hardware: IBM x3455 test reports

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

hardware: IBM x3455 test reports

Srebrenko Sehic-2
IBM changed their entire (almost) lineup of X-series servers. It seems
that most of the SCSI/SAS variants now have ServeRAID/Adaptec chips,
which makes them unusable on OpenBSD. X3455, oddly, has an LSI1064 SAS
and should work fine.

Anyways, I got my hands on one with SATA. And it just works. Even IPMI
works (previous IBM boxes had quirks).

As always, more info on http://www.armorlogic.com/oscl

OpenBSD 4.0 (GENERIC.MP) #967: Sat Sep 16 20:38:15 MDT 2006
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3488210944 (3406456K)
avail mem = 2990272512 (2920188K)
using 22937 buffers containing 349028352 bytes (340848K) of memory
mainbus0 (root)
bios0 at mainbus0: SMBIOS rev. 2.4 @ 0xcff6c000 (51 entries)
bios0: IBM IBM System x3455-[798452Y]-
ipmi0 at mainbus0: version 2.0 interface KCS iobase 0xca8/8 spacing 4
mainbus0: Intel MP Specification (Version 1.4) (BRCM     EXPLOSION   )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual-Core AMD Opteron(tm) Processor 2218, 2593.84 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 199MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual-Core AMD Opteron(tm) Processor 2218, 2593.50 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Dual-Core AMD Opteron(tm) Processor 2218, 2593.50 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Dual-Core AMD Opteron(tm) Processor 2218, 2593.50 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB
64b/line 16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI
mpbios: bus 1 is type PCI
mpbios: bus 2 is type PCI
mpbios: bus 3 is type ISA
ioapic0 at mainbus0 apid 4 pa 0xfec00000, version 11, 16 pins
ioapic1 at mainbus0 apid 5 pa 0xfec01000, version 11, 16 pins
ioapic2 at mainbus0 apid 6 pa 0xfec02000, version 11, 16 pins
pci0 at mainbus0 bus 0: configuration mode 1
ppb0 at pci0 dev 1 function 0 "ServerWorks HT-1000 PCI" rev 0x00
pci1 at ppb0 bus 1
ppb1 at pci1 dev 13 function 0 "ServerWorks HT-1000 PCIX" rev 0xc0
pci2 at ppb1 bus 2
bge0 at pci2 dev 1 function 0 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 5 int 2 (irq 11), address 00:14:5e:55:13:7f
brgphy0 at bge0 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
bge1 at pci2 dev 1 function 1 "Broadcom BCM5704C" rev 0x10, BCM5704 B0
(0x2100): apic 5 int 1 (irq 5), address 00:14:5e:55:13:80
brgphy1 at bge1 phy 1: BCM5704 10/100/1000baseT PHY, rev. 0
pciide0 at pci1 dev 14 function 0 "ServerWorks HT-1000 SATA" rev 0x00: DMA
pciide0: using apic 4 int 7 (irq 7) for native-PCI interrupt
pciide0: port 0: device present, speed: 1.5Gb/s
wd0 at pciide0 channel 0 drive 0: <WDC WD800JD-23LSA0>
wd0: 16-sector PIO, LBA48, 76324MB, 156312576 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
pciide0: port 1: PHY offline
pciide0: port 2: PHY offline
pciide0: port 3: PHY offline
piixpm0 at pci0 dev 2 function 0 "ServerWorks HT-1000" rev 0x00: polling
iic0 at piixpm0: disabled to avoid ipmi0 interactions
pciide1 at pci0 dev 2 function 1 "ServerWorks HT-1000 IDE" rev 0x00: DMA
pcib0 at pci0 dev 2 function 2 "ServerWorks HT-1000 LPC" rev 0x00
ohci0 at pci0 dev 3 function 0 "ServerWorks HT-1000 USB" rev 0x01:
apic 4 int 10 (irq 10), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
ohci1 at pci0 dev 3 function 1 "ServerWorks HT-1000 USB" rev 0x01:
apic 4 int 10 (irq 10), version 1.0, legacy support
usb1 at ohci1: USB revision 1.0
uhub1 at usb1
uhub1: ServerWorks OHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 3 function 2 "ServerWorks HT-1000 USB" rev 0x01:
apic 4 int 10 (irq 10)
usb2 at ehci0: USB revision 2.0
uhub2 at usb2
uhub2: ServerWorks EHCI root hub, rev 2.00/1.00, addr 1
uhub2: 4 ports with 4 removable, self powered
vga1 at pci0 dev 5 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb2 at pci0 dev 6 function 0 vendor "ServerWorks", unknown product
0x0140 rev 0xa2
pci3 at ppb2 bus 3
ppb3 at pci0 dev 7 function 0 vendor "ServerWorks", unknown product
0x0142 rev 0xa2
pci4 at ppb3 bus 4
ppb4 at pci0 dev 8 function 0 vendor "ServerWorks", unknown product
0x0144 rev 0xa2
pci5 at ppb4 bus 5
ppb5 at pci0 dev 9 function 0 vendor "ServerWorks", unknown product
0x0142 rev 0xa2
pci6 at ppb5 bus 6
ppb6 at pci0 dev 10 function 0 vendor "ServerWorks", unknown product
0x0144 rev 0xa2
pci7 at ppb6 bus 7
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
uhub3 at uhub2 port 3
uhub3: Standard Microsystems product 0x2504, rev 2.00/0.01, addr 2
uhub3: 4 ports with 4 removable, self powered, multiple transaction translators
uhidev0 at uhub3 port 3 configuration 1 interface 0
uhidev0: DELL DELL USB Keyboard, rev 1.10/1.04, addr 3, iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

Reply | Threaded
Open this post in threaded view
|

Re: hardware: IBM x3455 test reports

Srebrenko Sehic-2
> IBM changed their entire (almost) lineup of X-series servers. It seems
> that most of the SCSI/SAS variants now have ServeRAID/Adaptec chips,
> which makes them unusable on OpenBSD. X3455, oddly, has an LSI1064 SAS
> and should work fine.

Just to correct myself. x3200 and x3250 (both available with either
Penitum D and XEON) also come with LSI1064e SAS/SATA controllers.

The rest of boxes have either Adaptec AIC-9580W or AIC-9410.

All the gory details at
http://www-03.ibm.com/servers/eserver/education/cust/xseries/xref/usxref.pdf