ahci message

classic Classic list List threaded Threaded
9 messages Options
Reply | Threaded
Open this post in threaded view
|

ahci message

Marcos Laufer - Ipv4networks.com
Hello list,

Does anyone know what this means? "ahci0: stopping the port, softreset
slot 26 was still active."

Does this mean that ahci has been disabled and now disks are working as
regular sata disks?

Regards,
Marcos

Reply | Threaded
Open this post in threaded view
|

Re: ahci message

Dmitrij D. Czarkoff-2
On Tue, Nov 2, 2010 at 9:01 PM, Marcos Laufer <[hidden email]> wrote:
> Hello list,
>
> Does anyone know what this means? "ahci0: stopping the port, softreset slot
> 26 was still active."
>
> Does this mean that ahci has been disabled and now disks are working as
> regular sata disks?

What do You mean? AHCI is the SATA controller interface, which all the
regular SATA discks work with.

The message You've cited says that Your AHCI controller disabled some
port. Unless You provide the full dmesg noone could help You with more
details.

--
Dmitrij D. Czarkoff

Reply | Threaded
Open this post in threaded view
|

Re: ahci message

Marcos Laufer - Ipv4networks.com
Ok here it goes:

OpenBSD 4.3 (GENERIC.MP) #587: Wed Mar 12 11:21:57 MDT 2008
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
RTC BIOS diagnostic error 80<clock_battery>
cpu0: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.39 GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
real mem  = 3739484160 (3566MB)
avail mem = 3631726592 (3463MB)
RTC BIOS diagnostic error 80<clock_battery>
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/07/08, SMBIOS rev. 2.4 @
0xe2330 (39 entries)
bios0: vendor Intel Corp. version "JOQ3510J.86A.0942.2008.0807.1958"
date 08/07/2008
bios0: Intel Corporation DQ35MP
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP APIC WDDT MCFG ASF! DMAR ASPT WDTT SSDT SSDT
SSDT SSDT SSDT TCPA
acpi0: wakeup devices SLPB(S4) P32_(S4) UAR1(S4) ILAN(S4) PEGP(S4)
PEX0(S4) PEX1(S4) PEX2(S4) PEX3(S4) PEX4(S4) PEX5(S4) UHC1(S3) UHC2(S3)
UHC3(S3) UHC4(S3) EHCI(S3) EHC2(S3) UH42(S3) UHC5(S3) UHC6(S3) AZAL(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 265MHz
cpu1 at mainbus0: apid 2 (application processor)
cpu1: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.40 GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.39 GHz
cpu2:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
cpu3 at mainbus0: apid 3 (application processor)
cpu3: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz ("GenuineIntel"
686-class) 2.39 GHz
cpu3:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: duplicate apic id, remapped to apid 4
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 6 (P32_)
acpiprt2 at acpi0: bus 1 (PEX0)
acpiprt3 at acpi0: bus 2 (PEX1)
acpiprt4 at acpi0: bus 3 (PEX2)
acpiprt5 at acpi0: bus 4 (PEX3)
acpiprt6 at acpi0: bus 5 (PEX4)
acpiprt7 at acpi0: bus -1 (PEX5)
acpicpu0 at acpi0: C1
acpicpu1 at acpi0: C1
acpicpu2 at acpi0: C1
acpicpu3 at acpi0: C1
acpibtn0 at acpi0: SLPB
bios0: ROM list: 0xc0000/0xb400! 0xcb800/0x2400!
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82Q35 Host" rev 0x02
vga1 at pci0 dev 2 function 0 "Intel 82Q35 Video" rev 0x02
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
"Intel 82Q35 HECI" rev 0x02 at pci0 dev 3 function 0 not configured
pciide0 at pci0 dev 3 function 2 "Intel 82Q35 PT IDER" rev 0x02: DMA
(unsupported), channel 0 wired to native-PCI, channel 1 wired to native-PCI
pciide0: using apic 4 int 18 (irq 9) for native-PCI interrupt
pciide0: channel 0 ignored (not responding; disabled or no drives?)
pciide0: channel 1 ignored (not responding; disabled or no drives?)
"Intel 82Q35 KT" rev 0x02 at pci0 dev 3 function 3 not configured
em0 at pci0 dev 25 function 0 "Intel ICH9 IGP AMT" rev 0x02: apic 4 int
20 (irq 11), address 00:19:d1:b1:f2:0d
uhci0 at pci0 dev 26 function 0 "Intel 82801I USB" rev 0x02: apic 4 int
18 (irq 9)
uhci1 at pci0 dev 26 function 1 "Intel 82801I USB" rev 0x02: apic 4 int
21 (irq 9)
uhci2 at pci0 dev 26 function 2 "Intel 82801I USB" rev 0x02: apic 4 int
17 (irq 10)
ehci0 at pci0 dev 26 function 7 "Intel 82801I USB" rev 0x02: apic 4 int
17 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb0 at pci0 dev 28 function 0 "Intel 82801I PCIE" rev 0x02: apic 4 int
17 (irq 255)
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 1 "Intel 82801I PCIE" rev 0x02: apic 4 int
20 (irq 255)
pci2 at ppb1 bus 2
ppb2 at pci0 dev 28 function 2 "Intel 82801I PCIE" rev 0x02: apic 4 int
18 (irq 255)
pci3 at ppb2 bus 3
pciide1 at pci3 dev 0 function 0 "Marvell 88SE6101 IDE" rev 0xb1: DMA
(unsupported), channel 0 configured to native-PCI, channel 1 configured
to native-PCI
pciide1: using apic 4 int 18 (irq 9) for native-PCI interrupt
pciide1: channel 0 ignored (not responding; disabled or no drives?)
pciide1: channel 1 ignored (not responding; disabled or no drives?)
ppb3 at pci0 dev 28 function 3 "Intel 82801I PCIE" rev 0x02: apic 4 int
19 (irq 255)
pci4 at ppb3 bus 4
ppb4 at pci0 dev 28 function 4 "Intel 82801I PCIE" rev 0x02: apic 4 int
17 (irq 255)
pci5 at ppb4 bus 5
uhci3 at pci0 dev 29 function 0 "Intel 82801I USB" rev 0x02: apic 4 int
23 (irq 10)
uhci4 at pci0 dev 29 function 1 "Intel 82801I USB" rev 0x02: apic 4 int
19 (irq 11)
uhci5 at pci0 dev 29 function 2 "Intel 82801I USB" rev 0x02: apic 4 int
18 (irq 9)
ehci1 at pci0 dev 29 function 7 "Intel 82801I USB" rev 0x02: apic 4 int
23 (irq 10)
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb5 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0x92
pci6 at ppb5 bus 6
ichpcib0 at pci0 dev 31 function 0 "Intel 82801IO LPC" rev 0x02: PM disabled
ahci0 at pci0 dev 31 function 2 "Intel 82801I AHCI" rev 0x02: apic 4 int
21 (irq 9), AHCI 1.2
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, WDC WD800BD-22MR, 10.0> SCSI3
0/direct fixed
sd0: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301488 sec total
sd1 at scsibus0 targ 1 lun 0: <ATA, WDC WD1200JD-00H, 08.0> SCSI3
0/direct fixed
sd1: 114473MB, 14593 cyl, 255 head, 63 sec, 512 bytes/sec, 234441648 sec
total
sd2 at scsibus0 targ 2 lun 0: <ATA, WDC WD3200AAKS-0, 12.0> SCSI3
0/direct fixed
sd2: 305245MB, 38913 cyl, 255 head, 63 sec, 512 bytes/sec, 625142448 sec
total
sd3 at scsibus0 targ 3 lun 0: <ATA, WDC WD3200AAKS-0, 12.0> SCSI3
0/direct fixed
sd3: 305245MB, 38913 cyl, 255 head, 63 sec, 512 bytes/sec, 625142448 sec
total
sd4 at scsibus0 targ 5 lun 0: <ATA, WDC WD800BD-22MR, 10.0> SCSI3
0/direct fixed
sd4: 76319MB, 9729 cyl, 255 head, 63 sec, 512 bytes/sec, 156301488 sec total
ichiic0 at pci0 dev 31 function 3 "Intel 82801I SMBus" rev 0x02: apic 4
int 18 (irq 9)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem1 at iic0 addr 0x51: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem2 at iic0 addr 0x52: 1GB DDR2 SDRAM non-parity PC2-5300CL5
spdmem3 at iic0 addr 0x53: 1GB DDR2 SDRAM non-parity PC2-5300CL5
usb2 at uhci0: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci1: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci2: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb5 at uhci3: USB revision 1.0
uhub5 at usb5 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb6 at uhci4: USB revision 1.0
uhub6 at usb6 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb7 at uhci5: USB revision 1.0
uhub7 at usb7 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhidev0 at uhub7 port 2 configuration 1 interface 0 "vendor 0x13ba
Generic USB K/B" rev 1.10/0.01 addr 2
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 modifier keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub7 port 2 configuration 1 interface 1 "vendor 0x13ba
Generic USB K/B" rev 1.10/0.01 addr 2
uhidev1: iclass 3/1, 2 report ids
ums0 at uhidev1 reportid 1: 3 buttons and Z dir.
wsmouse0 at ums0 mux 0
uhid0 at uhidev1 reportid 2: input=1, output=0, feature=0
softraid0 at root
root on sd0a swap on sd0b dump on sd0b
WARNING: / was not properly unmounted
uhidev2 at uhub6 port 2 configuration 1 interface 0 "Sun Microsystems
Type 6 Keyboard" rev 1.00/1.02 addr 2
uhidev2: iclass 3/1
ukbd1 at uhidev2: 8 modifier keys, 6 key codes, layout 33
wskbd2 at ukbd1 mux 1
wskbd2: connecting to wsdisplay0
wskbd2: disconnecting from wsdisplay0
wskbd2 detached
ukbd1 detached
uhidev2 detached
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries
ahci0: stopping the port, softreset slot 26 was still active.
uvm_mapent_alloc: out of static map entries
uvm_mapent_alloc: out of static map entries



PP<P8QQP8P9 P&P0QQ P:P>P2 escribiC3:

> On Tue, Nov 2, 2010 at 9:01 PM, Marcos Laufer <[hidden email]> wrote:
>  
>> Hello list,
>>
>> Does anyone know what this means? "ahci0: stopping the port, softreset slot
>> 26 was still active."
>>
>> Does this mean that ahci has been disabled and now disks are working as
>> regular sata disks?
>>    
>
> What do You mean? AHCI is the SATA controller interface, which all the
> regular SATA discks work with.
>
> The message You've cited says that Your AHCI controller disabled some
> port. Unless You provide the full dmesg noone could help You with more
> details.

Reply | Threaded
Open this post in threaded view
|

Re: ahci message

LeviaComm Networks NOC
On 03-Nov-10 08:55, Marcos Laufer wrote:
> Ok here it goes:
>
> OpenBSD 4.3 (GENERIC.MP) #587: Wed Mar 12 11:21:57 MDT 2008

4.3 is no longer supported.  Please upgrade to at least 4.8-stable, your
problem may have been fixed in the past 31 Months since your build.

-Christopher Ahrens
-LeviaComm Networks

Reply | Threaded
Open this post in threaded view
|

Re: ahci message

Marcos Laufer - Ipv4networks.com
Yes , i know i should upgrade . Six months ago i upgraded this machine
from 3.4 to 4.3 version by version,
and it took a long offline time so i had to stay at 4.3 temporarily ,
and i was planning to upgrade it again from 4.3 to 5.0 next november.

I was just curious about this error message because i had never seen it
before.

"ahci0: stopping the port, softreset slot 26 was still active"


I was wondering if after this message appeared at least one sata disk is
no longer working as ahci which
is much faster than regular sata, and a reboot would be needed to put
everything back to normal.

Regards,
Marcos


LeviaComm Networks escribiC3:

> On 03-Nov-10 08:55, Marcos Laufer wrote:
>> Ok here it goes:
>>
>> OpenBSD 4.3 (GENERIC.MP) #587: Wed Mar 12 11:21:57 MDT 2008
>
> 4.3 is no longer supported.  Please upgrade to at least 4.8-stable,
> your problem may have been fixed in the past 31 Months since your build.
>
> -Christopher Ahrens
> -LeviaComm Networks

Reply | Threaded
Open this post in threaded view
|

Re: ahci message

Kevin Chadwick-2
On Wed, 03 Nov 2010 13:37:44 -0300
Marcos Laufer <[hidden email]> wrote:

> Yes , i know i should upgrade . Six months ago i upgraded this machine
> from 3.4 to 4.3 version by version,
> and it took a long offline time so i had to stay at 4.3 temporarily ,
> and i was planning to upgrade it again from 4.3 to 5.0 next november.

OMG, have you considered an install script, sdiff and opening sysmerge
in a text editor might be handy. Takes longer in the short term and
takes a little maintenance itself but means you always have as clean a
ship as can be and a great deal of flexibility for upgrades and
testing!!! and are almost always moving forwards. One reason I hate
windows and linux annoys is cos the devs break all your shit without a
thought. OpenBSD devs do responsible things like add a line to rc.local
that can disable or enable port rcs.

p.s. Anything special to be planned for 5 or just another number.

Reply | Threaded
Open this post in threaded view
|

Re: ahci message

Dmitrij D. Czarkoff-2
In reply to this post by Marcos Laufer - Ipv4networks.com
2010/11/3 Marcos Laufer <[hidden email]>:
> I was wondering if after this message appeared at least one sata disk is no
> longer working as ahci which
> is much faster than regular sata, and a reboot would be needed to put
> everything back to normal.

What do You mean by "regular sata"? The SATA controllers operate in
AHCI modde unless You specificly set IDE emulation in BIOS.

Either Your disk went offline, or it was reattached. It can't go into
IDE emulation mode on its own.

--
Dmitrij D. Czarkoff

Reply | Threaded
Open this post in threaded view
|

Re: ahci message

Philip Guenther-2
In reply to this post by Kevin Chadwick-2
On Wed, Nov 3, 2010 at 8:57 AM, Kevin Chadwick <[hidden email]> wrote:
> p.s. Anything special to be planned for 5 or just another number.

There's been some discussion about resetting the minor version to zero
at that time, but a point of order was raised that that discussion
couldn't proceed until the completion of the vote on switching from
decimal to hex.  It appears the 'hex' vote is being split by the
uppercase-vs-lowercase issue...

Seriously: did anything extra special happen at 2.0?  at 3.0?  at 4.0?
 How many data points does it take to indicate a trend?


Philip Guenther

Reply | Threaded
Open this post in threaded view
|

Re: ahci message

Theo de Raadt
> On Wed, Nov 3, 2010 at 8:57 AM, Kevin Chadwick <[hidden email]> wrote:
> > p.s. Anything special to be planned for 5 or just another number.
>
> There's been some discussion about resetting the minor version to zero
> at that time, but a point of order was raised that that discussion
> couldn't proceed until the completion of the vote on switching from
> decimal to hex.  It appears the 'hex' vote is being split by the
> uppercase-vs-lowercase issue...
>
> Seriously: did anything extra special happen at 2.0?  at 3.0?  at 4.0?
>  How many data points does it take to indicate a trend?

Oh stop spreading mistruths, Philip.  Everyone in the development group
knows that we've decided to move to base 9 from here on out.