Quantcast

error installation pcDuino v1 linksprite openbsd6.0

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

error installation pcDuino v1 linksprite openbsd6.0

Alexandr_St_
I've problem with installation OpenBSD 6.0 on an pcDuino v1 (allwiner A10) - please help.
Installation process end after 2 rows after start, result on foto (sorry, not very well foto).
"panic" report on foto (bsd9a.jpg will write here):
2
libfdt fdt_check_header(): FDT_ERR_BADMAGIC

1
>> OpenBSD/armv7 BOOTARM 0.1
boot>
cannot open sd0a:/etc/random.seed: No such file or directory
booting sd0a:/bsd: 2094344+7928824+428472 [64+297600+142893]=0xa64014

and end :(


I prepared sd under linux:
$ sudo dd if=/home/ubuntu/Desktop/pcDuino/OpenBSD/miniroot-cubie-60.fs of=/dev/mmcblk0
$sudo dd if=/home/ubuntu/Desktop/pcDuino/7.2016_U-boot/Linksprite_pcDuino/u-boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8


Image miniroot-cubie-60.fs download yarstadey.
  Please help.

Oleksandr.
 

bsd9a.JPG (343K) Download Attachment
bsd19.jpg (669K) Download Attachment
bsd3.jpg (608K) Download Attachment
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: error installation pcDuino v1 linksprite openbsd6.0

Alexandr_St_

    Juan, thank you! I downloaded files from link. I tried use the u-boot image for my board with dd

$ sudo dd if=/media/Transcend_680MB/share/u-boot/Linksprite_pcDuino/u-boot.img of=/dev/mmcblk0 bs=1024 seek=8
then replace dtb file on sun4i-a10-pcduino.dtb 
$ sudo cp sun4i-a10-pcduino.dtb /mnt
And after reboot board not load from sd card.  Then I installed u-boot-sunxi-with-spl.bin. Board load but problem stay -   installation process end after 2 rows after start, result on foto (with_sun4i_dtb.jpg)  Problem 2 - libfdt fdt_check_header(): FDT_ERR_BADMAGIC       -  absand :)
Please help.

30 вересня 2016, 04:30:17, від "Juan Francisco Cantero Hurtado" < [hidden email] >:

On Thu, Sep 29, 2016 at 04:53:21PM +0300, [hidden email]  wrote:

> I've problem with installation OpenBSD 6.0 on an pcDuino v1 (allwiner A10) - please help.
> Installation process end after 2 rows after start, result on foto (sorry, not very well foto).
> "panic" report on foto (bsd9a.jpg will write here):
> 2
> libfdt fdt_check_header(): FDT_ERR_BADMAGIC
>
> 1
> >> OpenBSD/armv7 BOOTARM 0.1
> boot>
> cannot open sd0a:/etc/random.seed: No such file or directory
> booting sd0a:/bsd: 2094344+7928824+428472 [64+297600+142893]=0xa64014
>
> and end :(
>
>
> I prepared sd under linux:
> $ sudo dd if=/home/ubuntu/Desktop/pcDuino/OpenBSD/miniroot-cubie-60.fs of=/dev/mmcblk0
> $sudo dd if=/home/ubuntu/Desktop/pcDuino/7.2016_U-boot/Linksprite_pcDuino/u-boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8
>
>
> Image miniroot-cubie-60.fs download yarstadey.
>   Please help.
Download and untar this file
 http://ftp.fr.openbsd.org/pub/OpenBSD/snapshots/packages/amd64/u-boot-2016.09.tgz 
. Use the u-boot image for your board with dd.

Mount the FAT partition on Linux and delete the dtb file. Then untar
this file
 http://ftp.fr.openbsd.org/pub/OpenBSD/snapshots/packages/amd64/dtb-4.7.tgz 
and copy the correct dtb to the FAT partition.



--
Juan Francisco Cantero Hurtado http://juanfra.info 
 
 

with_sun4i_dtb.jpg (505K) Download Attachment
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: error installation pcDuino v1 linksprite openbsd6.0

Juan Francisco Cantero Hurtado
We don't have support for the HDMI port. You need a serial cable
https://linux-sunxi.org/UART .

On viernes, 30 de septiembre de 2016 22:39:49 (CEST)
[hidden email] wrote:

>     Juan, thank you! I downloaded files from link. I tried use the
> u-boot image for my board with dd
>
> $ sudo dd
> if=/media/Transcend_680MB/share/u-boot/Linksprite_pcDuino/u-boot.img
> of=/dev/mmcblk0 bs=1024 seek=8 then replace dtb file on
> sun4i-a10-pcduino.dtb
> $ sudo cp sun4i-a10-pcduino.dtb /mnt
> And after reboot board not load from sd card.  Then I installed
> u-boot-sunxi-with-spl.bin. Board load but problem stay -  
> installation process end after 2 rows after start, result on foto
> (with_sun4i_dtb.jpg)  Problem 2 - libfdt fdt_check_header():
> FDT_ERR_BADMAGIC       -  absand :) Please help.
>
> 30 вересня 2016, 04:30:17, від "Juan Francisco Cantero Hurtado" <
> [hidden email] >:
> On Thu, Sep 29, 2016 at 04:53:21PM +0300, [hidden email]  wrote:
> > I've problem with installation OpenBSD 6.0 on an pcDuino v1
> > (allwiner A10) - please help. Installation process end after 2 rows
> > after start, result on foto (sorry, not very well foto). "panic"
> > report on foto (bsd9a.jpg will write here):
> > 2
> > libfdt fdt_check_header(): FDT_ERR_BADMAGIC
> >
> > 1
> >
> > >> OpenBSD/armv7 BOOTARM 0.1
> >
> > boot>
> > cannot open sd0a:/etc/random.seed: No such file or directory
> > booting sd0a:/bsd: 2094344+7928824+428472
> > [64+297600+142893]=0xa64014
> >
> > and end :(
> >
> >
> > I prepared sd under linux:
> > $ sudo dd
> > if=/home/ubuntu/Desktop/pcDuino/OpenBSD/miniroot-cubie-60.fs
> > of=/dev/mmcblk0 $sudo dd
> > if=/home/ubuntu/Desktop/pcDuino/7.2016_U-boot/Linksprite_pcDuino/u-
> > boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8
> >
> >
> > Image miniroot-cubie-60.fs download yarstadey.
> >
> >   Please help.
>
> Download and untar this file
>  http://ftp.fr.openbsd.org/pub/OpenBSD/snapshots/packages/amd64/u-boot
> -2016.09.tgz . Use the u-boot image for your board with dd.
>
> Mount the FAT partition on Linux and delete the dtb file. Then untar
> this file
>  http://ftp.fr.openbsd.org/pub/OpenBSD/snapshots/packages/amd64/dtb-4.
> 7.tgz and copy the correct dtb to the FAT partition.


--
Juan Francisco Cantero Hurtado http://juanfra.info

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: error installation pcDuino v1 linksprite openbsd6.0

Alexandr_St_

    Juan, thank you!

1 жовтня 2016, 22:56:06, від "Juan Francisco Cantero Hurtado" < [hidden email] >:

We don't have support for the HDMI port. You need a serial cable
 https://linux-sunxi.org/UART  .

On viernes, 30 de septiembre de 2016 22:39:49 (CEST)
 [hidden email]  wrote:

>     Juan, thank you! I downloaded files from link. I tried use the
> u-boot image for my board with dd
>
> $ sudo dd
> if=/media/Transcend_680MB/share/u-boot/Linksprite_pcDuino/u-boot.img
> of=/dev/mmcblk0 bs=1024 seek=8 then replace dtb file on
> sun4i-a10-pcduino.dtb
> $ sudo cp sun4i-a10-pcduino.dtb /mnt
> And after reboot board not load from sd card.  Then I installed
> u-boot-sunxi-with-spl.bin. Board load but problem stay -  
> installation process end after 2 rows after start, result on foto
> (with_sun4i_dtb.jpg)  Problem 2 - libfdt fdt_check_header():
> FDT_ERR_BADMAGIC       -  absand :) Please help.
>
> 30 вересня 2016, 04:30:17, від "Juan Francisco Cantero Hurtado" <
> [hidden email]  >:
> On Thu, Sep 29, 2016 at 04:53:21PM +0300, [hidden email]   wrote:
> > I've problem with installation OpenBSD 6.0 on an pcDuino v1
> > (allwiner A10) - please help. Installation process end after 2 rows
> > after start, result on foto (sorry, not very well foto). "panic"
> > report on foto (bsd9a.jpg will write here):
> > 2
> > libfdt fdt_check_header(): FDT_ERR_BADMAGIC
> >
> > 1
> >
> > >> OpenBSD/armv7 BOOTARM 0.1
> >
> > boot>
> > cannot open sd0a:/etc/random.seed: No such file or directory
> > booting sd0a:/bsd: 2094344+7928824+428472
> > [64+297600+142893]=0xa64014
> >
> > and end :(
> >
> >
> > I prepared sd under linux:
> > $ sudo dd
> > if=/home/ubuntu/Desktop/pcDuino/OpenBSD/miniroot-cubie-60.fs
> > of=/dev/mmcblk0 $sudo dd
> > if=/home/ubuntu/Desktop/pcDuino/7.2016_U-boot/Linksprite_pcDuino/u-
> > boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8
> >
> >
> > Image miniroot-cubie-60.fs download yarstadey.
> >
> >   Please help.
>
> Download and untar this file
>  http://ftp.fr.openbsd.org/pub/OpenBSD/snapshots/packages/amd64/u-boot 
> -2016.09.tgz . Use the u-boot image for your board with dd.
>
> Mount the FAT partition on Linux and delete the dtb file. Then untar
> this file
>  http://ftp.fr.openbsd.org/pub/OpenBSD/snapshots/packages/amd64/dtb-4 .
> 7.tgz and copy the correct dtb to the FAT partition.


--
Juan Francisco Cantero Hurtado http://juanfra.info 

 
 
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: error installation pcDuino v1 linksprite openbsd6.0

Alexandr_St_
In reply to this post by Juan Francisco Cantero Hurtado

    After installation of openbsd,  hdmi will work?


1 жовтня 2016, 22:56:06, від "Juan Francisco Cantero Hurtado" < [hidden email] >:

We don't have support for the HDMI port. You need a serial cable
 https://linux-sunxi.org/UART  .

On viernes, 30 de septiembre de 2016 22:39:49 (CEST)
 [hidden email]  wrote:

>     Juan, thank you! I downloaded files from link. I tried use the
> u-boot image for my board with dd
>
> $ sudo dd
> if=/media/Transcend_680MB/share/u-boot/Linksprite_pcDuino/u-boot.img
> of=/dev/mmcblk0 bs=1024 seek=8 then replace dtb file on
> sun4i-a10-pcduino.dtb
> $ sudo cp sun4i-a10-pcduino.dtb /mnt
> And after reboot board not load from sd card.  Then I installed
> u-boot-sunxi-with-spl.bin. Board load but problem stay -  
> installation process end after 2 rows after start, result on foto
> (with_sun4i_dtb.jpg)  Problem 2 - libfdt fdt_check_header():
> FDT_ERR_BADMAGIC       -  absand :) Please help.
>
> 30 вересня 2016, 04:30:17, від "Juan Francisco Cantero Hurtado" <
> [hidden email]  >:
> On Thu, Sep 29, 2016 at 04:53:21PM +0300, [hidden email]   wrote:
> > I've problem with installation OpenBSD 6.0 on an pcDuino v1
> > (allwiner A10) - please help. Installation process end after 2 rows
> > after start, result on foto (sorry, not very well foto). "panic"
> > report on foto (bsd9a.jpg will write here):
> > 2
> > libfdt fdt_check_header(): FDT_ERR_BADMAGIC
> >
> > 1
> >
> > >> OpenBSD/armv7 BOOTARM 0.1
> >
> > boot>
> > cannot open sd0a:/etc/random.seed: No such file or directory
> > booting sd0a:/bsd: 2094344+7928824+428472
> > [64+297600+142893]=0xa64014
> >
> > and end :(
> >
> >
> > I prepared sd under linux:
> > $ sudo dd
> > if=/home/ubuntu/Desktop/pcDuino/OpenBSD/miniroot-cubie-60.fs
> > of=/dev/mmcblk0 $sudo dd
> > if=/home/ubuntu/Desktop/pcDuino/7.2016_U-boot/Linksprite_pcDuino/u-
> > boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8
> >
> >
> > Image miniroot-cubie-60.fs download yarstadey.
> >
> >   Please help.
>
> Download and untar this file
>  http://ftp.fr.openbsd.org/pub/OpenBSD/snapshots/packages/amd64/u-boot 
> -2016.09.tgz . Use the u-boot image for your board with dd.
>
> Mount the FAT partition on Linux and delete the dtb file. Then untar
> this file
>  http://ftp.fr.openbsd.org/pub/OpenBSD/snapshots/packages/amd64/dtb-4 .
> 7.tgz and copy the correct dtb to the FAT partition.


--
Juan Francisco Cantero Hurtado http://juanfra.info 

 
 
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: error installation pcDuino v1 linksprite openbsd6.0

Juan Francisco Cantero Hurtado
On miércoles, 5 de octubre de 2016 2:03:04 (CEST) [hidden email]
wrote:
>     After installation of openbsd,  hdmi will work?

No, you will need the serial cable.

>
>
> 1 жовтня 2016, 22:56:06, від "Juan Francisco Cantero Hurtado" <
> [hidden email] >:
>
> We don't have support for the HDMI port. You need a serial cable
>  https://linux-sunxi.org/UART  .
>
> On viernes, 30 de septiembre de 2016 22:39:49 (CEST)
>
>  [hidden email]  wrote:
> >     Juan, thank you! I downloaded files from link. I tried use the
> >
> > u-boot image for my board with dd
> >
> > $ sudo dd
> > if=/media/Transcend_680MB/share/u-boot/Linksprite_pcDuino/u-boot.img
> > of=/dev/mmcblk0 bs=1024 seek=8 then replace dtb file on
> > sun4i-a10-pcduino.dtb
> > $ sudo cp sun4i-a10-pcduino.dtb /mnt
> > And after reboot board not load from sd card.  Then I installed
> > u-boot-sunxi-with-spl.bin. Board load but problem stay -
> > installation process end after 2 rows after start, result on foto
> > (with_sun4i_dtb.jpg)  Problem 2 - libfdt fdt_check_header():
> > FDT_ERR_BADMAGIC       -  absand :) Please help.
> >
> > 30 вересня 2016, 04:30:17, від "Juan Francisco Cantero Hurtado" <
> > [hidden email]  >:
> >
> > On Thu, Sep 29, 2016 at 04:53:21PM +0300, [hidden email]  
wrote:

> > > I've problem with installation OpenBSD 6.0 on an pcDuino v1
> > > (allwiner A10) - please help. Installation process end after 2
> > > rows
> > > after start, result on foto (sorry, not very well foto). "panic"
> > > report on foto (bsd9a.jpg will write here):
> > > 2
> > > libfdt fdt_check_header(): FDT_ERR_BADMAGIC
> > >
> > > 1
> > >
> > > >> OpenBSD/armv7 BOOTARM 0.1
> > >
> > > boot>
> > > cannot open sd0a:/etc/random.seed: No such file or directory
> > > booting sd0a:/bsd: 2094344+7928824+428472
> > > [64+297600+142893]=0xa64014
> > >
> > > and end :(
> > >
> > >
> > > I prepared sd under linux:
> > > $ sudo dd
> > > if=/home/ubuntu/Desktop/pcDuino/OpenBSD/miniroot-cubie-60.fs
> > > of=/dev/mmcblk0 $sudo dd
> > > if=/home/ubuntu/Desktop/pcDuino/7.2016_U-boot/Linksprite_pcDuino/u
> > > -
> > > boot-sunxi-with-spl.bin of=/dev/mmcblk0 bs=1024 seek=8
> > >
> > >
> > > Image miniroot-cubie-60.fs download yarstadey.
> > >
> > >   Please help.
> >
> > Download and untar this file
> >
> >  http://ftp.fr.openbsd.org/pub/OpenBSD/snapshots/packages/amd64/u-bo
> >  ot
> >
> > -2016.09.tgz . Use the u-boot image for your board with dd.
> >
> > Mount the FAT partition on Linux and delete the dtb file. Then untar
> > this file
> >
> >  http://ftp.fr.openbsd.org/pub/OpenBSD/snapshots/packages/amd64/dtb-> >  4 .>
> > 7.tgz and copy the correct dtb to the FAT partition.


--
Juan Francisco Cantero Hurtado http://juanfra.info

Loading...