Quantcast

/install: doas: not found

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

/install: doas: not found

Jan Stary
This is the latest miniroot-am335x-60.fs (Sep 4 from ftp.openbsd.org)
installing on BBB from the SD card. The installation eventually fails with

        //install: doas: not found

Is this simply an omission?
Or am I missing something obvious?

        Jan




Script started on Mon Sep  5 12:26:59 2016
#
# cu -l /dev/ttyU0 -115200
Connected to /dev/ttyU0 (speed 115200)

# install
At any prompt except password prompts you can escape to a shell by
typing '!'. Default answers are shown in []'s and are selected by
pressing RETURN.  You can exit this program at any time by pressing
Control-C, but this can leave your system in an inconsistent state.

Terminal type? [vt220]
System hostname? (short form, e.g. 'foo') [bbb]

Available network interfaces are: cpsw0.
Which network interface do you wish to configure? (or 'done') [cpsw0]
IPv4 address for cpsw0? (or 'dhcp' or 'none') [dhcp]
DHCPREQUEST on cpsw0 to 255.255.255.255
DHCPACK from 192.168.44.1 (68:05:ca:33:6a:61)
bound to 192.168.44.2 -- renewal in 300 seconds.
IPv6 address for cpsw0? (or 'rtsol' or 'none') [none]
Available network interfaces are: cpsw0.
Which network interface do you wish to configure? (or 'done') [done]
Using DNS domainname stare.cz
Using DNS nameservers at 192.168.44.1 147.32.232.234

Password for root account? (will not echo)
Password for root account? (again)
Start sshd(8) by default? [yes]
Setup a user? (enter a lower-case loginname, or 'no') [no]
Since no user was setup, root logins via sshd(8) might be useful.
WARNING: root is targeted by password guessing attacks, pubkeys are safer.
Allow root ssh login? (yes, no, prohibit-password) [no]

Available disks are: sd0 sd1.
Which disk is the root disk? ('?' for details) [sd0] ?
sd0: SD/MMC (15.6G)
sd1: SD/MMC MMC02G (1.8G)
Available disks are: sd0 sd1.
Which disk is the root disk? ('?' for details) [sd0] sd1
Disk: sd1 geometry: 233/255/63 [3751936 Sectors]
Offset: 0 Signature: 0xAA55
            Starting     Ending    LBA Info:
 #: id    C H   S -     C H   S [       start:     size ]
-------------------------------------------------------------------------------
*0: 0C    0  32  33 -     2 42  40 [ 2048:    32768 ] Win95 FAT32L
 1: 00    0 0   0 -     0 0   0 [   0: 0 ] unused
 2: 00    0 0   0 -     0 0   0 [   0: 0 ] unused
 3: A6    2  42  41 -   233 139  34 [       34816:  3717120 ] OpenBSD
Use (W)hole disk$ or (E)dit the MBR? [whole] w
Creating a msdos partition and an OpenBSD partition for rest of sd1...done.
/dev/rsd1i: 32668 sectors in 8167 FAT16 clusters (2048 bytes/cluster)
bps=512 spc=4 res=1 nft=2 rde=512 sec=32768 mid=0xf8 spf=32 spt=63 hds=255 hid=2048
The auto-allocated layout for sd1 is:
# size offset fstype [fsize bsize   cpg]
  a:      1758.3M 34816 4.2BSD 2048 16384 1 # /
  b: 56.7M       3635744  swap
  c:      1832.0M     0 unused
  i: 16.0M  2048 MSDOS
Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a] a
/dev/rsd1a: 1758.3MB in 3600928 sectors of 512 bytes
9 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
Available disks are: sd0.
Which disk do you wish to initialize? (or 'done') [done]
/dev/sd1a (0410d1c6ebccbaed.a) on /mnt type ffs (rw, asynchronous, local)

Let's install the sets!
Location of sets? (disk http nfs or 'done') [http]
HTTP proxy URL? (e.g. '<a href="http://proxy:8080'">http://proxy:8080', or 'none') [none]
(Unable to get list from ftp.openbsd.org, but that is OK)
HTTP Server? (hostname or 'done') ftp.openbsd.org
Server directory? [pub/OpenBSD/snapshots/armv7]
//install: doas: not found
Looked at http://ftp.openbsd.org/pub/OpenBSD/snapshots/armv7 and found no OpenBSD/armv7 6.0 sets.  The set names looked for were:
    bsd      comp60.tgz xshare60.tgz  site60-bbb.tgz
    bsd.rd      man60.tgz xfont60.tgz
    bsd.mp      game60.tgz xserv60.tgz
    base60.tgz      xbase60.tgz site60.tgz

Location of sets? (disk http nfs or 'done') [http] ^C

# ^D
erase ^?, werase ^W, kill ^U, intr ^C, status ^T

Welcome to the OpenBSD/armv7 6.0 installation program.
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell? ~.H^HH^H
(I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
[EOT]
#
# ^D

Script done on Mon Sep 5 12:28:40 2016

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: /install: doas: not found

Jonathan Gray-11
Fixed in http://marc.info/?l=openbsd-cvs&m=147299292309164&w=2

There is unlikely to be another snapshot for a few days now
though as everyone who builds them is travelling.

On Mon, Sep 05, 2016 at 12:32:25PM +0200, Jan Stary wrote:

> This is the latest miniroot-am335x-60.fs (Sep 4 from ftp.openbsd.org)
> installing on BBB from the SD card. The installation eventually fails with
>
> //install: doas: not found
>
> Is this simply an omission?
> Or am I missing something obvious?
>
> Jan
>
>
>
>
> Script started on Mon Sep  5 12:26:59 2016
> #
> # cu -l /dev/ttyU0 -115200
> Connected to /dev/ttyU0 (speed 115200)
>
> # install
> At any prompt except password prompts you can escape to a shell by
> typing '!'. Default answers are shown in []'s and are selected by
> pressing RETURN.  You can exit this program at any time by pressing
> Control-C, but this can leave your system in an inconsistent state.
>
> Terminal type? [vt220]
> System hostname? (short form, e.g. 'foo') [bbb]
>
> Available network interfaces are: cpsw0.
> Which network interface do you wish to configure? (or 'done') [cpsw0]
> IPv4 address for cpsw0? (or 'dhcp' or 'none') [dhcp]
> DHCPREQUEST on cpsw0 to 255.255.255.255
> DHCPACK from 192.168.44.1 (68:05:ca:33:6a:61)
> bound to 192.168.44.2 -- renewal in 300 seconds.
> IPv6 address for cpsw0? (or 'rtsol' or 'none') [none]
> Available network interfaces are: cpsw0.
> Which network interface do you wish to configure? (or 'done') [done]
> Using DNS domainname stare.cz
> Using DNS nameservers at 192.168.44.1 147.32.232.234
>
> Password for root account? (will not echo)
> Password for root account? (again)
> Start sshd(8) by default? [yes]
> Setup a user? (enter a lower-case loginname, or 'no') [no]
> Since no user was setup, root logins via sshd(8) might be useful.
> WARNING: root is targeted by password guessing attacks, pubkeys are safer.
> Allow root ssh login? (yes, no, prohibit-password) [no]
>
> Available disks are: sd0 sd1.
> Which disk is the root disk? ('?' for details) [sd0] ?
> sd0: SD/MMC (15.6G)
> sd1: SD/MMC MMC02G (1.8G)
> Available disks are: sd0 sd1.
> Which disk is the root disk? ('?' for details) [sd0] sd1
> Disk: sd1 geometry: 233/255/63 [3751936 Sectors]
> Offset: 0 Signature: 0xAA55
>    Starting     Ending    LBA Info:
>  #: id    C H   S -     C H   S [       start:     size ]
> -------------------------------------------------------------------------------
> *0: 0C    0  32  33 -     2 42  40 [ 2048:    32768 ] Win95 FAT32L
>  1: 00    0 0   0 -     0 0   0 [   0: 0 ] unused
>  2: 00    0 0   0 -     0 0   0 [   0: 0 ] unused
>  3: A6    2  42  41 -   233 139  34 [       34816:  3717120 ] OpenBSD
> Use (W)hole disk$ or (E)dit the MBR? [whole] w
> Creating a msdos partition and an OpenBSD partition for rest of sd1...done.
> /dev/rsd1i: 32668 sectors in 8167 FAT16 clusters (2048 bytes/cluster)
> bps=512 spc=4 res=1 nft=2 rde=512 sec=32768 mid=0xf8 spf=32 spt=63 hds=255 hid=2048
> The auto-allocated layout for sd1 is:
> # size offset fstype [fsize bsize   cpg]
>   a:      1758.3M 34816 4.2BSD 2048 16384 1 # /
>   b: 56.7M       3635744  swap
>   c:      1832.0M     0 unused
>   i: 16.0M  2048 MSDOS
> Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a] a
> /dev/rsd1a: 1758.3MB in 3600928 sectors of 512 bytes
> 9 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> Available disks are: sd0.
> Which disk do you wish to initialize? (or 'done') [done]
> /dev/sd1a (0410d1c6ebccbaed.a) on /mnt type ffs (rw, asynchronous, local)
>
> Let's install the sets!
> Location of sets? (disk http nfs or 'done') [http]
> HTTP proxy URL? (e.g. '<a href="http://proxy:8080'">http://proxy:8080', or 'none') [none]
> (Unable to get list from ftp.openbsd.org, but that is OK)
> HTTP Server? (hostname or 'done') ftp.openbsd.org
> Server directory? [pub/OpenBSD/snapshots/armv7]
> //install: doas: not found
> Looked at http://ftp.openbsd.org/pub/OpenBSD/snapshots/armv7 and found no OpenBSD/armv7 6.0 sets.  The set names looked for were:
>     bsd      comp60.tgz xshare60.tgz  site60-bbb.tgz
>     bsd.rd      man60.tgz xfont60.tgz
>     bsd.mp      game60.tgz xserv60.tgz
>     base60.tgz      xbase60.tgz site60.tgz
>
> Location of sets? (disk http nfs or 'done') [http] ^C
>
> # ^D
> erase ^?, werase ^W, kill ^U, intr ^C, status ^T
>
> Welcome to the OpenBSD/armv7 6.0 installation program.
> (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? ~.H^HH^H
> (I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
> [EOT]
> #
> # ^D
>
> Script done on Mon Sep 5 12:28:40 2016
>

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: /install: doas: not found

Jan Stary
On Sep 05 20:50:01, [hidden email] wrote:
> Fixed in http://marc.info/?l=openbsd-cvs&m=147299292309164&w=2
>
> There is unlikely to be another snapshot for a few days now
> though as everyone who builds them is travelling.

The Sep 7 snapshot indeed solves this, tahnks.

        Jan

> On Mon, Sep 05, 2016 at 12:32:25PM +0200, Jan Stary wrote:
> > This is the latest miniroot-am335x-60.fs (Sep 4 from ftp.openbsd.org)
> > installing on BBB from the SD card. The installation eventually fails with
> >
> > //install: doas: not found
> >
> > Is this simply an omission?
> > Or am I missing something obvious?
> >
> > Jan
> >
> >
> >
> >
> > Script started on Mon Sep  5 12:26:59 2016
> > #
> > # cu -l /dev/ttyU0 -115200
> > Connected to /dev/ttyU0 (speed 115200)
> >
> > # install
> > At any prompt except password prompts you can escape to a shell by
> > typing '!'. Default answers are shown in []'s and are selected by
> > pressing RETURN.  You can exit this program at any time by pressing
> > Control-C, but this can leave your system in an inconsistent state.
> >
> > Terminal type? [vt220]
> > System hostname? (short form, e.g. 'foo') [bbb]
> >
> > Available network interfaces are: cpsw0.
> > Which network interface do you wish to configure? (or 'done') [cpsw0]
> > IPv4 address for cpsw0? (or 'dhcp' or 'none') [dhcp]
> > DHCPREQUEST on cpsw0 to 255.255.255.255
> > DHCPACK from 192.168.44.1 (68:05:ca:33:6a:61)
> > bound to 192.168.44.2 -- renewal in 300 seconds.
> > IPv6 address for cpsw0? (or 'rtsol' or 'none') [none]
> > Available network interfaces are: cpsw0.
> > Which network interface do you wish to configure? (or 'done') [done]
> > Using DNS domainname stare.cz
> > Using DNS nameservers at 192.168.44.1 147.32.232.234
> >
> > Password for root account? (will not echo)
> > Password for root account? (again)
> > Start sshd(8) by default? [yes]
> > Setup a user? (enter a lower-case loginname, or 'no') [no]
> > Since no user was setup, root logins via sshd(8) might be useful.
> > WARNING: root is targeted by password guessing attacks, pubkeys are safer.
> > Allow root ssh login? (yes, no, prohibit-password) [no]
> >
> > Available disks are: sd0 sd1.
> > Which disk is the root disk? ('?' for details) [sd0] ?
> > sd0: SD/MMC (15.6G)
> > sd1: SD/MMC MMC02G (1.8G)
> > Available disks are: sd0 sd1.
> > Which disk is the root disk? ('?' for details) [sd0] sd1
> > Disk: sd1 geometry: 233/255/63 [3751936 Sectors]
> > Offset: 0 Signature: 0xAA55
> >    Starting     Ending    LBA Info:
> >  #: id    C H   S -     C H   S [       start:     size ]
> > -------------------------------------------------------------------------------
> > *0: 0C    0  32  33 -     2 42  40 [ 2048:    32768 ] Win95 FAT32L
> >  1: 00    0 0   0 -     0 0   0 [   0: 0 ] unused
> >  2: 00    0 0   0 -     0 0   0 [   0: 0 ] unused
> >  3: A6    2  42  41 -   233 139  34 [       34816:  3717120 ] OpenBSD
> > Use (W)hole disk$ or (E)dit the MBR? [whole] w
> > Creating a msdos partition and an OpenBSD partition for rest of sd1...done.
> > /dev/rsd1i: 32668 sectors in 8167 FAT16 clusters (2048 bytes/cluster)
> > bps=512 spc=4 res=1 nft=2 rde=512 sec=32768 mid=0xf8 spf=32 spt=63 hds=255 hid=2048
> > The auto-allocated layout for sd1 is:
> > # size offset fstype [fsize bsize   cpg]
> >   a:      1758.3M 34816 4.2BSD 2048 16384 1 # /
> >   b: 56.7M       3635744  swap
> >   c:      1832.0M     0 unused
> >   i: 16.0M  2048 MSDOS
> > Use (A)uto layout, (E)dit auto layout, or create (C)ustom layout? [a] a
> > /dev/rsd1a: 1758.3MB in 3600928 sectors of 512 bytes
> > 9 cylinder groups of 202.47MB, 12958 blocks, 25984 inodes each
> > Available disks are: sd0.
> > Which disk do you wish to initialize? (or 'done') [done]
> > /dev/sd1a (0410d1c6ebccbaed.a) on /mnt type ffs (rw, asynchronous, local)
> >
> > Let's install the sets!
> > Location of sets? (disk http nfs or 'done') [http]
> > HTTP proxy URL? (e.g. '<a href="http://proxy:8080'">http://proxy:8080', or 'none') [none]
> > (Unable to get list from ftp.openbsd.org, but that is OK)
> > HTTP Server? (hostname or 'done') ftp.openbsd.org
> > Server directory? [pub/OpenBSD/snapshots/armv7]
> > //install: doas: not found
> > Looked at http://ftp.openbsd.org/pub/OpenBSD/snapshots/armv7 and found no OpenBSD/armv7 6.0 sets.  The set names looked for were:
> >     bsd      comp60.tgz xshare60.tgz  site60-bbb.tgz
> >     bsd.rd      man60.tgz xfont60.tgz
> >     bsd.mp      game60.tgz xserv60.tgz
> >     base60.tgz      xbase60.tgz site60.tgz
> >
> > Location of sets? (disk http nfs or 'done') [http] ^C
> >
> > # ^D
> > erase ^?, werase ^W, kill ^U, intr ^C, status ^T
> >
> > Welcome to the OpenBSD/armv7 6.0 installation program.
> > (I)nstall, (U)pgrade, (A)utoinstall or (S)hell? ~.H^HH^H
> > (I)nstall, (U)pgrade, (A)utoinstall or (S)hell?
> > [EOT]
> > #
> > # ^D
> >
> > Script done on Mon Sep 5 12:28:40 2016
> >

Loading...