dmesg for edgerouter 6p

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

dmesg for edgerouter 6p

Holger Glaess
hi

i upgrade from an native 6.4 beta installation , no problems at all.


/ 29>dmesg
Copyright (c) 1982, 1986, 1989, 1991, 1993
         The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2018 OpenBSD. All rights reserved.
https://www.OpenBSD.org

OpenBSD 6.4 (GENERIC.MP) #0: Sat Oct 13 03:52:37 UTC 2018
     visa@octeon:/usr/src/sys/arch/octeon/compile/GENERIC.MP
real mem = 1073741824 (1024MB)
avail mem = 1038041088 (989MB)
mainbus0 at root: board 20300 rev 1.20
cpu0 at mainbus0: CN70xx/CN71xx CPU rev 0.2 1000 MHz, CN70xx/CN71xx FPU
rev 0.0
cpu0: cache L1-I 78KB 39 way D 32KB 32 way, L2 1024KB 8 way
cpu1 at mainbus0: CN70xx/CN71xx CPU rev 0.2 1000 MHz, CN70xx/CN71xx FPU
rev 0.0
cpu1: cache L1-I 78KB 39 way D 32KB 32 way, L2 1024KB 8 way
cpu2 at mainbus0: CN70xx/CN71xx CPU rev 0.2 1000 MHz, CN70xx/CN71xx FPU
rev 0.0
cpu2: cache L1-I 78KB 39 way D 32KB 32 way, L2 1024KB 8 way
cpu3 at mainbus0: CN70xx/CN71xx CPU rev 0.2 1000 MHz, CN70xx/CN71xx FPU
rev 0.0
cpu3: cache L1-I 78KB 39 way D 32KB 32 way, L2 1024KB 8 way
clock0 at mainbus0: int 5
octcrypto0 at mainbus0
iobus0 at mainbus0
simplebus0 at iobus0: "soc"
octciu0 at simplebus0
octcib0 at simplebus0: max-bits 23
octcib1 at simplebus0: max-bits 12
octcib2 at simplebus0: max-bits 6
octcib3 at simplebus0: max-bits 15
octcib4 at simplebus0: max-bits 4
octcib5 at simplebus0: max-bits 11
octcib6 at simplebus0: max-bits 11
cn30xxsmi0 at simplebus0
octxctl0 at simplebus0: DWC3 rev 0x250a
xhci0 at octxctl0, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev
3.00/1.00 addr 1
octxctl1 at simplebus0: DWC3 rev 0x250a
xhci1 at octxctl1, xHCI 1.0
usb1 at xhci1: USB revision 3.0
uhub1 at usb1 configuration 1 interface 0 "Generic xHCI root hub" rev
3.00/1.00 addr 1
com0 at simplebus0: ns16550a, 64 byte fifo
com0: console
com1 at simplebus0: ns16550a, 64 byte fifo
com1: probed fifo depth: 0 bytes
octmmc0 at simplebus0
sdmmc0 at octmmc0: 8-bit, mmc high-speed
sdmmc1 at octmmc0: 8-bit, mmc high-speed
octrng0 at iobus0 base 0x1400000000000 irq 0
cn30xxgmx0 at iobus0 base 0x1180008000000
cnmac0 at cn30xxgmx0: SGMII, address fc:ec:da:40:fa:42
ukphy0 at cnmac0 phy 4: Generic IEEE 802.3u media interface, rev. 2: OUI
0x0001c1, model 0x000c
cnmac1 at cn30xxgmx0: SGMII, address fc:ec:da:40:fa:43
ukphy1 at cnmac1 phy 5: Generic IEEE 802.3u media interface, rev. 2: OUI
0x0001c1, model 0x000c
cnmac2 at cn30xxgmx0: SGMII, address fc:ec:da:40:fa:44
ukphy2 at cnmac2 phy 6: Generic IEEE 802.3u media interface, rev. 2: OUI
0x0001c1, model 0x000c
cnmac3 at cn30xxgmx0: SGMII, address fc:ec:da:40:fa:45
ukphy3 at cnmac3 phy 7: Generic IEEE 802.3u media interface, rev. 2: OUI
0x0001c1, model 0x000c
cn30xxgmx1 at iobus0 base 0x1180010000000
cnmac4 at cn30xxgmx1: SGMII, address fc:ec:da:40:fa:46
ukphy4 at cnmac4 phy 8: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0001c1, model 0x0027
cnmac5 at cn30xxgmx1: SGMII, address fc:ec:da:40:fa:47
ukphy5 at cnmac5 phy 9: Generic IEEE 802.3u media interface, rev. 0: OUI
0x0001c1, model 0x0027
/dev/ksyms: Symbol table not valid.
umass0 at uhub0 port 2 configuration 1 interface 0 "Generic USB3.0 Card
Reader" rev 3.00/15.32 addr 2
umass0: using SCSI over Bulk-Only
scsibus0 at umass0: 2 targets, initiator 0
sd0 at scsibus0 targ 1 lun 0: <Generic, STORAGE DEVICE, 1532> SCSI4
0/direct removable serial.05e30749000000001532
sd0: 61056MB, 512 bytes/sector, 125042688 sectors
sdmmc1: can't enable card
scsibus1 at sdmmc0: 2 targets, initiator 0
sd1 at scsibus1 targ 1 lun 0: <Sandisk, SEM04G, 0000> SCSI2 0/direct
removable
sd1: 3776MB, 512 bytes/sector, 7733248 sectors
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
boot device: sd0
root on sd0a (1e8c6ddb499f7a0a.a) swap on sd0b dump on sd0b
WARNING: No TOD clock, believing file system.
WARNING: CHECK AND RESET THE DATE!
20:25:13 Mon Aug 20


holger


Reply | Threaded
Open this post in threaded view
|

Re: dmesg for edgerouter 6p

Abel Abraham Camarillo Ojeda-2
On Tue, Oct 23, 2018 at 4:24 PM Holger Glaess <[hidden email]> wrote:

> hi
>
> i upgrade from an native 6.4 beta installation , no problems at all.
>
>
> / 29>dmesg
> Copyright (c) 1982, 1986, 1989, 1991, 1993
>          The Regents of the University of California.  All rights reserved.
> Copyright (c) 1995-2018 OpenBSD. All rights reserved.
> https://www.OpenBSD.org
>
> OpenBSD 6.4 (GENERIC.MP) #0: Sat Oct 13 03:52:37 UTC 2018
>      visa@octeon:/usr/src/sys/arch/octeon/compile/GENERIC.MP
> real mem = 1073741824 (1024MB)
> avail mem = 1038041088 (989MB)
> mainbus0 at root: board 20300 rev 1.20
> cpu0 at mainbus0: CN70xx/CN71xx CPU rev 0.2 1000 MHz, CN70xx/CN71xx FPU
> rev 0.0
> cpu0: cache L1-I 78KB 39 way D 32KB 32 way, L2 1024KB 8 way
> cpu1 at mainbus0: CN70xx/CN71xx CPU rev 0.2 1000 MHz, CN70xx/CN71xx FPU
> rev 0.0
> cpu1: cache L1-I 78KB 39 way D 32KB 32 way, L2 1024KB 8 way
> cpu2 at mainbus0: CN70xx/CN71xx CPU rev 0.2 1000 MHz, CN70xx/CN71xx FPU
> rev 0.0
> cpu2: cache L1-I 78KB 39 way D 32KB 32 way, L2 1024KB 8 way
> cpu3 at mainbus0: CN70xx/CN71xx CPU rev 0.2 1000 MHz, CN70xx/CN71xx FPU
> rev 0.0
> cpu3: cache L1-I 78KB 39 way D 32KB 32 way, L2 1024KB 8 way
> clock0 at mainbus0: int 5
> octcrypto0 at mainbus0
> iobus0 at mainbus0
> simplebus0 at iobus0: "soc"
> octciu0 at simplebus0
> octcib0 at simplebus0: max-bits 23
> octcib1 at simplebus0: max-bits 12
> octcib2 at simplebus0: max-bits 6
> octcib3 at simplebus0: max-bits 15
> octcib4 at simplebus0: max-bits 4
> octcib5 at simplebus0: max-bits 11
> octcib6 at simplebus0: max-bits 11
> cn30xxsmi0 at simplebus0
> octxctl0 at simplebus0: DWC3 rev 0x250a
> xhci0 at octxctl0, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Generic xHCI root hub" rev
> 3.00/1.00 addr 1
> octxctl1 at simplebus0: DWC3 rev 0x250a
> xhci1 at octxctl1, xHCI 1.0
> usb1 at xhci1: USB revision 3.0
> uhub1 at usb1 configuration 1 interface 0 "Generic xHCI root hub" rev
> 3.00/1.00 addr 1
> com0 at simplebus0: ns16550a, 64 byte fifo
> com0: console
> com1 at simplebus0: ns16550a, 64 byte fifo
> com1: probed fifo depth: 0 bytes
> octmmc0 at simplebus0
> sdmmc0 at octmmc0: 8-bit, mmc high-speed
> sdmmc1 at octmmc0: 8-bit, mmc high-speed
> octrng0 at iobus0 base 0x1400000000000 irq 0
> cn30xxgmx0 at iobus0 base 0x1180008000000
> cnmac0 at cn30xxgmx0: SGMII, address fc:ec:da:40:fa:42
> ukphy0 at cnmac0 phy 4: Generic IEEE 802.3u media interface, rev. 2: OUI
> 0x0001c1, model 0x000c
> cnmac1 at cn30xxgmx0: SGMII, address fc:ec:da:40:fa:43
> ukphy1 at cnmac1 phy 5: Generic IEEE 802.3u media interface, rev. 2: OUI
> 0x0001c1, model 0x000c
> cnmac2 at cn30xxgmx0: SGMII, address fc:ec:da:40:fa:44
> ukphy2 at cnmac2 phy 6: Generic IEEE 802.3u media interface, rev. 2: OUI
> 0x0001c1, model 0x000c
> cnmac3 at cn30xxgmx0: SGMII, address fc:ec:da:40:fa:45
> ukphy3 at cnmac3 phy 7: Generic IEEE 802.3u media interface, rev. 2: OUI
> 0x0001c1, model 0x000c
> cn30xxgmx1 at iobus0 base 0x1180010000000
> cnmac4 at cn30xxgmx1: SGMII, address fc:ec:da:40:fa:46
> ukphy4 at cnmac4 phy 8: Generic IEEE 802.3u media interface, rev. 0: OUI
> 0x0001c1, model 0x0027
> cnmac5 at cn30xxgmx1: SGMII, address fc:ec:da:40:fa:47
> ukphy5 at cnmac5 phy 9: Generic IEEE 802.3u media interface, rev. 0: OUI
> 0x0001c1, model 0x0027
>

Do the six ports work?

Thanks


> /dev/ksyms: Symbol table not valid.
> umass0 at uhub0 port 2 configuration 1 interface 0 "Generic USB3.0 Card
> Reader" rev 3.00/15.32 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus0 at umass0: 2 targets, initiator 0
> sd0 at scsibus0 targ 1 lun 0: <Generic, STORAGE DEVICE, 1532> SCSI4
> 0/direct removable serial.05e30749000000001532
> sd0: 61056MB, 512 bytes/sector, 125042688 sectors
> sdmmc1: can't enable card
> scsibus1 at sdmmc0: 2 targets, initiator 0
> sd1 at scsibus1 targ 1 lun 0: <Sandisk, SEM04G, 0000> SCSI2 0/direct
> removable
> sd1: 3776MB, 512 bytes/sector, 7733248 sectors
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> boot device: sd0
> root on sd0a (1e8c6ddb499f7a0a.a) swap on sd0b dump on sd0b
> WARNING: No TOD clock, believing file system.
> WARNING: CHECK AND RESET THE DATE!
> 20:25:13 Mon Aug 20
>
>
> holger
>
>
>
Reply | Threaded
Open this post in threaded view
|

Re: dmesg for edgerouter 6p

Philip Guenther-2
In reply to this post by Holger Glaess
On Tue, Oct 23, 2018 at 12:14 PM Holger Glaess <[hidden email]> wrote:

> i upgrade from an native 6.4 beta installation , no problems at all.
>

To quote the email sent to your local 'root' user after install/upgrade:

If you wish to ensure that OpenBSD runs better on your machines, please do
us
a favor (after you have your mail system configured!) and type something
like:
 # (dmesg; sysctl hw.sensors) | \
        mail -s "Sony VAIO 505R laptop, apm works OK" [hidden email]
so that we can see what kinds of configurations people are running.  As
shown,
including a bit of information about your machine in the subject or the body
can help us even further.  We will use this information to improve device
driver
support in future releases.  (Please do this using the supplied GENERIC
kernel,
not for a custom compiled kernel, unless you're unable to boot the GENERIC
kernel.  If you have a multi-processor machine, dmesg results of both
GENERIC.MP
and GENERIC kernels are appreciated.)  The device driver information we get
from
this helps us fix existing drivers. Thank you!