amd64/5003: amd64 bsd.mp hang on dual core amd64 (HP DL145)

Previous Topic Next Topic
 
classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

amd64/5003: amd64 bsd.mp hang on dual core amd64 (HP DL145)

beck-7
>Number:         5003
>Category:       amd64
>Synopsis:       bsd.mp hangs ons HP DL145 dual core opeteron
>Confidential:   yes
>Severity:       serious
>Priority:       medium
>Responsible:    bugs
>State:          open
>Quarter:        
>Keywords:      
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Wed Feb 01 23:00:02 GMT 2006
>Closed-Date:
>Last-Modified:
>Originator:     Bob Beck
>Release:        Current (3.9)
>Organization:
net
>Environment:
        System      : OpenBSD 3.9-beta
        Architecture: OpenBSD.amd64
        Machine     : amd64, 2x dual core opteron, hp dl145
>Description:

        booting /bsd.mp hard hangs shortly after mounting filesystems,
and looks like always in the same place - doesn't appear possible to
break into ddb. /bsd boots fine on this machine (dmesg sent to
[hidden email]).

dmesg to the hang point follows:
booting hd0a:bsd.mp.snap: 3730180+693964+598712+0+428752 [80+313992+194403]=0x9b100c
entry point at 0x1001e0 [7205c766, 34000004, 24448b12, 5e60a304]*[ using 509248 bytes of bsd ELF symbol table ]
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2006 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 3.9-beta (GENERIC.MP) #710: Mon Jan 30 13:49:52 MST 2006
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
real mem = 3219881984 (3144416K)
avail mem = 2758156288 (2693512K)
using 22937 buffers containing 322195456 bytes (314644K) of memory
mainbus0 (root)
ipmi0 at mainbus0: version 1.5 interface KCS iobase 0xca2/2 spacing 1
mainbus0: Intel MP Specification (Version 1.4) (AMD      HAMMER      )
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Dual Core AMD Opteron(tm) Processor 275, 2210.46 MHz
cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu0: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu0: apic clock running at 200MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Dual Core AMD Opteron(tm) Processor 275, 2210.19 MHz
cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu1: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu1: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2 at mainbus0: apid 2 (application processor)
cpu2: Dual Core AMD Opteron(tm) Processor 275, 2210.19 MHz
cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu2: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu2: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Dual Core AMD Opteron(tm) Processor 275, 2210.19 MHz
cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,NXE,MMXX,FFXSR,LONG,3DNOW2,3DNOW
cpu3: 64KB 64b/line 2-way I-cache, 64KB 64b/line 2-way D-cache, 1MB 64b/line 16-way L2 cache
cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
cpu3: DTLB 32 4KB entries fully associative, 8 4MB entries fully associative
mpbios: bus 0 is type PCI  
mpbios: bus 1 is type PCI  
mpbios: bus 2 is type PCI  
mpbios: bus 3 is type PCI  
mpbios: bus 4 is type PCI  
mpbios: bus 128 is type PCI  
mpbios: bus 129 is type PCI  
mpbios: bus 134 is type PCI  
mpbios: bus 139 is type ISA  
ioapic0 at mainbus0 apid 4: pa 0xffff8000052d3e24, version 11, 24 pins
ioapic1 at mainbus0 apid 5: pa 0xffff8000052d3d24, version 11, 7 pins
ioapic2 at mainbus0 apid 6: pa 0xffff8000052d3b24, version 11, 7 pins
pci0 at mainbus0 bus 0: configuration mode 1
"Nvidia nForce4 DDR" rev 0xa3 at pci0 dev 0 function 0 not configured
pcib0 at pci0 dev 1 function 0 "Nvidia nForce4 ISA" rev 0xa3
nviic0 at pci0 dev 1 function 1 "Nvidia nForce4 SMBus" rev 0xa2
iic at nviic0 not configured
iic at nviic0 not configured
ohci0 at pci0 dev 2 function 0 "Nvidia nForce4 USB" rev 0xa2: apic 4 int 10 (irq 10), version 1.0, legacy support
usb0 at ohci0: USB revision 1.0
uhub0 at usb0
uhub0: Nvidia OHCI root hub, rev 1.00/1.00, addr 1
uhub0: 4 ports with 4 removable, self powered
ehci0 at pci0 dev 2 function 1 "Nvidia nForce4 USB" rev 0xa3: apic 4 int 11 (irq 11)
ehci0: timed out waiting for BIOS
usb1 at ehci0: USB revision 2.0
uhub1 at usb1
uhub1: Nvidia EHCI root hub, rev 2.00/1.00, addr 1
uhub1: 4 ports with 4 removable, self powered
pciide0 at pci0 dev 6 function 0 "Nvidia nForce4 IDE" rev 0xa2: DMA, channel 0 configured to compatibility, channel 1 configured to compatibility
atapiscsi0 at pciide0 channel 0 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <TEAC, CD-224E, 9.9A> SCSI0 5/cdrom removable
cd0(pciide0:0:0): using PIO mode 4, DMA mode 2
pciide0: channel 1 disabled (no drives)
pciide1 at pci0 dev 8 function 0 "Nvidia nForce4 SATA 2" rev 0xa3: DMA
pciide1: using apic 4 int 10 (irq 10) for native-PCI interrupt
wd0 at pciide1 channel 0 drive 0: <Maxtor 6Y080M0>
wd0: 16-sector PIO, LBA48, 76319MB, 156301488 sectors
wd0(pciide1:0:0): using PIO mode 4, Ultra-DMA mode 5
ppb0 at pci0 dev 9 function 0 "Nvidia nForce4 PCI-PCI" rev 0xa2
pci1 at ppb0 bus 1
vga1 at pci1 dev 5 function 0 "Nvidia GeForce2 MX" rev 0xb2
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
ppb1 at pci0 dev 12 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 4 int 11 (irq 11), address 00:14:c2:54:44:f5
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 13 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci3 at ppb2 bus 3
bge1 at pci3 dev 0 function 0 "Broadcom BCM5721" rev 0x11, BCM5750 B1 (0x4101): apic 4 int 10 (irq 10), address 00:14:c2:54:44:f4
brgphy1 at bge1 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb3 at pci0 dev 14 function 0 "Nvidia nForce4 PCIE" rev 0xa3
pci4 at ppb3 bus 4
pchb0 at pci0 dev 24 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb1 at pci0 dev 24 function 1 "AMD AMD64 Address Map" rev 0x00
pchb2 at pci0 dev 24 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb3 at pci0 dev 24 function 3 "AMD AMD64 Misc Cfg" rev 0x00
pchb4 at pci0 dev 25 function 0 "AMD AMD64 HyperTransport" rev 0x00
pchb5 at pci0 dev 25 function 1 "AMD AMD64 Address Map" rev 0x00
pchb6 at pci0 dev 25 function 2 "AMD AMD64 DRAM Cfg" rev 0x00
pchb7 at pci0 dev 25 function 3 "AMD AMD64 Misc Cfg" rev 0x00
isa0 at pcib0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
sysbeep0 at pcppi0
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a
rootdev=0x0 rrootdev=0x300 rawdev=0x302
Automatic boot in progress: starting file system checks.
/dev/rwd0a: file system is clean; not checking
/dev/rwd0d: file system is clean; not checking
/dev/rwd0e: file system is clean; not checking
/dev/rwd0g: file system is clean; not checking
/dev/rwd0f: file system is clean; not checking
setting tty flags
ddb.console: 0 -> 1
starting network
starting system logger
starting initial daemons: ntpd.
[halt sent]
[halt sent]

box is remotely serial accessible if need be for the next little while.

       
>How-To-Repeat:
        Boot current snapshot /bsd.mp on the box
>Fix:


>Release-Note:
>Audit-Trail:
>Unformatted: