ath and available channels

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

ath and available channels

Antonios Anastasiadis
Hello. I have 2 atheros cm9's in a box and the only channels I can set
are 36,40 and 44.
How can I "unlock" all the channels the card supports? I'm interested
in channels 100-140.
Man ath didn't say anything about it.

Reply | Threaded
Open this post in threaded view
|

Re: ath and available channels

Antonios Anastasiadis
forgot dmesg just in case


OpenBSD 3.9-current (GENERIC) #672: Mon Apr  3 16:15:29 MDT 2006
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel Pentium II ("GenuineIntel" 686-class, 512KB L2 cache) 401 MHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXS
R
real mem  = 66613248 (65052K)
avail mem = 53145600 (51900K)
using 838 buffers containing 3432448 bytes (3352K) of memory
mainbus0 (root)
bios0 at mainbus0: AT/286+(92) BIOS, date 03/04/99, BIOS32 rev. 0 @ 0xfbc00
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 70102 dobusy 1 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0xc07c
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdef0/160 (8 entries)
pcibios0: PCI Exclusive IRQs: 5 10 11 12
pcibios0: PCI Interrupt Router at 000:07:0 ("Intel 82371SB ISA" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0x8000
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82443BX AGP" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82443BX AGP" rev 0x03
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Rage Pro" rev 0x5c
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
pcib0 at pci0 dev 7 function 0 "Intel 82371AB PIIX4 ISA" rev 0x02
pciide0 at pci0 dev 7 function 1 "Intel 82371AB IDE" rev 0x01: DMA,
channel 0 wired t
o compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <QUANTUM FIREBALL ST3.2A>
wd0: 16-sector PIO, LBA, 3079MB, 6306048 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 2
pciide0: channel 1 disabled (no drives)
uhci0 at pci0 dev 7 function 2 "Intel 82371AB USB" rev 0x01: irq 10
usb0 at uhci0: USB revision 1.0
uhub0 at usb0
uhub0: Intel UHCI root hub, rev 1.00/1.00, addr 1
uhub0: 2 ports with 2 removable, self powered
piixpm0 at pci0 dev 7 function 3 "Intel 82371AB Power" rev 0x02: polling
iic0 at piixpm0
xl0 at pci0 dev 14 function 0 "3Com 3c905B 100Base-TX" rev 0x30: irq
11, address 00:5
0:04:34:3b:2d
exphy0 at xl0 phy 24: 3Com internal media interface
ppb1 at pci0 dev 16 function 0 vendor "Hint", unknown product 0x0021 rev 0x15
pci2 at ppb1 bus 2
ath0 at pci2 dev 8 function 0 "Atheros AR5212" rev 0x01: irq 12
ath0: AR5213 5.9 phy 4.3 rf5112 3.6, FCC2A*, address 00:0b:6b:4d:58:60
ath1 at pci2 dev 9 function 0 "Atheros AR5212" rev 0x01: irq 5
ath1: AR5213 5.9 phy 4.3 rf5112 3.6, FCC2A*, address 00:0b:6b:35:e3:5a
eap0 at pci0 dev 20 function 0 "Ensoniq AudioPCI97" rev 0x06: irq 5
ac97: codec id 0x54524103 (TriTech Microelectronics TR28023)
audio0 at eap0
midi0 at eap0: <AudioPCI MIDI UART>
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi1 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: using exception 16
pccom0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
biomask e74d netmask ff6d ttymask ffef
pctr: 686-class user-level performance counters enabled
mtrr: Pentium Pro MTRR support
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302