Update to allow another variant of Socket 10/100 CF+ Ethernet card to work

classic Classic list List threaded Threaded
3 messages Options
Reply | Threaded
Open this post in threaded view
|

Update to allow another variant of Socket 10/100 CF+ Ethernet card to work

asmith-4
Hi,

Patrick Heim purchased a Socket 10/100 CF+ card, a card which I enabled. His
card, however, didn't seem to work.

I was interested, so I took a look at the problem and it appears Socket are
shipping the card also with a Linksys vendor code.

Note that both the original card with the original vendor code and this new
card are labelled version 1.0 - hmm.

Anyway a quick patch makes it work..

sys_dev_pcmcia_if_ne_pcmcia-Socket10_100_Linksys_ID.diff

--- if_ne_pcmcia.c.orig Thu Aug  3 07:58:03 2006
+++ if_ne_pcmcia.c Sat Sep  9 10:07:10 2006
@@ -413,10 +413,14 @@
     { PCMCIA_VENDOR_SOCKET, PCMCIA_PRODUCT_SOCKET_LP_ETHER,
       PCMCIA_CIS_SOCKET_LP_ETHER,
       0, -1, { 0x00, 0xc0, 0x1b } },
-
+      
     { PCMCIA_VENDOR_SOCKET, PCMCIA_PRODUCT_SOCKET_ETHER_CF_10_100,
       PCMCIA_CIS_SOCKET_ETHER_CF_10_100,
       0, -1, { 0x00, 0x12, 0x0e } },
+      
+    { PCMCIA_VENDOR_SOCKET, PCMCIA_PRODUCT_SOCKET_ETHER_CF_10_100,
+      PCMCIA_CIS_SOCKET_ETHER_CF_10_100,
+      0, -1, { 0x00, 0xe0, 0x98 } },  
 
     { PCMCIA_VENDOR_XIRCOM, PCMCIA_PRODUCT_XIRCOM_CFE_10,
       PCMCIA_CIS_XIRCOM_CFE_10,

Reply | Threaded
Open this post in threaded view
|

Re: Update to allow another variant of Socket 10/100 CF+ Ethernet card to work

Federico Schwindt-2
On Sun, Sep 10, 2006 at 08:49:04PM +0100, Andrew Smith wrote:

> Hi,
>
> Patrick Heim purchased a Socket 10/100 CF+ card, a card which I enabled. His
> card, however, didn't seem to work.
>
> I was interested, so I took a look at the problem and it appears Socket are
> shipping the card also with a Linksys vendor code.
>
> Note that both the original card with the original vendor code and this new
> card are labelled version 1.0 - hmm.
>
> Anyway a quick patch makes it work..
>
> sys_dev_pcmcia_if_ne_pcmcia-Socket10_100_Linksys_ID.diff

  can we have dmesg please? btw, does the vendor you added matches the
one in the card, right?
  cheers,

  f.-

Reply | Threaded
Open this post in threaded view
|

Re: Update to allow another variant of Socket 10/100 CF+ Ethernet card to work

asmith-4
In reply to this post by asmith-4
From Patricks card (running the patch on this thread)..

ne0 at pcmcia1 function 0 "Socket, CF+ 10/100 Ethernet, 1.0" port 0x0/32,
irq 137, address 00:e0:98:xx:xx:xx
acphy0 at ne0 phy 1: AC101 10/100 PHY, rev. 11 boot device: wd0.

and from the card that I used when I used to enable the driver in the first
place...

ne0 at pcmcia1 function 0 "Socket, CF+ 10/100 Ethernet, 1.0" port 0x0/32,
irq 137, address 00:12:0e:xx:xx:xx
acphy0 at ne0 phy 1: AC101 10/100 PHY, rev. 11


The PCMCIA vendor and Product ID is identical, the patch simply adds the
linksys vendor code shown in Patricks dmesg..

-Andy

-----Original Message-----
From: [hidden email] [mailto:[hidden email]] On Behalf Of
Federico Schwindt
Sent: 10 September 2006 20:59
To: Andrew Smith
Cc: [hidden email]
Subject: Re: Update to allow another variant of Socket 10/100 CF+ Ethernet
card to work

On Sun, Sep 10, 2006 at 08:49:04PM +0100, Andrew Smith wrote:
> Hi,
>
> Patrick Heim purchased a Socket 10/100 CF+ card, a card which I enabled.
His
> card, however, didn't seem to work.
>
> I was interested, so I took a look at the problem and it appears Socket
are
> shipping the card also with a Linksys vendor code.
>
> Note that both the original card with the original vendor code and this
new
> card are labelled version 1.0 - hmm.
>
> Anyway a quick patch makes it work..
>
> sys_dev_pcmcia_if_ne_pcmcia-Socket10_100_Linksys_ID.diff

  can we have dmesg please? btw, does the vendor you added matches the
one in the card, right?
  cheers,

  f.-