bce0: timed out disabling ethernet mac

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

bce0: timed out disabling ethernet mac

Bryan Brake
I go through the 3.8 -stable, using the FAQ, and when I get to the
portion about adding my network information, I get the following error
right after I put in my netmask...

                bce0: timed out disabling ethernet mac
                bce0: timed out writing pkt filter ctl

I restarted the system and ended up with the same error again.  So I
booted Windows and downloaded 3.8 -current (as of 24 January 2006), to
see if something may have been updated.  I also downloaded all the .tgz
as well onto a USB stick.  My thinking was that maybe the fully
installed operating system would fix the issue.  Mounted the USB stick
and was able to do an install of -current

Upon installing -current, I still get the same error.  BCE0 works just
fine when I am on windows (using it right now to send this email.  When
booting OpenBSD, there is no activity on the port.

I did get it to work one time.  I used "lynx" to get to google, but then
I re-booted to add openbsd.pbr to be able to dualboot.  After I
restarted and went back into OpenBSD, the NIC did not work after that.

I have done "man 4 bce" and found the following:

"bce%d: timed out writing pkt filter ctl  Failed to add MAC address."

"bce%d: timed out disabling ethernet mac  A problem occurred when
resetting the interface."


My old laptop had this NIC...

bce0 at pci2 dev 1 function 0 "Broadcom BCM4401" rev 0x01: irq 11,
address xx:xx:xx:xx:xx:xx
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0

My new laptop has this NIC...

bce0 at pci2 dev 0 function 0 "Broadcom BCM4401B0" rev 0x02: irq 9,
address xx:xx:xx:xx:xx:xx
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0


Is there anyway to fix this? Is there anything I have overlooked?  I
looked for errata and searched the mail archives back as far as I have
them (sep 05).  But no one seems to have ran into this issue.

full-dmesg below...  It writes the error messages at the bottom of the
dmesg as well.  Every time I boot up.

Is there anyway to manually reset the interface?  I mean, if the system
is having an issue, can I reset it manually from the command line?


Thanks for your help...

Bryan


----------------------------------------------------------------------------------------------------------
OpenBSD 3.9-beta (GENERIC) #593: Tue Jan 24 02:00:54 MST 2006
     [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) M processor 1.86GHz ("GenuineIntel" 686-class)
1.87 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
cpu0: Enhanced SpeedStep 1400 MHz (1356 mV): unknown EST cpu, no changes
possible
real mem  = 1073168384 (1048016K)
avail mem = 972537856 (949744K)
using 4278 buffers containing 53760000 bytes (52500K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(00) BIOS, date 09/19/05, BIOS32 rev. 0 @ 0xffe90
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfb7d0/160 (8 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371 ISA and IDE"
rev 0x00)
pcibios0: PCI bus #3 is the last bus
bios0: ROM list: 0xc0000/0x10000!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915GM/PM/GMS Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82915PM/GM PCIE" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "Nvidia GeForce Go 6800" rev 0xa2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 10
usb1 at uhci1: USB revision 1.0
uhub1 at usb1
uhub1: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub1: 2 ports with 2 removable, self powered
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 9
usb2 at uhci2: USB revision 1.0
uhub2 at usb2
uhub2: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub2: 2 ports with 2 removable, self powered
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 7
usb3 at uhci3: USB revision 1.0
uhub3 at usb3
uhub3: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub3: 2 ports with 2 removable, self powered
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
usb4 at ehci0: USB revision 2.0
uhub4 at usb4
uhub4: Intel EHCI root hub, rev 2.00/1.00, addr 1
uhub4: 8 ports with 8 removable, self powered
ppb1 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci2 at ppb1 bus 2
bce0 at pci2 dev 0 function 0 "Broadcom BCM4401B0" rev 0x02: irq 9,
address xx:xx:xx:xx:xx:xx
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
cbb0 at pci2 dev 1 function 0 "Ricoh 5C476 CardBus" rev 0xb3: irq 7
"Ricoh 5C552 Firewire" rev 0x08 at pci2 dev 1 function 1 not configured
vendor "Ricoh", unknown product 0x0822 (class system unknown subclass
0x05, rev 0x17) at pci2 dev 1 function 2 not configured
iwi0 at pci2 dev 3 function 0 "Intel PRO/Wireless 2915ABG" rev 0x05: irq
10, address xx:xx:xx:xx:xx:xx
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 3 device 0 cacheline 0x0, lattimer 0x20
pcmcia0 at cardslot0
auich0 at pci0 dev 30 function 2 "Intel 82801FB AC97" rev 0x03: irq 11,
ICH6 AC97
ac97: codec id 0x83847650 (SigmaTel STAC9750/51)
ac97: codec features headphone, 20 bit DAC, 20 bit ADC, SigmaTel 3D
audio0 at auich0
"Intel 82801FB Modem" rev 0x03 at pci0 dev 30 function 3 not configured
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03: PM
disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <TOSHIBA MK8026GAX>
wd0: 16-sector PIO, LBA, 76319MB, 156301488 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TSSTcorp, DVD+-RW TS-L532B, DE03> SCSI0
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 10
iic0 at ichiic0
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
npx0 at isa0 port 0xf0/16: using exception 16
biomask effd netmask effd ttymask ffff
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
umass0 at uhub4 port 8 configuration 1 interface 0
umass0: LEXAR MEDIA JUMPDRIVE SPORT, rev 2.00/30.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <LEXAR, JUMPDRIVE SPORT, 1000> SCSI0
0/direct removable
sd0: 991MB, 991 cyl, 64 head, 32 sec, 512 bytes/sec, 2030592 sec total
ugen0 at uhub1 port 1
ugen0: Dell product 0x8103, rev 2.00/24.22, addr 2
uhidev0 at uhub3 port 1 configuration 1 interface 0
uhidev0: Logitech USB RECEIVER, rev 1.10/25.10, addr 2, iclass 3/1
ums0 at uhidev0: 16 buttons and Z dir.
wsmouse1 at ums0 mux 0
dkcsum: wd0 matches BIOS drive 0x80
dkcsum: sd0 matches BIOS drive 0x81
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
bce0: timed out disabling ethernet mac
bce0: timed out writing pkt filter ctl
bce0: timed out writing pkt filter ctl
bce0: timed out disabling ethernet mac
bce0: timed out writing pkt filter ctl
bce0: timed out writing pkt filter ctl
bce0: timed out writing pkt filter ctl
bce0: timed out writing pkt filter ctl