0): Kernel reported 491520 total, 0 used
> (II) intel(0): I830CheckAvailableMemory: 1966080 kB available
> drmOpenDevice: node name is /dev/drm0
> drmOpenDevice: open result is 13, (OK)
> drmOpenDevice: node name is /dev/drm0
> drmOpenDevice: open result is 13, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> drmOpenDevice: node name is /dev/drm0
> drmOpenDevice: open result is 13, (OK)
> drmOpenByBusid: drmOpenMinor returns 13
> drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> (II) [drm] DRM interface version 1.2
> (II) [drm] DRM open master succeeded.
> (II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
> (II) intel(0): [drm] framebuffer mapped by ddx driver
> (II) intel(0): [drm] added 1 reserved context for kernel
> (II) intel(0): X context handle = 0x1
> (II) intel(0): [drm] installed DRM signal handler
> (**) intel(0): Framebuffer compression disabled
> (**) intel(0): Tiling enabled
> (==) intel(0): VideoRam: 262144 KB
> (II) intel(0): Attempting memory allocation with tiled buffers.
> (II) intel(0): Tiled allocation successful.
> (II) intel(0): [drm] Registers = 0x40002000
> (II) intel(0): [drm] ring buffer = 0x40082000
> (II) intel(0): [drm] mapped front buffer at 0x81000000, handle = 0x400a2000
> (II) intel(0): [drm] mapped back buffer at 0x85000000, handle = 0x40be2000
> (II) intel(0): [drm] mapped depth buffer at 0x86000000, handle = 0x41be2000
> (II) intel(0): [drm] mapped classic textures at 0x87000000, handle = 0x42be2000
> (II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
> (II) intel(0): [dri] visual configs initialized
> (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
> (==) intel(0): Write-combining range (0xa0000,0x10000) was already clear
> (II) EXA(0): Offscreen pixmap area of 35389440 bytes
> (II) EXA(0): Driver registered support for the following operations:
> (II)         Solid
> (II)         Copy
> (II)         Composite (RENDER acceleration)
> (==) intel(0): Backing store disabled
> (==) intel(0): Silken mouse enabled
> (II) intel(0): Initializing HW Cursor
> (II) intel(0): [DRI] installation complete
> (II) intel(0): xf86BindGARTMemory: bind key 0 at 0x006ff000 (pgoffset 1791)
> (II) intel(0): xf86BindGARTMemory: bind key 1 at 0x0082a000 (pgoffset 2090)
> (II) intel(0): xf86BindGARTMemory: bind key 4 at 0x0082b000 (pgoffset 2091)
> (II) intel(0): xf86BindGARTMemory: bind key 2 at 0x01000000 (pgoffset 4096)
> (II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02000000 (pgoffset 8192)
> (II) intel(0): xf86BindGARTMemory: bind key 5 at 0x05000000 (pgoffset 20480)
> (II) intel(0): xf86BindGARTMemory: bind key 6 at 0x06000000 (pgoffset 24576)
> (II) intel(0): xf86BindGARTMemory: bind key 7 at 0x07000000 (pgoffset 28672)
> (II) intel(0): Fixed memory allocation layout:
> (II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
> (II) intel(0): 0x00020000-0x00029fff: HW cursors (40 kB)
> (II) intel(0): 0x0002a000-0x00829fff: fake bufmgr (8192 kB)
> (II) intel(0): 0x006ff000:            end of stolen memory
> (II) intel(0): 0x0082a000-0x0082afff: overlay registers (4 kB)
> (II) intel(0): 0x0082b000-0x0082bfff: HW status (4 kB)
> (II) intel(0): 0x01000000-0x01ffffff: front buffer (16384 kB) X tiled
> (II) intel(0): 0x02000000-0x041bffff: exa offscreen (34560 kB)
> (II) intel(0): 0x05000000-0x05ffffff: back buffer (16384 kB) X tiled
> (II) intel(0): 0x06000000-0x06ffffff: depth buffer (16384 kB) X tiled
> (II) intel(0): 0x07000000-0x08ffffff: classic textures (32768 kB)
> (II) intel(0): 0x10000000:            end of aperture
> (II) intel(0): Output configuration:
> (II) intel(0):   Pipe A is on
> (II) intel(0):   Display plane A is now enabled and connected to pipe A.
> (II) intel(0):   Pipe B is off
> (II) intel(0):   Display plane B is now disabled and connected to pipe B.
> (II) intel(0):   Output VGA is connected to pipe A
> (II) intel(0): [drm] dma control initialized, using IRQ 11
> (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
> (II) intel(0): DPMS enabled
> (==) intel(0): Intel XvMC decoder disabled
> (II) intel(0): Set up textured video
> (II) intel(0): Set up overlay video
> (II) intel(0): direct rendering: XF86DRI Enabled
> (--) RandR disabled
> (II) Initializing built-in extension MIT-SHM
> (II) Initializing built-in extension XInputExtension
> (II) Initializing built-in extension XTEST
> (II) Initializing built-in extension XKEYBOARD
> (II) Initializing built-in extension XINERAMA
> (II) Initializing built-in extension XFIXES
> (II) Initializing built-in extension RENDER
> (II) Initializing built-in extension RANDR
> (II) Initializing built-in extension COMPOSITE
> (II) Initializing built-in extension DAMAGE
> (II) Initializing built-in extension XEVIE
> drmOpenDevice: node name is /dev/drm0
> drmOpenDevice: open result is 14, (OK)
> drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> drmOpenDevice: node name is /dev/drm0
> drmOpenDevice: open result is 14, (OK)
> drmOpenByBusid: drmOpenMinor returns 14
> drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
> (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
> (II) AIGLX: enabled GLX_texture_from_pixmap with driver support
> (II) AIGLX: Loaded and initialized /usr/X11R6/lib/modules/dri/i915_dri.so
> (II) GLX: Initialized DRI GL provider for screen 0
> (II) intel(0): Setting screen physical size to 410 x 257
> (WW) <default pointer>: No Device specified, looking for one...
> (II) <default pointer>: found Device "/dev/wsmouse"
> (**) <default pointer>: Protocol: WSMouse
> (**) Option "CorePointer"
> (**) <default pointer>: always reports core events
> (**) Option "Device" "/dev/wsmouse"
> (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
> (**) <default pointer>: ZAxisMapping: buttons 4 and 5
> (**) <default pointer>: Buttons: 9
> (**) Option "CoreKeyboard"
> (**) <default keyboard>: always reports core events
> (**) Option "Protocol" "standard"
> (**) <default keyboard>: Protocol: standard
> (--) <default keyboard>: using wscons layout us
> (**) Option "AutoRepeat" "500 30"
> (**) Option "XkbRules" "xorg"
> (**) <default keyboard>: XkbRules: "xorg"
> (**) Option "XkbModel" "pc105"
> (**) <default keyboard>: XkbModel: "pc105"
> (**) Option "XkbLayout" "us"
> (**) <default keyboard>: XkbLayout: "us"
> (**) Option "CustomKeycodes" "off"
> (**) <default keyboard>: CustomKeycodes disabled
> (II) evaluating device (<default pointer>)
> (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE)
> (II) evaluating device (<default keyboard>)
> (II) XINPUT: Adding extended input device "<default keyboard>" (type: KEYBOARD)
> (II) 3rd Button detected: disabling emulate3Button
>
> ---
> dmesg
>
>
> OpenBSD 4.6-current (GENERIC) #86: Mon Jul 27 14:59:03 MDT 2009
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC
> real mem = 2116874240 (2018MB)
> avail mem = 2042974208 (1948MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xe33f0 (32 entries)
> bios0: vendor Intel Corp. version "DPP3510J.86A.0517.2009.0107.2203" date 01/07/2009
> bios0: Intel Corporation DG33BU
> acpi0 at bios0: rev 0
> acpi0: tables DSDT FACP APIC WDDT MCFG ASF! ASPT WDTT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT SSDT
> acpi0: wakeup devices SLPB(S4) P32_(S4) ECIR(S4) UAR1(S4) ILAN(S4) PEGP(S4) PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3) UHC3(S3) UHC4(S3) EHCI(S3) EHC2(S3) UH42(S3) UHC5(S3) UHC6(S3) AZAL(S3)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Pentium(R) Dual CPU E2140 @ 1.60GHz, 1600.28 MHz
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,EST,TM2,CX16,xTPR,NXE,LONG
> cpu0: 1MB 64b/line 4-way L2 cache
> cpu0: apic clock running at 202MHz
> cpu at mainbus0: not configured
> ioapic0 at mainbus0 apid 2 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 2
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 6 (P32_)
> acpiprt2 at acpi0: bus 1 (PEX0)
> acpiprt3 at acpi0: bus 2 (PEX1)
> acpiprt4 at acpi0: bus 3 (PEX2)
> acpiprt5 at acpi0: bus 4 (PEX3)
> acpiprt6 at acpi0: bus 5 (PEX4)
> acpiprt7 at acpi0: bus -1 (PEX5)
> acpicpu0 at acpi0: C1, PSS
> acpibtn0 at acpi0: SLPB
> cpu0: Enhanced SpeedStep 1600 MHz: speeds: 1600, 1400, 1200 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel 82G33 Host" rev 0x02
> vga1 at pci0 dev 2 function 0 "Intel 82G33 Video" rev 0x02
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0x80000000, size 0x10000000
> inteldrm0 at vga1: apic 2 int 16 (irq 11)
> drm0 at inteldrm0
> "Intel 82G33 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
> em0 at pci0 dev 25 function 0 "Intel ICH9 IGP C" rev 0x02: apic 2 int 20 (irq 9), address 00:1c:c0:0c:bf:23
> uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 18 (irq 10)
> uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 21 (irq 11)
> uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 17 (irq 9)
> ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 17 (irq 9)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 82801I HD Audio" rev 0x02: apic 2 int 22 (irq 10)
> azalia0: codecs: Realtek ALC888
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 2 int 17 (irq 255)
> pci1 at ppb0 bus 1
> ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x02: apic 2 int 20 (irq 255)
> pci2 at ppb1 bus 2
> pciide0 at pci2 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb2: DMA (unsupported), channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using apic 2 int 17 (irq 9) for native-PCI interrupt
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, DVD-RAM GSA-H55N, 1.03> ATAPI 5/cdrom removable
> pciide0: channel 1 ignored (not responding; disabled or no drives?)
> ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: apic 2 int 18 (irq 255)
> pci3 at ppb2 bus 3
> ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: apic 2 int 19 (irq 255)
> pci4 at ppb3 bus 4
> ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 2 int 17 (irq 255)
> pci5 at ppb4 bus 5
> uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 2 int 23 (irq 11)
> uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 2 int 19 (irq 11)
> uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 2 int 18 (irq 10)
> ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 2 int 23 (irq 11)
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
> pci6 at ppb5 bus 6
> "TI TSB43AB22 FireWire" rev 0x00 at pci6 dev 3 function 0 not configured
> pcib0 at pci0 dev 31 function 0 "Intel 82801IH LPC" rev 0x02
> pciide1 at pci0 dev 31 function 2 "Intel 82801I SATA" rev 0x02: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using apic 2 int 21 (irq 11) for native-PCI interrupt
> ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 2 int 18 (irq 10)
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
> spdmem1 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
> pciide2 at pci0 dev 31 function 5 "Intel 82801I SATA" rev 0x02: DMA, channel 0 wired to native-PCI, channel 1 wired to native-PCI
> pciide2: using apic 2 int 21 (irq 11) for native-PCI interrupt
> wd0 at pciide2 channel 0 drive 0: <ST3160815AS>
> wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
> wd0(pciide2:0:0): using PIO mode 4, Ultra-DMA mode 5
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb7 at uhci5: USB revision 1.0
> uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> mtrr: Pentium Pro MTRR support
> uhidev0 at uhub4 port 1 configuration 1 interface 0 "Logitech USB-PS/2 Optical Mouse" rev 2.00/20.00 addr 2
> uhidev0: iclass 3/1
> ums0 at uhidev0: 3 buttons, Z dir
> wsmouse0 at ums0 mux 0
> softraid0 at root
> root on wd0a swap on wd0b dump on wd0b
>


--
Matthieu Herrb

Reply | Threaded
Open this post in threaded view
|

Re: intel(4) slow on G33

Henry Precheur
On Sun, Aug 02, 2009 at 11:27:09AM +0200, Matthieu Herrb wrote:
> Try again with a more recent snapshot. A problem in libpixman was fixed
> last week.

Problem fixed! Thanks!

--
  Henry Prjcheur