apu2 em0/dhclient problems

classic Classic list List threaded Threaded
7 messages Options
Reply | Threaded
Open this post in threaded view
|

apu2 em0/dhclient problems

Edgar Pettijohn III-2
I'm trying to replace my dieing soekris box with an apu2 dmesg below.
However, I can't seem to get em0 to connect to my isp. It will work
when connecting to the soekris box though. So I don't think its the
interface that is the problem. But everything I try seems to rule out
eachother as the problem, leaving me in a viscious cycle.

I'm going to try disabling pf and after that current. If you have
any other suggestions please send them.

Thanks,

edgar

OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 1996152832 (1903MB)
avail mem = 1926434816 (1837MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x77fb7020 (7 entries)
bios0: vendor coreboot version "4.0.7" date 02/28/2017
bios0: PC Engines APU2
acpi0 at bios0: rev 2
acpi0: sleep states S0 S1 S2 S3 S4 S5
acpi0: tables DSDT FACP SSDT APIC HEST SSDT SSDT HPET
acpi0: wakeup devices PWRB(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PBR8(S4) UOH1(S3) UOH3(S3) UOH5(S3) XHC0(S4)
acpitimer0 at acpi0: 3579545 Hz, 32 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: AMD GX-412TC SOC, 998.27 MHz, 16-30-01
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 99MHz
cpu0: mwait min=64, max=64, IBE
cpu1 at mainbus0: apid 1 (application processor)
cpu1: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu1: smt 0, core 1, package 0
cpu2 at mainbus0: apid 2 (application processor)
cpu2: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu2: smt 0, core 2, package 0
cpu3 at mainbus0: apid 3 (application processor)
cpu3: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
cpu3: smt 0, core 3, package 0
ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
ioapic1 at mainbus0: apid 5 pa 0xfec20000, version 21, 32 pins, remapped
acpihpet0 at acpi0: 14318180 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus -1 (PBR4)
acpiprt2 at acpi0: bus 1 (PBR5)
acpiprt3 at acpi0: bus 2 (PBR6)
acpiprt4 at acpi0: bus 3 (PBR7)
acpiprt5 at acpi0: bus 4 (PBR8)
acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
acpibtn0 at acpi0: PWRB
acpicmos0 at acpi0
cpu0: 998 MHz: speeds: 1000 800 600 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "AMD AMD64 16h Root Complex" rev 0x00
pchb1 at pci0 dev 2 function 0 "AMD AMD64 16h Host" rev 0x00
ppb0 at pci0 dev 2 function 2 "AMD AMD64 16h PCIE" rev 0x00: msi
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:0d:b9:4e:e6:50
ppb1 at pci0 dev 2 function 3 "AMD AMD64 16h PCIE" rev 0x00: msi
pci2 at ppb1 bus 2
em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:0d:b9:4e:e6:51
ppb2 at pci0 dev 2 function 4 "AMD AMD64 16h PCIE" rev 0x00: msi
pci3 at ppb2 bus 3
em2 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:0d:b9:4e:e6:52
ppb3 at pci0 dev 2 function 5 "AMD AMD64 16h PCIE" rev 0x00: msi
pci4 at ppb3 bus 4
iwm0 at pci4 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev 0x73, msi
ccp0 at pci0 dev 8 function 0 "AMD Cryptographic Co-processor v3" rev 0x00
xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x11: msi, xHCI 1.0
usb0 at xhci0: USB revision 3.0
uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 addr 1
ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: apic 4 int 19, AHCI 1.3
ahci0: port 0: 6.0Gb/s
scsibus1 at ahci0: 32 targets
sd0 at scsibus1 targ 0 lun 0: <ATA, InnoDisk Corp. -, S164> SCSI3 0/direct fixed naa.52469309ca222959
sd0: 30533MB, 512 bytes/sector, 62533296 sectors, thin
ehci0 at pci0 dev 19 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 18
usb1 at ehci0: USB revision 2.0
uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x42: SMBus disabled
pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
sdhc0 at pci0 dev 20 function 7 "AMD Bolton SD/MMC" rev 0x01: apic 4 int 16
sdhc0: SDHC 2.0, 50 MHz base clock
sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
pchb2 at pci0 dev 24 function 0 "AMD AMD64 16h Link Cfg" rev 0x00
pchb3 at pci0 dev 24 function 1 "AMD AMD64 16h Address Map" rev 0x00
pchb4 at pci0 dev 24 function 2 "AMD AMD64 16h DRAM Cfg" rev 0x00
km0 at pci0 dev 24 function 3 "AMD AMD64 16h Misc Cfg" rev 0x00
pchb5 at pci0 dev 24 function 4 "AMD AMD64 16h CPU Power" rev 0x00
pchb6 at pci0 dev 24 function 5 "AMD AMD64 16h Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x53
vmm0 at mainbus0: SVM/RVI
uhub2 at uhub1 port 1 configuration 1 interface 0 "Advanced Micro Devices product 0x7900" rev 2.00/0.18 addr 2
ugen0 at uhub2 port 4 "Intel product 0x07dc" rev 2.00/0.01 addr 3
vscsi0 at root
scsibus2 at vscsi0: 256 targets
softraid0 at root
scsibus3 at softraid0: 256 targets
root on sd0a (6bdb4228bb6f3cec.a) swap on sd0b dump on sd0b
iwm0: hw rev 0x140, fw ver 16.242414.0, address 80:86:f2:d8:a1:26

Reply | Threaded
Open this post in threaded view
|

Re: apu2 em0/dhclient problems

trondd-2
On Sun, January 27, 2019 12:44 pm, Edgar Pettijohn wrote:

> I'm trying to replace my dieing soekris box with an apu2 dmesg below.
> However, I can't seem to get em0 to connect to my isp. It will work
> when connecting to the soekris box though. So I don't think its the
> interface that is the problem. But everything I try seems to rule out
> eachother as the problem, leaving me in a viscious cycle.
>
> I'm going to try disabling pf and after that current. If you have
> any other suggestions please send them.
>
> Thanks,
>
> edgar

Does your ISP whitelist by MAC address?


>
> OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 1996152832 (1903MB)
> avail mem = 1926434816 (1837MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x77fb7020 (7 entries)
> bios0: vendor coreboot version "4.0.7" date 02/28/2017
> bios0: PC Engines APU2
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S1 S2 S3 S4 S5
> acpi0: tables DSDT FACP SSDT APIC HEST SSDT SSDT HPET
> acpi0: wakeup devices PWRB(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4)
> PBR8(S4) UOH1(S3) UOH3(S3) UOH5(S3) XHC0(S4)
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: AMD GX-412TC SOC, 998.27 MHz, 16-30-01
> cpu0:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
> 64b/line 16-way L2 cache
> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully
> associative
> cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully
> associative
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
> cpu1:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
> 64b/line 16-way L2 cache
> cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully
> associative
> cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully
> associative
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
> cpu2:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
> 64b/line 16-way L2 cache
> cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully
> associative
> cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully
> associative
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
> cpu3:
> FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB
> 64b/line 16-way L2 cache
> cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully
> associative
> cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully
> associative
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
> ioapic1 at mainbus0: apid 5 pa 0xfec20000, version 21, 32 pins, remapped
> acpihpet0 at acpi0: 14318180 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PBR4)
> acpiprt2 at acpi0: bus 1 (PBR5)
> acpiprt3 at acpi0: bus 2 (PBR6)
> acpiprt4 at acpi0: bus 3 (PBR7)
> acpiprt5 at acpi0: bus 4 (PBR8)
> acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpibtn0 at acpi0: PWRB
> acpicmos0 at acpi0
> cpu0: 998 MHz: speeds: 1000 800 600 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "AMD AMD64 16h Root Complex" rev 0x00
> pchb1 at pci0 dev 2 function 0 "AMD AMD64 16h Host" rev 0x00
> ppb0 at pci0 dev 2 function 2 "AMD AMD64 16h PCIE" rev 0x00: msi
> pci1 at ppb0 bus 1
> em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address
> 00:0d:b9:4e:e6:50
> ppb1 at pci0 dev 2 function 3 "AMD AMD64 16h PCIE" rev 0x00: msi
> pci2 at ppb1 bus 2
> em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address
> 00:0d:b9:4e:e6:51
> ppb2 at pci0 dev 2 function 4 "AMD AMD64 16h PCIE" rev 0x00: msi
> pci3 at ppb2 bus 3
> em2 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address
> 00:0d:b9:4e:e6:52
> ppb3 at pci0 dev 2 function 5 "AMD AMD64 16h PCIE" rev 0x00: msi
> pci4 at ppb3 bus 4
> iwm0 at pci4 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev 0x73,
> msi
> ccp0 at pci0 dev 8 function 0 "AMD Cryptographic Co-processor v3" rev 0x00
> xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x11: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev
> 3.00/1.00 addr 1
> ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: apic 4 int
> 19, AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, InnoDisk Corp. -, S164> SCSI3 0/direct
> fixed naa.52469309ca222959
> sd0: 30533MB, 512 bytes/sector, 62533296 sectors, thin
> ehci0 at pci0 dev 19 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 4 int
> 18
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev
> 2.00/1.00 addr 1
> piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x42: SMBus
> disabled
> pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
> sdhc0 at pci0 dev 20 function 7 "AMD Bolton SD/MMC" rev 0x01: apic 4 int
> 16
> sdhc0: SDHC 2.0, 50 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> pchb2 at pci0 dev 24 function 0 "AMD AMD64 16h Link Cfg" rev 0x00
> pchb3 at pci0 dev 24 function 1 "AMD AMD64 16h Address Map" rev 0x00
> pchb4 at pci0 dev 24 function 2 "AMD AMD64 16h DRAM Cfg" rev 0x00
> km0 at pci0 dev 24 function 3 "AMD AMD64 16h Misc Cfg" rev 0x00
> pchb5 at pci0 dev 24 function 4 "AMD AMD64 16h CPU Power" rev 0x00
> pchb6 at pci0 dev 24 function 5 "AMD AMD64 16h Misc Cfg" rev 0x00
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x53
> vmm0 at mainbus0: SVM/RVI
> uhub2 at uhub1 port 1 configuration 1 interface 0 "Advanced Micro Devices
> product 0x7900" rev 2.00/0.18 addr 2
> ugen0 at uhub2 port 4 "Intel product 0x07dc" rev 2.00/0.01 addr 3
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (6bdb4228bb6f3cec.a) swap on sd0b dump on sd0b
> iwm0: hw rev 0x140, fw ver 16.242414.0, address 80:86:f2:d8:a1:26
>


Reply | Threaded
Open this post in threaded view
|

Re: apu2 em0/dhclient problems

Mikkel C. Simonsen
Den 27-01-2019 kl. 19:45 skrev trondd:

> On Sun, January 27, 2019 12:44 pm, Edgar Pettijohn wrote:
>> I'm trying to replace my dieing soekris box with an apu2 dmesg below.
>> However, I can't seem to get em0 to connect to my isp. It will work
>> when connecting to the soekris box though. So I don't think its the
>> interface that is the problem. But everything I try seems to rule out
>> eachother as the problem, leaving me in a viscious cycle.
>>
>> I'm going to try disabling pf and after that current. If you have
>> any other suggestions please send them.
>>
>> Thanks,
>>
>> edgar
>
> Does your ISP whitelist by MAC address?

My ISP locks the connection to a certain MAC for a number of hours. Tech
support can probably delete the old lease.

Best regards,

Mikkel

Reply | Threaded
Open this post in threaded view
|

Re: apu2 em0/dhclient problems

Edgar Pettijohn III-2
On Sun, Jan 27, 2019 at 09:34:54PM +0100, Mikkel C. Simonsen wrote:

> Den 27-01-2019 kl. 19:45 skrev trondd:
> > On Sun, January 27, 2019 12:44 pm, Edgar Pettijohn wrote:
> > > I'm trying to replace my dieing soekris box with an apu2 dmesg below.
> > > However, I can't seem to get em0 to connect to my isp. It will work
> > > when connecting to the soekris box though. So I don't think its the
> > > interface that is the problem. But everything I try seems to rule out
> > > eachother as the problem, leaving me in a viscious cycle.
> > >
> > > I'm going to try disabling pf and after that current. If you have
> > > any other suggestions please send them.
> > >
> > > Thanks,
> > >
> > > edgar
> >
> > Does your ISP whitelist by MAC address?
>
> My ISP locks the connection to a certain MAC for a number of hours. Tech
> support can probably delete the old lease.
>
> Best regards,
>
> Mikkel
>

I don't think this is the case. I was able to connect directly to my laptop and
get a lease immediately.  Its odd... With base dhclient it goes something like:

em0.... no link
em0......... got link

and then nothing.

I installed isc-dhcp-client and it actually goes through the steps of the whole
DHCPDISCOVER...etc,etc. Unfortunantly it still ends with me not having a connection.
I doubt it will do anything, but I'm going to try updating the bios. Sort of like
checking the oil when the problem is a flat tire, but who knows.

Thanks,

edgar

Reply | Threaded
Open this post in threaded view
|

Re: apu2 em0/dhclient problems

Steve Williams-16
On 27/01/2019 1:44 p.m., Edgar Pettijohn wrote:

> On Sun, Jan 27, 2019 at 09:34:54PM +0100, Mikkel C. Simonsen wrote:
>> Den 27-01-2019 kl. 19:45 skrev trondd:
>>> On Sun, January 27, 2019 12:44 pm, Edgar Pettijohn wrote:
>>>> I'm trying to replace my dieing soekris box with an apu2 dmesg below.
>>>> However, I can't seem to get em0 to connect to my isp. It will work
>>>> when connecting to the soekris box though. So I don't think its the
>>>> interface that is the problem. But everything I try seems to rule out
>>>> eachother as the problem, leaving me in a viscious cycle.
>>>>
>>>> I'm going to try disabling pf and after that current. If you have
>>>> any other suggestions please send them.
>>>>
>>>> Thanks,
>>>>
>>>> edgar
>>> Does your ISP whitelist by MAC address?
>> My ISP locks the connection to a certain MAC for a number of hours. Tech
>> support can probably delete the old lease.
>>
>> Best regards,
>>
>> Mikkel
>>
> I don't think this is the case. I was able to connect directly to my laptop and
> get a lease immediately.  Its odd... With base dhclient it goes something like:
>
> em0.... no link
> em0......... got link
>
> and then nothing.
>
> I installed isc-dhcp-client and it actually goes through the steps of the whole
> DHCPDISCOVER...etc,etc. Unfortunantly it still ends with me not having a connection.
> I doubt it will do anything, but I'm going to try updating the bios. Sort of like
> checking the oil when the problem is a flat tire, but who knows.
>
> Thanks,
>
> edgar
Hi,

I just upgraded my APU2 yesterday and have no problems with my dhcp.  I
have a cable internet connection through my ISP.

Do you have a /etc/dhclient.conf file?  I do not.

Perhaps try killing dhclient, then run it in debugging mode in the
foreground.

/sbin/dhclient -i em0 -d -v

See what happens.

My /etc/hostname.em0 just has "dhcp" in it.

Here's some information from my system:

OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018
[hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 4261072896 (4063MB)
avail mem = 4122664960 (3931MB)

bios0 at mainbus0: SMBIOS rev. 2.7 @ 0xdffb7020 (7 entries)
bios0: vendor coreboot version "88a4f96" date 03/07/2016
bios0: PC Engines apu2

em0 at pci1 dev 0 function 0 "Intel I210" rev 0x03: msi, address
00:0d:b9:44:62:7c

pcengine# ifconfig em0
em0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
         lladdr 00:0d:b9:44:62:7c
         index 1 priority 0 llprio 3
         groups: egress
         media: Ethernet autoselect (1000baseT full-duplex,master)
         status: active
         inet a.b.c.d netmask 0xffffffc0 broadcast a.b.c.something

You might also try running tcpdump while the dhcp is going on and watch
the packet trace.  At a minimum, you could post the packet trace here
for imput.

tcpdump -i em0

Cheers,
Steve W.



Reply | Threaded
Open this post in threaded view
|

Re: apu2 em0/dhclient problems

Marcus MERIGHI
In reply to this post by Edgar Pettijohn III-2
Hello,

[hidden email] (Edgar Pettijohn), 2019.01.27 (Sun) 18:44 (CET):
> I'm trying to replace my dieing soekris box with an apu2 dmesg below.
> However, I can't seem to get em0 to connect to my isp. It will work
> when connecting to the soekris box though. So I don't think its the
> interface that is the problem. But everything I try seems to rule out
> eachother as the problem, leaving me in a viscious cycle.

have you tried any of the other ethernet ports with your uplink?

Give it a go, I've had a similiar failure with em0 on apu2, running
with em1 for the uplink since then without problems.

Marcus

> I'm going to try disabling pf and after that current. If you have
> any other suggestions please send them.
>
> Thanks,
>
> edgar
>
> OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018
>     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> real mem = 1996152832 (1903MB)
> avail mem = 1926434816 (1837MB)
> mpath0 at root
> scsibus0 at mpath0: 256 targets
> mainbus0 at root
> bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x77fb7020 (7 entries)
> bios0: vendor coreboot version "4.0.7" date 02/28/2017
> bios0: PC Engines APU2
> acpi0 at bios0: rev 2
> acpi0: sleep states S0 S1 S2 S3 S4 S5
> acpi0: tables DSDT FACP SSDT APIC HEST SSDT SSDT HPET
> acpi0: wakeup devices PWRB(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PBR8(S4) UOH1(S3) UOH3(S3) UOH5(S3) XHC0(S4)
> acpitimer0 at acpi0: 3579545 Hz, 32 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: AMD GX-412TC SOC, 998.27 MHz, 16-30-01
> cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
> cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> cpu0: smt 0, core 0, package 0
> mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> cpu0: apic clock running at 99MHz
> cpu0: mwait min=64, max=64, IBE
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
> cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
> cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> cpu1: smt 0, core 1, package 0
> cpu2 at mainbus0: apid 2 (application processor)
> cpu2: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
> cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
> cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> cpu2: smt 0, core 2, package 0
> cpu3 at mainbus0: apid 3 (application processor)
> cpu3: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
> cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
> cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> cpu3: smt 0, core 3, package 0
> ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
> ioapic1 at mainbus0: apid 5 pa 0xfec20000, version 21, 32 pins, remapped
> acpihpet0 at acpi0: 14318180 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus -1 (PBR4)
> acpiprt2 at acpi0: bus 1 (PBR5)
> acpiprt3 at acpi0: bus 2 (PBR6)
> acpiprt4 at acpi0: bus 3 (PBR7)
> acpiprt5 at acpi0: bus 4 (PBR8)
> acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> acpibtn0 at acpi0: PWRB
> acpicmos0 at acpi0
> cpu0: 998 MHz: speeds: 1000 800 600 MHz
> pci0 at mainbus0 bus 0
> pchb0 at pci0 dev 0 function 0 "AMD AMD64 16h Root Complex" rev 0x00
> pchb1 at pci0 dev 2 function 0 "AMD AMD64 16h Host" rev 0x00
> ppb0 at pci0 dev 2 function 2 "AMD AMD64 16h PCIE" rev 0x00: msi
> pci1 at ppb0 bus 1
> em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:0d:b9:4e:e6:50
> ppb1 at pci0 dev 2 function 3 "AMD AMD64 16h PCIE" rev 0x00: msi
> pci2 at ppb1 bus 2
> em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:0d:b9:4e:e6:51
> ppb2 at pci0 dev 2 function 4 "AMD AMD64 16h PCIE" rev 0x00: msi
> pci3 at ppb2 bus 3
> em2 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:0d:b9:4e:e6:52
> ppb3 at pci0 dev 2 function 5 "AMD AMD64 16h PCIE" rev 0x00: msi
> pci4 at ppb3 bus 4
> iwm0 at pci4 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev 0x73, msi
> ccp0 at pci0 dev 8 function 0 "AMD Cryptographic Co-processor v3" rev 0x00
> xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x11: msi, xHCI 1.0
> usb0 at xhci0: USB revision 3.0
> uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 addr 1
> ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: apic 4 int 19, AHCI 1.3
> ahci0: port 0: 6.0Gb/s
> scsibus1 at ahci0: 32 targets
> sd0 at scsibus1 targ 0 lun 0: <ATA, InnoDisk Corp. -, S164> SCSI3 0/direct fixed naa.52469309ca222959
> sd0: 30533MB, 512 bytes/sector, 62533296 sectors, thin
> ehci0 at pci0 dev 19 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 18
> usb1 at ehci0: USB revision 2.0
> uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
> piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x42: SMBus disabled
> pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
> sdhc0 at pci0 dev 20 function 7 "AMD Bolton SD/MMC" rev 0x01: apic 4 int 16
> sdhc0: SDHC 2.0, 50 MHz base clock
> sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> pchb2 at pci0 dev 24 function 0 "AMD AMD64 16h Link Cfg" rev 0x00
> pchb3 at pci0 dev 24 function 1 "AMD AMD64 16h Address Map" rev 0x00
> pchb4 at pci0 dev 24 function 2 "AMD AMD64 16h DRAM Cfg" rev 0x00
> km0 at pci0 dev 24 function 3 "AMD AMD64 16h Misc Cfg" rev 0x00
> pchb5 at pci0 dev 24 function 4 "AMD AMD64 16h CPU Power" rev 0x00
> pchb6 at pci0 dev 24 function 5 "AMD AMD64 16h Misc Cfg" rev 0x00
> isa0 at pcib0
> isadma0 at isa0
> com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> com0: console
> com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> pcppi0 at isa0 port 0x61
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x53
> vmm0 at mainbus0: SVM/RVI
> uhub2 at uhub1 port 1 configuration 1 interface 0 "Advanced Micro Devices product 0x7900" rev 2.00/0.18 addr 2
> ugen0 at uhub2 port 4 "Intel product 0x07dc" rev 2.00/0.01 addr 3
> vscsi0 at root
> scsibus2 at vscsi0: 256 targets
> softraid0 at root
> scsibus3 at softraid0: 256 targets
> root on sd0a (6bdb4228bb6f3cec.a) swap on sd0b dump on sd0b
> iwm0: hw rev 0x140, fw ver 16.242414.0, address 80:86:f2:d8:a1:26
>

Reply | Threaded
Open this post in threaded view
|

Re: apu2 em0/dhclient problems

Edgar Pettijohn III-2
In reply to this post by Edgar Pettijohn III-2

On Jan 29, 2019 11:01 AM, Marcus MERIGHI <[hidden email]> wrote:

>
> Hello,
>
> [hidden email] (Edgar Pettijohn), 2019.01.27 (Sun) 18:44 (CET):
> > I'm trying to replace my dieing soekris box with an apu2 dmesg below.
> > However, I can't seem to get em0 to connect to my isp. It will work
> > when connecting to the soekris box though. So I don't think its the
> > interface that is the problem. But everything I try seems to rule out
> > eachother as the problem, leaving me in a viscious cycle.
>
> have you tried any of the other ethernet ports with your uplink?
>

I haven't. I did consider it, but then em0 worked when connecting to my router so I didn't. I guess it can't hurt to try anyway.

Thanks,

Edgar

> Give it a go, I've had a similiar failure with em0 on apu2, running
> with em1 for the uplink since then without problems.
>
> Marcus
>
> > I'm going to try disabling pf and after that current. If you have
> > any other suggestions please send them.
> >
> > Thanks,
> >
> > edgar
> >
> > OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018
> >     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > real mem = 1996152832 (1903MB)
> > avail mem = 1926434816 (1837MB)
> > mpath0 at root
> > scsibus0 at mpath0: 256 targets
> > mainbus0 at root
> > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x77fb7020 (7 entries)
> > bios0: vendor coreboot version "4.0.7" date 02/28/2017
> > bios0: PC Engines APU2
> > acpi0 at bios0: rev 2
> > acpi0: sleep states S0 S1 S2 S3 S4 S5
> > acpi0: tables DSDT FACP SSDT APIC HEST SSDT SSDT HPET
> > acpi0: wakeup devices PWRB(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PBR8(S4) UOH1(S3) UOH3(S3) UOH5(S3) XHC0(S4)
> > acpitimer0 at acpi0: 3579545 Hz, 32 bits
> > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > cpu0 at mainbus0: apid 0 (boot processor)
> > cpu0: AMD GX-412TC SOC, 998.27 MHz, 16-30-01
> > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> > cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
> > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> > cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> > cpu0: smt 0, core 0, package 0
> > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> > cpu0: apic clock running at 99MHz
> > cpu0: mwait min=64, max=64, IBE
> > cpu1 at mainbus0: apid 1 (application processor)
> > cpu1: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
> > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> > cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
> > cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> > cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> > cpu1: smt 0, core 1, package 0
> > cpu2 at mainbus0: apid 2 (application processor)
> > cpu2: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
> > cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> > cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
> > cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> > cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> > cpu2: smt 0, core 2, package 0
> > cpu3 at mainbus0: apid 3 (application processor)
> > cpu3: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
> > cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> > cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
> > cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> > cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> > cpu3: smt 0, core 3, package 0
> > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
> > ioapic1 at mainbus0: apid 5 pa 0xfec20000, version 21, 32 pins, remapped
> > acpihpet0 at acpi0: 14318180 Hz
> > acpiprt0 at acpi0: bus 0 (PCI0)
> > acpiprt1 at acpi0: bus -1 (PBR4)
> > acpiprt2 at acpi0: bus 1 (PBR5)
> > acpiprt3 at acpi0: bus 2 (PBR6)
> > acpiprt4 at acpi0: bus 3 (PBR7)
> > acpiprt5 at acpi0: bus 4 (PBR8)
> > acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> > acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> > acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> > acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> > acpibtn0 at acpi0: PWRB
> > acpicmos0 at acpi0
> > cpu0: 998 MHz: speeds: 1000 800 600 MHz
> > pci0 at mainbus0 bus 0
> > pchb0 at pci0 dev 0 function 0 "AMD AMD64 16h Root Complex" rev 0x00
> > pchb1 at pci0 dev 2 function 0 "AMD AMD64 16h Host" rev 0x00
> > ppb0 at pci0 dev 2 function 2 "AMD AMD64 16h PCIE" rev 0x00: msi
> > pci1 at ppb0 bus 1
> > em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:0d:b9:4e:e6:50
> > ppb1 at pci0 dev 2 function 3 "AMD AMD64 16h PCIE" rev 0x00: msi
> > pci2 at ppb1 bus 2
> > em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:0d:b9:4e:e6:51
> > ppb2 at pci0 dev 2 function 4 "AMD AMD64 16h PCIE" rev 0x00: msi
> > pci3 at ppb2 bus 3
> > em2 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:0d:b9:4e:e6:52
> > ppb3 at pci0 dev 2 function 5 "AMD AMD64 16h PCIE" rev 0x00: msi
> > pci4 at ppb3 bus 4
> > iwm0 at pci4 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev 0x73, msi
> > ccp0 at pci0 dev 8 function 0 "AMD Cryptographic Co-processor v3" rev 0x00
> > xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x11: msi, xHCI 1.0
> > usb0 at xhci0: USB revision 3.0
> > uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 addr 1
> > ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: apic 4 int 19, AHCI 1.3
> > ahci0: port 0: 6.0Gb/s
> > scsibus1 at ahci0: 32 targets
> > sd0 at scsibus1 targ 0 lun 0: <ATA, InnoDisk Corp. -, S164> SCSI3 0/direct fixed naa.52469309ca222959
> > sd0: 30533MB, 512 bytes/sector, 62533296 sectors, thin
> > ehci0 at pci0 dev 19 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 18
> > usb1 at ehci0: USB revision 2.0
> > uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
> > piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x42: SMBus disabled
> > pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
> > sdhc0 at pci0 dev 20 function 7 "AMD Bolton SD/MMC" rev 0x01: apic 4 int 16
> > sdhc0: SDHC 2.0, 50 MHz base clock
> > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> > pchb2 at pci0 dev 24 function 0 "AMD AMD64 16h Link Cfg" rev 0x00
> > pchb3 at pci0 dev 24 function 1 "AMD AMD64 16h Address Map" rev 0x00
> > pchb4 at pci0 dev 24 function 2 "AMD AMD64 16h DRAM Cfg" rev 0x00
> > km0 at pci0 dev 24 function 3 "AMD AMD64 16h Misc Cfg" rev 0x00
> > pchb5 at pci0 dev 24 function 4 "AMD AMD64 16h CPU Power" rev 0x00
> > pchb6 at pci0 dev 24 function 5 "AMD AMD64 16h Misc Cfg" rev 0x00
> > isa0 at pcib0
> > isadma0 at isa0
> > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > com0: console
> > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > pcppi0 at isa0 port 0x61
> > spkr0 at pcppi0
> > lpt0 at isa0 port 0x378/4 irq 7
> > wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x53
> > vmm0 at mainbus0: SVM/RVI
> > uhub2 at uhub1 port 1 configuration 1 interface 0 "Advanced Micro Devices product 0x7900" rev 2.00/0.18 addr 2
> > ugen0 at uhub2 port 4 "Intel product 0x07dc" rev 2.00/0.01 addr 3
> > vscsi0 at root
> > scsibus2 at vscsi0: 256 targets
> > softraid0 at root
> > scsibus3 at softraid0: 256 targets
> > root on sd0a (6bdb4228bb6f3cec.a) swap on sd0b dump on sd0b
> > iwm0: hw rev 0x140, fw ver 16.242414.0, address 80:86:f2:d8:a1:26
> >
>