Upgrade from 5.7 to 5.8 : bsd.rd doesn't complete boot

classic Classic list List threaded Threaded
8 messages Options
Reply | Threaded
Open this post in threaded view
|

Upgrade from 5.7 to 5.8 : bsd.rd doesn't complete boot

Jean-Philippe Provost
Hi all,

I've downloaded the bsd.rd from the folder 5.8 on ftp.OpenBSD.org and put
it in /.

I reboot and type boot bsd.rd.

It loads, but at the "end", it sticks at *root on rd0a swap on rd0b dump on
rd0b*

​I did the same thing yesterday with my laptop and everything was fine.

Any ideas? The box is a Dell Inspiron ​


--
*Jean-Philippe Provost*

Reply | Threaded
Open this post in threaded view
|

Re: Upgrade from 5.7 to 5.8 : bsd.rd doesn't complete boot

Peter Nicolai Mathias Hansteen
On 10/19/15 22:04, Jean-Philippe Provost wrote:

> Hi all,
>
> I've downloaded the bsd.rd from the folder 5.8 on ftp.OpenBSD.org and put
> it in /.
>
> I reboot and type boot bsd.rd.
>
> It loads, but at the "end", it sticks at *root on rd0a swap on rd0b dump on
> rd0b*
>
> ​I did the same thing yesterday with my laptop and everything was fine.
>
> Any ideas? The box is a Dell Inspiron ​

a dmesg always helps diagnose the problem, see eg
http://www.openbsd.org/faq/faq4.html#getdmesg for how to collect one.

and of course, for a more general (and slightly more verbose) procedure
for reporting bugs, see http://www.openbsd.org/report.html

Good luck!

--
Peter N. M. Hansteen, member of the first RFC 1149 implementation team
http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
"Remember to set the evil bit on all malicious network traffic"
delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.

Reply | Threaded
Open this post in threaded view
|

Re: Upgrade from 5.7 to 5.8 : bsd.rd doesn't complete boot

Jean-Philippe Provost
Hi,

I don't have any CD. I just downloaded the bsd.rd for 5.8 and it wont boot
and ask what I want to do.

Since I have 5.7 installed on it, the dmesg I got is the one from 5.7 boot
and not bsd.rd (5.8) boot.

Am I clear?

--
*Jean-Philippe Provost*


2015-10-19 16:16 GMT-04:00 Peter N. M. Hansteen <[hidden email]>:

> On 10/19/15 22:04, Jean-Philippe Provost wrote:
>
>> Hi all,
>>
>> I've downloaded the bsd.rd from the folder 5.8 on ftp.OpenBSD.org and put
>> it in /.
>>
>> I reboot and type boot bsd.rd.
>>
>> It loads, but at the "end", it sticks at *root on rd0a swap on rd0b dump
>> on
>> rd0b*
>>
>> ​I did the same thing yesterday with my laptop and everything was
fine.

>>
>> Any ideas? The box is a Dell Inspiron ​
>>
>
> a dmesg always helps diagnose the problem, see eg
> http://www.openbsd.org/faq/faq4.html#getdmesg for how to collect one.
>
> and of course, for a more general (and slightly more verbose) procedure
> for reporting bugs, see http://www.openbsd.org/report.html
>
> Good luck!
>
> --
> Peter N. M. Hansteen, member of the first RFC 1149 implementation team
> http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
> "Remember to set the evil bit on all malicious network traffic"
> delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.

Reply | Threaded
Open this post in threaded view
|

Re: Upgrade from 5.7 to 5.8 : bsd.rd doesn't complete boot

Adam Van Ymeren
On 19 Oct 2015 4:55 p.m., "Jean-Philippe Provost" <
[hidden email]> wrote:

>
> Hi,
>
> I don't have any CD. I just downloaded the bsd.rd for 5.8 and it wont boot
> and ask what I want to do.
>
> Since I have 5.7 installed on it, the dmesg I got is the one from 5.7 boot
> and not bsd.rd (5.8) boot.
>
> Am I clear?
>
> --
> *Jean-Philippe Provost*
>
>
> 2015-10-19 16:16 GMT-04:00 Peter N. M. Hansteen <[hidden email]>:
>
> > On 10/19/15 22:04, Jean-Philippe Provost wrote:
> >
> >> Hi all,
> >>
> >> I've downloaded the bsd.rd from the folder 5.8 on ftp.OpenBSD.org and
put
> >> it in /.
> >>
> >> I reboot and type boot bsd.rd.
> >>
> >> It loads, but at the "end", it sticks at *root on rd0a swap on rd0b
dump

> >> on
> >> rd0b*
> >>
> >> ​I did the same thing yesterday with my laptop and everything was
> fine.
> >>
> >> Any ideas? The box is a Dell Inspiron ​
> >>
> >
> > a dmesg always helps diagnose the problem, see eg
> > http://www.openbsd.org/faq/faq4.html#getdmesg for how to collect one.
> >
> > and of course, for a more general (and slightly more verbose) procedure
> > for reporting bugs, see http://www.openbsd.org/report.html
> >
> > Good luck!
> >
> > --
> > Peter N. M. Hansteen, member of the first RFC 1149 implementation team
> > http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
> > "Remember to set the evil bit on all malicious network traffic"
> > delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
>

Do you have a serial port on the machine and another machine available?
You can capture the complete dmesg from the bsd.rd kernel on a second
machine.

Reply | Threaded
Open this post in threaded view
|

Re: Upgrade from 5.7 to 5.8 : bsd.rd doesn't complete boot

patric conant
In reply to this post by Jean-Philippe Provost
On Mon, Oct 19, 2015 at 3:50 PM, Jean-Philippe Provost <
[hidden email]> wrote:

> Hi,
>
> I don't have any CD. I just downloaded the bsd.rd for 5.8 and it wont boot
> and ask what I want to do.
>
> Since I have 5.7 installed on it, the dmesg I got is the one from 5.7 boot
> and not bsd.rd (5.8) boot.
>
> Am I clear?
>
> --
> *Jean-Philippe Provost*
>
>
> 2015-10-19 16:16 GMT-04:00 Peter N. M. Hansteen <[hidden email]>:
>
> > On 10/19/15 22:04, Jean-Philippe Provost wrote:
> >
> >> Hi all,
> >>
> >> I've downloaded the bsd.rd from the folder 5.8 on ftp.OpenBSD.org and
> put
> >> it in /.
> >>
> >> I reboot and type boot bsd.rd.
> >>
> >> It loads, but at the "end", it sticks at *root on rd0a swap on rd0b dump
> >> on
> >> rd0b*
> >>
> >> ​I did the same thing yesterday with my laptop and everything was
> fine.
> >>
> >> Any ideas? The box is a Dell Inspiron ​
> >>
> >
> > a dmesg always helps diagnose the problem, see eg
> > http://www.openbsd.org/faq/faq4.html#getdmesg for how to collect one.
> >
> > and of course, for a more general (and slightly more verbose) procedure
> > for reporting bugs, see http://www.openbsd.org/report.html
> >
> > Good luck!
> >
> > --
> > Peter N. M. Hansteen, member of the first RFC 1149 implementation team
> > http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
> > "Remember to set the evil bit on all malicious network traffic"
> > delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
>
>
Please send the available dmesg.

Reply | Threaded
Open this post in threaded view
|

Re: Upgrade from 5.7 to 5.8 : bsd.rd doesn't complete boot

Jean-Philippe Provost
Here it is :

OpenBSD 5.7-stable (GENERIC.MP) #1: Fri Oct 16 18:59:45 EDT 2015
    [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.
MP
real mem = 6215434240 (5927MB)
avail mem = 6046064640 (5765MB)
mpath0 at root
scsibus0 at mpath0: 256 targets
mainbus0 at root
bios0 at mainbus0: SMBIOS rev. 2.6 @ 0xfcb40 (45 entries)
bios0: vendor Dell Inc. version "A07" date 11/13/2010
bios0: Dell Inc. Inspiron 580s
acpi0 at bios0: rev 2
acpi0: sleep states S0 S3 S4 S5
acpi0: tables DSDT FACP APIC MCFG SLIC OSFR OEMB HPET ASF! GSCI SSDT
acpi0: wakeup devices P0P1(S4) P0P3(S4) P0P4(S4) P0P5(S4) P0P6(S4)
BR1E(S4) PS2K(S4) PS2M(S4) USB0(S4) USB1(S4) USB2(S4) USB3(S4)
USB4(S4) USB5(S4) USB6(S4) BR20(S4) [...]
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz, 3192.37 MHz
cpu0:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF
,PERF,ITSC
cpu0: 256KB 64b/line 8-way L2 cache
cpu0: smt 0, core 0, package 0
mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
cpu0: apic clock running at 132MHz
cpu0: mwait min=64, max=64, C-substates=0.2.1.1.0, IBE
cpu1 at mainbus0: apid 4 (application processor)
cpu1: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz, 3191.99 MHz
cpu1:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF
,PERF,ITSC
cpu1: 256KB 64b/line 8-way L2 cache
cpu1: smt 0, core 2, package 0
cpu2 at mainbus0: apid 1 (application processor)
cpu2: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz, 3191.99 MHz
cpu2:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF
,PERF,ITSC
cpu2: 256KB 64b/line 8-way L2 cache
cpu2: smt 1, core 0, package 0
cpu3 at mainbus0: apid 5 (application processor)
cpu3: Intel(R) Core(TM) i5 CPU 650 @ 3.20GHz, 3191.99 MHz
cpu3:
FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,PBE,SSE3,PCLMUL,DTES64,MWAIT,DS-CPL,VMX
,SMX,EST,TM2,SSSE3,CX16,xTPR,PDCM,PCID,SSE4.1,SSE4.2,POPCNT,AES,NXE,LONG,LAHF
,PERF,ITSC
cpu3: 256KB 64b/line 8-way L2 cache
cpu3: smt 1, core 2, package 0
ioapic0 at mainbus0: apid 6 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 1, remapped to apid 6
acpimcfg0 at acpi0 addr 0xe0000000, bus 0-255
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (BR1E)
acpiprt2 at acpi0: bus 1 (BR20)
acpiprt3 at acpi0: bus -1 (BR24)
acpiprt4 at acpi0: bus 2 (BR25)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpicpu2 at acpi0: C3, C2, C1, PSS
acpicpu3 at acpi0: C3, C2, C1, PSS
acpibtn0 at acpi0: SLPB
acpibtn1 at acpi0: PWRB
cpu0: Enhanced SpeedStep 3192 MHz: speeds: 3201, 3200, 3067, 2933,
2800, 2667, 2533, 2400, 2267, 2133, 2000, 1867, 1733, 1600, 1467,
1333, 1200 MHz
pci0 at mainbus0 bus 0
pchb0 at pci0 dev 0 function 0 "Intel Core Host" rev 0x18
vga1 at pci0 dev 2 function 0 "Intel HD Graphics" rev 0x18
intagp0 at vga1
agp0 at intagp0: aperture at 0xd0000000, size 0x10000000
inteldrm0 at vga1
drm0 at inteldrm0
inteldrm0: 1440x900
wsdisplay0 at vga1 mux 1: console (std, vt100 emulation)
wsdisplay0: screen 1-5 added (std, vt100 emulation)
"Intel 3400 MEI" rev 0x06 at pci0 dev 22 function 0 not configured
ehci0 at pci0 dev 26 function 0 "Intel 3400 USB" rev 0x06: apic 6 int 16
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
azalia0 at pci0 dev 27 function 0 "Intel 3400 HD Audio" rev 0x06: msi
azalia0: codecs: Realtek/0x0887, Intel/0x2804, using Realtek/0x0887
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 3400 PCIE" rev 0x06: msi
pci1 at ppb0 bus 1
ppb1 at pci0 dev 28 function 5 "Intel 3400 PCIE" rev 0x06
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM57788" rev 0x01, BCM57780
A1 (0x57780001): msi, address 84:2b:2b:ba:07:82
brgphy0 at bge0 phy 1: BCM57780 10/100/1000baseT PHY, rev. 1
ehci1 at pci0 dev 29 function 0 "Intel 3400 USB" rev 0x06: apic 6 int 23
usb1 at ehci1: USB revision 2.0
uhub1 at usb1 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BA Hub-to-PCI" rev 0xa6
pci3 at ppb2 bus 3
pcib0 at pci0 dev 31 function 0 "Intel H57 LPC" rev 0x06
pciide0 at pci0 dev 31 function 2 "Intel 3400 SATA" rev 0x06: DMA,
channel 0 configured to native-PCI, channel 1 configured to native-PCI
pciide0: using apic 6 int 19 for native-PCI interrupt
wd0 at pciide0 channel 0 drive 0: <WDC WD1001FAES-75W7A0>
wd0: 16-sector PIO, LBA48, 953869MB, 1953525168 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 6
atapiscsi0 at pciide0 channel 1 drive 0
scsibus1 at atapiscsi0: 2 targets
cd0 at scsibus1 targ 0 lun 0: <HL-DT-ST, DVD+-RW GH50N, B104> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
ichiic0 at pci0 dev 31 function 3 "Intel 3400 SMBus" rev 0x06: apic 6 int 18
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 2GB DDR3 SDRAM PC3-10600
spdmem1 at iic0 addr 0x51: 2GB DDR3 SDRAM PC3-10600
spdmem2 at iic0 addr 0x52: 2GB DDR3 SDRAM PC3-10600
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
spkr0 at pcppi0
it0 at isa0 port 0x2e/2: IT8721F rev 2, EC port 0xa10
uhub2 at uhub0 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
uhub3 at uhub1 port 1 "Intel Rate Matching Hub" rev 2.00/0.00 addr 2
umass0 at uhub3 port 2 configuration 1 interface 0 "Generic Mass
Storage Device" rev 2.00/1.00 addr 3
umass0: using SCSI over Bulk-Only
scsibus2 at umass0: 2 targets, initiator 0
sd0 at scsibus2 targ 1 lun 0: <Generic-, SD/MMC, 1.00> SCSI0 0/direct
removable
sd1 at scsibus2 targ 1 lun 1: <Generic-, Compact Flash, 1.01> SCSI0
0/direct removable
sd2 at scsibus2 targ 1 lun 2: <Generic-, SM/xD-Picture, 1.02> SCSI0
0/direct removable
sd3 at scsibus2 targ 1 lun 3: <Generic-, MS/MS-Pro, 1.03> SCSI0
0/direct removable
umass1 at uhub3 port 3 configuration 1 interface 0 "Generic Mass
Storage" rev 2.00/1.03 addr 4
umass1: using SCSI over Bulk-Only
scsibus3 at umass1: 2 targets, initiator 0
sd4 at scsibus3 targ 1 lun 0: <Generic, Flash Disk, 8.07> SCSI2
0/direct removable
sd4: 3940MB, 512 bytes/sector, 8069120 sectors
uhidev0 at uhub3 port 4 configuration 1 interface 0 "Microsoft
Microsoft\M-. 2.4GHz Transceiver v8.0" rev 2.00/6.56 addr 5
uhidev0: iclass 3/1
ukbd0 at uhidev0: 8 variable keys, 6 key codes
wskbd1 at ukbd0 mux 1
wskbd1: connecting to wsdisplay0
uhidev1 at uhub3 port 4 configuration 1 interface 1 "Microsoft
Microsoft\M-. 2.4GHz Transceiver v8.0" rev 2.00/6.56 addr 5
uhidev1: iclass 3/1, 28 report ids
uhid0 at uhidev1 reportid 18: input=0, output=0, feature=1
uhid1 at uhidev1 reportid 22: input=4, output=0, feature=0
uhid2 at uhidev1 reportid 23: input=0, output=0, feature=1
ums0 at uhidev1 reportid 26: 5 buttons, Z dir
wsmouse0 at ums0 mux 0
uhid3 at uhidev1 reportid 28: input=3, output=0, feature=0
uhidev2 at uhub3 port 4 configuration 1 interface 2 "Microsoft
Microsoft\M-. 2.4GHz Transceiver v8.0" rev 2.00/6.56 addr 5
uhidev2: iclass 3/0, 8 report ids
uhid4 at uhidev2 reportid 3: input=1, output=0, feature=0
uhid5 at uhidev2 reportid 4: input=1, output=0, feature=0
uhid6 at uhidev2 reportid 7: input=7, output=0, feature=0
uhid7 at uhidev2 reportid 8: input=1, output=0, feature=0
vscsi0 at root
scsibus4 at vscsi0: 256 targets
softraid0 at root
scsibus5 at softraid0: 256 targets
root on wd0a (6f9940bc0ff88ee5.a) swap on wd0b dump on wd0b


--
*Jean-Philippe Provost*
418.254.2877

2015-10-19 17:05 GMT-04:00 patric conant <[hidden email]>:

>
> On Mon, Oct 19, 2015 at 3:50 PM, Jean-Philippe Provost <
> [hidden email]> wrote:
>
>> Hi,
>>
>> I don't have any CD. I just downloaded the bsd.rd for 5.8 and it wont boot
>> and ask what I want to do.
>>
>> Since I have 5.7 installed on it, the dmesg I got is the one from 5.7 boot
>> and not bsd.rd (5.8) boot.
>>
>> Am I clear?
>>
>> --
>> *Jean-Philippe Provost*
>>
>>
>> 2015-10-19 16:16 GMT-04:00 Peter N. M. Hansteen <[hidden email]>:
>>
>> > On 10/19/15 22:04, Jean-Philippe Provost wrote:
>> >
>> >> Hi all,
>> >>
>> >> I've downloaded the bsd.rd from the folder 5.8 on ftp.OpenBSD.org and
>> put
>> >> it in /.
>> >>
>> >> I reboot and type boot bsd.rd.
>> >>
>> >> It loads, but at the "end", it sticks at *root on rd0a swap on rd0b
>> dump
>> >> on
>> >> rd0b*
>> >>
>> >> ​I did the same thing yesterday with my laptop and everything
was

>> fine.
>> >>
>> >> Any ideas? The box is a Dell Inspiron ​
>> >>
>> >
>> > a dmesg always helps diagnose the problem, see eg
>> > http://www.openbsd.org/faq/faq4.html#getdmesg for how to collect one.
>> >
>> > and of course, for a more general (and slightly more verbose) procedure
>> > for reporting bugs, see http://www.openbsd.org/report.html
>> >
>> > Good luck!
>> >
>> > --
>> > Peter N. M. Hansteen, member of the first RFC 1149 implementation team
>> > http://bsdly.blogspot.com/ http://www.bsdly.net/ http://www.nuug.no/
>> > "Remember to set the evil bit on all malicious network traffic"
>> > delilah spamd[29949]: 85.152.224.147: disconnected after 42673 seconds.
>>
>>
> Please send the available dmesg.

Reply | Threaded
Open this post in threaded view
|

Re: Upgrade from 5.7 to 5.8 : bsd.rd doesn't complete boot

Raf Czlonka-2
In reply to this post by Jean-Philippe Provost
On Mon, Oct 19, 2015 at 09:50:22PM BST, Jean-Philippe Provost wrote:

> Hi,

Hi,

> I don't have any CD. I just downloaded the bsd.rd for 5.8 and it wont
> boot and ask what I want to do.

What do you mean by that?

Does it give you the options to install, upgrade, etc.?

Does it look anything like described in the FAQ[0]?

> Since I have 5.7 installed on it, the dmesg I got is the one from 5.7
> boot and not bsd.rd (5.8) boot.
>
> Am I clear?

No, not really.

Raf

[0] http://www.openbsd.org/faq/faq4.html#InstStart

Reply | Threaded
Open this post in threaded view
|

Re: Upgrade from 5.7 to 5.8 : bsd.rd doesn't complete boot

janus
In reply to this post by Jean-Philippe Provost
Hi Jean-Philippe,

- which bsd.rd do you use ? amd64 or i386 one?
- I do understand that you probably want to run release, but can you try bsd.rd from snapshot too? Does it boot?
- can you try to make bootable USB using  miniroot58.fs for snapshot and/or 5.8 release?

Jan



On Mon, Oct 19, 2015 at 04:50:22PM -0400, Jean-Philippe Provost wrote:

> Hi,
>
> I don't have any CD. I just downloaded the bsd.rd for 5.8 and it wont boot
> and ask what I want to do.
>
> Since I have 5.7 installed on it, the dmesg I got is the one from 5.7 boot
> and not bsd.rd (5.8) boot.
>
> Am I clear?
>
> --
> *Jean-Philippe Provost*