doxygen fails to compile on lemote yeeloong

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

doxygen fails to compile on lemote yeeloong

Bryan Irvine
I"m trying to compile gpsd and doxygen fails to compile (I think gimp
needs this one too).

The lines leading up to the failure are:
../lib/libdoxygen.a(language.o)(.text+0x2c): In function
`setTranslator(char const*)':
: relocation truncated to fit: R_MIPS_CALL16 qstricmp(char const*, char const*)
../lib/libdoxygen.a(language.o)(.text+0x44): In function
`setTranslator(char const*)':
: relocation truncated to fit: R_MIPS_CALL16 operator new(unsigned long)
../lib/libdoxygen.a(language.o)(.text+0x50): In function
`setTranslator(char const*)':
: relocation truncated to fit: R_MIPS_GOT_DISP vtable for TranslatorEnglish
../lib/libdoxygen.a(language.o)(.text+0x5c): In function
`setTranslator(char const*)':
: relocation truncated to fit: R_MIPS_GOT_DISP theTranslator
../lib/libdoxygen.a(language.o)(.text+0x64): In function
`setTranslator(char const*)':
: relocation truncated to fit: R_MIPS_GOT_DISP theTranslator
../lib/libdoxygen.a(language.o)(.text+0x98): In function
`setTranslator(char const*)':
: relocation truncated to fit: R_MIPS_CALL16 QCString::~QCString()
../lib/libdoxygen.a(language.o)(.text+0xcc): In function
`setTranslator(char const*)':
: relocation truncated to fit: R_MIPS_CALL16 qstricmp(char const*, char const*)
../lib/libdoxygen.a(language.o)(.text+0xe4): In function
`setTranslator(char const*)':
: relocation truncated to fit: R_MIPS_CALL16 operator new(unsigned long)
../lib/libdoxygen.a(language.o)(.text+0xf0): In function
`setTranslator(char const*)':
: relocation truncated to fit: R_MIPS_GOT_DISP vtable for TranslatorDutch
../lib/libdoxygen.a(language.o)(.text+0xfc): In function
`setTranslator(char const*)':
: relocation truncated to fit: R_MIPS_GOT_DISP theTranslator
../lib/libdoxygen.a(language.o)(.text+0x10c): In function
`setTranslator(char const*)':
: additional relocation overflows omitted from the output
collect2: ld returned 1 exit status
gmake[2]: *** [../bin/doxygen] Error 1
gmake[2]: Leaving directory
`/home/ports/pobj/doxygen-1.7.2.src/doxygen-1.7.2/src'
gmake[1]: *** [all] Error 2
gmake[1]: Leaving directory
`/home/ports/pobj/doxygen-1.7.2.src/doxygen-1.7.2/src'
gmake: *** [all] Error 2
*** Error code 2

Stop in /home/ports/devel/doxygen (line 2494 of
/usr/ports/infrastructure/mk/bsd.port.mk).
*** Error code 1

Stop in /home/ports/devel/doxygen (line 2250 of
/usr/ports/infrastructure/mk/bsd.port.mk).


dmesg:

[ using 463944 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2011 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.0 (GENERIC) #26: Wed Aug 17 10:41:08 MDT 2011
    [hidden email]:/usr/src/sys/arch/loongson/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1059209216 (1010MB)
mainbus0 at root: Lemote Yeeloong
cpu0 at mainbus0: STC Loongson2F CPU 797 MHz, STC Loongson2F FPU
cpu0: cache L1-I 64KB D 64KB 4 way, L2 512KB 4 way
bonito0 at mainbus0: memory and PCI-X controller, rev 1
pci0 at bonito0 bus 0
rl0 at pci0 dev 7 function 0 "Realtek 8139" rev 0x10: irq 5, address
00:23:8b:84:6f:40
rlphy0 at rl0 phy 0: RTL internal PHY
smfb0 at pci0 dev 8 function 0 "Silicon Motion LynxEM+" rev 0xb0
wsdisplay0 at smfb0 mux 1: console (std, vt100 emulation)
ohci0 at pci0 dev 9 function 0 "NEC USB" rev 0x44: irq 7, version 1.0
ehci0 at pci0 dev 9 function 1 "NEC USB" rev 0x05: irq 7
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
glxpcib0 at pci0 dev 14 function 0 "AMD CS5536 ISA" rev 0x03: rev 3,
32-bit 3579545Hz timer, watchdog, gpio
gpio1 at glxpcib0: 32 pins
pciide0 at pci0 dev 14 function 2 "AMD CS5536 IDE" rev 0x01: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <FUJITSU MHZ2160BH G2>
wd0: 16-sector PIO, LBA48, 152627MB, 312581808 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
auglx0 at pci0 dev 14 function 3 "AMD CS5536 Audio" rev 0x01: isa irq
9, CS5536 AC97
ac97: codec id 0x414c4760 (Avance Logic ALC655 rev 0)
audio0 at auglx0
ohci1 at pci0 dev 14 function 4 "AMD CS5536 USB" rev 0x02: isa irq 11,
version 1.0, legacy support
ehci1 at pci0 dev 14 function 5 "AMD CS5536 USB" rev 0x02: isa irq 11
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "AMD EHCI root hub" rev 2.00/1.00 addr 1
usb2 at ohci0: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
isa0 at glxpcib0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
mcclock0 at isa0 port 0x70/2: mc146818 or compatible
ykbec0 at isa0 port 0x381/3
usb3 at ohci1: USB revision 1.0
uhub3 at usb3 "AMD OHCI root hub" rev 1.00/1.00 addr 1
clock0 at mainbus0: ticker on int5 using count register
apm0 at mainbus0
umass0 at uhub1 port 1 configuration 1 interface 0 "Generic
USB2.0-CRW" rev 2.00/58.87 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Generic-, Multi-Card, 1.00> SCSI0
0/direct removable serial.0bda0158114173400000
urtw0 at uhub1 port 4 "Realtek RTL8187B" rev 2.00/2.00 addr 3
urtw0: RTL8187B rev E, address 00:17:c4:5a:08:1a
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
pmon bootpath: /dev/disk/wd0
boot device: wd0
root on wd0a swap on wd0b dump on wd0b
WARNING: / was not properly unmounted
ehci_idone: ex=0xc000000000088200 is done!
ehci_idone: ex=0xc000000000088200 is done!
apm0: battery high
urtw1 at uhub1 port 2 "Realtek RTL8187" rev 2.00/1.00 addr 4
urtw1: RTL8187 rev 0x04, RFv2, address 00:c0:ca:1b:c8:fb

Reply | Threaded
Open this post in threaded view
|

Re: doxygen fails to compile on lemote yeeloong

Bryan Irvine
On Tue, Jan 17, 2012 at 7:36 PM, Bryan Irvine <[hidden email]> wrote:
> I"m trying to compile gpsd and doxygen fails to compile (I think gimp
> needs this one too).

update.

I added --english-only to the configure args for doxygen and it
compiled and installed just fine.  I did attempt to adjust ulimits to
insane values first with no change.  Any ideas on a better fix?

-Bryan

Reply | Threaded
Open this post in threaded view
|

Re: doxygen fails to compile on lemote yeeloong

wenheping
2012/1/26 Bryan Irvine <[hidden email]>

> On Tue, Jan 17, 2012 at 7:36 PM, Bryan Irvine <[hidden email]>
> wrote:
> > I"m trying to compile gpsd and doxygen fails to compile (I think gimp
> > needs this one too).
>
> update.
>
> I added --english-only to the configure args for doxygen and it
> compiled and installed just fine.  I did attempt to adjust ulimits to
>

I met this problem too. Thank you.

wen




> insane values first with no change.  Any ideas on a better fix?
>
> -Bryan
>
>