clean install, but seg faults on applying 1st patch

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

clean install, but seg faults on applying 1st patch

Chris-135
Install went fine, just attempting to apply 1st patch,
died once with Segmentation fault, then retried with clean tree
and got 2nd seg fault

Athlon 64/Asus  K8V-X SE MB

Hardware seems to be fine, but now wondering ???

last command typed:  make -f Makefile.bsd-wrapper


cc -O2 -pipe  -fno-strict-aliasing -fno-delete-null-pointer-checks
-DPERL_CORE -DPERL_RANDOM_DEVICE="/dev/arandom" -I. -c regcomp.c -o
regcomp.o
regcomp.c: In function `S_study_chunk':
regcomp.c:734: warning: comparison is always false due to limited
range of data type


cc -O2 -pipe  -fno-strict-aliasing -fno-delete-null-pointer-checks
-DPERL_CORE -DPERL_RANDOM_DEVICE="/dev/arandom" -I. -c -p regcomp.c
-o regcomp.po
regcomp.c: In function `S_study_chunk':
regcomp.c:734: warning: comparison is always false due to limited
range of data type


cc -O2 -pipe  -fno-strict-aliasing -fno-delete-null-pointer-checks
-DPERL_CORE -DPERL_RANDOM_DEVICE="/dev/arandom" -I. -c -p regexec.c
-o regexec.po
regexec.c: In function `S_regmatch':
regexec.c:3998: internal compiler error: Segmentation fault
Please submit a full bug report,
with preprocessed source if appropriate.
See <URL:http://gcc.gnu.org/bugs.html> for instructions.
*** Error code 1

Stop in /usr/src/gnu/usr.bin/perl.


dmesg
ib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: unknown winbond chip ID 0xa1
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
arplookup: unable to enter address for 173.16.1.25

uvm_fault(0xd0598a80, 0xf7cf7000, 0, 3) -> e
kernel: page fault trap, code=0
Stopped at      pool_get+0x131: movl    %eax,0x8(%ecx)

ddb> syncing disks... done
WARNING: not updating battery clock
OpenBSD 3.8 (GENERIC) #138: Sat Sep 10 15:41:37 MDT 2005
     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: AMD Athlon(tm) 64 Processor 2800+ ("AuthenticAMD" 686-class,
512KB L2 cache) 1.81 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2
cpu0: AMD Powernow: FID VID TTP TM
real mem  = 1072996352 (1047848K)
avail mem = 972345344 (949556K)
using 4278 buffers containing 53751808 bytes (52492K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/30/05, BIOS32 rev. 0 @ 0xf0010
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf5c80/176 (9 entries)
pcibios0: no compatible PCI ICU found: ICU vendor 0x1106 product 0x3227
pcibios0: Warning, unable to fix up PCI interrupt routing
pcibios0: PCI bus #1 is the last bus
bios0: ROM list: 0xc0000/0xc000 0xcc000/0x1000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "VIA K8HTB Host" rev 0x00
pchb1 at pci0 dev 0 function 1 "VIA K8HTB Host" rev 0x00
pchb2 at pci0 dev 0 function 2 "VIA K8HTB Host" rev 0x00
pchb3 at pci0 dev 0 function 3 "VIA K8HTB Host" rev 0x00
pchb4 at pci0 dev 0 function 4 "VIA K8HTB Host" rev 0x00
pchb5 at pci0 dev 0 function 7 "VIA K8HTB Host" rev 0x00
ppb0 at pci0 dev 1 function 0 "VIA K8HTB AGP" rev 0x00
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon VE QY" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
em0 at pci0 dev 13 function 0 "Intel PRO/1000GT (82541GI)" rev 0x05:
irq 5, address: 00:0e:0c:a2:1f:d1
pciide0 at pci0 dev 15 function 0 "VIA VT8237 SATA" rev 0x80: DMA
pciide0: using irq 10 for native-PCI interrupt
pciide1 at pci0 dev 15 function 1 "VIA VT82C571 IDE" rev 0x06:
ATA133, channel 0 configured to compatibility, channel 1 configured
to compatibility
wd0 at pciide1 channel 0 drive 0: <ST380011A>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd1 at pciide1 channel 0 drive 1: <ST380011A>
wd1: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
wd1(pciide1:0:1): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide1 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <ASUS, DVD-E616A, 1.07> SCSI0 5/cdrom removable
cd0(pciide1:1:0): using PIO mode 4, Ultra-DMA mode 5
uhci0 at pci0 dev 16 function 0 "VIA VT83C572 USB" rev 0x81: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 16 function 1 "VIA VT83C572 USB" rev 0x81: irq 11
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 16 function 2 "VIA VT83C572 USB" rev 0x81: irq 10
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 16 function 3 "VIA VT83C572 USB" rev 0x81: irq 10
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: VIA UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 16 function 4 "VIA VT6202 USB" rev 0x86: irq 5
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: VIA EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
pcib0 at pci0 dev 17 function 0 "VIA VT8237 ISA" rev 0x00
auvia0 at pci0 dev 17 function 5 "VIA VT8233 AC97" rev 0x60: irq 5
ac97: codec id 0x41445368 (Analog Devices AD1888)
ac97: codec features headphone, 20 bit DAC, No 3D Stereo
audio0 at auvia0
vr0 at pci0 dev 18 function 0 "VIA RhineII-2" rev 0x78: irq 11
address 00:15:f2:17:fc:24
rlphy0 at vr0 phy 1: RTL8201L 10/100 PHY, rev. 1
pchb6 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb7 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb8 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb9 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
lm0 at isa0 port 0x290/8: unknown winbond chip ID 0xa1
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
fd0 at fdc0 drive 0: 1.44MB 80 cyl, 2 head, 18 sec
biomask ff6d netmask ff6d ttymask ffef
pctr: user-level cycle counter enabled
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: wd1 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302

Reply | Threaded
Open this post in threaded view
|

Re: clean install, but seg faults on applying 1st patch

Jonathan Gray
On Tue, Jan 24, 2006 at 12:40:21AM -0600, Chris wrote:
> Install went fine, just attempting to apply 1st patch,
> died once with Segmentation fault, then retried with clean tree
> and got 2nd seg fault
>
> Athlon 64/Asus  K8V-X SE MB
>
> Hardware seems to be fine, but now wondering ???

Getting an ICE in gcc is normally due to faulty memory...

Reply | Threaded
Open this post in threaded view
|

Re: clean install, but seg faults on applying 1st patch

Ted Unangst-2
On 1/24/06, Jonathan Gray <[hidden email]> wrote:

> On Tue, Jan 24, 2006 at 12:40:21AM -0600, Chris wrote:
> > Install went fine, just attempting to apply 1st patch,
> > died once with Segmentation fault, then retried with clean tree
> > and got 2nd seg fault
> >
> > Athlon 64/Asus  K8V-X SE MB
> >
> > Hardware seems to be fine, but now wondering ???
>
> Getting an ICE in gcc is normally due to faulty memory...

how many times did you try it?

Reply | Threaded
Open this post in threaded view
|

Re: clean install, but seg faults on applying 1st patch

Chris-135
At 9:54 AM -0800 1/24/06, Ted Unangst wrote:

>On 1/24/06, Jonathan Gray <[hidden email]> wrote:
>> On Tue, Jan 24, 2006 at 12:40:21AM -0600, Chris wrote:
>> > Install went fine, just attempting to apply 1st patch,
>> > died once with Segmentation fault, then retried with clean tree
>> > and got 2nd seg fault
>> >
>> > Athlon 64/Asus  K8V-X SE MB
>> >
>> > Hardware seems to be fine, but now wondering ???
>>
>> Getting an ICE in gcc is normally due to faulty memory...
>
>how many times did you try it?

I reinstalled and got it a number of times with clean source trees,
so I finally figured that something else was wrong.  I ordered Samsung
memory from "Memory Suppliers" (nothing but problems with
theses guys) and they sent me Buffalo "chips", eyes roll,
which is cheap ass Taiwanese memory. Swapped
the dimms and the system wouldn't even boot, pulled the second
and everything works fine.

Thanks for the suggestions... wish they'd come quicker and I'd
saved a whole lot red eyed time ... :-)

Chris