alpha/4615: Alpha crashes with keyboard and serial console

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

alpha/4615: Alpha crashes with keyboard and serial console

Janjaap van Velthooven
>Number:         4615
>Category:       alpha
>Synopsis:       Alpha crashes with keyboard and serial console
>Confidential:   yes
>Severity:       serious
>Priority:       medium
>Responsible:    bugs
>State:          open
>Quarter:        
>Keywords:      
>Date-Required:
>Class:          sw-bug
>Submitter-Id:   net
>Arrival-Date:   Fri Nov 11 21:20:01 GMT 2005
>Closed-Date:
>Last-Modified:
>Originator:     Janjaap van Velthooven
>Release:        Current
>Organization:
net
>Environment:
       
        System      : OpenBSD 3.8
        Architecture: OpenBSD.alpha
        Machine     : alpha
>Description:
When I boot my AlphaPC 164SX with console set to serial the boot process
hangs when a keyboard is present on the PS2 plug

>How-To-Repeat:
in the bootrom:
attach ps2 keyboard
>Fix:
       

Dmesg: (with ps and trace output)
        (second working boot is with console set to graphics)

OpenBSD 3.8-current (GENERIC) #0: Thu Nov  3 16:52:47 CET 2005
    janjaap@alf:/mnt/forest/trees/src/sys/arch/alpha/compile/GENERIC
Digital AlphaPC 164SX 533 MHz
8192 byte page size, 1 processor.
total memory = 268435456 (262144K)
(1966080 reserved for PROM, 266469376 used by OpenBSD)
avail memory = 226680832 (221368K)
using 3252 buffers containing 26640384 bytes (26016K) of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), PCA56-2 (unknown minor type 2)
cpu0: Architecture extensions: 1<BWX>
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (Pyxis), pass 1
cia0: extended capabilities: 1<BWEN>
cia0: using BWX for PCI config and bus access
pci0 at cia0 bus 0
em0 at pci0 dev 5 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: eb164 irq 9, address 00:0e:0c:51:3d:a0
siop0 at pci0 dev 6 function 0 "Symbios Logic 53c875" rev 0x26: eb164 irq 11, using 4K of on-board RAM
scsibus0 at siop0: 16 targets
ti0 at pci0 dev 7 function 0 "Netgear GA620" rev 0x01: eb164 irq 10, address 00:02:e3:00:25:82
sio0 at pci0 dev 8 function 0 "Contaq Microsystems CY82C693U ISA" rev 0x00
pciide0 at pci0 dev 8 function 1 "Contaq Microsystems CY82C693U ISA" rev 0x00: DMA, channel 0 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST36531A>
wd0: 32-sector PIO, LBA, 6204MB, 12706470 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 6Y160P0>
wd1: 16-sector PIO, LBA48, 156334MB, 320173056 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, DMA mode 2
pciide1 at pci0 dev 8 function 2 "Contaq Microsystems CY82C693U ISA" rev 0x00: no DMA, channel 0 wired to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <LITEON, CD-ROM LTN301, MM11> SCSI0 5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4
ohci0 at pci0 dev 8 function 3 "Contaq Microsystems CY82C693U ISA" rev 0x00: couldn't map interrupt
vga0 at pci0 dev 9 function 0 "Matrox MGA G200 PCI" rev 0x01
wsdisplay0 at vga0 mux 1
wsdisplay0: screen 0-5 added (80x25, vt100 emulation)
isa0 at sio0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com0: console
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0 mux 1
panic: trap
Stopped at Debugger+0x4: ret zero,(ra)
RUN AT LEAST 'trace' AND 'ps' AND INCLUDE OUTPUT WHEN REPORTING THIS PANIC!
DO NOT EVEN BOTHER REPORTING THIS WITHOUT INCLUDING THAT INFORMATION!
ddb> ps
PID   PPID   PGRP    UID  S       FLAGS  WAIT       COMMAND        
*    0     -1      0      0  7     0x80204             swapper        
ddb> trace
Debugger(6, fffffc00007b5d18, 5, 8, 3, 8) at Debugger+0x4
panic(fffffc0000797a64, 1, 0, 2, fffffc00001e0ff0, 1) at panic+0x130
trap(?, ?, 0, 2, fffffc00001e0ff0, 1) at trap+0x51c
XentMM(?, ?, 0, 2, ?, 1) at XentMM+0x20
pckbc_enqueue_cmd(4, 0, fffffc00001e1188, 1, 0, 1) at pckbc_enqueue_cmd+0x84
pckbd_enable(?, ?, ?, 1, ?, 1) at pckbd_enable+0x90
wskbd_enable(?, ?, ?, 1, ?, 1) at wskbd_enable+0x64
wskbd_set_display(?, ?, ?, 1, ?, 1) at wskbd_set_display+0x74
wsmux_attach_sc(?, ?, ?, 1, ?, 1) at wsmux_attach_sc+0xe4
wskbd_attach(?, ?, ?, ?, ?, 1) at wskbd_attach+0x2ac
config_attach(?, ?, ?, ?, ?, 1) at config_attach+0x244
config_found_sm(?, ?, ?, ?, ?, 1) at config_found_sm+0x54
pckbdattach(?, ?, ?, ?, ?, ?) at pckbdattach+0x1a8
config_attach(?, ?, ?, ?, ?, ?) at config_attach+0x244
config_found_sm(?, ?, ?, ?, ?, ?) at config_found_sm+0x54
pckbc_attach_slot(?, ?, ?, ?, ?, ?) at pckbc_attach_slot+0x54
pckbc_attach(?, ?, ?, ?, ?, ?) at pckbc_attach+0xc0
pckbc_isa_attach(?, ?, ?, ?, ?, ?) at pckbc_isa_attach+0x190
config_attach(?, ?, ?, ?, ?, ?) at config_attach+0x244
isascan(?, ?, ?, ?, ?, ?) at isascan+0x1e4
config_scan(?, ?, ?, ?, ?, ?) at config_scan+0x124
isaattach(?, ?, ?, ?, ?, ?) at isaattach+0x19c
config_attach(?, ?, ?, ?, ?, ?) at config_attach+0x244
config_found_sm(?, ?, ?, ?, ?, ?) at config_found_sm+0x54
sio_bridge_callback(?, ?, ?, ?, ?, ?) at sio_bridge_callback+0x110
config_process_deferred_children(?, ?, ?, ?, ?, ?) at config_process_deferred_children+0x90
config_attach(?, ?, ?, ?, ?, ?) at config_attach+0x258
config_found_sm(?, ?, ?, ?, ?, ?) at config_found_sm+0x54
ciaattach(?, ?, ?, ?, ?, ?) at ciaattach+0x34c
config_attach(?, ?, ?, ?, ?, ?) at config_attach+0x244
config_found_sm(?, ?, ?, ?, ?, ?) at config_found_sm+0x54
alpha_XXX_dmamap(?, ?, ?, ?, ?, ?) at alpha_XXX_dmamap+0x1c0
config_attach(?, ?, ?, ?, ?, ?) at config_attach+0x244
config_rootfound(?, ?, ?, ?, ?, ?) at config_rootfound+0x78
cpu_configure(?, ?, ?, ?, ?, ?) at cpu_configure+0x48
main(?, ?, ?, ?, ?, ?) at main+0x474
__start(?, ?, ?, ?, ?, ?) at __start+0x64
__start(?, ?, ?, ?, ?, ?) at __start+0x64
__start(?, ?, ?, ?, ?, ?) at __start+0x64
__start(?, ?, ?, ?, ?, ?) at __start+0x64
__start(?, ?, ?, ?, ?, ?) at __start+0x64
__start(?, ?, ?, ?, ?, ?) at __start+0x64
__start(?, ?, ?, ?, ?, ?) at __start+0x64
__start(?, ?, ?, ?, ?, ?) at __start+0x64
__start(?, ?, ?, ?, ?, ?) at __start+0x64
_ddb> halted.

[ using 491368 bytes of bsd ELF symbol table ]
consinit: not using prom console
Copyright (c) 1982, 1986, 1989, 1991, 1993
        The Regents of the University of California.  All rights reserved.
Copyright (c) 1995-2005 OpenBSD. All rights reserved.  http://www.OpenBSD.org

OpenBSD 3.8-current (GENERIC) #0: Thu Nov  3 16:52:47 CET 2005
    janjaap@alf:/mnt/forest/trees/src/sys/arch/alpha/compile/GENERIC
Digital AlphaPC 164SX 533 MHz
8192 byte page size, 1 processor.
total memory = 268435456 (262144K)
(1966080 reserved for PROM, 266469376 used by OpenBSD)
avail memory = 226680832 (221368K)
using 3252 buffers containing 26640384 bytes (26016K) of memory
mainbus0 (root)
cpu0 at mainbus0: ID 0 (primary), PCA56-2 (unknown minor type 2)
cpu0: Architecture extensions: 1<BWX>
cia0 at mainbus0: DECchip 2117x Core Logic Chipset (Pyxis), pass 1
cia0: extended capabilities: 1<BWEN>
cia0: using BWX for PCI config and bus access
pci0 at cia0 bus 0
em0 at pci0 dev 5 function 0 "Intel PRO/1000MT (82541GI)" rev 0x00: eb164 irq 9, address 00:0e:0c:51:3d:a0
siop0 at pci0 dev 6 function 0 "Symbios Logic 53c875" rev 0x26: eb164 irq 11, using 4K of on-board RAM
scsibus0 at siop0: 16 targets
ti0 at pci0 dev 7 function 0 "Netgear GA620" rev 0x01: eb164 irq 10, address 00:02:e3:00:25:82
sio0 at pci0 dev 8 function 0 "Contaq Microsystems CY82C693U ISA" rev 0x00
pciide0 at pci0 dev 8 function 1 "Contaq Microsystems CY82C693U ISA" rev 0x00: DMA, channel 0 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <ST36531A>
wd0: 32-sector PIO, LBA, 6204MB, 12706470 sectors
wd1 at pciide0 channel 0 drive 1: <Maxtor 6Y160P0>
wd1: 16-sector PIO, LBA48, 156334MB, 320173056 sectors
wd0(pciide0:0:0): using PIO mode 4, DMA mode 2
wd1(pciide0:0:1): using PIO mode 4, DMA mode 2
pciide1 at pci0 dev 8 function 2 "Contaq Microsystems CY82C693U ISA" rev 0x00: no DMA, channel 0 wired to compatibility
atapiscsi0 at pciide1 channel 0 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <LITEON, CD-ROM LTN301, MM11> SCSI0 5/cdrom removable
cd0(pciide1:0:0): using PIO mode 4
ohci0 at pci0 dev 8 function 3 "Contaq Microsystems CY82C693U ISA" rev 0x00: couldn't map interrupt
vga0 at pci0 dev 9 function 0 "Matrox MGA G200 PCI" rev 0x01
wsdisplay0 at vga0 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
isa0 at sio0
isadma0 at isa0
com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pmsi0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pmsi0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
isabeep0 at pcppi0
lpt0 at isa0 port 0x3bc/4 irq 7
fdc0 at isa0 port 0x3f0/6 irq 6 drq 2
mcclock0 at isa0 port 0x70/2: mc146818 or compatible
stray isa irq 3
stray isa irq 4
root on wd0a swap on wd0b
rootdev=0x0 rrootdev=0x2400 rawdev=0x2402
stray isa irq 4
stray isa irq 3
wsdisplay0: screen 8 added (80x25, vt100 emulation)
wsdisplay0: screen 9 added (80x25, vt100 emulation)
wsdisplay0: screen 4 deleted
wsdisplay0: screen 5 deleted
wsdisplay0: screen 4 added (80x40, vt100 emulation)
wsdisplay0: screen 5 added (80x40, vt100 emulation)
wsdisplay0: screen 6 added (80x40, vt100 emulation)
wsdisplay0: screen 7 added (80x40, vt100 emulation)
wsdisplay0: screen 10 added (80x50, vt100 emulation)
wsdisplay0: screen 11 added (80x50, vt100 emulation)


>Release-Note:
>Audit-Trail:
>Unformatted:
 >>> set console serial
 >>> init
 >>> boot

Reply | Threaded
Open this post in threaded view
|

Re: alpha/4615: Alpha crashes with keyboard and serial console

Janjaap van Velthooven
The following reply was made to PR alpha/4615; it has been noted by GNATS.

From: [hidden email] (Janjaap van Velthooven)
To: [hidden email]
Cc:  
Subject: Re: alpha/4615: Alpha crashes with keyboard and serial console
Date: Thu, 17 Nov 2005 22:21:08 +0100 (CET)

         Hi,
 
 It was pointed out to me that my bugreport had a faulty Reply-To: header.
 I can be reached at the From: adress:
 
 [hidden email]
 
  Janjaap van Velthooven
 --  ________________________________________
    / __/ /_    / ______/ /_  __/ __/ /___  /
   / /_  __/___/_/_  /___  / / __/ /___  / /          [hidden email]
  /___/_/_________/_____/_/_/_/_______/_/_/