can't map interrupt on alix2d13 with 6.0-stable

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
6 messages Options
Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

can't map interrupt on alix2d13 with 6.0-stable

Dimitris Papastamos
Hi,

I have an alix2d13 and running 6.0-stable on it.

I get this in dmesg:

vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: can't map interrupt
vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: can't map interrupt

I think vr1 should map to irq 11 and vr2 to irq 15.

I have tried the latest 0.99m bios and also 0.99h without success.  I
also booted bsd.rd from -current as well as bsd.rd from random OpenBSD
versions going back to 5.0.

So I am not sure this is an issue with OpenBSD (probably not in fact)
but I would appreciate some pointers.

If nothing else, I will try some other system on it and see if I have
any success.

OpenBSD 6.0-stable (GENERIC) #0: Mon Feb 13 22:06:28 GMT 2017
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 499 MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
real mem  = 267931648 (255MB)
avail mem = 250146816 (238MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 11/05/08, BIOS32 rev. 0 @ 0xfd088
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0xa800
cpu0 at mainbus0: (uniprocessor)
mtrr: K6-family MTRR support (2 registers)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address 00:0d:b9:32:4c:a0
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034
vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: can't map interrupt
vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: can't map interrupt
glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit 3579545Hz timer, watchdog, gpio, i2c
gpio0 at glxpcib0: 32 pins
iic0 at glxpcib0
maxtmp0 at iic0 addr 0x4c: lm86
pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <SDCFHS-008G>
wd0: 1-sector PIO, LBA48, 7647MB, 15662304 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 12, version 1.0, legacy support
ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 12
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
nvram: invalid checksum
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (c20bb005d7d65410.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: can't map interrupt on alix2d13 with 6.0-stable

Manolis Tzanidakis-2
On Tue (21/02/17), Dimitris Papastamos wrote:

> Hi,
>
> I have an alix2d13 and running 6.0-stable on it.
>
> I get this in dmesg:
>
> vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: can't map interrupt
> vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: can't map interrupt
>
> I think vr1 should map to irq 11 and vr2 to irq 15.
>
> I have tried the latest 0.99m bios and also 0.99h without success.  I
> also booted bsd.rd from -current as well as bsd.rd from random OpenBSD
> versions going back to 5.0.
>
> So I am not sure this is an issue with OpenBSD (probably not in fact)
> but I would appreciate some pointers.
>
> If nothing else, I will try some other system on it and see if I have
> any success.
>
> OpenBSD 6.0-stable (GENERIC) #0: Mon Feb 13 22:06:28 GMT 2017
>     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 499 MHz
> cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
> real mem  = 267931648 (255MB)
> avail mem = 250146816 (238MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: date 11/05/08, BIOS32 rev. 0 @ 0xfd088
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: pcibios_get_intr_routing - function not supported
> pcibios0: PCI IRQ Routing information unavailable.
> pcibios0: PCI bus #0 is the last bus
> bios0: ROM list: 0xe0000/0xa800
> cpu0 at mainbus0: (uniprocessor)
> mtrr: K6-family MTRR support (2 registers)
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
> glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
> vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address 00:0d:b9:32:4c:a0
> ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034
> vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: can't map interrupt
> vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: can't map interrupt
> glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit 3579545Hz timer, watchdog, gpio, i2c
> gpio0 at glxpcib0: 32 pins
> iic0 at glxpcib0
> maxtmp0 at iic0 addr 0x4c: lm86
> pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <SDCFHS-008G>
> wd0: 1-sector PIO, LBA48, 7647MB, 15662304 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
> pciide0: channel 1 ignored (disabled)
> ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 12, version 1.0, legacy support
> ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 12
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
> isa0 at glxpcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> usb1 at ohci0: USB revision 1.0
> uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
> nvram: invalid checksum
> vscsi0 at root
> scsibus1 at vscsi0: 256 targets
> softraid0 at root
> scsibus2 at softraid0: 256 targets
> root on wd0a (c20bb005d7d65410.a) swap on wd0b dump on wd0b
> clock: unknown CMOS layout

Hello,
not sure if it helps, but I have no problems with 6.0-stable (mtier..) on my
2d13.

dmesg:

OpenBSD 6.0 (GENERIC) #2: Mon Oct 17 22:43:38 CEST 2016
    [hidden email]:/binpatchng/work-binpatch60-i386/src/sys/arch/i386/compile/GENERIC
cpu0: Geode(TM) Integrated Processor by AMD PCS ("AuthenticAMD" 586-class) 499 MHz
cpu0: FPU,DE,PSE,TSC,MSR,CX8,SEP,PGE,CMOV,CFLUSH,MMX,MMXX,3DNOW2,3DNOW
real mem  = 267931648 (255MB)
avail mem = 250146816 (238MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: date 11/05/08, BIOS32 rev. 0 @ 0xfd088
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: pcibios_get_intr_routing - function not supported
pcibios0: PCI IRQ Routing information unavailable.
pcibios0: PCI bus #0 is the last bus
bios0: ROM list: 0xe0000/0xa800
cpu0 at mainbus0: (uniprocessor)
mtrr: K6-family MTRR support (2 registers)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 1 function 0 "AMD Geode LX" rev 0x33
glxsb0 at pci0 dev 1 function 2 "AMD Geode LX Crypto" rev 0x00: RNG AES
vr0 at pci0 dev 9 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 10, address 00:0d:b9:26:50:88
ukphy0 at vr0 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034
vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 11, address 00:0d:b9:26:50:89
ukphy1 at vr1 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034
vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: irq 15, address 00:0d:b9:26:50:8a
ukphy2 at vr2 phy 1: Generic IEEE 802.3u media interface, rev. 3: OUI 0x004063, model 0x0034
glxpcib0 at pci0 dev 15 function 0 "AMD CS5536 ISA" rev 0x03: rev 3, 32-bit 3579545Hz timer, watchdog, gpio, i2c
gpio0 at glxpcib0: 32 pins
iic0 at glxpcib0
maxtmp0 at iic0 addr 0x4c: lm86
pciide0 at pci0 dev 15 function 2 "AMD CS5536 IDE" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TS4GCF133>
wd0: 1-sector PIO, LBA, 3823MB, 7831152 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 ignored (disabled)
ohci0 at pci0 dev 15 function 4 "AMD CS5536 USB" rev 0x02: irq 12, version 1.0, legacy support
ehci0 at pci0 dev 15 function 5 "AMD CS5536 USB" rev 0x02: irq 12
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
isa0 at glxpcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "AMD OHCI root hub" rev 1.00/1.00 addr 1
nvram: invalid checksum
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
root on wd0a (1ddb639fec2b5635.a) swap on wd0b dump on wd0b
clock: unknown CMOS layout

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: can't map interrupt on alix2d13 with 6.0-stable

Dimitris Papastamos
In reply to this post by Dimitris Papastamos
Below is the pcidump output.

The interrupt line for 0:10:0: and 0:11:0: (vr1 and vr2) seems to be
0xff which doesn't look right.

Domain /dev/pci0:
 0:1:0: AMD Geode LX
        0x0000: Vendor ID: 1022 Product ID: 2080
        0x0004: Command: 0005 Status: 0220
        0x0008: Class: 06 Subclass: 00 Interface: 00 Revision: 33
        0x000c: BIST: 00 Header Type: 80 Latency Timer: f8 Cache Line Size: 08
        0x0010: BAR io addr: 0x0000ac1c/0x0004
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1022 Product ID: 2080
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
        0x0000: 20801022 02200005 06000033 0080f808
        0x0010: 0000ac1d 00000000 00000000 00000000
        0x0020: 00000000 00000000 00000000 20801022
        0x0030: 00000000 00000000 00000000 00000000
        0x0040: 00000000 00000000 00000000 00000000
        0x0050: 00000000 00000000 00000000 00000000
        0x0060: 00000000 00000000 00000000 00000000
        0x0070: 00000000 00000000 00000000 00000000
        0x0080: 00000000 00000000 00000000 00000000
        0x0090: 00000000 00000000 00000000 00000000
        0x00a0: 00000000 00000000 00000000 00000000
        0x00b0: 00000000 00000000 00000000 00000000
        0x00c0: 00000000 00000000 00000000 00000000
        0x00d0: 00000000 00000000 00000000 00000000
        0x00e0: 00000000 00000000 00000000 00000000
        0x00f0: 00000000 00000000 00000000 00000000
 0:1:2: AMD Geode LX Crypto
        0x0000: Vendor ID: 1022 Product ID: 2082
        0x0004: Command: 0006 Status: 02a0
        0x0008: Class: 10 Subclass: 10 Interface: 00 Revision: 00
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 08
        0x0010: BAR mem 32bit addr: 0xefff4000/0x00004000
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1022 Product ID: 2082
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 09 Min Gnt: 00 Max Lat: 00
        0x0000: 20821022 02a00006 10100000 00000008
        0x0010: efff4000 00000000 00000000 00000000
        0x0020: 00000000 00000000 00000000 20821022
        0x0030: 00000000 00000000 00000000 00000109
        0x0040: 00000000 00000000 00000000 00000000
        0x0050: 00000000 00000000 00000000 00000000
        0x0060: 00000000 00000000 00000000 00000000
        0x0070: 00000000 00000000 00000000 00000000
        0x0080: 00000000 00000000 00000000 00000000
        0x0090: 00000000 00000000 00000000 00000000
        0x00a0: 00000000 00000000 00000000 00000000
        0x00b0: 00000000 00000000 00000000 00000000
        0x00c0: 00000000 00000000 00000000 00000000
        0x00d0: 00000000 00000000 00000000 00000000
        0x00e0: 00000000 00000000 00000000 00000000
        0x00f0: 00000000 00000000 00000000 00000000
 0:9:0: VIA VT6105M RhineIII
        0x0000: Vendor ID: 1106 Product ID: 3053
        0x0004: Command: 0097 Status: 0210
        0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 96
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 08
        0x0010: BAR io addr: 0x00001000/0x0100
        0x0014: BAR mem 32bit addr: 0xe0000000/0x00000100
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1106 Product ID: 0106
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: 0a Min Gnt: 03 Max Lat: 08
        0x0040: Capability 0x01: Power Management
                State: D0
        0x0000: 30531106 02100097 02000096 00000008
        0x0010: 00001001 e0000000 00000000 00000000
        0x0020: 00000000 00000000 00000000 01061106
        0x0030: 00000000 00000040 00000000 0803010a
        0x0040: fe020001 00000000 00000000 00000000
        0x0050: 04000000 00000000 00000000 00000000
        0x0060: 00000000 00000000 00000000 00000000
        0x0070: 00000000 00000000 00000000 00000000
        0x0080: 00000000 00000000 00000000 00000000
        0x0090: 00000000 00000000 00000000 00000000
        0x00a0: 00000000 00000000 00000000 00000000
        0x00b0: 00000000 00000000 00000000 00000000
        0x00c0: 00000000 00000000 00000000 00000000
        0x00d0: 00000000 00000000 00000000 00000000
        0x00e0: 00000000 00000000 00000000 00000000
        0x00f0: 00000000 00000000 00000000 00000000
 0:10:0: VIA VT6105M RhineIII
        0x0000: Vendor ID: 1106 Product ID: 3053
        0x0004: Command: 0097 Status: 0210
        0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 96
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 08
        0x0010: BAR io addr: 0x00001400/0x0100
        0x0014: BAR mem 32bit addr: 0xe0040000/0x00000100
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1106 Product ID: 0106
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 03 Max Lat: 08
        0x0040: Capability 0x01: Power Management
                State: D0
        0x0000: 30531106 02100097 02000096 00000008
        0x0010: 00001401 e0040000 00000000 00000000
        0x0020: 00000000 00000000 00000000 01061106
        0x0030: 00000000 00000040 00000000 080301ff
        0x0040: fe020001 00000000 00000000 00000000
        0x0050: 00000000 00000000 00000000 00000000
        0x0060: 00000000 00000000 00000000 00000000
        0x0070: 00000000 00000000 00000000 00000000
        0x0080: 00000000 00000000 00000000 00000000
        0x0090: 00000000 00000000 00000000 00000000
        0x00a0: 00000000 00000000 00000000 00000000
        0x00b0: 00000000 00000000 00000000 00000000
        0x00c0: 00000000 00000000 00000000 00000000
        0x00d0: 00000000 00000000 00000000 00000000
        0x00e0: 00000000 00000000 00000000 00000000
        0x00f0: 00000000 00000000 00000000 00000000
 0:11:0: VIA VT6105M RhineIII
        0x0000: Vendor ID: 1106 Product ID: 3053
        0x0004: Command: 0097 Status: 0210
        0x0008: Class: 02 Subclass: 00 Interface: 00 Revision: 96
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 08
        0x0010: BAR io addr: 0x00001800/0x0100
        0x0014: BAR mem 32bit addr: 0xe0080000/0x00000100
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1106 Product ID: 0106
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 01 Line: ff Min Gnt: 03 Max Lat: 08
        0x0040: Capability 0x01: Power Management
                State: D0
        0x0000: 30531106 02100097 02000096 00000008
        0x0010: 00001801 e0080000 00000000 00000000
        0x0020: 00000000 00000000 00000000 01061106
        0x0030: 00000000 00000040 00000000 080301ff
        0x0040: fe020001 00000000 00000000 00000000
        0x0050: 00000000 00000000 00000000 00000000
        0x0060: 00000000 00000000 00000000 00000000
        0x0070: 00000000 00000000 00000000 00000000
        0x0080: 00000000 00000000 00000000 00000000
        0x0090: 00000000 00000000 00000000 00000000
        0x00a0: 00000000 00000000 00000000 00000000
        0x00b0: 00000000 00000000 00000000 00000000
        0x00c0: 00000000 00000000 00000000 00000000
        0x00d0: 00000000 00000000 00000000 00000000
        0x00e0: 00000000 00000000 00000000 00000000
        0x00f0: 00000000 00000000 00000000 00000000
 0:15:0: AMD CS5536 ISA
        0x0000: Vendor ID: 1022 Product ID: 2090
        0x0004: Command: 0009 Status: 02a0
        0x0008: Class: 06 Subclass: 01 Interface: 00 Revision: 03
        0x000c: BIST: 00 Header Type: 80 Latency Timer: 40 Cache Line Size: 08
        0x0010: BAR io addr: 0x00006000/0x0008
        0x0014: BAR io addr: 0x00006100/0x0100
        0x0018: BAR io addr: 0x00006200/0x0040
        0x001c: BAR io addr: 0x00000000/0x0000
        0x0020: BAR io addr: 0x00009d00/0x0080
        0x0024: BAR io addr: 0x00009c00/0x0040
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1022 Product ID: 2090
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
        0x0000: 20901022 02a00009 06010003 00804008
        0x0010: 00006001 00006101 00006201 00000001
        0x0020: 00009d01 00009c01 00000000 20901022
        0x0030: 00000000 00000000 00000000 00000000
        0x0040: 00000000 00000000 00000000 00000000
        0x0050: 00000000 00000000 00000000 00000000
        0x0060: 00000000 00000000 00000000 00000000
        0x0070: 00000000 00000000 00000000 00000000
        0x0080: 00000000 00000000 00000000 00000000
        0x0090: 00000000 00000000 00000000 00000000
        0x00a0: 00000000 00000000 00000000 00000000
        0x00b0: 00000000 00000000 00000000 00000000
        0x00c0: 00000000 00000000 00000000 00000000
        0x00d0: 00000000 00000000 00000000 00000000
        0x00e0: 00000000 00000000 00000000 00000000
        0x00f0: 00000000 00000000 00000000 00000000
 0:15:2: AMD CS5536 IDE
        0x0000: Vendor ID: 1022 Product ID: 209a
        0x0004: Command: 0005 Status: 02a0
        0x0008: Class: 01 Subclass: 01 Interface: 80 Revision: 01
        0x000c: BIST: 00 Header Type: 00 Latency Timer: f8 Cache Line Size: 08
        0x0010: BAR empty (00000000)
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR io addr: 0x0000ff00/0x0010
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1022 Product ID: 209a
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 00 Line: 00 Min Gnt: 00 Max Lat: 00
        0x0000: 209a1022 02a00005 01018001 0000f808
        0x0010: 00000000 00000000 00000000 00000000
        0x0020: 0000ff01 00000000 00000000 209a1022
        0x0030: 00000000 00000000 00000000 00000000
        0x0040: 00000002 00000000 20000000 20000000
        0x0050: c0000000 00000000 00000000 00000000
        0x0060: 00000000 00000000 00000000 00000000
        0x0070: 00000000 00000000 00000000 00000000
        0x0080: 00000000 00000000 00000000 00000000
        0x0090: 00000000 00000000 00000000 00000000
        0x00a0: 00000000 00000000 00000000 00000000
        0x00b0: 00000000 00000000 00000000 00000000
        0x00c0: 00000000 00000000 00000000 00000000
        0x00d0: 00000000 00000000 00000000 00000000
        0x00e0: 00000000 00000000 00000000 00000000
        0x00f0: 00000000 00000000 00000000 00000000
 0:15:4: AMD CS5536 USB
        0x0000: Vendor ID: 1022 Product ID: 2094
        0x0004: Command: 0006 Status: 0230
        0x0008: Class: 0c Subclass: 03 Interface: 10 Revision: 02
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 08
        0x0010: BAR mem 32bit addr: 0xefffe000/0x00001000
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1022 Product ID: 2094
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 04 Line: 0c Min Gnt: 00 Max Lat: 00
        0x0040: Capability 0x01: Power Management
                State: D0
        0x0000: 20941022 02300006 0c031002 00000008
        0x0010: efffe000 00000000 00000000 00000000
        0x0020: 00000000 00000000 00000000 20941022
        0x0030: 00000000 00000040 00000000 0000040c
        0x0040: c8020001 00000000 00000000 00000000
        0x0050: 00000000 00000000 00000000 00000000
        0x0060: 00000000 00000000 00000000 00000000
        0x0070: 00000000 00000000 00000000 00000000
        0x0080: 00000000 00000000 00000000 00000000
        0x0090: 00000000 00000000 00000000 00000000
        0x00a0: 00000000 00000000 00000000 00000000
        0x00b0: 00000000 00000000 00000000 00000000
        0x00c0: 00000000 00000000 00000000 00000000
        0x00d0: 00000000 00000000 00000000 00000000
        0x00e0: 00000000 00000000 00000000 00000000
        0x00f0: 00000000 00000000 00000000 00000000
 0:15:5: AMD CS5536 USB
        0x0000: Vendor ID: 1022 Product ID: 2095
        0x0004: Command: 0006 Status: 0230
        0x0008: Class: 0c Subclass: 03 Interface: 20 Revision: 02
        0x000c: BIST: 00 Header Type: 00 Latency Timer: 00 Cache Line Size: 08
        0x0010: BAR mem 32bit addr: 0xefffd000/0x00001000
        0x0014: BAR empty (00000000)
        0x0018: BAR empty (00000000)
        0x001c: BAR empty (00000000)
        0x0020: BAR empty (00000000)
        0x0024: BAR empty (00000000)
        0x0028: Cardbus CIS: 00000000
        0x002c: Subsystem Vendor ID: 1022 Product ID: 2095
        0x0030: Expansion ROM Base Address: 00000000
        0x0038: 00000000
        0x003c: Interrupt Pin: 04 Line: 0c Min Gnt: 00 Max Lat: 00
        0x0040: Capability 0x01: Power Management
                State: D0
        0x0000: 20951022 02300006 0c032002 00000008
        0x0010: efffd000 00000000 00000000 00000000
        0x0020: 00000000 00000000 00000000 20951022
        0x0030: 00000000 00000040 00000000 0000040c
        0x0040: c8020001 00000000 00000000 00000000
        0x0050: 00000001 00000000 00000000 00000000
        0x0060: 00002020 00000000 00000000 00000000
        0x0070: 00000000 00000000 00000000 00000000
        0x0080: 00000000 00000000 00000000 00000000
        0x0090: 00000000 00000000 00000000 00000000
        0x00a0: 00000000 00000000 00000000 00000000
        0x00b0: 00000000 00000000 00000000 00000000
        0x00c0: 00000000 00000000 00000000 00000000
        0x00d0: 00000000 00000000 00000000 00000000
        0x00e0: 00000000 00000000 00000000 00000000
        0x00f0: 00000000 00000000 00000000 00000000

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: can't map interrupt on alix2d13 with 6.0-stable

Stuart Henderson
In reply to this post by Dimitris Papastamos
On 2017/02/21 11:30, Dimitris Papastamos wrote:

> Hi,
>
> I have an alix2d13 and running 6.0-stable on it.
>
> I get this in dmesg:
>
> vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: can't map interrupt
> vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: can't map interrupt
>
> I think vr1 should map to irq 11 and vr2 to irq 15.

No idea what to do with the answer, but I wonder if there's any difference
between cold startup and a reboot.

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: can't map interrupt on alix2d13 with 6.0-stable

Dimitris Papastamos
On Tue, Feb 21, 2017 at 12:03:06PM +0000, Stuart Henderson wrote:

> On 2017/02/21 11:30, Dimitris Papastamos wrote:
> > Hi,
> >
> > I have an alix2d13 and running 6.0-stable on it.
> >
> > I get this in dmesg:
> >
> > vr1 at pci0 dev 10 function 0 "VIA VT6105M RhineIII" rev 0x96: can't map interrupt
> > vr2 at pci0 dev 11 function 0 "VIA VT6105M RhineIII" rev 0x96: can't map interrupt
> >
> > I think vr1 should map to irq 11 and vr2 to irq 15.
>
> No idea what to do with the answer, but I wonder if there's any difference
> between cold startup and a reboot.

I have tried a cold boot with the same results.  I am starting to
wonder whether the board is problematic.

Reply | Threaded
Open this post in threaded view
|  
Report Content as Inappropriate

Re: can't map interrupt on alix2d13 with 6.0-stable

Dimitris Papastamos
In reply to this post by Dimitris Papastamos
Mystery solved, I flashed the bios using FreeDOS and networking
works fine now.

Previously I used flashrom in securelevel -1, not sure what went
wrong there...

Loading...