eGalax touchscreen for Exopc

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

eGalax touchscreen for Exopc

Brett Mahar-2
Hi,

I've just installed amd64 snapshot on an Exopc and am trying to see if it can use the touchscreen. From the dmesg below, its an uhts(4) "eGalax Inc. USB TouchController" rev 1.10/10.06.

I tried to use xtsscale -v -d 7 and -d 8 to calibrate the pointer (7 is wsmouse0, 8 is wsmouse1). In both cases, the "touch screen calibration" screen comes up, but it does not detect me pressing the screen. Is there much chance of getting this touchscreen to work?

dmesg, usbdevs, and Xorg.0.log follow.

Thanks,
Brett.


OpenBSD 5.2-current (GENERIC.MP) #96: Sat Nov  3 14:43:34 MDT 2012
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 2134208512 (2035MB)
avail mem = 2054971392 (1959MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9150 (52 entries)
bios0: vendor American Megatrends Inc. version "Lucid-CE-133" date 11/22/2010
bios0: EXOPC EXOPG06411
acpi0 at bios0: rev 3
acpi0: sleep states S0 S1 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SLIC HPET ECDT
acpi0: wakeup devices P0P3(S4) USB0(S3) USB1(S3) USB2(S3) EUB1(S3) USB4(S3) EUB2(S3) P0P9(S4) P0PA(S4) P0PB(S4) P0PC(S4) P0PD(S4) P0PE(S4) AC0_(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz, 1679.47 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF
cpu0: 512KB 64b/line 8-way L2 cache
cpu0: apic clock running at 167MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Atom(TM) CPU N450 @ 1.66GHz, 1679.23 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF
cpu1: 512KB 64b/line 8-way L2 cache
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
acpihpet0 at acpi0: 14318179 Hz
acpiec0 at acpi0
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (P0P3)
acpiprt2 at acpi0: bus 1 (P0P9)
acpiprt3 at acpi0: bus -1 (P0PA)
acpiprt4 at acpi0: bus 2 (P0PB)
acpiprt5 at acpi0: bus -1 (P0PC)
acpiprt6 at acpi0: bus -1 (P0PD)
acpiprt7 at acpi0: bus -1 (P0PE)
acpiec at acpi0 not configured
acpicpu0 at acpi0:, C3, C2, C1, PSS
acpicpu1 at acpi0:, C3, C2, C1, PSS
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0
acpibtn0 at acpi0: PWRB
acpiasus at acpi0 not configured
cpu0: Enhanced SpeedStep 1679 MHz: speeds: 1667, 1500, 1334, 1167, 1000 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00
vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 4 int 16
drm0 at inteldrm0
"Intel Pineview Video" rev 0x00 at pci0 dev 2 function 1 not configured
uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x04: apic 4 int 16
uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x04: apic 4 int 21
ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x04: apic 4 int 18
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x04: msi
azalia0: codecs: Realtek ALC269
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x04: msi
pci1 at ppb0 bus 1
athn0 at pci1 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 4 int 16
athn0: AR9285 rev 2 (1T1R), ROM rev 14, address 48:5d:60:22:03:07
ppb1 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x04: msi
pci2 at ppb1 bus 2
vendor "Broadcom", unknown product 0x1615 (class multimedia subclass miscellaneous, rev 0x00) at pci2 dev 0 function 0 not configured
uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x04: apic 4 int 23
uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x04: apic 4 int 19
uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x04: apic 4 int 18
ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x04: apic 4 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf4
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x04
pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x04: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
pciide0: channel 0 disabled (no drives)
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x04: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide1: using apic 4 int 18 for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <SanDisk SSD P4 64GB>
wd0: 1-sector PIO, LBA48, 61057MB, 125045424 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x04: apic 4 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
mtrr: Pentium Pro MTRR support
uvideo0 at uhub1 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. USB 2.0 Camera" rev 2.00/55.51 addr 2
video0 at uvideo0
uhidev0 at uhub2 port 1 configuration 1 interface 0 "eGalax Inc. USB TouchController" rev 1.10/10.06 addr 2
uhidev0: iclass 3/1, 5 report ids
uhid0 at uhidev0 reportid 1: input=5, output=0, feature=0
uhts0 at uhidev0 reportid 2
wsmouse0 at uhts0 mux 0
uhid1 at uhidev0 reportid 3: input=63, output=63, feature=0
uhts1 at uhidev0 reportid 4
wsmouse1 at uhts1 mux 0
uhid2 at uhidev0 reportid 5: input=0, output=0, feature=2
uhidev1 at uhub4 port 1 configuration 1 interface 0 "Holtek product 0x1203" rev 2.00/2.80 addr 2
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev2 at uhub4 port 1 configuration 1 interface 1 "Holtek product 0x1203" rev 2.00/2.80 addr 2
uhidev2: iclass 3/0, 2 report ids
uhid3 at uhidev2 reportid 1: input=1, output=0, feature=0
uhid4 at uhidev2 reportid 2: input=3, output=0, feature=0
uhidev3 at uhub4 port 2 configuration 1 interface 0 "Genesys Logic Quick Quick Cat !" rev 1.10/1.00 addr 3
uhidev3: iclass 3/1
ums0 at uhidev3: 3 buttons
wsmouse2 at ums0 mux 0
ugen0 at uhub5 port 1 "AsureWave product 0x3304" rev 1.10/0.01 addr 2
vscsi0 at root
scsibus0 at vscsi0: 256 targets
softraid0 at root
scsibus1 at softraid0: 256 targets
root on wd0a (fc9db7d381061194.a) swap on wd0b dump on wd0b
wsmouse2 detached
ums0 detached
uhidev3 detached

======

Controller /dev/usb0:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
Controller /dev/usb1:
addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 powered
 port 2 powered
 port 3 powered
 port 4 powered
 port 5 powered
 port 6 addr 2: high speed, power 500 mA, config 1, USB 2.0 Camera(0xb213), Chicony Electronics Co., Ltd.(0x04f2), rev 55.51, iSerialNumber SN0001
Controller /dev/usb2:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 addr 2: full speed, power 100 mA, config 1, USB TouchController(0x72a1), eGalax Inc.(0x0eef), rev 10.06
 port 2 powered
Controller /dev/usb3:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 powered
 port 2 powered
Controller /dev/usb4:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 addr 2: low speed, power 100 mA, config 1, product 0x1203(0x1203), Holtek(0x04d9), rev 2.80
 port 2 powered
Controller /dev/usb5:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 addr 2: full speed, self powered, config 1, product 0x3304(0x3304), AsureWave(0x13d3), rev 0.01
 port 2 powered
Controller /dev/usb6:
addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
 port 1 powered
 port 2 powered

======

[    17.253] (--) checkDevMem: using aperture driver /dev/xf86
[    17.275] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32)
[    17.295]
X.Org X Server 1.12.3
Release Date: 2012-07-09
[    17.295] X Protocol Version 11, Revision 0
[    17.295] Build Operating System: OpenBSD 5.2 amd64
[    17.295] Current Operating System: OpenBSD foo.my.domain 5.2 GENERIC.MP#96 amd64
[    17.296] Build Date: 02 November 2012  12:49:18AM
[    17.296]  
[    17.296] Current version of pixman: 0.26.2
[    17.296] Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
[    17.296] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[    17.296] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov  5 20:25:36 2012
[    17.299] (==) Using config file: "/etc/X11/xorg.conf"
[    17.300] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
[    17.303] (==) No Layout section.  Using the first Screen section.
[    17.303] (==) No screen section available. Using defaults.
[    17.303] (**) |-->Screen "Default Screen Section" (0)
[    17.304] (**) |   |-->Monitor "<default monitor>"
[    17.305] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
[    17.305] (==) Disabling SIGIO handlers for input devices
[    17.305] (==) Automatically adding devices
[    17.305] (==) Automatically enabling devices
[    17.323] (==) FontPath set to:
        /usr/X11R6/lib/X11/fonts/misc/,
        /usr/X11R6/lib/X11/fonts/TTF/,
        /usr/X11R6/lib/X11/fonts/OTF/,
        /usr/X11R6/lib/X11/fonts/Type1/,
        /usr/X11R6/lib/X11/fonts/100dpi/,
        /usr/X11R6/lib/X11/fonts/75dpi/
[    17.323] (==) ModulePath set to "/usr/X11R6/lib/modules"
[    17.323] (II) The server relies on wscons to provide the list of input devices.
        If no devices become available, reconfigure wscons or disable AutoAddDevices.
[    17.323] (II) Loader magic: 0xea4a5db5400
[    17.323] (II) Module ABI versions:
[    17.323] X.Org ANSI C Emulation: 0.4
[    17.323] X.Org Video Driver: 12.0
[    17.323] X.Org XInput driver : 16.0
[    17.323] X.Org Server Extension : 6.0
[    17.325] (--) PCI:*(0:0:2:0) 8086:a011:1b0a:00c7 rev 0, Mem @ 0xfe380000/524288, 0xe0000000/268435456, 0xfe100000/1048576, I/O @ 0x0000f170/8
[    17.325] (--) PCI: (0:0:2:1) 8086:a012:1b0a:00c7 rev 0, Mem @ 0xfe300000/524288
[    17.325] (II) LoadModule: "extmod"
[    17.332] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
[    17.335] (II) Module extmod: vendor="X.Org Foundation"
[    17.335] compiled for 1.12.3, module version = 1.0.0
[    17.335] Module class: X.Org Server Extension
[    17.335] ABI class: X.Org Server Extension, version 6.0
[    17.335] (II) Loading extension MIT-SCREEN-SAVER
[    17.335] (II) Loading extension XFree86-VidModeExtension
[    17.335] (II) Loading extension XFree86-DGA
[    17.335] (II) Loading extension DPMS
[    17.335] (II) Loading extension XVideo
[    17.336] (II) Loading extension XVideo-MotionCompensation
[    17.336] (II) Loading extension X-Resource
[    17.336] (II) LoadModule: "dbe"
[    17.338] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
[    17.340] (II) Module dbe: vendor="X.Org Foundation"
[    17.340] compiled for 1.12.3, module version = 1.0.0
[    17.340] Module class: X.Org Server Extension
[    17.340] ABI class: X.Org Server Extension, version 6.0
[    17.340] (II) Loading extension DOUBLE-BUFFER
[    17.340] (II) LoadModule: "glx"
[    17.342] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
[    17.347] (II) Module glx: vendor="X.Org Foundation"
[    17.347] compiled for 1.12.3, module version = 1.0.0
[    17.347] ABI class: X.Org Server Extension, version 6.0
[    17.348] (==) AIGLX enabled
[    17.348] (II) Loading extension GLX
[    17.348] (II) LoadModule: "record"
[    17.350] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
[    17.352] (II) Module record: vendor="X.Org Foundation"
[    17.352] compiled for 1.12.3, module version = 1.13.0
[    17.352] Module class: X.Org Server Extension
[    17.352] ABI class: X.Org Server Extension, version 6.0
[    17.352] (II) Loading extension RECORD
[    17.352] (II) LoadModule: "dri"
[    17.354] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
[    17.357] (II) Module dri: vendor="X.Org Foundation"
[    17.357] compiled for 1.12.3, module version = 1.0.0
[    17.357] ABI class: X.Org Server Extension, version 6.0
[    17.358] (II) Loading extension XFree86-DRI
[    17.358] (II) LoadModule: "dri2"
[    17.360] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
[    17.362] (II) Module dri2: vendor="X.Org Foundation"
[    17.362] compiled for 1.12.3, module version = 1.2.0
[    17.362] ABI class: X.Org Server Extension, version 6.0
[    17.362] (II) Loading extension DRI2
[    17.363] (==) Matched intel as autoconfigured driver 0
[    17.363] (==) Matched vesa as autoconfigured driver 1
[    17.363] (==) Assigned the driver to the xf86ConfigLayout
[    17.363] (II) LoadModule: "intel"
[    17.364] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
[    17.373] (II) Module intel: vendor="X.Org Foundation"
[    17.373] compiled for 1.12.3, module version = 2.12.0
[    17.373] Module class: X.Org Video Driver
[    17.373] ABI class: X.Org Video Driver, version 12.0
[    17.374] (II) LoadModule: "vesa"
[    17.376] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
[    17.378] (II) Module vesa: vendor="X.Org Foundation"
[    17.378] compiled for 1.12.3, module version = 2.3.2
[    17.378] Module class: X.Org Video Driver
[    17.378] ABI class: X.Org Video Driver, version 12.0
[    17.378] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
        i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
        E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
        965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
        4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
        Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
        Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
        Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
        Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
        Ivybridge Desktop (GT1), Ivybridge Desktop (GT2),
        Ivybridge Server (GT1), Ivybridge Server (GT2)
[    17.379] (II) VESA: driver for VESA chipsets: vesa
[    17.379] (WW) Falling back to old probe method for vesa
[    17.380] (II) Loading sub module "vgahw"
[    17.380] (II) LoadModule: "vgahw"
[    17.384] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
[    17.386] (II) Module vgahw: vendor="X.Org Foundation"
[    17.386] compiled for 1.12.3, module version = 0.1.0
[    17.386] ABI class: X.Org Video Driver, version 12.0
[    17.386] (II) Loading sub module "ramdac"
[    17.386] (II) LoadModule: "ramdac"
[    17.386] (II) Module "ramdac" already built-in
[    17.387] drmOpenDevice: node name is /dev/drm0
[    17.387] drmOpenDevice: open result is 10, (OK)
[    17.387] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[    17.387] drmOpenDevice: node name is /dev/drm0
[    17.388] drmOpenDevice: open result is 10, (OK)
[    17.388] drmOpenByBusid: drmOpenMinor returns 10
[    17.388] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[    17.388] (II) intel(0): Creating default Display subsection in Screen section
        "Default Screen Section" for depth/fbbpp 24/32
[    17.388] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[    17.388] (==) intel(0): RGB weight 888
[    17.388] (==) intel(0): Default visual is TrueColor
[    17.389] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
[    17.389] (--) intel(0): Chipset: "Pineview GM"
[    17.389] (--) intel(0): Linear framebuffer at 0xE0000000
[    17.389] (--) intel(0): IO registers at addr 0xFE380000 size 524288
[    17.390] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
[    17.390] (II) intel(0): No SDVO device is found in VBT
[    17.392] (II) intel(0): 2 display pipes available.
[    17.393] (II) Loading sub module "ddc"
[    17.393] (II) LoadModule: "ddc"
[    17.393] (II) Module "ddc" already built-in
[    17.393] (II) Loading sub module "i2c"
[    17.393] (II) LoadModule: "i2c"
[    17.393] (II) Module "i2c" already built-in
[    17.393] (II) intel(0): Output VGA has no monitor section
[    17.393] (II) intel(0): Output LVDS has no monitor section
[    17.394] (II) intel(0): I2C bus "LVDSDDC_C" initialized.
[    17.394] (II) intel(0): Attempting to determine panel fixed mode.
[    17.395] (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
[    17.398] (II) intel(0): EDID for output LVDS
[    17.480] (II) intel(0): EDID for output VGA
[    17.484] (II) intel(0): EDID for output LVDS
[    17.484] (II) intel(0): Printing probed modes for output LVDS
[    17.484] (II) intel(0): Modeline "1366x768"x60.0   76.85  1366 1414 1446 1560  768 771 783 821 (49.3 kHz P)
[    17.484] (II) intel(0): Output VGA disconnected
[    17.484] (II) intel(0): Output LVDS connected
[    17.484] (II) intel(0): Using exact sizes for initial modes
[    17.484] (II) intel(0): Output LVDS using initial mode 1366x768
[    17.484] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[    18.274] (II) intel(0): detected 1024 kB GTT.
[    18.274] (II) intel(0): detected 8188 kB stolen memory.
[    18.274] (==) intel(0): video overlay key set to 0x101fe
[    18.274] (==) intel(0): DPI set to (96, 96)
[    18.274] (II) Loading sub module "fb"
[    18.274] (II) LoadModule: "fb"
[    18.277] (II) Loading /usr/X11R6/lib/modules/libfb.so
[    18.281] (II) Module fb: vendor="X.Org Foundation"
[    18.281] compiled for 1.12.3, module version = 1.0.0
[    18.281] ABI class: X.Org ANSI C Emulation, version 0.4
[    18.281] (II) UnloadModule: "vesa"
[    18.281] (II) Unloading vesa
[    18.281] (==) Depth 24 pixmap format is 32 bpp
[    18.282] (II) intel(0): Kernel reported 491520 total, 0 used
[    18.282] (II) intel(0): I830CheckAvailableMemory: 1966080 kB available
[    18.283] (II) intel(0): [DRI2] Setup complete
[    18.283] (II) intel(0): [DRI2]   DRI driver: i915
[    18.283] (**) intel(0): Framebuffer tiled
[    18.283] (**) intel(0): Pixmaps tiled
[    18.283] (**) intel(0): 3D buffers tiled
[    18.283] (**) intel(0): SwapBuffers wait enabled
[    18.290] (==) intel(0): VideoRam: 262144 KB
[    18.291] (II) intel(0): Allocated new frame buffer 1408x768 stride 8192, tiled
[    18.292] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
[    18.298] (II) UXA(0): Driver registered support for the following operations:
[    18.298] (II)         solid
[    18.298] (II)         copy
[    18.298] (II)         composite (RENDER acceleration)
[    18.298] (II)         put_image
[    18.298] (II)         get_image
[    18.298] (==) intel(0): Backing store disabled
[    18.298] (==) intel(0): Silken mouse disabled
[    18.299] (II) intel(0): Initializing HW Cursor
[    18.686] (II) intel(0): Fixed memory allocation layout:
[    18.686] (II) intel(0): 0x007ff000:            end of stolen memory
[    18.686] (II) intel(0): 0x007ff000-0x0fffffff: DRI memory manager (253956 kB)
[    18.687] (II) intel(0): 0x10000000:            end of aperture
[    18.687] (II) intel(0): BO memory allocation layout:
[    18.687] (II) intel(0): 0x007ff000:            start of memory manager
[    18.687] (II) intel(0): 0x00820000-0x00820fff: overlay registers (4 kB)
[    18.687] (II) intel(0): 0x00821000-0x0082afff: HW cursors (40 kB)
[    18.687] (II) intel(0): 0x10000000:            end of memory manager
[    18.880] is lvds
[    18.900] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
[    19.280] (II) intel(0): Output configuration:
[    19.280] (II) intel(0):   Pipe A is off
[    19.280] (II) intel(0):   Display plane A is now disabled and connected to pipe A.
[    19.280] (II) intel(0):   Pipe B is on
[    19.280] (II) intel(0):   Display plane B is now enabled and connected to pipe B.
[    19.280] (II) intel(0):   Output VGA is connected to pipe none
[    19.280] (II) intel(0):   Output LVDS is connected to pipe B
[    19.280] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[    19.284] (==) intel(0): DPMS enabled
[    19.284] (==) intel(0): Intel XvMC decoder disabled
[    19.285] (II) intel(0): Set up textured video
[    19.285] (II) intel(0): Set up overlay video
[    19.286] (II) intel(0): direct rendering: DRI2 Enabled
[    19.287] (--) RandR disabled
[    19.287] (II) Initializing built-in extension Generic Event Extension
[    19.287] (II) Initializing built-in extension SHAPE
[    19.287] (II) Initializing built-in extension MIT-SHM
[    19.287] (II) Initializing built-in extension XInputExtension
[    19.287] (II) Initializing built-in extension XTEST
[    19.287] (II) Initializing built-in extension BIG-REQUESTS
[    19.287] (II) Initializing built-in extension SYNC
[    19.287] (II) Initializing built-in extension XKEYBOARD
[    19.287] (II) Initializing built-in extension XC-MISC
[    19.287] (II) Initializing built-in extension SECURITY
[    19.287] (II) Initializing built-in extension XINERAMA
[    19.287] (II) Initializing built-in extension XFIXES
[    19.287] (II) Initializing built-in extension RENDER
[    19.287] (II) Initializing built-in extension RANDR
[    19.287] (II) Initializing built-in extension COMPOSITE
[    19.287] (II) Initializing built-in extension DAMAGE
[    19.421] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[    19.421] (II) AIGLX: enabled GLX_INTEL_swap_event
[    19.421] (II) AIGLX: enabled GLX_SGI_make_current_read
[    19.421] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[    19.422] (II) AIGLX: Loaded and initialized i915
[    19.422] (II) GLX: Initialized DRI2 GL provider for screen 0
[    19.424] (II) intel(0): Setting screen physical size to 361 x 203
[    20.016] (II) config/wscons: checking input device /dev/wskbd
[    20.016] (II) wskbd: using layout us
[    20.016] (II) LoadModule: "kbd"
[    20.018] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
[    20.020] (II) Module kbd: vendor="X.Org Foundation"
[    20.020] compiled for 1.12.3, module version = 1.6.2
[    20.020] Module class: X.Org XInput Driver
[    20.020] ABI class: X.Org XInput driver, version 16.0
[    20.020] (II) Using input driver 'kbd' for '/dev/wskbd'
[    20.021] (**) /dev/wskbd: always reports core events
[    20.021] (**) /dev/wskbd: always reports core events
[    20.021] (**) Option "Protocol" "standard"
[    20.021] (**) Option "XkbRules" "base"
[    20.021] (**) Option "XkbModel" "pc105"
[    20.021] (**) Option "XkbLayout" "us"
[    20.021] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
[    20.060] (II) config/wscons: checking input device /dev/wsmouse0
[    20.060] (II) LoadModule: "ws"
[    20.062] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
[    20.064] (II) Module ws: vendor="X.Org Foundation"
[    20.064] compiled for 1.12.3, module version = 1.3.0
[    20.064] Module class: X.Org XInput Driver
[    20.064] ABI class: X.Org XInput driver, version 16.0
[    20.064] (II) Using input driver 'ws' for '/dev/wsmouse0'
[    20.064] (**) /dev/wsmouse0: always reports core events
[    20.065] (II) ws: /dev/wsmouse0: debuglevel 0
[    20.065] (**) Option "Device" "/dev/wsmouse0"
[    20.065] (**) ws: /dev/wsmouse0: ZAxisMapping: buttons 4 and 5
[    20.065] (**) ws: /dev/wsmouse0: WAxisMapping: buttons 6 and 7
[    20.065] (**) ws: /dev/wsmouse0: associated screen: 0
[    20.065] (**) ws: /dev/wsmouse0: device will work in raw mode
[    20.065] (II) ws: /dev/wsmouse0: minimum x position: 0
[    20.065] (II) ws: /dev/wsmouse0: maximum x position: 4095
[    20.065] (II) ws: /dev/wsmouse0: minimum y position: 0
[    20.065] (II) ws: /dev/wsmouse0: maximum y position: 4095
[    20.065] (==) ws: /dev/wsmouse0: Buttons: 7
[    20.100] (**) ws: /dev/wsmouse0: YAxisMapping: buttons 4 and 5
[    20.100] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type: TOUCHSCREEN, id 7)
[    20.100] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
[    20.100] (**) /dev/wsmouse0: (accel) acceleration profile 0
[    20.100] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
[    20.100] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
[    20.101] (II) config/wscons: checking input device /dev/wsmouse1
[    20.101] (II) Using input driver 'ws' for '/dev/wsmouse1'
[    20.101] (**) /dev/wsmouse1: always reports core events
[    20.101] (II) ws: /dev/wsmouse1: debuglevel 0
[    20.101] (**) Option "Device" "/dev/wsmouse1"
[    20.101] (**) ws: /dev/wsmouse1: ZAxisMapping: buttons 4 and 5
[    20.101] (**) ws: /dev/wsmouse1: WAxisMapping: buttons 6 and 7
[    20.101] (**) ws: /dev/wsmouse1: associated screen: 0
[    20.101] (**) ws: /dev/wsmouse1: device will work in raw mode
[    20.101] (II) ws: /dev/wsmouse1: minimum x position: 0
[    20.101] (II) ws: /dev/wsmouse1: maximum x position: 32767
[    20.101] (II) ws: /dev/wsmouse1: minimum y position: 0
[    20.101] (II) ws: /dev/wsmouse1: maximum y position: 32767
[    20.101] (==) ws: /dev/wsmouse1: Buttons: 7
[    20.101] (**) ws: /dev/wsmouse1: YAxisMapping: buttons 4 and 5
[    20.101] (II) XINPUT: Adding extended input device "/dev/wsmouse1" (type: TOUCHSCREEN, id 8)
[    20.102] (**) /dev/wsmouse1: (accel) keeping acceleration scheme 1
[    20.102] (**) /dev/wsmouse1: (accel) acceleration profile 0
[    20.102] (**) /dev/wsmouse1: (accel) acceleration factor: 2.000
[    20.102] (**) /dev/wsmouse1: (accel) acceleration threshold: 4
[    20.140] (II) config/wscons: checking input device /dev/wsmouse
[    20.140] (II) Using input driver 'ws' for '/dev/wsmouse'
[    20.140] (**) /dev/wsmouse: always reports core events
[    20.140] (II) ws: /dev/wsmouse: debuglevel 0
[    20.140] (**) Option "Device" "/dev/wsmouse"
[    20.140] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
[    20.140] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
[    20.140] (**) ws: /dev/wsmouse: associated screen: 0
[    20.140] (II) ws: /dev/wsmouse: minimum x position: 0
[    20.140] (II) ws: /dev/wsmouse: maximum x position: 1365
[    20.140] (II) ws: /dev/wsmouse: minimum y position: 0
[    20.140] (II) ws: /dev/wsmouse: maximum y position: 767
[    20.140] (==) ws: /dev/wsmouse: Buttons: 7
[    20.180] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
[    20.180] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 9)
[    20.180] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
[    20.180] (**) /dev/wsmouse: (accel) acceleration profile 0
[    20.180] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
[    20.180] (**) /dev/wsmouse: (accel) acceleration threshold: 4

Reply | Threaded
Open this post in threaded view
|

Re: eGalax touchscreen for Exopc

Tomas Bodzar-4
On Mon, Nov 5, 2012 at 12:42 AM, Brett <[hidden email]> wrote:

> Hi,
>
> I've just installed amd64 snapshot on an Exopc and am trying to see if it can use the touchscreen. From the dmesg below, its an uhts(4) "eGalax Inc. USB TouchController" rev 1.10/10.06.
>
> I tried to use xtsscale -v -d 7 and -d 8 to calibrate the pointer (7 is wsmouse0, 8 is wsmouse1). In both cases, the "touch screen calibration" screen comes up, but it does not detect me pressing the screen. Is there much chance of getting this touchscreen to work?
>
> dmesg, usbdevs, and Xorg.0.log follow.
>
> Thanks,
> Brett.
>
>
> OpenBSD 5.2-current (GENERIC.MP) #96: Sat Nov  3 14:43:34 MDT 2012
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 2134208512 (2035MB)
> avail mem = 2054971392 (1959MB)
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xe9150 (52 entries)
> bios0: vendor American Megatrends Inc. version "Lucid-CE-133" date 11/22/2010
> bios0: EXOPC EXOPG06411
> acpi0 at bios0: rev 3
> acpi0: sleep states S0 S1 S3 S4 S5
> acpi0: tables DSDT FACP APIC MCFG SLIC HPET ECDT
> acpi0: wakeup devices P0P3(S4) USB0(S3) USB1(S3) USB2(S3) EUB1(S3) USB4(S3) EUB2(S3) P0P9(S4) P0PA(S4) P0PB(S4) P0PC(S4) P0PD(S4) P0PE(S4) AC0_(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz, 1679.47 MHz
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF
> cpu0: 512KB 64b/line 8-way L2 cache
> cpu0: apic clock running at 167MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Atom(TM) CPU N450 @ 1.66GHz, 1679.23 MHz
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,DTES64,MWAIT,DS-CPL,EST,TM2,SSSE3,CX16,xTPR,PDCM,MOVBE,NXE,LONG,LAHF
> cpu1: 512KB 64b/line 8-way L2 cache
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 20, 24 pins
> acpimcfg0 at acpi0 addr 0xf0000000, bus 0-63
> acpihpet0 at acpi0: 14318179 Hz
> acpiec0 at acpi0
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 3 (P0P3)
> acpiprt2 at acpi0: bus 1 (P0P9)
> acpiprt3 at acpi0: bus -1 (P0PA)
> acpiprt4 at acpi0: bus 2 (P0PB)
> acpiprt5 at acpi0: bus -1 (P0PC)
> acpiprt6 at acpi0: bus -1 (P0PD)
> acpiprt7 at acpi0: bus -1 (P0PE)
> acpiec at acpi0 not configured
> acpicpu0 at acpi0:, C3, C2, C1, PSS
> acpicpu1 at acpi0:, C3, C2, C1, PSS
> acpiac0 at acpi0: AC unit online
> acpibat0 at acpi0: BAT0
> acpibtn0 at acpi0: PWRB
> acpiasus at acpi0 not configured
> cpu0: Enhanced SpeedStep 1679 MHz: speeds: 1667, 1500, 1334, 1167, 1000 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Pineview DMI" rev 0x00
> vga1 at pci0 dev 2 function 0 "Intel Pineview Video" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
> inteldrm0 at vga1: apic 4 int 16
> drm0 at inteldrm0
> "Intel Pineview Video" rev 0x00 at pci0 dev 2 function 1 not configured
> uhci0 at pci0 dev 26 function 0 "Intel 82801H USB" rev 0x04: apic 4 int 16
> uhci1 at pci0 dev 26 function 1 "Intel 82801H USB" rev 0x04: apic 4 int 21
> ehci0 at pci0 dev 26 function 7 "Intel 82801H USB" rev 0x04: apic 4 int 18
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> azalia0 at pci0 dev 27 function 0 "Intel 82801H HD Audio" rev 0x04: msi
> azalia0: codecs: Realtek ALC269
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801H PCIE" rev 0x04: msi
> pci1 at ppb0 bus 1
> athn0 at pci1 dev 0 function 0 "Atheros AR9285" rev 0x01: apic 4 int 16
> athn0: AR9285 rev 2 (1T1R), ROM rev 14, address 48:5d:60:22:03:07
> ppb1 at pci0 dev 28 function 2 "Intel 82801H PCIE" rev 0x04: msi
> pci2 at ppb1 bus 2
> vendor "Broadcom", unknown product 0x1615 (class multimedia subclass miscellaneous, rev 0x00) at pci2 dev 0 function 0 not configured
> uhci2 at pci0 dev 29 function 0 "Intel 82801H USB" rev 0x04: apic 4 int 23
> uhci3 at pci0 dev 29 function 1 "Intel 82801H USB" rev 0x04: apic 4 int 19
> uhci4 at pci0 dev 29 function 2 "Intel 82801H USB" rev 0x04: apic 4 int 18
> ehci1 at pci0 dev 29 function 7 "Intel 82801H USB" rev 0x04: apic 4 int 23
> usb1 at ehci1: USB revision 2.0
> uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xf4
> pci3 at ppb2 bus 3
> pcib0 at pci0 dev 31 function 0 "Intel 82801HBM LPC" rev 0x04
> pciide0 at pci0 dev 31 function 1 "Intel 82801HBM IDE" rev 0x04: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
> pciide0: channel 0 disabled (no drives)
> pciide0: channel 1 disabled (no drives)
> pciide1 at pci0 dev 31 function 2 "Intel 82801HBM SATA" rev 0x04: DMA, channel 0 configured to native-PCI, channel 1 configured to native-PCI
> pciide1: using apic 4 int 18 for native-PCI interrupt
> wd0 at pciide1 channel 0 drive 0: <SanDisk SSD P4 64GB>
> wd0: 1-sector PIO, LBA48, 61057MB, 125045424 sectors
> wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 6
> ichiic0 at pci0 dev 31 function 3 "Intel 82801H SMBus" rev 0x04: apic 4 int 18
> iic0 at ichiic0
> spdmem0 at iic0 addr 0x50: 2GB DDR2 SDRAM non-parity PC2-6400CL5 SO-DIMM
> usb2 at uhci0: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci1: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci2: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb5 at uhci3: USB revision 1.0
> uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb6 at uhci4: USB revision 1.0
> uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> mtrr: Pentium Pro MTRR support
> uvideo0 at uhub1 port 6 configuration 1 interface 0 "Chicony Electronics Co., Ltd. USB 2.0 Camera" rev 2.00/55.51 addr 2
> video0 at uvideo0
> uhidev0 at uhub2 port 1 configuration 1 interface 0 "eGalax Inc. USB TouchController" rev 1.10/10.06 addr 2
> uhidev0: iclass 3/1, 5 report ids
> uhid0 at uhidev0 reportid 1: input=5, output=0, feature=0
> uhts0 at uhidev0 reportid 2
> wsmouse0 at uhts0 mux 0
> uhid1 at uhidev0 reportid 3: input=63, output=63, feature=0
> uhts1 at uhidev0 reportid 4
> wsmouse1 at uhts1 mux 0
> uhid2 at uhidev0 reportid 5: input=0, output=0, feature=2
> uhidev1 at uhub4 port 1 configuration 1 interface 0 "Holtek product 0x1203" rev 2.00/2.80 addr 2
> uhidev1: iclass 3/1
> ukbd0 at uhidev1: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev2 at uhub4 port 1 configuration 1 interface 1 "Holtek product 0x1203" rev 2.00/2.80 addr 2
> uhidev2: iclass 3/0, 2 report ids
> uhid3 at uhidev2 reportid 1: input=1, output=0, feature=0
> uhid4 at uhidev2 reportid 2: input=3, output=0, feature=0
> uhidev3 at uhub4 port 2 configuration 1 interface 0 "Genesys Logic Quick Quick Cat !" rev 1.10/1.00 addr 3
> uhidev3: iclass 3/1
> ums0 at uhidev3: 3 buttons
> wsmouse2 at ums0 mux 0
> ugen0 at uhub5 port 1 "AsureWave product 0x3304" rev 1.10/0.01 addr 2
> vscsi0 at root
> scsibus0 at vscsi0: 256 targets
> softraid0 at root
> scsibus1 at softraid0: 256 targets
> root on wd0a (fc9db7d381061194.a) swap on wd0b dump on wd0b
> wsmouse2 detached
> ums0 detached
> uhidev3 detached
>

Can you post pcidump -v for vga as well? Curious why dmesg shows not
configured (as Pineview devices are supported in system) and X is able
to choose driver. Maybe some different revision of device or something
like that.

> ======
>
> Controller /dev/usb0:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00
>  port 1 powered
>  port 2 powered
>  port 3 powered
>  port 4 powered
> Controller /dev/usb1:
> addr 1: high speed, self powered, config 1, EHCI root hub(0x0000), Intel(0x8086), rev 1.00
>  port 1 powered
>  port 2 powered
>  port 3 powered
>  port 4 powered
>  port 5 powered
>  port 6 addr 2: high speed, power 500 mA, config 1, USB 2.0 Camera(0xb213), Chicony Electronics Co., Ltd.(0x04f2), rev 55.51, iSerialNumber SN0001
> Controller /dev/usb2:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
>  port 1 addr 2: full speed, power 100 mA, config 1, USB TouchController(0x72a1), eGalax Inc.(0x0eef), rev 10.06
>  port 2 powered
> Controller /dev/usb3:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
>  port 1 powered
>  port 2 powered
> Controller /dev/usb4:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
>  port 1 addr 2: low speed, power 100 mA, config 1, product 0x1203(0x1203), Holtek(0x04d9), rev 2.80
>  port 2 powered
> Controller /dev/usb5:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
>  port 1 addr 2: full speed, self powered, config 1, product 0x3304(0x3304), AsureWave(0x13d3), rev 0.01
>  port 2 powered
> Controller /dev/usb6:
> addr 1: full speed, self powered, config 1, UHCI root hub(0x0000), Intel(0x8086), rev 1.00
>  port 1 powered
>  port 2 powered
>
> ======
>
> [    17.253] (--) checkDevMem: using aperture driver /dev/xf86
> [    17.275] (--) Using wscons driver on /dev/ttyC4 in pcvt compatibility mode (version 3.32)
> [    17.295]
> X.Org X Server 1.12.3
> Release Date: 2012-07-09
> [    17.295] X Protocol Version 11, Revision 0
> [    17.295] Build Operating System: OpenBSD 5.2 amd64
> [    17.295] Current Operating System: OpenBSD foo.my.domain 5.2 GENERIC.MP#96 amd64
> [    17.296] Build Date: 02 November 2012  12:49:18AM
> [    17.296]
> [    17.296] Current version of pixman: 0.26.2
> [    17.296]    Before reporting problems, check http://wiki.x.org
>         to make sure that you have the latest version.
> [    17.296] Markers: (--) probed, (**) from config file, (==) default setting,
>         (++) from command line, (!!) notice, (II) informational,
>         (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
> [    17.296] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Nov  5 20:25:36 2012
> [    17.299] (==) Using config file: "/etc/X11/xorg.conf"
> [    17.300] (==) Using system config directory "/usr/X11R6/share/X11/xorg.conf.d"
> [    17.303] (==) No Layout section.  Using the first Screen section.
> [    17.303] (==) No screen section available. Using defaults.
> [    17.303] (**) |-->Screen "Default Screen Section" (0)
> [    17.304] (**) |   |-->Monitor "<default monitor>"
> [    17.305] (==) No monitor specified for screen "Default Screen Section".
>         Using a default monitor configuration.
> [    17.305] (==) Disabling SIGIO handlers for input devices
> [    17.305] (==) Automatically adding devices
> [    17.305] (==) Automatically enabling devices
> [    17.323] (==) FontPath set to:
>         /usr/X11R6/lib/X11/fonts/misc/,
>         /usr/X11R6/lib/X11/fonts/TTF/,
>         /usr/X11R6/lib/X11/fonts/OTF/,
>         /usr/X11R6/lib/X11/fonts/Type1/,
>         /usr/X11R6/lib/X11/fonts/100dpi/,
>         /usr/X11R6/lib/X11/fonts/75dpi/
> [    17.323] (==) ModulePath set to "/usr/X11R6/lib/modules"
> [    17.323] (II) The server relies on wscons to provide the list of input devices.
>         If no devices become available, reconfigure wscons or disable AutoAddDevices.
> [    17.323] (II) Loader magic: 0xea4a5db5400
> [    17.323] (II) Module ABI versions:
> [    17.323]    X.Org ANSI C Emulation: 0.4
> [    17.323]    X.Org Video Driver: 12.0
> [    17.323]    X.Org XInput driver : 16.0
> [    17.323]    X.Org Server Extension : 6.0
> [    17.325] (--) PCI:*(0:0:2:0) 8086:a011:1b0a:00c7 rev 0, Mem @ 0xfe380000/524288, 0xe0000000/268435456, 0xfe100000/1048576, I/O @ 0x0000f170/8
> [    17.325] (--) PCI: (0:0:2:1) 8086:a012:1b0a:00c7 rev 0, Mem @ 0xfe300000/524288
> [    17.325] (II) LoadModule: "extmod"
> [    17.332] (II) Loading /usr/X11R6/lib/modules/extensions/libextmod.so
> [    17.335] (II) Module extmod: vendor="X.Org Foundation"
> [    17.335]    compiled for 1.12.3, module version = 1.0.0
> [    17.335]    Module class: X.Org Server Extension
> [    17.335]    ABI class: X.Org Server Extension, version 6.0
> [    17.335] (II) Loading extension MIT-SCREEN-SAVER
> [    17.335] (II) Loading extension XFree86-VidModeExtension
> [    17.335] (II) Loading extension XFree86-DGA
> [    17.335] (II) Loading extension DPMS
> [    17.335] (II) Loading extension XVideo
> [    17.336] (II) Loading extension XVideo-MotionCompensation
> [    17.336] (II) Loading extension X-Resource
> [    17.336] (II) LoadModule: "dbe"
> [    17.338] (II) Loading /usr/X11R6/lib/modules/extensions/libdbe.so
> [    17.340] (II) Module dbe: vendor="X.Org Foundation"
> [    17.340]    compiled for 1.12.3, module version = 1.0.0
> [    17.340]    Module class: X.Org Server Extension
> [    17.340]    ABI class: X.Org Server Extension, version 6.0
> [    17.340] (II) Loading extension DOUBLE-BUFFER
> [    17.340] (II) LoadModule: "glx"
> [    17.342] (II) Loading /usr/X11R6/lib/modules/extensions/libglx.so
> [    17.347] (II) Module glx: vendor="X.Org Foundation"
> [    17.347]    compiled for 1.12.3, module version = 1.0.0
> [    17.347]    ABI class: X.Org Server Extension, version 6.0
> [    17.348] (==) AIGLX enabled
> [    17.348] (II) Loading extension GLX
> [    17.348] (II) LoadModule: "record"
> [    17.350] (II) Loading /usr/X11R6/lib/modules/extensions/librecord.so
> [    17.352] (II) Module record: vendor="X.Org Foundation"
> [    17.352]    compiled for 1.12.3, module version = 1.13.0
> [    17.352]    Module class: X.Org Server Extension
> [    17.352]    ABI class: X.Org Server Extension, version 6.0
> [    17.352] (II) Loading extension RECORD
> [    17.352] (II) LoadModule: "dri"
> [    17.354] (II) Loading /usr/X11R6/lib/modules/extensions/libdri.so
> [    17.357] (II) Module dri: vendor="X.Org Foundation"
> [    17.357]    compiled for 1.12.3, module version = 1.0.0
> [    17.357]    ABI class: X.Org Server Extension, version 6.0
> [    17.358] (II) Loading extension XFree86-DRI
> [    17.358] (II) LoadModule: "dri2"
> [    17.360] (II) Loading /usr/X11R6/lib/modules/extensions/libdri2.so
> [    17.362] (II) Module dri2: vendor="X.Org Foundation"
> [    17.362]    compiled for 1.12.3, module version = 1.2.0
> [    17.362]    ABI class: X.Org Server Extension, version 6.0
> [    17.362] (II) Loading extension DRI2
> [    17.363] (==) Matched intel as autoconfigured driver 0
> [    17.363] (==) Matched vesa as autoconfigured driver 1
> [    17.363] (==) Assigned the driver to the xf86ConfigLayout
> [    17.363] (II) LoadModule: "intel"
> [    17.364] (II) Loading /usr/X11R6/lib/modules/drivers/intel_drv.so
> [    17.373] (II) Module intel: vendor="X.Org Foundation"
> [    17.373]    compiled for 1.12.3, module version = 2.12.0
> [    17.373]    Module class: X.Org Video Driver
> [    17.373]    ABI class: X.Org Video Driver, version 12.0
> [    17.374] (II) LoadModule: "vesa"
> [    17.376] (II) Loading /usr/X11R6/lib/modules/drivers/vesa_drv.so
> [    17.378] (II) Module vesa: vendor="X.Org Foundation"
> [    17.378]    compiled for 1.12.3, module version = 2.3.2
> [    17.378]    Module class: X.Org Video Driver
> [    17.378]    ABI class: X.Org Video Driver, version 12.0
> [    17.378] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
>         i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
>         E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
>         965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
>         4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
>         Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
>         Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
>         Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
>         Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
>         Ivybridge Desktop (GT1), Ivybridge Desktop (GT2),
>         Ivybridge Server (GT1), Ivybridge Server (GT2)
> [    17.379] (II) VESA: driver for VESA chipsets: vesa
> [    17.379] (WW) Falling back to old probe method for vesa
> [    17.380] (II) Loading sub module "vgahw"
> [    17.380] (II) LoadModule: "vgahw"
> [    17.384] (II) Loading /usr/X11R6/lib/modules/libvgahw.so
> [    17.386] (II) Module vgahw: vendor="X.Org Foundation"
> [    17.386]    compiled for 1.12.3, module version = 0.1.0
> [    17.386]    ABI class: X.Org Video Driver, version 12.0
> [    17.386] (II) Loading sub module "ramdac"
> [    17.386] (II) LoadModule: "ramdac"
> [    17.386] (II) Module "ramdac" already built-in
> [    17.387] drmOpenDevice: node name is /dev/drm0
> [    17.387] drmOpenDevice: open result is 10, (OK)
> [    17.387] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
> [    17.387] drmOpenDevice: node name is /dev/drm0
> [    17.388] drmOpenDevice: open result is 10, (OK)
> [    17.388] drmOpenByBusid: drmOpenMinor returns 10
> [    17.388] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
> [    17.388] (II) intel(0): Creating default Display subsection in Screen section
>         "Default Screen Section" for depth/fbbpp 24/32
> [    17.388] (==) intel(0): Depth 24, (--) framebuffer bpp 32
> [    17.388] (==) intel(0): RGB weight 888
> [    17.388] (==) intel(0): Default visual is TrueColor
> [    17.389] (II) intel(0): Integrated Graphics Chipset: Intel(R) Pineview GM
> [    17.389] (--) intel(0): Chipset: "Pineview GM"
> [    17.389] (--) intel(0): Linear framebuffer at 0xE0000000
> [    17.389] (--) intel(0): IO registers at addr 0xFE380000 size 524288
> [    17.390] (WW) intel(0): libpciaccess reported 0 rom size, guessing 64kB
> [    17.390] (II) intel(0): No SDVO device is found in VBT
> [    17.392] (II) intel(0): 2 display pipes available.
> [    17.393] (II) Loading sub module "ddc"
> [    17.393] (II) LoadModule: "ddc"
> [    17.393] (II) Module "ddc" already built-in
> [    17.393] (II) Loading sub module "i2c"
> [    17.393] (II) LoadModule: "i2c"
> [    17.393] (II) Module "i2c" already built-in
> [    17.393] (II) intel(0): Output VGA has no monitor section
> [    17.393] (II) intel(0): Output LVDS has no monitor section
> [    17.394] (II) intel(0): I2C bus "LVDSDDC_C" initialized.
> [    17.394] (II) intel(0): Attempting to determine panel fixed mode.
> [    17.395] (II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
> [    17.398] (II) intel(0): EDID for output LVDS
> [    17.480] (II) intel(0): EDID for output VGA
> [    17.484] (II) intel(0): EDID for output LVDS
> [    17.484] (II) intel(0): Printing probed modes for output LVDS
> [    17.484] (II) intel(0): Modeline "1366x768"x60.0   76.85  1366 1414 1446 1560  768 771 783 821 (49.3 kHz P)
> [    17.484] (II) intel(0): Output VGA disconnected
> [    17.484] (II) intel(0): Output LVDS connected
> [    17.484] (II) intel(0): Using exact sizes for initial modes
> [    17.484] (II) intel(0): Output LVDS using initial mode 1366x768
> [    17.484] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
> [    18.274] (II) intel(0): detected 1024 kB GTT.
> [    18.274] (II) intel(0): detected 8188 kB stolen memory.
> [    18.274] (==) intel(0): video overlay key set to 0x101fe
> [    18.274] (==) intel(0): DPI set to (96, 96)
> [    18.274] (II) Loading sub module "fb"
> [    18.274] (II) LoadModule: "fb"
> [    18.277] (II) Loading /usr/X11R6/lib/modules/libfb.so
> [    18.281] (II) Module fb: vendor="X.Org Foundation"
> [    18.281]    compiled for 1.12.3, module version = 1.0.0
> [    18.281]    ABI class: X.Org ANSI C Emulation, version 0.4
> [    18.281] (II) UnloadModule: "vesa"
> [    18.281] (II) Unloading vesa
> [    18.281] (==) Depth 24 pixmap format is 32 bpp
> [    18.282] (II) intel(0): Kernel reported 491520 total, 0 used
> [    18.282] (II) intel(0): I830CheckAvailableMemory: 1966080 kB available
> [    18.283] (II) intel(0): [DRI2] Setup complete
> [    18.283] (II) intel(0): [DRI2]   DRI driver: i915
> [    18.283] (**) intel(0): Framebuffer tiled
> [    18.283] (**) intel(0): Pixmaps tiled
> [    18.283] (**) intel(0): 3D buffers tiled
> [    18.283] (**) intel(0): SwapBuffers wait enabled
> [    18.290] (==) intel(0): VideoRam: 262144 KB
> [    18.291] (II) intel(0): Allocated new frame buffer 1408x768 stride 8192, tiled
> [    18.292] (II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0
> [    18.298] (II) UXA(0): Driver registered support for the following operations:
> [    18.298] (II)         solid
> [    18.298] (II)         copy
> [    18.298] (II)         composite (RENDER acceleration)
> [    18.298] (II)         put_image
> [    18.298] (II)         get_image
> [    18.298] (==) intel(0): Backing store disabled
> [    18.298] (==) intel(0): Silken mouse disabled
> [    18.299] (II) intel(0): Initializing HW Cursor
> [    18.686] (II) intel(0): Fixed memory allocation layout:
> [    18.686] (II) intel(0): 0x007ff000:            end of stolen memory
> [    18.686] (II) intel(0): 0x007ff000-0x0fffffff: DRI memory manager (253956 kB)
> [    18.687] (II) intel(0): 0x10000000:            end of aperture
> [    18.687] (II) intel(0): BO memory allocation layout:
> [    18.687] (II) intel(0): 0x007ff000:            start of memory manager
> [    18.687] (II) intel(0): 0x00820000-0x00820fff: overlay registers (4 kB)
> [    18.687] (II) intel(0): 0x00821000-0x0082afff: HW cursors (40 kB)
> [    18.687] (II) intel(0): 0x10000000:            end of memory manager
> [    18.880] is lvds
> [    18.900] (II) intel(0): Selecting standard 18 bit TMDS pixel format.
> [    19.280] (II) intel(0): Output configuration:
> [    19.280] (II) intel(0):   Pipe A is off
> [    19.280] (II) intel(0):   Display plane A is now disabled and connected to pipe A.
> [    19.280] (II) intel(0):   Pipe B is on
> [    19.280] (II) intel(0):   Display plane B is now enabled and connected to pipe B.
> [    19.280] (II) intel(0):   Output VGA is connected to pipe none
> [    19.280] (II) intel(0):   Output LVDS is connected to pipe B
> [    19.280] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
> [    19.284] (==) intel(0): DPMS enabled
> [    19.284] (==) intel(0): Intel XvMC decoder disabled
> [    19.285] (II) intel(0): Set up textured video
> [    19.285] (II) intel(0): Set up overlay video
> [    19.286] (II) intel(0): direct rendering: DRI2 Enabled
> [    19.287] (--) RandR disabled
> [    19.287] (II) Initializing built-in extension Generic Event Extension
> [    19.287] (II) Initializing built-in extension SHAPE
> [    19.287] (II) Initializing built-in extension MIT-SHM
> [    19.287] (II) Initializing built-in extension XInputExtension
> [    19.287] (II) Initializing built-in extension XTEST
> [    19.287] (II) Initializing built-in extension BIG-REQUESTS
> [    19.287] (II) Initializing built-in extension SYNC
> [    19.287] (II) Initializing built-in extension XKEYBOARD
> [    19.287] (II) Initializing built-in extension XC-MISC
> [    19.287] (II) Initializing built-in extension SECURITY
> [    19.287] (II) Initializing built-in extension XINERAMA
> [    19.287] (II) Initializing built-in extension XFIXES
> [    19.287] (II) Initializing built-in extension RENDER
> [    19.287] (II) Initializing built-in extension RANDR
> [    19.287] (II) Initializing built-in extension COMPOSITE
> [    19.287] (II) Initializing built-in extension DAMAGE
> [    19.421] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
> [    19.421] (II) AIGLX: enabled GLX_INTEL_swap_event
> [    19.421] (II) AIGLX: enabled GLX_SGI_make_current_read
> [    19.421] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
> [    19.422] (II) AIGLX: Loaded and initialized i915
> [    19.422] (II) GLX: Initialized DRI2 GL provider for screen 0
> [    19.424] (II) intel(0): Setting screen physical size to 361 x 203
> [    20.016] (II) config/wscons: checking input device /dev/wskbd
> [    20.016] (II) wskbd: using layout us
> [    20.016] (II) LoadModule: "kbd"
> [    20.018] (II) Loading /usr/X11R6/lib/modules/input/kbd_drv.so
> [    20.020] (II) Module kbd: vendor="X.Org Foundation"
> [    20.020]    compiled for 1.12.3, module version = 1.6.2
> [    20.020]    Module class: X.Org XInput Driver
> [    20.020]    ABI class: X.Org XInput driver, version 16.0
> [    20.020] (II) Using input driver 'kbd' for '/dev/wskbd'
> [    20.021] (**) /dev/wskbd: always reports core events
> [    20.021] (**) /dev/wskbd: always reports core events
> [    20.021] (**) Option "Protocol" "standard"
> [    20.021] (**) Option "XkbRules" "base"
> [    20.021] (**) Option "XkbModel" "pc105"
> [    20.021] (**) Option "XkbLayout" "us"
> [    20.021] (II) XINPUT: Adding extended input device "/dev/wskbd" (type: KEYBOARD, id 6)
> [    20.060] (II) config/wscons: checking input device /dev/wsmouse0
> [    20.060] (II) LoadModule: "ws"
> [    20.062] (II) Loading /usr/X11R6/lib/modules/input/ws_drv.so
> [    20.064] (II) Module ws: vendor="X.Org Foundation"
> [    20.064]    compiled for 1.12.3, module version = 1.3.0
> [    20.064]    Module class: X.Org XInput Driver
> [    20.064]    ABI class: X.Org XInput driver, version 16.0
> [    20.064] (II) Using input driver 'ws' for '/dev/wsmouse0'
> [    20.064] (**) /dev/wsmouse0: always reports core events
> [    20.065] (II) ws: /dev/wsmouse0: debuglevel 0
> [    20.065] (**) Option "Device" "/dev/wsmouse0"
> [    20.065] (**) ws: /dev/wsmouse0: ZAxisMapping: buttons 4 and 5
> [    20.065] (**) ws: /dev/wsmouse0: WAxisMapping: buttons 6 and 7
> [    20.065] (**) ws: /dev/wsmouse0: associated screen: 0
> [    20.065] (**) ws: /dev/wsmouse0: device will work in raw mode
> [    20.065] (II) ws: /dev/wsmouse0: minimum x position: 0
> [    20.065] (II) ws: /dev/wsmouse0: maximum x position: 4095
> [    20.065] (II) ws: /dev/wsmouse0: minimum y position: 0
> [    20.065] (II) ws: /dev/wsmouse0: maximum y position: 4095
> [    20.065] (==) ws: /dev/wsmouse0: Buttons: 7
> [    20.100] (**) ws: /dev/wsmouse0: YAxisMapping: buttons 4 and 5
> [    20.100] (II) XINPUT: Adding extended input device "/dev/wsmouse0" (type: TOUCHSCREEN, id 7)
> [    20.100] (**) /dev/wsmouse0: (accel) keeping acceleration scheme 1
> [    20.100] (**) /dev/wsmouse0: (accel) acceleration profile 0
> [    20.100] (**) /dev/wsmouse0: (accel) acceleration factor: 2.000
> [    20.100] (**) /dev/wsmouse0: (accel) acceleration threshold: 4
> [    20.101] (II) config/wscons: checking input device /dev/wsmouse1
> [    20.101] (II) Using input driver 'ws' for '/dev/wsmouse1'
> [    20.101] (**) /dev/wsmouse1: always reports core events
> [    20.101] (II) ws: /dev/wsmouse1: debuglevel 0
> [    20.101] (**) Option "Device" "/dev/wsmouse1"
> [    20.101] (**) ws: /dev/wsmouse1: ZAxisMapping: buttons 4 and 5
> [    20.101] (**) ws: /dev/wsmouse1: WAxisMapping: buttons 6 and 7
> [    20.101] (**) ws: /dev/wsmouse1: associated screen: 0
> [    20.101] (**) ws: /dev/wsmouse1: device will work in raw mode
> [    20.101] (II) ws: /dev/wsmouse1: minimum x position: 0
> [    20.101] (II) ws: /dev/wsmouse1: maximum x position: 32767
> [    20.101] (II) ws: /dev/wsmouse1: minimum y position: 0
> [    20.101] (II) ws: /dev/wsmouse1: maximum y position: 32767
> [    20.101] (==) ws: /dev/wsmouse1: Buttons: 7
> [    20.101] (**) ws: /dev/wsmouse1: YAxisMapping: buttons 4 and 5
> [    20.101] (II) XINPUT: Adding extended input device "/dev/wsmouse1" (type: TOUCHSCREEN, id 8)
> [    20.102] (**) /dev/wsmouse1: (accel) keeping acceleration scheme 1
> [    20.102] (**) /dev/wsmouse1: (accel) acceleration profile 0
> [    20.102] (**) /dev/wsmouse1: (accel) acceleration factor: 2.000
> [    20.102] (**) /dev/wsmouse1: (accel) acceleration threshold: 4
> [    20.140] (II) config/wscons: checking input device /dev/wsmouse
> [    20.140] (II) Using input driver 'ws' for '/dev/wsmouse'
> [    20.140] (**) /dev/wsmouse: always reports core events
> [    20.140] (II) ws: /dev/wsmouse: debuglevel 0
> [    20.140] (**) Option "Device" "/dev/wsmouse"
> [    20.140] (**) ws: /dev/wsmouse: ZAxisMapping: buttons 4 and 5
> [    20.140] (**) ws: /dev/wsmouse: WAxisMapping: buttons 6 and 7
> [    20.140] (**) ws: /dev/wsmouse: associated screen: 0
> [    20.140] (II) ws: /dev/wsmouse: minimum x position: 0
> [    20.140] (II) ws: /dev/wsmouse: maximum x position: 1365
> [    20.140] (II) ws: /dev/wsmouse: minimum y position: 0
> [    20.140] (II) ws: /dev/wsmouse: maximum y position: 767
> [    20.140] (==) ws: /dev/wsmouse: Buttons: 7
> [    20.180] (**) ws: /dev/wsmouse: YAxisMapping: buttons 4 and 5
> [    20.180] (II) XINPUT: Adding extended input device "/dev/wsmouse" (type: MOUSE, id 9)
> [    20.180] (**) /dev/wsmouse: (accel) keeping acceleration scheme 1
> [    20.180] (**) /dev/wsmouse: (accel) acceleration profile 0
> [    20.180] (**) /dev/wsmouse: (accel) acceleration factor: 2.000
> [    20.180] (**) /dev/wsmouse: (accel) acceleration threshold: 4

Reply | Threaded
Open this post in threaded view
|

Re: eGalax touchscreen for Exopc

Brett Mahar-2
On Mon, 5 Nov 2012 05:39:00 +0100
Tomas Bodzar <[hidden email]> wrote:

> Can you post pcidump -v for vga as well? Curious why dmesg shows not
> configured (as Pineview devices are supported in system) and X is able
> to choose driver. Maybe some different revision of device or something
> like that.

These devices don't have a VGA output, only a mini-hdmi. Anyway, below is pcidump -v.

I don't know much about X except that I usually end up with a headache when dealing with it. Could it be the touchscreen inputs are being fed to "pipe A" below, and that is why the mouse cursor is not responding to my finger?


[    19.280] (II) intel(0):   Pipe A is off
[    19.280] (II) intel(0):   Display plane A is now disabled and connected to pipe A.
[    19.280] (II) intel(0):   Pipe B is on
[    19.280] (II) intel(0):   Display plane B is now enabled and connected to pipe B.
[    19.280] (II) intel(0):   Output VGA is connected to pipe none
[    19.280] (II) intel(0):   Output LVDS is connected to pipe B



Domain /dev/pci0:
 0:0:0: Intel Pineview DMI
        0x0000: Vendor ID: 8086 Product ID: a010
        0x0004: Command: 0006 Status ID: 2090
        0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 00
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1b0a Product ID: 00c7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
        0x00e0: Capability 0x09: Vendor Specific
 0:2:0: Intel Pineview Video
        0x0000: Vendor ID: 8086 Product ID: a011
        0x0004: Command: 0007 Status ID: 0090
        0x0008: Class: 03 Subclass: 00 Interface: 00 Revision: 00
        0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR mem 32bit addr: 0xfe380000/0x00080000
        0x0014: BAR io addr: 0x0000f170/0x0008
        0x0018: BAR mem prefetchable 32bit addr: 0xe0000000/0x10000000
        0x001c: BAR mem 32bit addr: 0xfe100000/0x00100000
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1b0a Product ID: 00c7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
        0x0090: Capability 0x05: Message Signaled Interrupts (MSI)
        0x00d0: Capability 0x01: Power Management
 0:2:1: Intel Pineview Video
        0x0000: Vendor ID: 8086 Product ID: a012
        0x0004: Command: 0007 Status ID: 0090
        0x0008: Class: 03 Subclass: 80 Interface: 00 Revision: 00
        0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR mem 32bit addr: 0xfe300000/0x00080000
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1b0a Product ID: 00c7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
        0x00d0: Capability 0x01: Power Management
 0:26:0: Intel 82801H USB
        0x0000: Vendor ID: 8086 Product ID: 2834
        0x0004: Command: 0005 Status ID: 0280
        0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 04
        0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR io addr: 0x0000f0a0/0x0020
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1b0a Product ID: 00c7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
 0:26:1: Intel 82801H USB
        0x0000: Vendor ID: 8086 Product ID: 2835
        0x0004: Command: 0005 Status ID: 0280
        0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 04
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR io addr: 0x0000f080/0x0020
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1b0a Product ID: 00c7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 02 Line: 0a Min Gnt: 00 Max Lat: 00
 0:26:7: Intel 82801H USB
        0x0000: Vendor ID: 8086 Product ID: 283a
        0x0004: Command: 0006 Status ID: 0290
        0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 04
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR mem 32bit addr: 0xfe406000/0x00000400
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 8086 Product ID: 283a
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 03 Line: 05 Min Gnt: 00 Max Lat: 00
        0x0050: Capability 0x01: Power Management
        0x0058: Capability 0x0a: Debug Port
 0:27:0: Intel 82801H HD Audio
        0x0000: Vendor ID: 8086 Product ID: 284b
        0x0004: Command: 0006 Status ID: 0010
        0x0008: Class: 04 Subclass: 03 Interface: 00 Revision: 04
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
        0x0010: BAR mem 64bit addr: 0x00000000fe400000/0x00004000
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1b0a Product ID: 00c7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 00 Max Lat: 00
        0x0050: Capability 0x01: Power Management
        0x0060: Capability 0x05: Message Signaled Interrupts (MSI)
        0x0070: Capability 0x10: PCI Express
 0:28:0: Intel 82801H PCIE
        0x0000: Vendor ID: 8086 Product ID: 283f
        0x0004: Command: 0007 Status ID: 0010
        0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 04
        0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
        0x0010: 00000000
        0x0014: 00000000
        0x0018: Primary Bus: 0 Secondary Bus: 1 Subordinate Bus: 1
                Secondary Latency Timer: 00
        0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 0000
        0x0020: Memory Base: fe20 Memory Limit: fe20
        0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
        0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
        0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
        0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
        0x0038: Expansion ROM Base Address: 00000000
        0x003c: Interrupt Pin: 01 Line: 03 Bridge Control: 0010
        0x0040: Capability 0x10: PCI Express
                Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1
        0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
        0x0090: Capability 0x0d: PCI-PCI
        0x00a0: Capability 0x01: Power Management
 0:28:2: Intel 82801H PCIE
        0x0000: Vendor ID: 8086 Product ID: 2843
        0x0004: Command: 0007 Status ID: 0010
        0x0008: Class: 06 Subclass: 04 Interface: 00 Revision: 04
        0x000c: BIST: 00 Header Type: 81 Latency Timer: 00 Cache Line Size: 10
        0x0010: 00000000
        0x0014: 00000000
        0x0018: Primary Bus: 0 Secondary Bus: 2 Subordinate Bus: 2
                Secondary Latency Timer: 00
        0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 0000
        0x0020: Memory Base: fd80 Memory Limit: fe00
        0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
        0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
        0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
        0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
        0x0038: Expansion ROM Base Address: 00000000
        0x003c: Interrupt Pin: 03 Line: 07 Bridge Control: 0010
        0x0040: Capability 0x10: PCI Express
                Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1
        0x0080: Capability 0x05: Message Signaled Interrupts (MSI)
        0x0090: Capability 0x0d: PCI-PCI
        0x00a0: Capability 0x01: Power Management
 0:29:0: Intel 82801H USB
        0x0000: Vendor ID: 8086 Product ID: 2830
        0x0004: Command: 0005 Status ID: 0280
        0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 04
        0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR io addr: 0x0000f060/0x0020
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1b0a Product ID: 00c7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 04 Min Gnt: 00 Max Lat: 00
 0:29:1: Intel 82801H USB
        0x0000: Vendor ID: 8086 Product ID: 2831
        0x0004: Command: 0005 Status ID: 0280
        0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 04
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR io addr: 0x0000f040/0x0020
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1b0a Product ID: 00c7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 02 Line: 0b Min Gnt: 00 Max Lat: 00
 0:29:2: Intel 82801H USB
        0x0000: Vendor ID: 8086 Product ID: 2832
        0x0004: Command: 0005 Status ID: 0280
        0x0008: Class: 0c Subclass: 03 Interface: 00 Revision: 04
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR io addr: 0x0000f020/0x0020
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1b0a Product ID: 00c7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 03 Line: 05 Min Gnt: 00 Max Lat: 00
 0:29:7: Intel 82801H USB
        0x0000: Vendor ID: 8086 Product ID: 2836
        0x0004: Command: 0006 Status ID: 0290
        0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 04
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR mem 32bit addr: 0xfe405000/0x00000400
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 8086 Product ID: 2836
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 04 Min Gnt: 00 Max Lat: 00
        0x0050: Capability 0x01: Power Management
        0x0058: Capability 0x0a: Debug Port
 0:30:0: Intel 82801BAM Hub-to-PCI
        0x0000: Vendor ID: 8086 Product ID: 2448
        0x0004: Command: 0007 Status ID: 0010
        0x0008: Class: 06 Subclass: 04 Interface: 01 Revision: f4
        0x000c: BIST: 00 Header Type: 01 Latency Timer: 00 Cache Line Size: 00
        0x0010: 00000000
        0x0014: 00000000
        0x0018: Primary Bus: 0 Secondary Bus: 3 Subordinate Bus: 3
                Secondary Latency Timer: 20
        0x001c: I/O Base: f0 I/O Limit: 00 Secondary Status: 2280
        0x0020: Memory Base: fff0 Memory Limit: 0000
        0x0024: Prefetch Memory Base: fff1 Prefetch Memory Limit: 0001
        0x0028: Prefetch Memory Base Upper 32 Bits: 00000000
        0x002c: Prefetch Memory Limit Upper 32 Bits: 00000000
        0x0030: I/O Base Upper 16 Bits: 0000 I/O Limit Upper 16 Bits: 0000
        0x0038: Expansion ROM Base Address: 00000000
        0x003c: Interrupt Pin: 00 Line: ff Bridge Control: 0010
        0x0050: Capability 0x0d: PCI-PCI
 0:31:0: Intel 82801HBM LPC
        0x0000: Vendor ID: 8086 Product ID: 2815
        0x0004: Command: 0007 Status ID: 0210
        0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 04
        0x000c: BIST: 00 Header Type: 80 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1b0a Product ID: 00c7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
        0x00e0: Capability 0x09: Vendor Specific
 0:31:1: Intel 82801HBM IDE
        0x0000: Vendor ID: 8086 Product ID: 2850
        0x0004: Command: 0005 Status ID: 0288
        0x0008: Class: 01 Subclass: 01 Interface: 8a Revision: 04
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR io addr: 0x0000f160/0x0008
        0x0014: BAR io addr: 0x0000f150/0x0004
        0x0018: BAR io addr: 0x0000f140/0x0008
        0x001c: BAR io addr: 0x0000f130/0x0004
        0x0020: BAR io addr: 0x0000f120/0x0010
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1b0a Product ID: 00c7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
 0:31:2: Intel 82801HBM SATA
        0x0000: Vendor ID: 8086 Product ID: 2828
        0x0004: Command: 0007 Status ID: 02b0
        0x0008: Class: 01 Subclass: 01 Interface: 8f Revision: 04
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR io addr: 0x0000f110/0x0008
        0x0014: BAR io addr: 0x0000f100/0x0004
        0x0018: BAR io addr: 0x0000f0f0/0x0008
        0x001c: BAR io addr: 0x0000f0e0/0x0004
        0x0020: BAR io addr: 0x0000f0d0/0x0010
        0x0024: BAR io addr: 0x0000f0c0/0x0010
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1b0a Product ID: 00c7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 02 Line: 05 Min Gnt: 00 Max Lat: 00
        0x0070: Capability 0x01: Power Management
 0:31:3: Intel 82801H SMBus
        0x0000: Vendor ID: 8086 Product ID: 283e
        0x0004: Command: 0003 Status ID: 0280
        0x0008: Class: 0c Subclass: 05 Interface: 00 Revision: 04
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 00
        0x0010: BAR mem 32bit addr: 0xfe404000/0x00000100
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR io addr: 0x0000f000/0x0020
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1b0a Product ID: 00c7
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 03 Line: 05 Min Gnt: 00 Max Lat: 00
 1:0:0: Atheros AR9285
        0x0000: Vendor ID: 168c Product ID: 002b
        0x0004: Command: 0007 Status ID: 0010
        0x0008: Class: 02 Subclass: 80 Interface: 00 Revision: 01
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
        0x0010: BAR mem 64bit addr: 0x00000000fe200000/0x00010000
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1a3b Product ID: 2c37
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 0b Min Gnt: 00 Max Lat: 00
        0x0040: Capability 0x01: Power Management
        0x0050: Capability 0x05: Message Signaled Interrupts (MSI)
        0x0060: Capability 0x10: PCI Express
                Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1
 2:0:0: Broadcom unknown
        0x0000: Vendor ID: 14e4 Product ID: 1615
        0x0004: Command: 0006 Status ID: 0010
        0x0008: Class: 04 Subclass: 80 Interface: 00 Revision: 00
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 10
        0x0010: BAR mem 64bit addr: 0x00000000fe000000/0x00010000
        0x0018: BAR mem 64bit addr: 0x00000000fd800000/0x00800000
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 14e4 Product ID: 1615
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 05 Min Gnt: 00 Max Lat: 00
        0x0048: Capability 0x01: Power Management
        0x0060: Capability 0x09: Vendor Specific
        0x0050: Capability 0x05: Message Signaled Interrupts (MSI)
        0x00cc: Capability 0x10: PCI Express
                Link Speed: 2.5 / 2.5 GT/s Link Width: x1 / x1