ifconfig -a shows only first ip address in 6.0 - bug or feature?

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

ifconfig -a shows only first ip address in 6.0 - bug or feature?

janus
Hello OpenBSD team,

I've got a SPARC64 (Sun Fire V245) box with two-link LACP trunk setup and 4 IP addresses on that
interface.
`ifconfig -a' output shows only the first IP in the list, while running `ifconfig trunk0' shows
the expected output of all 4 assigned IP addresses. Is this intended
behavior?

i.e.:

        inet 111.222.333.32 netmask 0xffffff00 broadcast 111.222.333.255

vs.

        inet 111.222.333.32 netmask 0xffffff00 broadcast 111.222.333.255
        inet 111.222.333.33 netmask 0xffffff00 broadcast 111.222.333.255
        inet 111.222.333.34 netmask 0xffffff00 broadcast 111.222.333.255
        inet 111.222.333.35 netmask 0xffffff00 broadcast 111.222.333.255

I've substituted the first three bytes in IP addressess to 111,222 and 333
and real domain to `domain' in dmesg.

Output of ifconfig -a, ifconfig trunk0 and dmesg follows (running 6.0
-stable with all errata for 6.0 applied  ) ; sections
divided by ###

Thank you and have a nice day,
Jan

### ifconfig -a ###
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768
        index 6 priority 0 llprio 3
        groups: lo
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
        inet 127.0.0.1 netmask 0xff000000
bge0: flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:14:4f:6f:f6:52
        index 1 priority 0 llprio 3
        trunk: trunkdev trunk0
        media: Ethernet autoselect (1000baseT full-duplex)
        status: active
bge1: flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:14:4f:6f:f6:52
        index 2 priority 0 llprio 3
        trunk: trunkdev trunk0
        media: Ethernet autoselect (1000baseT full-duplex)
        status: active
bge2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:14:4f:6f:f6:54
        index 3 priority 0 llprio 3
        media: Ethernet autoselect (none)
        status: no carrier
bge3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:14:4f:6f:f6:55
        index 4 priority 0 llprio 3
        media: Ethernet autoselect (none)
        status: no carrier
enc0: flags=0<>
        index 5 priority 0 llprio 3
        groups: enc
        status: active
trunk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:14:4f:6f:f6:52
        index 7 priority 0 llprio 3
        trunk: trunkproto lacp
        trunk id: [(8000,00:14:4f:6f:f6:52,403C,0000,0000),
                 (8000,5c:8a:38:c4:49:c4,0009,0000,0000)]
                trunkport bge1 active,collecting,distributing
                trunkport bge0 active,collecting,distributing
        groups: trunk egress
        media: Ethernet autoselect
        status: active
        inet 111.222.333.32 netmask 0xffffff00 broadcast 111.222.333.255
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33144
        index 8 priority 0 llprio 3
        groups: pflog
###

### ifconfig trunk0 ###

trunk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        lladdr 00:14:4f:6f:f6:52
        index 7 priority 0 llprio 3
        trunk: trunkproto lacp
        trunk id: [(8000,00:14:4f:6f:f6:52,403C,0000,0000),
                 (8000,5c:8a:38:c4:49:c4,0009,0000,0000)]
                trunkport bge1 active,collecting,distributing
                trunkport bge0 active,collecting,distributing
        groups: trunk egress
        media: Ethernet autoselect
        status: active
        inet 111.222.333.32 netmask 0xffffff00 broadcast 111.222.333.255
        inet 111.222.333.33 netmask 0xffffff00 broadcast 111.222.333.255
        inet 111.222.333.34 netmask 0xffffff00 broadcast 111.222.333.255
        inet 111.222.333.35 netmask 0xffffff00 broadcast 111.222.333.255
###

### dmesg ###
console is /ebus@1f,464000/serial@2,80
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2016 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 6.0 (GENERIC.MP) #1171: Tue Jul 26 17:03:19 MDT 2016
    [hidden email]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 4294967296 (4096MB)
avail mem = 4204707840 (4009MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Sun Fire V245
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz
cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
"memory-controller" at mainbus0 not configured
"memory-controller" at mainbus0 not configured
pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 13
pyro0: dvma map c0000000-ffffffff
pci0 at pyro0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xba
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xba
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00
pci3 at ppb2 bus 5
ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
ebus0 at pci3 dev 30 function 0 "Acer Labs M1575 ISA" rev 0x00
rtc0 at ebus0 addr 70-73: m5823
pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x784 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-845S, D100> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xba: msi
pci4 at ppb3 bus 6
ppb4 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xba: msi
pci5 at ppb4 bus 7
ppb5 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xba
pci6 at ppb5 bus 8
ppb6 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci7 at ppb6 bus 9
bge0 at pci7 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x795, address 00:14:4f:6f:f6:52
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci7 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x796, address 00:14:4f:6f:f6:53
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb7 at pci7 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
pci8 at ppb7 bus 10
ppb8 at pci1 dev 10 function 0 "PLX PEX 8532" rev 0xba
pci9 at ppb8 bus 11
ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci10 at ppb9 bus 12
bge2 at pci10 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x796, address 00:14:4f:6f:f6:54
brgphy2 at bge2 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge3 at pci10 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x797, address 00:14:4f:6f:f6:55
brgphy3 at bge3 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb10 at pci10 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
pci11 at ppb10 bus 13
mpi0 at pci11 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi
mpi0: SAS1064, firmware 1.8.4.0
scsibus2 at mpi0: 63 targets
sd0 at scsibus2 targ 0 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct fixed naa.600508e000000000a55e8bbf59315a08
sd0: 279890MB, 512 bytes/sector, 573214720 sectors
pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 4
pyro1: dvma map c0000000-ffffffff
pci12 at pyro1
ppb11 at pci12 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
pci13 at ppb11 bus 3
ppb12 at pci12 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
pci14 at ppb12 bus 4
radeondrm0 at pci14 dev 1 function 0 "ATI Radeon VE" rev 0x00
drm0 at radeondrm0
radeondrm0: ivec 0x7cb
ebus1 at mainbus0
"flashprom" at ebus1 addr 0-1fffff not configured
com0 at ebus1 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo
com0: console
com1 at ebus1 addr 40-47 ivec 0x7c9: ns16550a, 16 byte fifo
"rmc-comm" at ebus1 addr 0-7 ivec 0x7ca not configured
"gpio" at ebus1 addr c0-c0 not configured
led0 at ebus1 addr 0-80: rev 0x5a
power0 at ebus1 addr 40-c1 ivec 0x7c3
"i2c" at mainbus0 not configured
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent Dell 03R874" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd0 at ukbd0 mux 1
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent Dell 03R874" rev 1.10/1.00 addr 2
uhidev1: iclass 3/1, 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhub3 at uhub2 port 1 "Atmel UHB124 hub" rev 1.10/3.00 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
bootpath: /pci@1e,600000/pci@0,0/pci@a,0/pci@0,0/pci@8,0/scsi@1,0/disk@0,0
root on sd0a (ae6819de7d3b77fd.a) swap on sd0b dump on sd0b
BIOS signature incorrect 0 0
radeondrm0: 1024x768
wsdisplay0 at radeondrm0 mux 1
wskbd0: connecting to wsdisplay0
wsdisplay0: screen 0 added (std, sun emulation)
syncing disks... done
rebooting

console is /ebus@1f,464000/serial@2,80
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2016 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 6.0 (GENERIC.MP) #0: Tue Sep  6 17:42:53 CEST 2016
    [hidden email]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 4294967296 (4096MB)
avail mem = 4204666880 (4009MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Sun Fire V245
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz
cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
"memory-controller" at mainbus0 not configured
"memory-controller" at mainbus0 not configured
pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 13
pyro0: dvma map c0000000-ffffffff
pci0 at pyro0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xba
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xba
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00
pci3 at ppb2 bus 5
ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
ebus0 at pci3 dev 30 function 0 "Acer Labs M1575 ISA" rev 0x00
rtc0 at ebus0 addr 70-73: m5823
pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x784 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-845S, D100> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xba: msi
pci4 at ppb3 bus 6
ppb4 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xba: msi
pci5 at ppb4 bus 7
ppb5 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xba
pci6 at ppb5 bus 8
ppb6 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci7 at ppb6 bus 9
bge0 at pci7 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x795, address 00:14:4f:6f:f6:52
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci7 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x796, address 00:14:4f:6f:f6:53
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb7 at pci7 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
pci8 at ppb7 bus 10
ppb8 at pci1 dev 10 function 0 "PLX PEX 8532" rev 0xba
pci9 at ppb8 bus 11
ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci10 at ppb9 bus 12
bge2 at pci10 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x796, address 00:14:4f:6f:f6:54
brgphy2 at bge2 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge3 at pci10 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x797, address 00:14:4f:6f:f6:55
brgphy3 at bge3 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb10 at pci10 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
pci11 at ppb10 bus 13
mpi0 at pci11 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi
mpi0: SAS1064, firmware 1.8.4.0
scsibus2 at mpi0: 63 targets
sd0 at scsibus2 targ 0 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct fixed naa.600508e000000000a55e8bbf59315a08
sd0: 279890MB, 512 bytes/sector, 573214720 sectors
pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 4
pyro1: dvma map c0000000-ffffffff
pci12 at pyro1
ppb11 at pci12 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
pci13 at ppb11 bus 3
ppb12 at pci12 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
pci14 at ppb12 bus 4
radeondrm0 at pci14 dev 1 function 0 "ATI Radeon VE" rev 0x00
drm0 at radeondrm0
radeondrm0: ivec 0x7cb
ebus1 at mainbus0
"flashprom" at ebus1 addr 0-1fffff not configured
com0 at ebus1 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo
com0: console
com1 at ebus1 addr 40-47 ivec 0x7c9: ns16550a, 16 byte fifo
"rmc-comm" at ebus1 addr 0-7 ivec 0x7ca not configured
"gpio" at ebus1 addr c0-c0 not configured
led0 at ebus1 addr 0-80: rev 0x5a
power0 at ebus1 addr 40-c1 ivec 0x7c3
"i2c" at mainbus0 not configured
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent Dell 03R874" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd0 at ukbd0 mux 1
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent Dell 03R874" rev 1.10/1.00 addr 2
uhidev1: iclass 3/1, 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhub3 at uhub2 port 1 "Atmel UHB124 hub" rev 1.10/3.00 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
bootpath: /pci@1e,600000/pci@0,0/pci@a,0/pci@0,0/pci@8,0/scsi@1,0/disk@0,0
root on sd0a (ae6819de7d3b77fd.a) swap on sd0b dump on sd0b
BIOS signature incorrect 0 0
radeondrm0: 1024x768
wsdisplay0 at radeondrm0 mux 1
wskbd0: connecting to wsdisplay0
wsdisplay0: screen 0 added (std, sun emulation)
syncing disks... done
rebooting

console is /ebus@1f,464000/serial@2,80
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2016 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 6.0 (GENERIC.MP) #0: Tue Sep  6 17:42:53 CEST 2016
    [hidden email]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
real mem = 4294967296 (4096MB)
avail mem = 4204666880 (4009MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: Sun Fire V245
cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz
cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
cpu1 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz
cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
"memory-controller" at mainbus0 not configured
"memory-controller" at mainbus0 not configured
pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 13
pyro0: dvma map c0000000-ffffffff
pci0 at pyro0
ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xba
pci1 at ppb0 bus 3
ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xba
pci2 at ppb1 bus 4
ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00
pci3 at ppb2 bus 5
ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
ebus0 at pci3 dev 30 function 0 "Acer Labs M1575 ISA" rev 0x00
rtc0 at ebus0 addr 70-73: m5823
pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using ivec 0x784 for native-PCI interrupt
atapiscsi0 at pciide0 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-845S, D100> ATAPI 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xba: msi
pci4 at ppb3 bus 6
ppb4 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xba: msi
pci5 at ppb4 bus 7
ppb5 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xba
pci6 at ppb5 bus 8
ppb6 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci7 at ppb6 bus 9
bge0 at pci7 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x795, address 00:14:4f:6f:f6:52
brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge1 at pci7 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x796, address 00:14:4f:6f:f6:53
brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb7 at pci7 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
pci8 at ppb7 bus 10
ppb8 at pci1 dev 10 function 0 "PLX PEX 8532" rev 0xba
pci9 at ppb8 bus 11
ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
pci10 at ppb9 bus 12
bge2 at pci10 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x796, address 00:14:4f:6f:f6:54
brgphy2 at bge2 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
bge3 at pci10 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x797, address 00:14:4f:6f:f6:55
brgphy3 at bge3 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
ppb10 at pci10 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
pci11 at ppb10 bus 13
mpi0 at pci11 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi
mpi0: SAS1064, firmware 1.8.4.0
scsibus2 at mpi0: 63 targets
sd0 at scsibus2 targ 0 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct fixed naa.600508e000000000a55e8bbf59315a08
sd0: 279890MB, 512 bytes/sector, 573214720 sectors
pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 4
pyro1: dvma map c0000000-ffffffff
pci12 at pyro1
ppb11 at pci12 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
pci13 at ppb11 bus 3
ppb12 at pci12 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
pci14 at ppb12 bus 4
radeondrm0 at pci14 dev 1 function 0 "ATI Radeon VE" rev 0x00
drm0 at radeondrm0
radeondrm0: ivec 0x7cb
ebus1 at mainbus0
"flashprom" at ebus1 addr 0-1fffff not configured
com0 at ebus1 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo
com0: console
com1 at ebus1 addr 40-47 ivec 0x7c9: ns16550a, 16 byte fifo
"rmc-comm" at ebus1 addr 0-7 ivec 0x7ca not configured
"gpio" at ebus1 addr c0-c0 not configured
led0 at ebus1 addr 0-80: rev 0x5a
power0 at ebus1 addr 40-c1 ivec 0x7c3
"i2c" at mainbus0 not configured
uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent Dell 03R874" rev 1.10/1.00 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
wskbd0 at ukbd0 mux 1
uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent Dell 03R874" rev 1.10/1.00 addr 2
uhidev1: iclass 3/1, 3 report ids
ums0 at uhidev1 reportid 1: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
uhub3 at uhub2 port 1 "Atmel UHB124 hub" rev 1.10/3.00 addr 2
vscsi0 at root
scsibus3 at vscsi0: 256 targets
softraid0 at root
scsibus4 at softraid0: 256 targets
bootpath: /pci@1e,600000/pci@0,0/pci@a,0/pci@0,0/pci@8,0/scsi@1,0/disk@0,0
root on sd0a (ae6819de7d3b77fd.a) swap on sd0b dump on sd0b
BIOS signature incorrect 0 0
radeondrm0: 1024x768
wsdisplay0 at radeondrm0 mux 1
wskbd0: connecting to wsdisplay0
wsdisplay0: screen 0 added (std, sun emulation)
###

Reply | Threaded
Open this post in threaded view
|

Re: ifconfig -a shows only first ip address in 6.0 - bug or feature?

Theo de Raadt-2
Not new.

Use ifconfig -A to see all the addresses.

There is a history behind this, we'll consider changing it eventually.

> I've got a SPARC64 (Sun Fire V245) box with two-link LACP trunk setup and 4 IP addresses on that
> interface.
> `ifconfig -a' output shows only the first IP in the list, while running `ifconfig trunk0' shows
> the expected output of all 4 assigned IP addresses. Is this intended
> behavior?
>
> i.e.:
>
>         inet 111.222.333.32 netmask 0xffffff00 broadcast 111.222.333.255
>
> vs.
>
>         inet 111.222.333.32 netmask 0xffffff00 broadcast 111.222.333.255
>         inet 111.222.333.33 netmask 0xffffff00 broadcast 111.222.333.255
>         inet 111.222.333.34 netmask 0xffffff00 broadcast 111.222.333.255
>         inet 111.222.333.35 netmask 0xffffff00 broadcast 111.222.333.255
>
> I've substituted the first three bytes in IP addressess to 111,222 and 333
> and real domain to `domain' in dmesg.
>
> Output of ifconfig -a, ifconfig trunk0 and dmesg follows (running 6.0
> -stable with all errata for 6.0 applied  ) ; sections
> divided by ###
>
> Thank you and have a nice day,
> Jan
>
> ### ifconfig -a ###
> lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 32768
> index 6 priority 0 llprio 3
> groups: lo
> inet6 ::1 prefixlen 128
> inet6 fe80::1%lo0 prefixlen 64 scopeid 0x6
> inet 127.0.0.1 netmask 0xff000000
> bge0: flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu 1500
> lladdr 00:14:4f:6f:f6:52
> index 1 priority 0 llprio 3
> trunk: trunkdev trunk0
> media: Ethernet autoselect (1000baseT full-duplex)
> status: active
> bge1: flags=8b43<UP,BROADCAST,RUNNING,PROMISC,ALLMULTI,SIMPLEX,MULTICAST> mtu 1500
> lladdr 00:14:4f:6f:f6:52
> index 2 priority 0 llprio 3
> trunk: trunkdev trunk0
> media: Ethernet autoselect (1000baseT full-duplex)
> status: active
> bge2: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> lladdr 00:14:4f:6f:f6:54
> index 3 priority 0 llprio 3
> media: Ethernet autoselect (none)
> status: no carrier
> bge3: flags=8802<BROADCAST,SIMPLEX,MULTICAST> mtu 1500
> lladdr 00:14:4f:6f:f6:55
> index 4 priority 0 llprio 3
> media: Ethernet autoselect (none)
> status: no carrier
> enc0: flags=0<>
> index 5 priority 0 llprio 3
> groups: enc
> status: active
> trunk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> lladdr 00:14:4f:6f:f6:52
> index 7 priority 0 llprio 3
> trunk: trunkproto lacp
> trunk id: [(8000,00:14:4f:6f:f6:52,403C,0000,0000),
> (8000,5c:8a:38:c4:49:c4,0009,0000,0000)]
> trunkport bge1 active,collecting,distributing
> trunkport bge0 active,collecting,distributing
> groups: trunk egress
> media: Ethernet autoselect
> status: active
> inet 111.222.333.32 netmask 0xffffff00 broadcast 111.222.333.255
> pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33144
> index 8 priority 0 llprio 3
> groups: pflog
> ###
>
> ### ifconfig trunk0 ###
>
> trunk0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
> lladdr 00:14:4f:6f:f6:52
> index 7 priority 0 llprio 3
> trunk: trunkproto lacp
> trunk id: [(8000,00:14:4f:6f:f6:52,403C,0000,0000),
> (8000,5c:8a:38:c4:49:c4,0009,0000,0000)]
> trunkport bge1 active,collecting,distributing
> trunkport bge0 active,collecting,distributing
> groups: trunk egress
> media: Ethernet autoselect
> status: active
> inet 111.222.333.32 netmask 0xffffff00 broadcast 111.222.333.255
> inet 111.222.333.33 netmask 0xffffff00 broadcast 111.222.333.255
> inet 111.222.333.34 netmask 0xffffff00 broadcast 111.222.333.255
> inet 111.222.333.35 netmask 0xffffff00 broadcast 111.222.333.255
> ###
>
> ### dmesg ###
> console is /ebus@1f,464000/serial@2,80
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California.  All rights reserved.
> Copyright (c) 1995-2016 OpenBSD. All rights reserved.  http://www.OpenBSD.org
>
> OpenBSD 6.0 (GENERIC.MP) #1171: Tue Jul 26 17:03:19 MDT 2016
>     [hidden email]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
> real mem = 4294967296 (4096MB)
> avail mem = 4204707840 (4009MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root: Sun Fire V245
> cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz
> cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
> cpu1 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz
> cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
> "memory-controller" at mainbus0 not configured
> "memory-controller" at mainbus0 not configured
> pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 13
> pyro0: dvma map c0000000-ffffffff
> pci0 at pyro0
> ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xba
> pci1 at ppb0 bus 3
> ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xba
> pci2 at ppb1 bus 4
> ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00
> pci3 at ppb2 bus 5
> ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
> ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
> ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
> ebus0 at pci3 dev 30 function 0 "Acer Labs M1575 ISA" rev 0x00
> rtc0 at ebus0 addr 70-73: m5823
> pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using ivec 0x784 for native-PCI interrupt
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-845S, D100> ATAPI 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
> usb2 at ohci1: USB revision 1.0
> uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
> ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xba: msi
> pci4 at ppb3 bus 6
> ppb4 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xba: msi
> pci5 at ppb4 bus 7
> ppb5 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xba
> pci6 at ppb5 bus 8
> ppb6 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
> pci7 at ppb6 bus 9
> bge0 at pci7 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x795, address 00:14:4f:6f:f6:52
> brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
> bge1 at pci7 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x796, address 00:14:4f:6f:f6:53
> brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
> ppb7 at pci7 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
> pci8 at ppb7 bus 10
> ppb8 at pci1 dev 10 function 0 "PLX PEX 8532" rev 0xba
> pci9 at ppb8 bus 11
> ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
> pci10 at ppb9 bus 12
> bge2 at pci10 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x796, address 00:14:4f:6f:f6:54
> brgphy2 at bge2 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
> bge3 at pci10 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x797, address 00:14:4f:6f:f6:55
> brgphy3 at bge3 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
> ppb10 at pci10 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
> pci11 at ppb10 bus 13
> mpi0 at pci11 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi
> mpi0: SAS1064, firmware 1.8.4.0
> scsibus2 at mpi0: 63 targets
> sd0 at scsibus2 targ 0 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct fixed naa.600508e000000000a55e8bbf59315a08
> sd0: 279890MB, 512 bytes/sector, 573214720 sectors
> pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 4
> pyro1: dvma map c0000000-ffffffff
> pci12 at pyro1
> ppb11 at pci12 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
> pci13 at ppb11 bus 3
> ppb12 at pci12 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
> pci14 at ppb12 bus 4
> radeondrm0 at pci14 dev 1 function 0 "ATI Radeon VE" rev 0x00
> drm0 at radeondrm0
> radeondrm0: ivec 0x7cb
> ebus1 at mainbus0
> "flashprom" at ebus1 addr 0-1fffff not configured
> com0 at ebus1 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo
> com0: console
> com1 at ebus1 addr 40-47 ivec 0x7c9: ns16550a, 16 byte fifo
> "rmc-comm" at ebus1 addr 0-7 ivec 0x7ca not configured
> "gpio" at ebus1 addr c0-c0 not configured
> led0 at ebus1 addr 0-80: rev 0x5a
> power0 at ebus1 addr 40-c1 ivec 0x7c3
> "i2c" at mainbus0 not configured
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent Dell 03R874" rev 1.10/1.00 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
> wskbd0 at ukbd0 mux 1
> uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent Dell 03R874" rev 1.10/1.00 addr 2
> uhidev1: iclass 3/1, 3 report ids
> ums0 at uhidev1 reportid 1: 5 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
> uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
> uhub3 at uhub2 port 1 "Atmel UHB124 hub" rev 1.10/3.00 addr 2
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> bootpath: /pci@1e,600000/pci@0,0/pci@a,0/pci@0,0/pci@8,0/scsi@1,0/disk@0,0
> root on sd0a (ae6819de7d3b77fd.a) swap on sd0b dump on sd0b
> BIOS signature incorrect 0 0
> radeondrm0: 1024x768
> wsdisplay0 at radeondrm0 mux 1
> wskbd0: connecting to wsdisplay0
> wsdisplay0: screen 0 added (std, sun emulation)
> syncing disks... done
> rebooting
>
> console is /ebus@1f,464000/serial@2,80
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California.  All rights reserved.
> Copyright (c) 1995-2016 OpenBSD. All rights reserved.  http://www.OpenBSD.org
>
> OpenBSD 6.0 (GENERIC.MP) #0: Tue Sep  6 17:42:53 CEST 2016
>     [hidden email]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
> real mem = 4294967296 (4096MB)
> avail mem = 4204666880 (4009MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root: Sun Fire V245
> cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz
> cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
> cpu1 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz
> cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
> "memory-controller" at mainbus0 not configured
> "memory-controller" at mainbus0 not configured
> pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 13
> pyro0: dvma map c0000000-ffffffff
> pci0 at pyro0
> ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xba
> pci1 at ppb0 bus 3
> ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xba
> pci2 at ppb1 bus 4
> ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00
> pci3 at ppb2 bus 5
> ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
> ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
> ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
> ebus0 at pci3 dev 30 function 0 "Acer Labs M1575 ISA" rev 0x00
> rtc0 at ebus0 addr 70-73: m5823
> pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using ivec 0x784 for native-PCI interrupt
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-845S, D100> ATAPI 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
> usb2 at ohci1: USB revision 1.0
> uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
> ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xba: msi
> pci4 at ppb3 bus 6
> ppb4 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xba: msi
> pci5 at ppb4 bus 7
> ppb5 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xba
> pci6 at ppb5 bus 8
> ppb6 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
> pci7 at ppb6 bus 9
> bge0 at pci7 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x795, address 00:14:4f:6f:f6:52
> brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
> bge1 at pci7 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x796, address 00:14:4f:6f:f6:53
> brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
> ppb7 at pci7 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
> pci8 at ppb7 bus 10
> ppb8 at pci1 dev 10 function 0 "PLX PEX 8532" rev 0xba
> pci9 at ppb8 bus 11
> ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
> pci10 at ppb9 bus 12
> bge2 at pci10 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x796, address 00:14:4f:6f:f6:54
> brgphy2 at bge2 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
> bge3 at pci10 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x797, address 00:14:4f:6f:f6:55
> brgphy3 at bge3 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
> ppb10 at pci10 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
> pci11 at ppb10 bus 13
> mpi0 at pci11 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi
> mpi0: SAS1064, firmware 1.8.4.0
> scsibus2 at mpi0: 63 targets
> sd0 at scsibus2 targ 0 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct fixed naa.600508e000000000a55e8bbf59315a08
> sd0: 279890MB, 512 bytes/sector, 573214720 sectors
> pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 4
> pyro1: dvma map c0000000-ffffffff
> pci12 at pyro1
> ppb11 at pci12 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
> pci13 at ppb11 bus 3
> ppb12 at pci12 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
> pci14 at ppb12 bus 4
> radeondrm0 at pci14 dev 1 function 0 "ATI Radeon VE" rev 0x00
> drm0 at radeondrm0
> radeondrm0: ivec 0x7cb
> ebus1 at mainbus0
> "flashprom" at ebus1 addr 0-1fffff not configured
> com0 at ebus1 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo
> com0: console
> com1 at ebus1 addr 40-47 ivec 0x7c9: ns16550a, 16 byte fifo
> "rmc-comm" at ebus1 addr 0-7 ivec 0x7ca not configured
> "gpio" at ebus1 addr c0-c0 not configured
> led0 at ebus1 addr 0-80: rev 0x5a
> power0 at ebus1 addr 40-c1 ivec 0x7c3
> "i2c" at mainbus0 not configured
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent Dell 03R874" rev 1.10/1.00 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
> wskbd0 at ukbd0 mux 1
> uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent Dell 03R874" rev 1.10/1.00 addr 2
> uhidev1: iclass 3/1, 3 report ids
> ums0 at uhidev1 reportid 1: 5 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
> uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
> uhub3 at uhub2 port 1 "Atmel UHB124 hub" rev 1.10/3.00 addr 2
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> bootpath: /pci@1e,600000/pci@0,0/pci@a,0/pci@0,0/pci@8,0/scsi@1,0/disk@0,0
> root on sd0a (ae6819de7d3b77fd.a) swap on sd0b dump on sd0b
> BIOS signature incorrect 0 0
> radeondrm0: 1024x768
> wsdisplay0 at radeondrm0 mux 1
> wskbd0: connecting to wsdisplay0
> wsdisplay0: screen 0 added (std, sun emulation)
> syncing disks... done
> rebooting
>
> console is /ebus@1f,464000/serial@2,80
> Copyright (c) 1982, 1986, 1989, 1991, 1993
> The Regents of the University of California.  All rights reserved.
> Copyright (c) 1995-2016 OpenBSD. All rights reserved.  http://www.OpenBSD.org
>
> OpenBSD 6.0 (GENERIC.MP) #0: Tue Sep  6 17:42:53 CEST 2016
>     [hidden email]:/usr/src/sys/arch/sparc64/compile/GENERIC.MP
> real mem = 4294967296 (4096MB)
> avail mem = 4204666880 (4009MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root: Sun Fire V245
> cpu0 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz
> cpu0: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
> cpu1 at mainbus0: SUNW,UltraSPARC-IIIi (rev 3.4) @ 1504 MHz
> cpu1: physical 32K instruction (32 b/l), 64K data (32 b/l), 1024K external (64 b/l)
> "memory-controller" at mainbus0 not configured
> "memory-controller" at mainbus0 not configured
> pyro0 at mainbus0: "Fire", rev 3, ign 780, bus A 2 to 13
> pyro0: dvma map c0000000-ffffffff
> pci0 at pyro0
> ppb0 at pci0 dev 0 function 0 "PLX PEX 8532" rev 0xba
> pci1 at ppb0 bus 3
> ppb1 at pci1 dev 1 function 0 "PLX PEX 8532" rev 0xba
> pci2 at ppb1 bus 4
> ppb2 at pci2 dev 0 function 0 "Acer Labs M5249" rev 0x00
> pci3 at ppb2 bus 5
> ohci0 at pci3 dev 28 function 0 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
> ohci1 at pci3 dev 28 function 1 "Acer Labs M5237 USB" rev 0x03: ivec 0x780, version 1.0, legacy support
> ehci0 at pci3 dev 28 function 3 "Acer Labs M5239 USB2" rev 0x01: ivec 0x781
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Acer Labs EHCI root hub" rev 2.00/1.00 addr 1
> ebus0 at pci3 dev 30 function 0 "Acer Labs M1575 ISA" rev 0x00
> rtc0 at ebus0 addr 70-73: m5823
> pciide0 at pci3 dev 31 function 0 "Acer Labs M5229 UDMA IDE" rev 0xc8: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide0: using ivec 0x784 for native-PCI interrupt
> atapiscsi0 at pciide0 channel 0 drive 0
> scsibus1 at atapiscsi0: 2 targets
> cd0 at scsibus1 targ 0 lun 0: <MATSHITA, DVD-RAM UJ-845S, D100> ATAPI 5/cdrom removable
> cd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 disabled (no drives)
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
> usb2 at ohci1: USB revision 1.0
> uhub2 at usb2 "Acer Labs OHCI root hub" rev 1.00/1.00 addr 1
> ppb3 at pci1 dev 2 function 0 "PLX PEX 8532" rev 0xba: msi
> pci4 at ppb3 bus 6
> ppb4 at pci1 dev 8 function 0 "PLX PEX 8532" rev 0xba: msi
> pci5 at ppb4 bus 7
> ppb5 at pci1 dev 9 function 0 "PLX PEX 8532" rev 0xba
> pci6 at ppb5 bus 8
> ppb6 at pci6 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
> pci7 at ppb6 bus 9
> bge0 at pci7 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x795, address 00:14:4f:6f:f6:52
> brgphy0 at bge0 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
> bge1 at pci7 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x796, address 00:14:4f:6f:f6:53
> brgphy1 at bge1 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
> ppb7 at pci7 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
> pci8 at ppb7 bus 10
> ppb8 at pci1 dev 10 function 0 "PLX PEX 8532" rev 0xba
> pci9 at ppb8 bus 11
> ppb9 at pci9 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xb5
> pci10 at ppb9 bus 12
> bge2 at pci10 dev 4 function 0 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x796, address 00:14:4f:6f:f6:54
> brgphy2 at bge2 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
> bge3 at pci10 dev 4 function 1 "Broadcom BCM5714" rev 0xa3, BCM5715 A3 (0x9003): ivec 0x797, address 00:14:4f:6f:f6:55
> brgphy3 at bge3 phy 1: BCM5714 10/100/1000baseT/SX PHY, rev. 0
> ppb10 at pci10 dev 8 function 0 "ServerWorks HT-1000 PCIX" rev 0xb4
> pci11 at ppb10 bus 13
> mpi0 at pci11 dev 1 function 0 "Symbios Logic SAS1064" rev 0x02: msi
> mpi0: SAS1064, firmware 1.8.4.0
> scsibus2 at mpi0: 63 targets
> sd0 at scsibus2 targ 0 lun 0: <LSILOGIC, Logical Volume, 3000> SCSI2 0/direct fixed naa.600508e000000000a55e8bbf59315a08
> sd0: 279890MB, 512 bytes/sector, 573214720 sectors
> pyro1 at mainbus0: "Fire", rev 3, ign 7c0, bus B 2 to 4
> pyro1: dvma map c0000000-ffffffff
> pci12 at pyro1
> ppb11 at pci12 dev 0 function 0 "Intel 41210 PCIE-PCIX" rev 0x09
> pci13 at ppb11 bus 3
> ppb12 at pci12 dev 0 function 2 "Intel 41210 PCIE-PCIX" rev 0x09
> pci14 at ppb12 bus 4
> radeondrm0 at pci14 dev 1 function 0 "ATI Radeon VE" rev 0x00
> drm0 at radeondrm0
> radeondrm0: ivec 0x7cb
> ebus1 at mainbus0
> "flashprom" at ebus1 addr 0-1fffff not configured
> com0 at ebus1 addr 80-87 ivec 0x7c8: ns16550a, 16 byte fifo
> com0: console
> com1 at ebus1 addr 40-47 ivec 0x7c9: ns16550a, 16 byte fifo
> "rmc-comm" at ebus1 addr 0-7 ivec 0x7ca not configured
> "gpio" at ebus1 addr c0-c0 not configured
> led0 at ebus1 addr 0-80: rev 0x5a
> power0 at ebus1 addr 40-c1 ivec 0x7c3
> "i2c" at mainbus0 not configured
> uhidev0 at uhub1 port 1 configuration 1 interface 0 "Avocent Dell 03R874" rev 1.10/1.00 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes, country code 33
> wskbd0 at ukbd0 mux 1
> uhidev1 at uhub1 port 1 configuration 1 interface 1 "Avocent Dell 03R874" rev 1.10/1.00 addr 2
> uhidev1: iclass 3/1, 3 report ids
> ums0 at uhidev1 reportid 1: 5 buttons, Z dir
> wsmouse0 at ums0 mux 0
> uhid0 at uhidev1 reportid 2: input=2, output=0, feature=0
> uhid1 at uhidev1 reportid 3: input=1, output=0, feature=0
> uhub3 at uhub2 port 1 "Atmel UHB124 hub" rev 1.10/3.00 addr 2
> vscsi0 at root
> scsibus3 at vscsi0: 256 targets
> softraid0 at root
> scsibus4 at softraid0: 256 targets
> bootpath: /pci@1e,600000/pci@0,0/pci@a,0/pci@0,0/pci@8,0/scsi@1,0/disk@0,0
> root on sd0a (ae6819de7d3b77fd.a) swap on sd0b dump on sd0b
> BIOS signature incorrect 0 0
> radeondrm0: 1024x768
> wsdisplay0 at radeondrm0 mux 1
> wskbd0: connecting to wsdisplay0
> wsdisplay0: screen 0 added (std, sun emulation)
> ###