booting 5.6-beta on MacMini

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

booting 5.6-beta on MacMini

Jan Stary
This is an upgrade to 5.6-beta on a MacMini (see dmesg bellow).
It gets through the OpenFirmware stage fine, even automatically,
after I specified

        setenv auto-boot? true
        setenv boot-device hd:,ofwboot
        reset-all

Then:

>> OpenBSD/macppc BOOT 1.3
/pci@f4000000/ata-6@d/disk@1:/etc/boot.conf: line too long


It seems that BOOT attempts to load /bsd from 'disk@1'.
That's not the disk, that's the CD (says devalias).
Strangely, the CD is not present in the dmesg.

The disk is 'disk@0'. Once I specify

        boot hd:/bsd

on the boot> prompt, it boots just fine, recognizing
bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd

I remember having a similar problem with this machine in the past.
In the meantime I disassemled and reassemled the machine (to get
the bwi out, unrelated); possibly I connected the CD wrong.
But anyway, the BOOT seems to be confused about what the disk is.
How can I help debug this?

        Thank you

                Jan



[ using 560188 bytes of bsd ELF symbol table ]
console out [ATY,RockHopper2_A]console in [keyboard] , using USB
using parent ATY,RockHopper2Paren:: memaddr 98000000 size 8000000, : consaddr 9c008000, : ioaddr 90020000, size 20000: width 1280 linebytes 1280 height 1024 depth 8
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2014 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 5.6-beta (GENERIC) #157: Fri Jul 25 14:56:58 MDT 2014
    [hidden email]:/usr/src/sys/arch/macppc/compile/GENERIC
real mem = 1073741824 (1024MB)
avail mem = 1030475776 (982MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root: model PowerMac10,2
cpu0 at mainbus0: 7447A (Revision 0x102): 1499 MHz: 512KB L2 cache
mem0 at mainbus0
spdmem0 at mem0: 1GB DDR SDRAM non-parity PC3200CL3.0
memc0 at mainbus0: uni-n rev 0xd2
"hw-clock" at memc0 not configured
kiic0 at memc0 offset 0xf8001000
iic0 at kiic0
mpcpcibr0 at mainbus0 pci: uni-north
pci0 at mpcpcibr0 bus 0
pchb0 at pci0 dev 11 function 0 "Apple UniNorth AGP" rev 0x00
radeondrm0 at pci0 dev 16 function 0 "ATI Radeon 9200" rev 0x01
drm0 at radeondrm0
radeondrm0: irq 48
mpcpcibr1 at mainbus0 pci: uni-north
pci1 at mpcpcibr1 bus 0
macobio0 at pci1 dev 23 function 0 "Apple Intrepid" rev 0x00
openpic0 at macobio0 offset 0x40000: version 0x4614 feature 3f0302 LE
macgpio0 at macobio0 offset 0x50
"modem-reset" at macgpio0 offset 0x1d not configured
"modem-power" at macgpio0 offset 0x1c not configured
macgpio1 at macgpio0 offset 0x9: irq 47
"programmer-switch" at macgpio0 offset 0x11 not configured
"gpio5" at macgpio0 offset 0x6f not configured
"gpio6" at macgpio0 offset 0x70 not configured
"extint-gpio15" at macgpio0 offset 0x67 not configured
"escc-legacy" at macobio0 offset 0x12000 not configured
zsc0 at macobio0 offset 0x13000: irq 22,23
zstty0 at zsc0 channel 0
zstty1 at zsc0 channel 1
aoa0 at macobio0 offset 0x10000: irq 30,1,2
audio0 at aoa0
"timer" at macobio0 offset 0x15000 not configured
adb0 at macobio0 offset 0x16000
apm0 at adb0: battery flags 0x0, 0% charged
piic0 at adb0
iic1 at piic0
maxtmp0 at iic1 addr 0xc8: max6642
kiic1 at macobio0 offset 0x18000
iic2 at kiic1
wdc0 at macobio0 offset 0x20000 irq 24: DMA
ohci0 at pci1 dev 26 function 0 "Apple Intrepid USB" rev 0x00: irq 29, version 1.0, legacy support
ohci1 at pci1 dev 27 function 0 "NEC USB" rev 0x43: irq 63, version 1.0
ohci2 at pci1 dev 27 function 1 "NEC USB" rev 0x43: irq 63, version 1.0
ehci0 at pci1 dev 27 function 2 "NEC USB" rev 0x04: irq 63
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "NEC EHCI root hub" rev 2.00/1.00 addr 1
usb1 at ohci0: USB revision 1.0
uhub1 at usb1 "Apple OHCI root hub" rev 1.00/1.00 addr 1
usb2 at ohci1: USB revision 1.0
uhub2 at usb2 "NEC OHCI root hub" rev 1.00/1.00 addr 1
usb3 at ohci2: USB revision 1.0
uhub3 at usb3 "NEC OHCI root hub" rev 1.00/1.00 addr 1
mpcpcibr2 at mainbus0 pci: uni-north
pci2 at mpcpcibr2 bus 0
kauaiata0 at pci2 dev 13 function 0 "Apple Intrepid ATA" rev 0x00
wdc1 at kauaiata0 irq 39: DMA
wd0 at wdc1 channel 0 drive 0: <ST9808211A>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(wdc1:0:0): using PIO mode 4, DMA mode 2, Ultra-DMA mode 5
"Apple UniNorth Firewire" rev 0x81 at pci2 dev 14 function 0 not configured
gem0 at pci2 dev 15 function 0 "Apple Uni-N2 GMAC" rev 0x80: irq 41, address 00:14:51:17:42:34
bmtphy0 at gem0 phy 0: BCM5221 100baseTX PHY, rev. 4
uhidev0 at uhub2 port 1 configuration 1 interface 0 "Chicony USB Keyboard" rev 1.10/1.02 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd0 at ukbd0: console keyboard
uhidev1 at uhub2 port 1 configuration 1 interface 1 "Chicony USB Keyboard" rev 1.10/1.02 addr 2
uhidev1: iclass 3/0, 3 report ids
uhid0 at uhidev1 reportid 1: input=1, output=0, feature=0
uhid1 at uhidev1 reportid 2: input=1, output=0, feature=2
uhid2 at uhidev1 reportid 3: input=3, output=0, feature=0
uhidev2 at uhub3 port 1 configuration 1 interface 0 "Logitech Optical USB Mouse" rev 2.00/3.40 addr 2
uhidev2: iclass 3/1
ums0 at uhidev2: 3 buttons, Z dir
wsmouse0 at ums0 mux 0
vscsi0 at root
scsibus1 at vscsi0: 256 targets
softraid0 at root
scsibus2 at softraid0: 256 targets
bootpath: /pci@f4000000/ata-6@d/disk@0:/bsd
root on wd0a (d2e7005f40cdabc7.a) swap on wd0b dump on wd0b
drm: initializing kernel modesetting (RV280 0x1002:0x5962 0x1002:0x5962).
error: [drm:pid0:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
drm: Using device-tree clock info
radeondrm0: VRAM: 128M 0x0000000098000000 - 0x000000009FFFFFFF (64M used)
trying to bind memory to uninitialized GART !
error: [drm:pid0:radeon_ttm_backend_bind] *ERROR* failed to bind 1 pages at 0x00000000
error: [drm:pid0:radeon_wb_init] *ERROR* (-22) create WB bo failed
error: [drm:pid0:r100_init] *ERROR* Disabling GPU acceleration
drm: radeon: cp finalized
drm: radeon: cp finalized
Finalizing pool allocator
ttm_pool_mm_shrink_fini stub
drm: Zone  kernel: Used memory at exit: 0 kiB
drm: radeon: ttm finalized
drm: Forcing AGP to PCI mode
error: [drm:pid0:radeon_get_bios] *ERROR* Unable to locate a BIOS ROM
drm: Using device-tree clock info
radeondrm0: VRAM: 128M 0x0000000098000000 - 0x000000009FFFFFFF (64M used)
radeondrm0: GTT: 512M 0x0000000078000000 - 0x0000000097FFFFFF
drm: PCI GART of 512M enabled (table at 0x0000000002947000).
error: [drm:pid0:r100_cp_init_microcode] *ERROR* radeon_cp: Failed to load firmware "radeon-r200_cp"
error: [drm:pid0:r100_cp_init] *ERROR* Failed to load firmware!
error: [drm:pid0:r100_startup] *ERROR* failed initializing CP (-2).
error: [drm:pid0:r100_init] *ERROR* Disabling GPU acceleration
drm: radeon: cp finalized
drm: Connector Table: 6 (mini external tmds)
drm: No valid Ext TMDS info found in BIOS
drm: No TV DAC info found in BIOS
radeon_i2c_put_byte stub
radeon_i2c_put_byte stub
radeon_i2c_put_byte stub
radeon_i2c_put_byte stub
radeon_i2c_put_byte stub
radeondrm0: 1280x1024
wsdisplay0 at radeondrm0 mux 1: console (std, vt100 emulation), using wskbd0
wsdisplay0: screen 1-5 added (std, vt100 emulation)