dell universal d6000 dock

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

dell universal d6000 dock

sharon s.
Hi,

I am running current from Jan 21st on a dell latitude 7490 (dmesg below)
and was hoping to get a usb-c dock connected so that I could use 2
display ports, the hdmi, eth and extra usb ports in one easy to
disconnect usb-c connection.

The hdmi seems to work ok but I get the following errors in
/var/log/messages when I plug/unplug a display port.

Feb  5 16:48:56 curry /bsd: uhub1 at uhub0 port 1 configuration 1
interface 0 "GenesysLogic USB2.1 Hub" rev 2.10/88.16 addr 5
Feb  5 16:48:56 curry apmd: battery status: high. external power status:
connected. estimated battery life 95%
Feb  5 16:48:57 curry /bsd: uhub2 at uhub1 port 2 configuration 1
interface 0 "GenesysLogic USB2.1 Hub" rev 2.10/88.17 addr 6
Feb  5 16:48:58 curry /bsd: uhub3 at uhub1 port 3 configuration 1
interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/88.32 addr 7
Feb  5 16:48:59 curry /bsd: uhidev2 at uhub3 port 1 configuration 1
interface 0 "Bizlink D6000 Controller" rev 2.00/0.18 addr 8
Feb  5 16:48:59 curry /bsd: uhidev2: iclass 3/0, 1 report id
Feb  5 16:48:59 curry /bsd: uhid4 at uhidev2 reportid 1: input=0,
output=0, feature=1
Feb  5 16:48:59 curry /bsd: uhub4 at uhub0 port 13 configuration 1
interface 0 "GenesysLogic USB3.1 Hub" rev 3.10/88.16 addr 9
Feb  5 16:49:00 curry /bsd: uaudio0 at uhub4 port 1 configuration 1
interface 2 "DisplayLink Dell Universal Dock D6000" rev 3.10/31.27 addr 10
Feb  5 16:49:00 curry /bsd: uaudio0: audio descriptors make no sense,
error=4
Feb  5 16:49:00 curry /bsd: ugen1 at uhub4 port 1 configuration 1
"DisplayLink Dell Universal Dock D6000" rev 3.10/31.27 addr 10
Feb  5 16:49:01 curry /bsd: uhub5 at uhub4 port 2 configuration 1
interface 0 "GenesysLogic USB3.1 Hub" rev 3.10/88.17 addr 11
Feb  5 16:49:01 curry /bsd: uhub2 detached
Feb  5 16:49:01 curry /bsd: uhid4 detached
Feb  5 16:49:01 curry /bsd: uhidev2 detached
Feb  5 16:49:01 curry /bsd: uhub3 detached
Feb  5 16:49:01 curry /bsd: uhub1 detached
Feb  5 16:49:02 curry /bsd: uhub1 at uhub0 port 1 configuration 1
interface 0 "GenesysLogic USB2.1 Hub" rev 2.10/88.16 addr 5
Feb  5 16:49:03 curry /bsd: uhub2 at uhub1 port 2 configuration 1
interface 0 "GenesysLogic USB2.1 Hub" rev 2.10/88.17 addr 6
Feb  5 16:49:04 curry /bsd: uhub3 at uhub1 port 3 configuration 1
interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/88.32 addr 7
Feb  5 16:49:05 curry /bsd: uhidev2 at uhub3 port 1 configuration 1
interface 0 "Bizlink D6000 Controller" rev 2.00/0.18 addr 8
Feb  5 16:49:05 curry /bsd: uhidev2: iclass 3/0, 1 report id
Feb  5 16:49:05 curry /bsd: uhid4 at uhidev2 reportid 1: input=0,
output=0, feature=1
Feb  5 16:49:53 curry /bsd: umass0 at uhub5 port 2 configuration 1
interface 0 "SanDisk Ultra" rev 3.00/1.00 addr 12
Feb  5 16:49:53 curry /bsd: umass0: using SCSI over Bulk-Only
Feb  5 16:49:53 curry /bsd: scsibus4 at umass0: 2 targets, initiator 0
Feb  5 16:49:53 curry /bsd: sd2 at scsibus4 targ 1 lun 0: <SanDisk,
Ultra, 1.00> SCSI4 0/direct removable serial.07815581200212119554
Feb  5 16:49:53 curry /bsd: sd2: 29328MB, 512 bytes/sector, 60063744 sectors
Feb  5 16:51:59 curry /bsd: error: [drm:pid69604:intel_dp_aux_wait_done]
*ERROR* dp aux hw did not signal timeout (has irq: 1)!
Feb  5 16:54:57 curry /bsd: error:
[drm:pid69604:intel_pipe_update_start] *ERROR* Potential atomic update
failure on pipe B
Feb  5 16:55:56 curry /bsd: WARNING !wm_changed failed at
/usr/src/sys/dev/pci/drm/i915/intel_pm.c:3609
Feb  5 16:56:39 curry /bsd: uhub2 detached
Feb  5 16:56:39 curry /bsd: uhid4 detached
Feb  5 16:56:39 curry /bsd: uhidev2 detached
Feb  5 16:56:39 curry /bsd: uhub3 detached
Feb  5 16:56:39 curry /bsd: uhub1 detached
Feb  5 16:56:39 curry /bsd: uaudio0 detached
Feb  5 16:56:39 curry /bsd: ugen1 detached
Feb  5 16:56:39 curry /bsd: sd2 detached
Feb  5 16:56:39 curry /bsd: scsibus4 detached
Feb  5 16:56:39 curry /bsd: umass0 detached
Feb  5 16:56:39 curry /bsd: uhub5 detached
Feb  5 16:56:39 curry /bsd: uhub4 detached
Feb  5 16:56:40 curry apmd: battery status: high. external power status:
not connected. estimated battery life 95%
Feb  5 17:06:45 curry /bsd: error:
[drm:pid69604:intel_pipe_update_start] *ERROR* Potential atomic update
failure on pipe A

Any thoughts?

I have to return the dock in a couple of days but if there is any
procedures or output that someone would like to see in the meantime, let
me know.

Thanks,

Thomas


OpenBSD 6.4-current (GENERIC.MP) #625: Mon Jan 21 22:20:46 MST 2019
[hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 17037066240 (16247MB)
avail mem = 16511123456 (15746MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 3.1 @ 0xe0000 (109 entries)
bios0: vendor Dell Inc. version "1.7.2" date 11/26/2018
bios0: Dell Inc. Latitude 7490
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT SSDT HPET SSDT
UEFI SSDT LPIT SSDT SSDT SSDT SSDT DBGP DBG2 SSDT SSDT MSDM SLIC NHLT
TPM2 ASF! DMAR BGRT
acpi0: wakeup devices PXSX(S4) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4)
RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) PXSX(S4) RP01(S4) PXSX(S4)
RP02(S4) PXSX(S4) RP03(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1789.37 MHz, 06-8e-0a
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
cpu0: apic clock running at 23MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 4 (application processor)
cpu2: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 0, core 3, package 0
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu4: 256KB 64b/line 8-way L2 cache
cpu4: smt 1, core 0, package 0
cpu5 at mainbus0: apid 3 (application processor)
cpu5: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu5: 256KB 64b/line 8-way L2 cache
cpu5: smt 1, core 1, package 0
cpu6 at mainbus0: apid 5 (application processor)
cpu6: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu6: 256KB 64b/line 8-way L2 cache
cpu6: smt 1, core 2, package 0
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
cpu7: 256KB 64b/line 8-way L2 cache
cpu7: smt 1, core 3, package 0
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
acpimcfg0 at acpi0
acpimcfg0: addr 0xf0000000, bus 0-127
acpihpet0 at acpi0: 23999999 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PEG0)
acpiprt2 at acpi0: bus -1 (PEG1)
acpiprt3 at acpi0: bus -1 (PEG2)
acpiprt4 at acpi0: bus -1 (RP09)
acpiprt5 at acpi0: bus -1 (RP10)
acpiprt6 at acpi0: bus -1 (RP11)
acpiprt7 at acpi0: bus -1 (RP12)
acpiprt8 at acpi0: bus -1 (RP13)
acpiprt9 at acpi0: bus 1 (RP01)
acpiprt10 at acpi0: bus -1 (RP02)
acpiprt11 at acpi0: bus 2 (RP03)
acpiprt12 at acpi0: bus -1 (RP04)
acpiprt13 at acpi0: bus -1 (RP05)
acpiprt14 at acpi0: bus -1 (RP06)
acpiprt15 at acpi0: bus -1 (RP07)
acpiprt16 at acpi0: bus -1 (RP08)
acpiprt17 at acpi0: bus -1 (RP17)
acpiprt18 at acpi0: bus -1 (RP18)
acpiprt19 at acpi0: bus -1 (RP19)
acpiprt20 at acpi0: bus -1 (RP20)
acpiprt21 at acpi0: bus -1 (RP21)
acpiprt22 at acpi0: bus -1 (RP22)
acpiprt23 at acpi0: bus -1 (RP23)
acpiprt24 at acpi0: bus -1 (RP24)
acpiprt25 at acpi0: bus -1 (RP14)
acpiprt26 at acpi0: bus -1 (RP15)
acpiprt27 at acpi0: bus -1 (RP16)
acpiec0 at acpi0
acpiec at acpi0 not configured
acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu4 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu5 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu6 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpicpu7 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151 mwait.1@0x33),
C1(1000@1 mwait.1), PSS
acpitz0 at acpi0: critical temperature is 107 degC
acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
acpicmos0 at acpi0
"INT3403" at acpi0 not configured
"INT3403" at acpi0 not configured
"ELAN25B6" at acpi0 not configured
"DELL081C" at acpi0 not configured
"ASA0949" at acpi0 not configured
"INT3446" at acpi0 not configured
"INT3403" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"INT33A1" at acpi0 not configured
"MSFT0101" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
"PNP0C14" at acpi0 not configured
acpibtn0 at acpi0: LID0
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
acpiac0 at acpi0: AC unit offline
acpibat0 at acpi0: BAT0 model "DELL 9W9MX86" serial 185 type LION oem "BYD"
"INT33D5" at acpi0 not configured
"INT3400" at acpi0 not configured
acpivideo0 at acpi0: GFX0
acpivout0 at acpivideo0: LCD_
cpu0: Enhanced SpeedStep 1789 MHz: speeds: 1901, 1900, 1800, 1700, 1600,
1500, 1400, 1300, 1100, 1000, 900, 800, 700, 600, 500, 400 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core 8G Host" rev 0x08
inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 620" rev 0x07
drm0 at inteldrm0
inteldrm0: msi
error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to load
firmware i915/kbl_dmc_ver1.bin (-22)
inteldrm0: 1920x1080, 32bpp
wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel Core 6G Thermal" rev 0x08 at pci0 dev 4 function 0 not configured
xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi,
xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
3.00/1.00 addr 1
pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
dwiic0 at pci0 dev 21 function 0 "Intel 100 Series I2C" rev 0x21: apic 2
int 16
iic0 at dwiic0
ihidev0 at iic0 addr 0x10 (polling), vendor 0x4f3 product 0x732, ELAN25B6
ihidev0: 14 report ids
ims0 at ihidev0 reportid 1: 1 button, tip
wsmouse0 at ims0 mux 0
hid at ihidev0 reportid 2 not configured
hid at ihidev0 reportid 3 not configured
hid at ihidev0 reportid 4 not configured
hid at ihidev0 reportid 6 not configured
hid at ihidev0 reportid 10 not configured
hid at ihidev0 reportid 14 not configured
dwiic1 at pci0 dev 21 function 1 "Intel 100 Series I2C" rev 0x21: apic 2
int 17
iic1 at dwiic1
ihidev1 at iic1 addr 0x2c (polling), vendor 0x44e product 0x121f, DELL081C
ihidev1: 12 report ids
imt0 at ihidev1
imt0: can't find button type
"Intel 100 Series I2C" rev 0x21 at pci0 dev 21 function 2 not configured
"Intel 100 Series I2C" rev 0x21 at pci0 dev 21 function 3 not configured
"Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
puc0 at pci0 dev 22 function 3 "Intel 100 Series KT" rev 0x21: ports: 16 com
com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi,
AHCI 1.3.1
ahci0: port 2: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 2 lun 0: <ATA, CT1000MX500SSD4, M3CR> SCSI3
0/direct fixed naa.500a0751e1dedfec
sd0: 953869MB, 512 bytes/sector, 1953525168 sectors, thin
ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
pci1 at ppb0 bus 1
rtsx0 at pci1 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01: msi
sdmmc0 at rtsx0: 4-bit, dma
ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
pci2 at ppb1 bus 2
iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev
0x78, msi
pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21
"Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev 0x21: msi
azalia0: codecs: Realtek/0x0256, Intel/0x280b, using Realtek/0x0256
audio0 at azalia0
ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
apic 2 int 16
iic2 at ichiic0
em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi, address
e4:b9:7a:1c:32:61
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5 irq 1 irq 12
pckbd0 at pckbc0 (kbd slot)
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
wsmouse1 at pms0 mux 0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
vmm0 at mainbus0: VMX/EPT
efifb at mainbus0 not configured
uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB
Receiver" rev 2.00/29.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub0 port 2 configuration 1 interface 1 "Logitech USB
Receiver" rev 2.00/29.01 addr 2
uhidev1: iclass 3/1, 17 report ids
ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
wsmouse2 at ums0 mux 0
uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0
uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0
uvideo0 at uhub0 port 5 configuration 1 interface 0
"CN0PYJNXLOG0085VB9F9A01 Integrated_Webcam_HD" rev 2.00/60.07 addr 3
video0 at uvideo0
ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.10 addr 4
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct fixed
sd1: 953868MB, 512 bytes/sector, 1953523553 sectors
root on sd1a (acaf7d63ffcbd53a.a) swap on sd1b dump on sd1b
iwm0: hw rev 0x230, fw ver 22.361476.0, address 04:d3:b0:69:88:0e

Reply | Threaded
Open this post in threaded view
|

Re: dell universal d6000 dock

sharon s.
anybody????

On 2/5/19 5:17 PM, [hidden email] wrote:

> Hi,
>
> I am running current from Jan 21st on a dell latitude 7490 (dmesg
> below) and was hoping to get a usb-c dock connected so that I could
> use 2 display ports, the hdmi, eth and extra usb ports in one easy to
> disconnect usb-c connection.
>
> The hdmi seems to work ok but I get the following errors in
> /var/log/messages when I plug/unplug a display port.
>
> Feb  5 16:48:56 curry /bsd: uhub1 at uhub0 port 1 configuration 1
> interface 0 "GenesysLogic USB2.1 Hub" rev 2.10/88.16 addr 5
> Feb  5 16:48:56 curry apmd: battery status: high. external power
> status: connected. estimated battery life 95%
> Feb  5 16:48:57 curry /bsd: uhub2 at uhub1 port 2 configuration 1
> interface 0 "GenesysLogic USB2.1 Hub" rev 2.10/88.17 addr 6
> Feb  5 16:48:58 curry /bsd: uhub3 at uhub1 port 3 configuration 1
> interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/88.32 addr 7
> Feb  5 16:48:59 curry /bsd: uhidev2 at uhub3 port 1 configuration 1
> interface 0 "Bizlink D6000 Controller" rev 2.00/0.18 addr 8
> Feb  5 16:48:59 curry /bsd: uhidev2: iclass 3/0, 1 report id
> Feb  5 16:48:59 curry /bsd: uhid4 at uhidev2 reportid 1: input=0,
> output=0, feature=1
> Feb  5 16:48:59 curry /bsd: uhub4 at uhub0 port 13 configuration 1
> interface 0 "GenesysLogic USB3.1 Hub" rev 3.10/88.16 addr 9
> Feb  5 16:49:00 curry /bsd: uaudio0 at uhub4 port 1 configuration 1
> interface 2 "DisplayLink Dell Universal Dock D6000" rev 3.10/31.27
> addr 10
> Feb  5 16:49:00 curry /bsd: uaudio0: audio descriptors make no sense,
> error=4
> Feb  5 16:49:00 curry /bsd: ugen1 at uhub4 port 1 configuration 1
> "DisplayLink Dell Universal Dock D6000" rev 3.10/31.27 addr 10
> Feb  5 16:49:01 curry /bsd: uhub5 at uhub4 port 2 configuration 1
> interface 0 "GenesysLogic USB3.1 Hub" rev 3.10/88.17 addr 11
> Feb  5 16:49:01 curry /bsd: uhub2 detached
> Feb  5 16:49:01 curry /bsd: uhid4 detached
> Feb  5 16:49:01 curry /bsd: uhidev2 detached
> Feb  5 16:49:01 curry /bsd: uhub3 detached
> Feb  5 16:49:01 curry /bsd: uhub1 detached
> Feb  5 16:49:02 curry /bsd: uhub1 at uhub0 port 1 configuration 1
> interface 0 "GenesysLogic USB2.1 Hub" rev 2.10/88.16 addr 5
> Feb  5 16:49:03 curry /bsd: uhub2 at uhub1 port 2 configuration 1
> interface 0 "GenesysLogic USB2.1 Hub" rev 2.10/88.17 addr 6
> Feb  5 16:49:04 curry /bsd: uhub3 at uhub1 port 3 configuration 1
> interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/88.32 addr 7
> Feb  5 16:49:05 curry /bsd: uhidev2 at uhub3 port 1 configuration 1
> interface 0 "Bizlink D6000 Controller" rev 2.00/0.18 addr 8
> Feb  5 16:49:05 curry /bsd: uhidev2: iclass 3/0, 1 report id
> Feb  5 16:49:05 curry /bsd: uhid4 at uhidev2 reportid 1: input=0,
> output=0, feature=1
> Feb  5 16:49:53 curry /bsd: umass0 at uhub5 port 2 configuration 1
> interface 0 "SanDisk Ultra" rev 3.00/1.00 addr 12
> Feb  5 16:49:53 curry /bsd: umass0: using SCSI over Bulk-Only
> Feb  5 16:49:53 curry /bsd: scsibus4 at umass0: 2 targets, initiator 0
> Feb  5 16:49:53 curry /bsd: sd2 at scsibus4 targ 1 lun 0: <SanDisk,
> Ultra, 1.00> SCSI4 0/direct removable serial.07815581200212119554
> Feb  5 16:49:53 curry /bsd: sd2: 29328MB, 512 bytes/sector, 60063744
> sectors
> Feb  5 16:51:59 curry /bsd: error:
> [drm:pid69604:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal
> timeout (has irq: 1)!
> Feb  5 16:54:57 curry /bsd: error:
> [drm:pid69604:intel_pipe_update_start] *ERROR* Potential atomic update
> failure on pipe B
> Feb  5 16:55:56 curry /bsd: WARNING !wm_changed failed at
> /usr/src/sys/dev/pci/drm/i915/intel_pm.c:3609
> Feb  5 16:56:39 curry /bsd: uhub2 detached
> Feb  5 16:56:39 curry /bsd: uhid4 detached
> Feb  5 16:56:39 curry /bsd: uhidev2 detached
> Feb  5 16:56:39 curry /bsd: uhub3 detached
> Feb  5 16:56:39 curry /bsd: uhub1 detached
> Feb  5 16:56:39 curry /bsd: uaudio0 detached
> Feb  5 16:56:39 curry /bsd: ugen1 detached
> Feb  5 16:56:39 curry /bsd: sd2 detached
> Feb  5 16:56:39 curry /bsd: scsibus4 detached
> Feb  5 16:56:39 curry /bsd: umass0 detached
> Feb  5 16:56:39 curry /bsd: uhub5 detached
> Feb  5 16:56:39 curry /bsd: uhub4 detached
> Feb  5 16:56:40 curry apmd: battery status: high. external power
> status: not connected. estimated battery life 95%
> Feb  5 17:06:45 curry /bsd: error:
> [drm:pid69604:intel_pipe_update_start] *ERROR* Potential atomic update
> failure on pipe A
>
> Any thoughts?
>
> I have to return the dock in a couple of days but if there is any
> procedures or output that someone would like to see in the meantime,
> let me know.
>
> Thanks,
>
> Thomas
>
>
> OpenBSD 6.4-current (GENERIC.MP) #625: Mon Jan 21 22:20:46 MST 2019
> [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 17037066240 (16247MB)
> avail mem = 16511123456 (15746MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 3.1 @ 0xe0000 (109 entries)
> bios0: vendor Dell Inc. version "1.7.2" date 11/26/2018
> bios0: Dell Inc. Latitude 7490
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S3 S4 S5
> acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT SSDT HPET SSDT
> UEFI SSDT LPIT SSDT SSDT SSDT SSDT DBGP DBG2 SSDT SSDT MSDM SLIC NHLT
> TPM2 ASF! DMAR BGRT
> acpi0: wakeup devices PXSX(S4) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4)
> RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) PXSX(S4) RP01(S4)
> PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) [...]
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1789.37 MHz, 06-8e-0a
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu0: 256KB 64b/line 8-way L2 cache
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> cpu0: apic clock running at 23MHz
> cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> cpu1 at mainbus0: apid 2 (application processor)
> cpu1: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu1: 256KB 64b/line 8-way L2 cache
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 4 (application processor)
> cpu2: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu2: 256KB 64b/line 8-way L2 cache
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 6 (application processor)
> cpu3: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu3: 256KB 64b/line 8-way L2 cache
> cpu3: smt 0, core 3, package 0
> cpu4 at mainbus0: apid 1 (application processor)
> cpu4: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
> cpu4:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu4: 256KB 64b/line 8-way L2 cache
> cpu4: smt 1, core 0, package 0
> cpu5 at mainbus0: apid 3 (application processor)
> cpu5: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
> cpu5:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu5: 256KB 64b/line 8-way L2 cache
> cpu5: smt 1, core 1, package 0
> cpu6 at mainbus0: apid 5 (application processor)
> cpu6: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
> cpu6:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu6: 256KB 64b/line 8-way L2 cache
> cpu6: smt 1, core 2, package 0
> cpu7 at mainbus0: apid 7 (application processor)
> cpu7: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
> cpu7:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> cpu7: 256KB 64b/line 8-way L2 cache
> cpu7: smt 1, core 3, package 0
> ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
> acpimcfg0 at acpi0
> acpimcfg0: addr 0xf0000000, bus 0-127
> acpihpet0 at acpi0: 23999999 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PEG0)
> acpiprt2 at acpi0: bus -1 (PEG1)
> acpiprt3 at acpi0: bus -1 (PEG2)
> acpiprt4 at acpi0: bus -1 (RP09)
> acpiprt5 at acpi0: bus -1 (RP10)
> acpiprt6 at acpi0: bus -1 (RP11)
> acpiprt7 at acpi0: bus -1 (RP12)
> acpiprt8 at acpi0: bus -1 (RP13)
> acpiprt9 at acpi0: bus 1 (RP01)
> acpiprt10 at acpi0: bus -1 (RP02)
> acpiprt11 at acpi0: bus 2 (RP03)
> acpiprt12 at acpi0: bus -1 (RP04)
> acpiprt13 at acpi0: bus -1 (RP05)
> acpiprt14 at acpi0: bus -1 (RP06)
> acpiprt15 at acpi0: bus -1 (RP07)
> acpiprt16 at acpi0: bus -1 (RP08)
> acpiprt17 at acpi0: bus -1 (RP17)
> acpiprt18 at acpi0: bus -1 (RP18)
> acpiprt19 at acpi0: bus -1 (RP19)
> acpiprt20 at acpi0: bus -1 (RP20)
> acpiprt21 at acpi0: bus -1 (RP21)
> acpiprt22 at acpi0: bus -1 (RP22)
> acpiprt23 at acpi0: bus -1 (RP23)
> acpiprt24 at acpi0: bus -1 (RP24)
> acpiprt25 at acpi0: bus -1 (RP14)
> acpiprt26 at acpi0: bus -1 (RP15)
> acpiprt27 at acpi0: bus -1 (RP16)
> acpiec0 at acpi0
> acpiec at acpi0 not configured
> acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu4 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu5 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu6 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpicpu7 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> mwait.1@0x33), C1(1000@1 mwait.1), PSS
> acpitz0 at acpi0: critical temperature is 107 degC
> acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> acpicmos0 at acpi0
> "INT3403" at acpi0 not configured
> "INT3403" at acpi0 not configured
> "ELAN25B6" at acpi0 not configured
> "DELL081C" at acpi0 not configured
> "ASA0949" at acpi0 not configured
> "INT3446" at acpi0 not configured
> "INT3403" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "INT33A1" at acpi0 not configured
> "MSFT0101" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> "PNP0C14" at acpi0 not configured
> acpibtn0 at acpi0: LID0
> acpibtn1 at acpi0: PBTN
> acpibtn2 at acpi0: SBTN
> acpiac0 at acpi0: AC unit offline
> acpibat0 at acpi0: BAT0 model "DELL 9W9MX86" serial 185 type LION oem
> "BYD"
> "INT33D5" at acpi0 not configured
> "INT3400" at acpi0 not configured
> acpivideo0 at acpi0: GFX0
> acpivout0 at acpivideo0: LCD_
> cpu0: Enhanced SpeedStep 1789 MHz: speeds: 1901, 1900, 1800, 1700,
> 1600, 1500, 1400, 1300, 1100, 1000, 900, 800, 700, 600, 500, 400 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "Intel Core 8G Host" rev 0x08
> inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 620" rev 0x07
> drm0 at inteldrm0
> inteldrm0: msi
> error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to
> load firmware i915/kbl_dmc_ver1.bin (-22)
> inteldrm0: 1920x1080, 32bpp
> wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> wsdisplay0: screen 1-5 added (std, vt100 emulation)
> "Intel Core 6G Thermal" rev 0x08 at pci0 dev 4 function 0 not configured
> xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi,
> xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> 3.00/1.00 addr 1
> pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
> dwiic0 at pci0 dev 21 function 0 "Intel 100 Series I2C" rev 0x21: apic
> 2 int 16
> iic0 at dwiic0
> ihidev0 at iic0 addr 0x10 (polling), vendor 0x4f3 product 0x732, ELAN25B6
> ihidev0: 14 report ids
> ims0 at ihidev0 reportid 1: 1 button, tip
> wsmouse0 at ims0 mux 0
> hid at ihidev0 reportid 2 not configured
> hid at ihidev0 reportid 3 not configured
> hid at ihidev0 reportid 4 not configured
> hid at ihidev0 reportid 6 not configured
> hid at ihidev0 reportid 10 not configured
> hid at ihidev0 reportid 14 not configured
> dwiic1 at pci0 dev 21 function 1 "Intel 100 Series I2C" rev 0x21: apic
> 2 int 17
> iic1 at dwiic1
> ihidev1 at iic1 addr 0x2c (polling), vendor 0x44e product 0x121f,
> DELL081C
> ihidev1: 12 report ids
> imt0 at ihidev1
> imt0: can't find button type
> "Intel 100 Series I2C" rev 0x21 at pci0 dev 21 function 2 not configured
> "Intel 100 Series I2C" rev 0x21 at pci0 dev 21 function 3 not configured
> "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
> puc0 at pci0 dev 22 function 3 "Intel 100 Series KT" rev 0x21: ports:
> 16 com
> com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
> ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi,
> AHCI 1.3.1
> ahci0: port 2: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 2 lun 0: <ATA, CT1000MX500SSD4, M3CR> SCSI3
> 0/direct fixed naa.500a0751e1dedfec
> sd0: 953869MB, 512 bytes/sector, 1953525168 sectors, thin
> ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
> pci1 at ppb0 bus 1
> rtsx0 at pci1 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01:
> msi
> sdmmc0 at rtsx0: 4-bit, dma
> ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
> pci2 at ppb1 bus 2
> iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev
> 0x78, msi
> pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21
> "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
> azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev
> 0x21: msi
> azalia0: codecs: Realtek/0x0256, Intel/0x280b, using Realtek/0x0256
> audio0 at azalia0
> ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
> apic 2 int 16
> iic2 at ichiic0
> em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi, address
> e4:b9:7a:1c:32:61
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> pckbd0 at pckbc0 (kbd slot)
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> wsmouse1 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> vmm0 at mainbus0: VMX/EPT
> efifb at mainbus0 not configured
> uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB
> Receiver" rev 2.00/29.01 addr 2
> uhidev0: iclass 3/1
> ukbd0 at uhidev0: 8 variable keys, 6 key codes
> wskbd1 at ukbd0 mux 1
> wskbd1: connecting to wsdisplay0
> uhidev1 at uhub0 port 2 configuration 1 interface 1 "Logitech USB
> Receiver" rev 2.00/29.01 addr 2
> uhidev1: iclass 3/1, 17 report ids
> ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
> wsmouse2 at ums0 mux 0
> uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
> uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
> uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0
> uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0
> uvideo0 at uhub0 port 5 configuration 1 interface 0
> "CN0PYJNXLOG0085VB9F9A01 Integrated_Webcam_HD" rev 2.00/60.07 addr 3
> video0 at uvideo0
> ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.10 addr 4
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct
> fixed
> sd1: 953868MB, 512 bytes/sector, 1953523553 sectors
> root on sd1a (acaf7d63ffcbd53a.a) swap on sd1b dump on sd1b
> iwm0: hw rev 0x230, fw ver 22.361476.0, address 04:d3:b0:69:88:0e
>

Reply | Threaded
Open this post in threaded view
|

Re: dell universal d6000 dock

¯\_(ツ)_/¯ ¯\_(ツ)_/¯
try running stable.

Reply | Threaded
Open this post in threaded view
|

Re: dell universal d6000 dock

Jiri B-3
In reply to this post by sharon s.
Maybe you just face old diplayport issue like here

https://marc.info/?t=151695613100004&r=1&w=2

and it is not related to docking station at all?

I gave up and I used to use DP->HDMI->DVI and USB-c>HDMI->DVI reductions :)

j.

On Tue, Feb 12, 2019 at 12:11 AM [hidden email] <[hidden email]> wrote:

>
> anybody????
>
> On 2/5/19 5:17 PM, [hidden email] wrote:
> > Hi,
> >
> > I am running current from Jan 21st on a dell latitude 7490 (dmesg
> > below) and was hoping to get a usb-c dock connected so that I could
> > use 2 display ports, the hdmi, eth and extra usb ports in one easy to
> > disconnect usb-c connection.
> >
> > The hdmi seems to work ok but I get the following errors in
> > /var/log/messages when I plug/unplug a display port.
> >
> > Feb  5 16:48:56 curry /bsd: uhub1 at uhub0 port 1 configuration 1
> > interface 0 "GenesysLogic USB2.1 Hub" rev 2.10/88.16 addr 5
> > Feb  5 16:48:56 curry apmd: battery status: high. external power
> > status: connected. estimated battery life 95%
> > Feb  5 16:48:57 curry /bsd: uhub2 at uhub1 port 2 configuration 1
> > interface 0 "GenesysLogic USB2.1 Hub" rev 2.10/88.17 addr 6
> > Feb  5 16:48:58 curry /bsd: uhub3 at uhub1 port 3 configuration 1
> > interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/88.32 addr 7
> > Feb  5 16:48:59 curry /bsd: uhidev2 at uhub3 port 1 configuration 1
> > interface 0 "Bizlink D6000 Controller" rev 2.00/0.18 addr 8
> > Feb  5 16:48:59 curry /bsd: uhidev2: iclass 3/0, 1 report id
> > Feb  5 16:48:59 curry /bsd: uhid4 at uhidev2 reportid 1: input=0,
> > output=0, feature=1
> > Feb  5 16:48:59 curry /bsd: uhub4 at uhub0 port 13 configuration 1
> > interface 0 "GenesysLogic USB3.1 Hub" rev 3.10/88.16 addr 9
> > Feb  5 16:49:00 curry /bsd: uaudio0 at uhub4 port 1 configuration 1
> > interface 2 "DisplayLink Dell Universal Dock D6000" rev 3.10/31.27
> > addr 10
> > Feb  5 16:49:00 curry /bsd: uaudio0: audio descriptors make no sense,
> > error=4
> > Feb  5 16:49:00 curry /bsd: ugen1 at uhub4 port 1 configuration 1
> > "DisplayLink Dell Universal Dock D6000" rev 3.10/31.27 addr 10
> > Feb  5 16:49:01 curry /bsd: uhub5 at uhub4 port 2 configuration 1
> > interface 0 "GenesysLogic USB3.1 Hub" rev 3.10/88.17 addr 11
> > Feb  5 16:49:01 curry /bsd: uhub2 detached
> > Feb  5 16:49:01 curry /bsd: uhid4 detached
> > Feb  5 16:49:01 curry /bsd: uhidev2 detached
> > Feb  5 16:49:01 curry /bsd: uhub3 detached
> > Feb  5 16:49:01 curry /bsd: uhub1 detached
> > Feb  5 16:49:02 curry /bsd: uhub1 at uhub0 port 1 configuration 1
> > interface 0 "GenesysLogic USB2.1 Hub" rev 2.10/88.16 addr 5
> > Feb  5 16:49:03 curry /bsd: uhub2 at uhub1 port 2 configuration 1
> > interface 0 "GenesysLogic USB2.1 Hub" rev 2.10/88.17 addr 6
> > Feb  5 16:49:04 curry /bsd: uhub3 at uhub1 port 3 configuration 1
> > interface 0 "Genesys Logic USB2.0 Hub" rev 2.00/88.32 addr 7
> > Feb  5 16:49:05 curry /bsd: uhidev2 at uhub3 port 1 configuration 1
> > interface 0 "Bizlink D6000 Controller" rev 2.00/0.18 addr 8
> > Feb  5 16:49:05 curry /bsd: uhidev2: iclass 3/0, 1 report id
> > Feb  5 16:49:05 curry /bsd: uhid4 at uhidev2 reportid 1: input=0,
> > output=0, feature=1
> > Feb  5 16:49:53 curry /bsd: umass0 at uhub5 port 2 configuration 1
> > interface 0 "SanDisk Ultra" rev 3.00/1.00 addr 12
> > Feb  5 16:49:53 curry /bsd: umass0: using SCSI over Bulk-Only
> > Feb  5 16:49:53 curry /bsd: scsibus4 at umass0: 2 targets, initiator 0
> > Feb  5 16:49:53 curry /bsd: sd2 at scsibus4 targ 1 lun 0: <SanDisk,
> > Ultra, 1.00> SCSI4 0/direct removable serial.07815581200212119554
> > Feb  5 16:49:53 curry /bsd: sd2: 29328MB, 512 bytes/sector, 60063744
> > sectors
> > Feb  5 16:51:59 curry /bsd: error:
> > [drm:pid69604:intel_dp_aux_wait_done] *ERROR* dp aux hw did not signal
> > timeout (has irq: 1)!
> > Feb  5 16:54:57 curry /bsd: error:
> > [drm:pid69604:intel_pipe_update_start] *ERROR* Potential atomic update
> > failure on pipe B
> > Feb  5 16:55:56 curry /bsd: WARNING !wm_changed failed at
> > /usr/src/sys/dev/pci/drm/i915/intel_pm.c:3609
> > Feb  5 16:56:39 curry /bsd: uhub2 detached
> > Feb  5 16:56:39 curry /bsd: uhid4 detached
> > Feb  5 16:56:39 curry /bsd: uhidev2 detached
> > Feb  5 16:56:39 curry /bsd: uhub3 detached
> > Feb  5 16:56:39 curry /bsd: uhub1 detached
> > Feb  5 16:56:39 curry /bsd: uaudio0 detached
> > Feb  5 16:56:39 curry /bsd: ugen1 detached
> > Feb  5 16:56:39 curry /bsd: sd2 detached
> > Feb  5 16:56:39 curry /bsd: scsibus4 detached
> > Feb  5 16:56:39 curry /bsd: umass0 detached
> > Feb  5 16:56:39 curry /bsd: uhub5 detached
> > Feb  5 16:56:39 curry /bsd: uhub4 detached
> > Feb  5 16:56:40 curry apmd: battery status: high. external power
> > status: not connected. estimated battery life 95%
> > Feb  5 17:06:45 curry /bsd: error:
> > [drm:pid69604:intel_pipe_update_start] *ERROR* Potential atomic update
> > failure on pipe A
> >
> > Any thoughts?
> >
> > I have to return the dock in a couple of days but if there is any
> > procedures or output that someone would like to see in the meantime,
> > let me know.
> >
> > Thanks,
> >
> > Thomas
> >
> >
> > OpenBSD 6.4-current (GENERIC.MP) #625: Mon Jan 21 22:20:46 MST 2019
> > [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > real mem = 17037066240 (16247MB)
> > avail mem = 16511123456 (15746MB)
> > mpath0 at root
> > scsibus0 at mpath0: 256 targets
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 3.1 @ 0xe0000 (109 entries)
> > bios0: vendor Dell Inc. version "1.7.2" date 11/26/2018
> > bios0: Dell Inc. Latitude 7490
> > acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S3 S4 S5
> > acpi0: tables DSDT FACP APIC FPDT FIDT MCFG HPET SSDT SSDT HPET SSDT
> > UEFI SSDT LPIT SSDT SSDT SSDT SSDT DBGP DBG2 SSDT SSDT MSDM SLIC NHLT
> > TPM2 ASF! DMAR BGRT
> > acpi0: wakeup devices PXSX(S4) RP09(S4) PXSX(S4) RP10(S4) PXSX(S4)
> > RP11(S4) PXSX(S4) RP12(S4) PXSX(S4) RP13(S4) PXSX(S4) RP01(S4)
> > PXSX(S4) RP02(S4) PXSX(S4) RP03(S4) [...]
> > acpitimer0 at acpi0: 3579545 Hz, 24 bits
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1789.37 MHz, 06-8e-0a
> > cpu0:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> > cpu0: 256KB 64b/line 8-way L2 cache
> > cpu0: smt 0, core 0, package 0
> > mtrr: Pentium Pro MTRR support, 10 var ranges, 88 fixed ranges
> > cpu0: apic clock running at 23MHz
> > cpu0: mwait min=64, max=64, C-substates=0.2.1.2.4.1.1.1, IBE
> > cpu1 at mainbus0: apid 2 (application processor)
> > cpu1: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
> > cpu1:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> > cpu1: 256KB 64b/line 8-way L2 cache
> > cpu1: smt 0, core 1, package 0
> > cpu2 at mainbus0: apid 4 (application processor)
> > cpu2: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
> > cpu2:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> > cpu2: 256KB 64b/line 8-way L2 cache
> > cpu2: smt 0, core 2, package 0
> > cpu3 at mainbus0: apid 6 (application processor)
> > cpu3: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
> > cpu3:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> > cpu3: 256KB 64b/line 8-way L2 cache
> > cpu3: smt 0, core 3, package 0
> > cpu4 at mainbus0: apid 1 (application processor)
> > cpu4: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
> > cpu4:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> > cpu4: 256KB 64b/line 8-way L2 cache
> > cpu4: smt 1, core 0, package 0
> > cpu5 at mainbus0: apid 3 (application processor)
> > cpu5: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
> > cpu5:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> > cpu5: 256KB 64b/line 8-way L2 cache
> > cpu5: smt 1, core 1, package 0
> > cpu6 at mainbus0: apid 5 (application processor)
> > cpu6: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
> > cpu6:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> > cpu6: 256KB 64b/line 8-way L2 cache
> > cpu6: smt 1, core 2, package 0
> > cpu7 at mainbus0: apid 7 (application processor)
> > cpu7: Intel(R) Core(TM) i5-8350U CPU @ 1.70GHz, 1795.82 MHz, 06-8e-0a
> > cpu7:
> > FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX,SMX,EST,TM2,SSSE3,SDBG,FMA3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,x2APIC,MOVBE,POPCNT,DEADLINE,AES,XSAVE,AVX,F16C,RDRAND,NXE,PAGE1GB,RDTSCP,LONG,LAHF,ABM,3DNOWP,PERF,ITSC,FSGSBASE,SGX,BMI1,HLE,AVX2,SMEP,BMI2,ERMS,INVPCID,RTM,MPX,RDSEED,ADX,SMAP,CLFLUSHOPT,PT,IBRS,IBPB,STIBP,L1DF,SSBD,SENSOR,ARAT,XSAVEOPT,XSAVEC,XGETBV1,XSAVES,MELTDOWN
> > cpu7: 256KB 64b/line 8-way L2 cache
> > cpu7: smt 1, core 3, package 0
> > ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 120 pins
> > acpimcfg0 at acpi0
> > acpimcfg0: addr 0xf0000000, bus 0-127
> > acpihpet0 at acpi0: 23999999 Hz
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus -1 (PEG0)
> > acpiprt2 at acpi0: bus -1 (PEG1)
> > acpiprt3 at acpi0: bus -1 (PEG2)
> > acpiprt4 at acpi0: bus -1 (RP09)
> > acpiprt5 at acpi0: bus -1 (RP10)
> > acpiprt6 at acpi0: bus -1 (RP11)
> > acpiprt7 at acpi0: bus -1 (RP12)
> > acpiprt8 at acpi0: bus -1 (RP13)
> > acpiprt9 at acpi0: bus 1 (RP01)
> > acpiprt10 at acpi0: bus -1 (RP02)
> > acpiprt11 at acpi0: bus 2 (RP03)
> > acpiprt12 at acpi0: bus -1 (RP04)
> > acpiprt13 at acpi0: bus -1 (RP05)
> > acpiprt14 at acpi0: bus -1 (RP06)
> > acpiprt15 at acpi0: bus -1 (RP07)
> > acpiprt16 at acpi0: bus -1 (RP08)
> > acpiprt17 at acpi0: bus -1 (RP17)
> > acpiprt18 at acpi0: bus -1 (RP18)
> > acpiprt19 at acpi0: bus -1 (RP19)
> > acpiprt20 at acpi0: bus -1 (RP20)
> > acpiprt21 at acpi0: bus -1 (RP21)
> > acpiprt22 at acpi0: bus -1 (RP22)
> > acpiprt23 at acpi0: bus -1 (RP23)
> > acpiprt24 at acpi0: bus -1 (RP24)
> > acpiprt25 at acpi0: bus -1 (RP14)
> > acpiprt26 at acpi0: bus -1 (RP15)
> > acpiprt27 at acpi0: bus -1 (RP16)
> > acpiec0 at acpi0
> > acpiec at acpi0 not configured
> > acpicpu0 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> > mwait.1@0x33), C1(1000@1 mwait.1), PSS
> > acpicpu1 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> > mwait.1@0x33), C1(1000@1 mwait.1), PSS
> > acpicpu2 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> > mwait.1@0x33), C1(1000@1 mwait.1), PSS
> > acpicpu3 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> > mwait.1@0x33), C1(1000@1 mwait.1), PSS
> > acpicpu4 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> > mwait.1@0x33), C1(1000@1 mwait.1), PSS
> > acpicpu5 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> > mwait.1@0x33), C1(1000@1 mwait.1), PSS
> > acpicpu6 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> > mwait.1@0x33), C1(1000@1 mwait.1), PSS
> > acpicpu7 at acpi0: C3(200@1034 mwait.1@0x60), C2(200@151
> > mwait.1@0x33), C1(1000@1 mwait.1), PSS
> > acpitz0 at acpi0: critical temperature is 107 degC
> > acpipci0 at acpi0 PCI0: 0x00000000 0x00000011 0x00000001
> > acpicmos0 at acpi0
> > "INT3403" at acpi0 not configured
> > "INT3403" at acpi0 not configured
> > "ELAN25B6" at acpi0 not configured
> > "DELL081C" at acpi0 not configured
> > "ASA0949" at acpi0 not configured
> > "INT3446" at acpi0 not configured
> > "INT3403" at acpi0 not configured
> > "PNP0C14" at acpi0 not configured
> > "INT33A1" at acpi0 not configured
> > "MSFT0101" at acpi0 not configured
> > "PNP0C14" at acpi0 not configured
> > "PNP0C14" at acpi0 not configured
> > "PNP0C14" at acpi0 not configured
> > acpibtn0 at acpi0: LID0
> > acpibtn1 at acpi0: PBTN
> > acpibtn2 at acpi0: SBTN
> > acpiac0 at acpi0: AC unit offline
> > acpibat0 at acpi0: BAT0 model "DELL 9W9MX86" serial 185 type LION oem
> > "BYD"
> > "INT33D5" at acpi0 not configured
> > "INT3400" at acpi0 not configured
> > acpivideo0 at acpi0: GFX0
> > acpivout0 at acpivideo0: LCD_
> > cpu0: Enhanced SpeedStep 1789 MHz: speeds: 1901, 1900, 1800, 1700,
> > 1600, 1500, 1400, 1300, 1100, 1000, 900, 800, 700, 600, 500, 400 MHz
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "Intel Core 8G Host" rev 0x08
> > inteldrm0 at pci0 dev 2 function 0 "Intel UHD Graphics 620" rev 0x07
> > drm0 at inteldrm0
> > inteldrm0: msi
> > error: [drm:pid0:i915_firmware_load_error_print] *ERROR* failed to
> > load firmware i915/kbl_dmc_ver1.bin (-22)
> > inteldrm0: 1920x1080, 32bpp
> > wsdisplay0 at inteldrm0 mux 1: console (std, vt100 emulation)
> > wsdisplay0: screen 1-5 added (std, vt100 emulation)
> > "Intel Core 6G Thermal" rev 0x08 at pci0 dev 4 function 0 not configured
> > xhci0 at pci0 dev 20 function 0 "Intel 100 Series xHCI" rev 0x21: msi,
> > xHCI 1.0
> > usb0 at xhci0: USB revision 3.0
> > uhub0 at usb0 configuration 1 interface 0 "Intel xHCI root hub" rev
> > 3.00/1.00 addr 1
> > pchtemp0 at pci0 dev 20 function 2 "Intel 100 Series Thermal" rev 0x21
> > dwiic0 at pci0 dev 21 function 0 "Intel 100 Series I2C" rev 0x21: apic
> > 2 int 16
> > iic0 at dwiic0
> > ihidev0 at iic0 addr 0x10 (polling), vendor 0x4f3 product 0x732, ELAN25B6
> > ihidev0: 14 report ids
> > ims0 at ihidev0 reportid 1: 1 button, tip
> > wsmouse0 at ims0 mux 0
> > hid at ihidev0 reportid 2 not configured
> > hid at ihidev0 reportid 3 not configured
> > hid at ihidev0 reportid 4 not configured
> > hid at ihidev0 reportid 6 not configured
> > hid at ihidev0 reportid 10 not configured
> > hid at ihidev0 reportid 14 not configured
> > dwiic1 at pci0 dev 21 function 1 "Intel 100 Series I2C" rev 0x21: apic
> > 2 int 17
> > iic1 at dwiic1
> > ihidev1 at iic1 addr 0x2c (polling), vendor 0x44e product 0x121f,
> > DELL081C
> > ihidev1: 12 report ids
> > imt0 at ihidev1
> > imt0: can't find button type
> > "Intel 100 Series I2C" rev 0x21 at pci0 dev 21 function 2 not configured
> > "Intel 100 Series I2C" rev 0x21 at pci0 dev 21 function 3 not configured
> > "Intel 100 Series MEI" rev 0x21 at pci0 dev 22 function 0 not configured
> > puc0 at pci0 dev 22 function 3 "Intel 100 Series KT" rev 0x21: ports:
> > 16 com
> > com4 at puc0 port 0 apic 2 int 19: ns16550a, 16 byte fifo
> > ahci0 at pci0 dev 23 function 0 "Intel 100 Series AHCI" rev 0x21: msi,
> > AHCI 1.3.1
> > ahci0: port 2: 6.0Gb/s
> > scsibus1 at ahci0: 32 targets
> > sd0 at scsibus1 targ 2 lun 0: <ATA, CT1000MX500SSD4, M3CR> SCSI3
> > 0/direct fixed naa.500a0751e1dedfec
> > sd0: 953869MB, 512 bytes/sector, 1953525168 sectors, thin
> > ppb0 at pci0 dev 28 function 0 "Intel 100 Series PCIE" rev 0xf1: msi
> > pci1 at ppb0 bus 1
> > rtsx0 at pci1 dev 0 function 0 "Realtek RTS525A Card Reader" rev 0x01:
> > msi
> > sdmmc0 at rtsx0: 4-bit, dma
> > ppb1 at pci0 dev 28 function 2 "Intel 100 Series PCIE" rev 0xf1: msi
> > pci2 at ppb1 bus 2
> > iwm0 at pci2 dev 0 function 0 "Intel Dual Band Wireless-AC 8265" rev
> > 0x78, msi
> > pcib0 at pci0 dev 31 function 0 "Intel 200 Series LPC" rev 0x21
> > "Intel 100 Series PMC" rev 0x21 at pci0 dev 31 function 2 not configured
> > azalia0 at pci0 dev 31 function 3 "Intel 200 Series HD Audio" rev
> > 0x21: msi
> > azalia0: codecs: Realtek/0x0256, Intel/0x280b, using Realtek/0x0256
> > audio0 at azalia0
> > ichiic0 at pci0 dev 31 function 4 "Intel 100 Series SMBus" rev 0x21:
> > apic 2 int 16
> > iic2 at ichiic0
> > em0 at pci0 dev 31 function 6 "Intel I219-LM" rev 0x21: msi, address
> > e4:b9:7a:1c:32:61
> > isa0 at pcib0
> > isadma0 at isa0
> > pckbc0 at isa0 port 0x60/5 irq 1 irq 12
> > pckbd0 at pckbc0 (kbd slot)
> > wskbd0 at pckbd0: console keyboard, using wsdisplay0
> > pms0 at pckbc0 (aux slot)
> > wsmouse1 at pms0 mux 0
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > vmm0 at mainbus0: VMX/EPT
> > efifb at mainbus0 not configured
> > uhidev0 at uhub0 port 2 configuration 1 interface 0 "Logitech USB
> > Receiver" rev 2.00/29.01 addr 2
> > uhidev0: iclass 3/1
> > ukbd0 at uhidev0: 8 variable keys, 6 key codes
> > wskbd1 at ukbd0 mux 1
> > wskbd1: connecting to wsdisplay0
> > uhidev1 at uhub0 port 2 configuration 1 interface 1 "Logitech USB
> > Receiver" rev 2.00/29.01 addr 2
> > uhidev1: iclass 3/1, 17 report ids
> > ums0 at uhidev1 reportid 2: 16 buttons, Z and W dir
> > wsmouse2 at ums0 mux 0
> > uhid0 at uhidev1 reportid 3: input=4, output=0, feature=0
> > uhid1 at uhidev1 reportid 4: input=1, output=0, feature=0
> > uhid2 at uhidev1 reportid 16: input=6, output=6, feature=0
> > uhid3 at uhidev1 reportid 17: input=19, output=19, feature=0
> > uvideo0 at uhub0 port 5 configuration 1 interface 0
> > "CN0PYJNXLOG0085VB9F9A01 Integrated_Webcam_HD" rev 2.00/60.07 addr 3
> > video0 at uvideo0
> > ugen0 at uhub0 port 7 "Intel Bluetooth" rev 2.00/0.10 addr 4
> > vscsi0 at root
> > scsibus2 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus3 at softraid0: 256 targets
> > sd1 at scsibus3 targ 1 lun 0: <OPENBSD, SR CRYPTO, 006> SCSI2 0/direct
> > fixed
> > sd1: 953868MB, 512 bytes/sector, 1953523553 sectors
> > root on sd1a (acaf7d63ffcbd53a.a) swap on sd1b dump on sd1b
> > iwm0: hw rev 0x230, fw ver 22.361476.0, address 04:d3:b0:69:88:0e
> >
>

Reply | Threaded
Open this post in threaded view
|

Re: dell universal d6000 dock

Nick Holland
In reply to this post by ¯\_(ツ)_/¯ ¯\_(ツ)_/¯
On 2/12/19 3:19 AM, ¯\_(ツ)_/¯ ¯\_(ツ)_/¯ wrote:
> try running stable.
>

Stunningly bad advice for a hardware problem.

There's literally nothing in -stable that isn't in -current, and when it
comes to hardware support, a most recent snapshot is always the best.

Nick.