bioctl output

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

bioctl output

John Nietzsche
Dear users,

i have just installed openbsd 4.3 in my dell server and everything
went ok except for on stuff that is teasing me up. It's the bioctl
output:

robigo# bioctl mfi0
Volume  Status               Size Device
 mfi0 0 Online       299439751168 sd0     RAID1
      0 Online       300000000000 1:0.0   noencl <SEAGATE ST3300655SS     S527>
      1 Online       300000000000 1:1.0   noencl <SEAGATE ST3300655SS     S527>
 mfi0 1 Online       898319253504 sd1     RAID5
      0 Online       300000000000 1:2.0   noencl <SEAGATE ST3300655SS     S527>
      1 Online       300000000000 1:3.0   noencl <SEAGATE ST3300655SS     S527>
      2 Online       300000000000 1:4.0   noencl <SEAGATE ST3300655SS     S527>
      3 Online       300000000000 1:5.0   noencl <SEAGATE ST3300655SS     S527>
 mfi0 2 Hot spare       292968750 1:6.0   noencl <SEAGATE ST3300655SS     S527>
robigo#

Below the  RAIDX type column i am seeing "noencl". How can i change that?

BTW: i am running on a Dell PowerEdge 2900.

Thanks in advance.

Reply | Threaded
Open this post in threaded view
|

Re: bioctl output

François Chambaud-2
"John Nietzsche" <[hidden email]> writes:

> Dear users,
>
> i have just installed openbsd 4.3 in my dell server and everything
> went ok except for on stuff that is teasing me up. It's the bioctl
> output:
>
> robigo# bioctl mfi0
> Volume  Status               Size Device
>  mfi0 0 Online       299439751168 sd0     RAID1
>       0 Online       300000000000 1:0.0   noencl <SEAGATE ST3300655SS     S527>
>       1 Online       300000000000 1:1.0   noencl <SEAGATE ST3300655SS     S527>
>  mfi0 1 Online       898319253504 sd1     RAID5
>       0 Online       300000000000 1:2.0   noencl <SEAGATE ST3300655SS     S527>
>       1 Online       300000000000 1:3.0   noencl <SEAGATE ST3300655SS     S527>
>       2 Online       300000000000 1:4.0   noencl <SEAGATE ST3300655SS     S527>
>       3 Online       300000000000 1:5.0   noencl <SEAGATE ST3300655SS     S527>
>  mfi0 2 Hot spare       292968750 1:6.0   noencl <SEAGATE ST3300655SS     S527>
> robigo#
>
> Below the  RAIDX type column i am seeing "noencl". How can i change that?
>
> BTW: i am running on a Dell PowerEdge 2900.
>
> Thanks in advance.
>
>
>

"noencl" for "no enclosure".

See ses(4) and read the thread "RAID management support coming in
OpenBSD 3.8" from Theo de Raadt:

http://marc.info/?l=openbsd-misc&m=112630095818062

Please post a full "dmesg" of your Dell PowerEdge 2900.

--
Francois Chambaud
http://www.chambaud.org

Reply | Threaded
Open this post in threaded view
|

Re: bioctl output

John Nietzsche
OpenBSD 4.3-stable (DPE-2900.MP) #4: Thu Jul 24 14:50:29 BRT 2008
    [hidden email]:/usr/src/sys/arch/amd64/compile/DPE-2900.MP
real mem = 3484352512 (3322MB)
avail mem = 3373080576 (3216MB)
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.5 @ 0xcfb9c000 (66 entries)
bios0: vendor Dell Inc. version "2.2.6" date 02/05/2008
bios0: Dell Inc. PowerEdge 2900
acpi0 at bios0: rev 2
acpi0: tables DSDT FACP APIC SPCR HPET MCFG WD__ SLIC ERST HEST BERT EINJ
TCPA
acpi0: wakeup devices PCI0(S5)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpi device at acpi0 from table DSDT not configured
acpi device at acpi0 from table FACP not configured
acpimadt0 at acpi0 table APIC addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.85 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR,NXE,LONG
cpu0: 6MB 64b/line 16-way L2 cache
cpu0: apic clock running at 332MHz
cpu1 at mainbus0: apid 4 (application processor)
cpu1: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.50 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR,NXE,LONG
cpu1: 6MB 64b/line 16-way L2 cache
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.50 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR,NXE,LONG
cpu2: 6MB 64b/line 16-way L2 cache
cpu3 at mainbus0: apid 6 (application processor)
cpu3: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.50 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR,NXE,LONG
cpu3: 6MB 64b/line 16-way L2 cache
cpu4 at mainbus0: apid 1 (application processor)
cpu4: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.50 MHz
cpu4:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR,NXE,LONG
cpu4: 6MB 64b/line 16-way L2 cache
cpu5 at mainbus0: apid 5 (application processor)
cpu5: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.50 MHz
cpu5:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR,NXE,LONG
cpu5: 6MB 64b/line 16-way L2 cache
cpu6 at mainbus0: apid 3 (application processor)
cpu6: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.50 MHz
cpu6:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR,NXE,LONG
cpu6: 6MB 64b/line 16-way L2 cache
cpu7 at mainbus0: apid 7 (application processor)
cpu7: Intel(R) Xeon(R) CPU E5410 @ 2.33GHz, 2327.50 MHz
cpu7:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR,NXE,LONG
cpu7: 6MB 64b/line 16-way L2 cache
ioapic0 at mainbus0 apid 8 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 8
ioapic1 at mainbus0 apid 9 pa 0xfec80000, version 20, 24 pins
ioapic1: misconfigured as apic 0, remapped to apid 9
acpi device at acpi0 from table SPCR not configured
acpihpet0 at acpi0 table HPET: 14318179 Hz
acpi device at acpi0 from table MCFG not configured
acpi device at acpi0 from table WD__ not configured
acpi device at acpi0 from table SLIC not configured
acpi device at acpi0 from table ERST not configured
acpi device at acpi0 from table HEST not configured
acpi device at acpi0 from table BERT not configured
acpi device at acpi0 from table EINJ not configured
acpi device at acpi0 from table TCPA not configured
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 4 (PEX2)
acpiprt2 at acpi0: bus 5 (UPST)
acpiprt3 at acpi0: bus 6 (DWN1)
acpiprt4 at acpi0: bus 8 (DWN2)
acpiprt5 at acpi0: bus 9 (PE2X)
acpiprt6 at acpi0: bus 10 (PEX3)
acpiprt7 at acpi0: bus 11 (PEX4)
acpiprt8 at acpi0: bus 1 (PEX5)
acpiprt9 at acpi0: bus 0 (PE2P)
acpiprt9: no apic found for irq 128
acpiprt9: no apic found for irq 129
acpiprt9: no apic found for irq 142
acpiprt10 at acpi0: bus 12 (PEX6)
acpiprt11 at acpi0: bus 2 (SBEX)
acpiprt12 at acpi0: bus 14 (COMP)
acpicpu0 at acpi0: C3
acpicpu1 at acpi0: C3
acpicpu2 at acpi0: C3
acpicpu3 at acpi0: C3
acpicpu4 at acpi0: C3
acpicpu5 at acpi0: C3
acpicpu6 at acpi0: C3
acpicpu7 at acpi0: C3
ipmi at mainbus0 not configured
cpu0: unknown i686 model 7, can't get bus clockcpu0: EST: unknown
system bus clock
pci0 at mainbus0 bus 0: configuration mode 1
pchb0 at pci0 dev 0 function 0 "Intel 5000X Host" rev 0x12
ppb0 at pci0 dev 2 function 0 "Intel 5000 PCIE" rev 0x12
pci1 at ppb0 bus 4
ppb1 at pci1 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci2 at ppb1 bus 5
ppb2 at pci2 dev 0 function 0 "Intel 6321ESB PCIE" rev 0x01
pci3 at ppb2 bus 6
ppb3 at pci3 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci4 at ppb3 bus 7
bnx0 at pci4 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int
16 (irq 10)
ppb4 at pci2 dev 1 function 0 "Intel 6321ESB PCIE" rev 0x01: apic 8
int 16 (irq 0)
pci5 at ppb4 bus 8
ppb5 at pci1 dev 0 function 3 "Intel 6321ESB PCIE-PCIX" rev 0x01
pci6 at ppb5 bus 9
ppb6 at pci0 dev 3 function 0 "Intel 5000 PCIE" rev 0x12: apic 8 int 16 (irq
0)
pci7 at ppb6 bus 10
ppb7 at pci0 dev 4 function 0 "Intel 5000 PCIE" rev 0x12: apic 8 int 16 (irq
0)
pci8 at ppb7 bus 11
ppb8 at pci0 dev 5 function 0 "Intel 5000 PCIE" rev 0x12
pci9 at ppb8 bus 1
mfi0 at pci9 dev 0 function 0 "Symbios Logic SAS1078" rev 0x04: apic 8
int 16 (irq 10), Dell PERC 6/i integrated
mfi0: logical drives 2, version 6.0.2-0002, 256MB RAM
scsibus0 at mfi0: 2 targets
sd0 at scsibus0 targ 0 lun 0: <DELL, PERC 6/i, 1.11> SCSI3 0/direct fixed
sd0: 285568MB, 36404 cyl, 255 head, 63 sec, 512 bytes/sec, 584843264 sec
total
sd1 at scsibus0 targ 1 lun 0: <DELL, PERC 6/i, 1.11> SCSI3 0/direct fixed
sd1: 856704MB, 109214 cyl, 255 head, 63 sec, 512 bytes/sec, 1754529792 sec
total
ppb9 at pci0 dev 6 function 0 "Intel 5000 PCIE x8" rev 0x12: apic 8
int 16 (irq 0)
pci10 at ppb9 bus 12
ppb10 at pci0 dev 7 function 0 "Intel 5000 PCIE" rev 0x12
pci11 at ppb10 bus 13
pchb1 at pci0 dev 16 function 0 "Intel 5000 Error Reporting" rev 0x12
pchb2 at pci0 dev 16 function 1 "Intel 5000 Error Reporting" rev 0x12
pchb3 at pci0 dev 16 function 2 "Intel 5000 Error Reporting" rev 0x12
pchb4 at pci0 dev 17 function 0 "Intel 5000 Reserved" rev 0x12
pchb5 at pci0 dev 19 function 0 "Intel 5000 Reserved" rev 0x12
pchb6 at pci0 dev 21 function 0 "Intel 5000 FBD" rev 0x12
pchb7 at pci0 dev 22 function 0 "Intel 5000 FBD" rev 0x12
ppb11 at pci0 dev 28 function 0 "Intel 6321ESB PCIE" rev 0x09
pci12 at ppb11 bus 2
ppb12 at pci12 dev 0 function 0 "ServerWorks PCIE-PCIX" rev 0xc3
pci13 at ppb12 bus 3
bnx1 at pci13 dev 0 function 0 "Broadcom BCM5708" rev 0x12: apic 8 int
16 (irq 10)
uhci0 at pci0 dev 29 function 0 "Intel 6321ESB USB" rev 0x09: apic 8
int 21 (irq 15)
uhci1 at pci0 dev 29 function 1 "Intel 6321ESB USB" rev 0x09: apic 8
int 20 (irq 14)
uhci2 at pci0 dev 29 function 2 "Intel 6321ESB USB" rev 0x09: apic 8
int 21 (irq 15)
uhci3 at pci0 dev 29 function 3 "Intel 6321ESB USB" rev 0x09: apic 8
int 20 (irq 14)
ehci0 at pci0 dev 29 function 7 "Intel 6321ESB USB" rev 0x09: apic 8
int 21 (irq 15)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb13 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xd9
pci14 at ppb13 bus 14
vga0 at pci14 dev 13 function 0 "ATI ES1000" rev 0x02
wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 31 function 0 "Intel 6321ESB LPC" rev 0x09
pciide0 at pci0 dev 31 function 2 "Intel 6321ESB SATA" rev 0x09: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 8 int 23 (irq 11) for native-PCI interrupt
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD-ROM GDRH20N, 0D04> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
midi0 at pcppi0: <PC speaker>
uhub5 at uhub0 port 7 "Cypress Semiconductor USB2 Hub" rev 2.00/0.0b addr 2
uhidev0 at uhub3 port 1 configuration 1 interface 0 "Dell Dell USB
Optical Mouse" rev 2.00/43.01 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhidev1 at uhub3 port 2 configuration 1 interface 0 "Dell Dell USB
Keyboard" rev 1.10/3.06 addr 3
uhidev1: iclass 3/1
ukbd0 at uhidev1: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
bnx1: address 00:1e:4f:37:27:39
brgphy0 at bnx1 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6
bnx0: address 00:1e:4f:37:27:3b
brgphy1 at bnx0 phy 1: BCM5708C 10/100/1000baseT PHY, rev. 6


On Thu, Jul 24, 2008 at 4:51 PM, Frangois Chambaud
<[hidden email]> wrote:

> "John Nietzsche" <[hidden email]> writes:
>
>> Dear users,
>>
>> i have just installed openbsd 4.3 in my dell server and everything
>> went ok except for on stuff that is teasing me up. It's the bioctl
>> output:
>>
>> robigo# bioctl mfi0
>> Volume  Status               Size Device
>>  mfi0 0 Online       299439751168 sd0     RAID1
>>       0 Online       300000000000 1:0.0   noencl <SEAGATE ST3300655SS
S527>
>>       1 Online       300000000000 1:1.0   noencl <SEAGATE ST3300655SS
S527>
>>  mfi0 1 Online       898319253504 sd1     RAID5
>>       0 Online       300000000000 1:2.0   noencl <SEAGATE ST3300655SS
S527>
>>       1 Online       300000000000 1:3.0   noencl <SEAGATE ST3300655SS
S527>
>>       2 Online       300000000000 1:4.0   noencl <SEAGATE ST3300655SS
S527>
>>       3 Online       300000000000 1:5.0   noencl <SEAGATE ST3300655SS
S527>
>>  mfi0 2 Hot spare       292968750 1:6.0   noencl <SEAGATE ST3300655SS
S527>

>> robigo#
>>
>> Below the  RAIDX type column i am seeing "noencl". How can i change that?
>>
>> BTW: i am running on a Dell PowerEdge 2900.
>>
>> Thanks in advance.
>>
>>
>>
>
> "noencl" for "no enclosure".
>
> See ses(4) and read the thread "RAID management support coming in
> OpenBSD 3.8" from Theo de Raadt:
>
> http://marc.info/?l=openbsd-misc&m=112630095818062
>
> Please post a full "dmesg" of your Dell PowerEdge 2900.
>
> --
> Francois Chambaud
> http://www.chambaud.org