Thinkpad T43 sound not configured

classic Classic list List threaded Threaded
4 messages Options
Reply | Threaded
Open this post in threaded view
|

Thinkpad T43 sound not configured

Mihai Popescu B.S.
Hello,

I was trying to install OpenBSD-current on a Thinkpad T43, model
2669-R1G. I used the .iso file to create the CD-ROM and run it for
install.
The strange fact is that soundcard and SMBus devices are not
configured. The hardware is Intel 82801FB with AD1981B AC97 v2.2.
I searched about some problems like that, but I see people on internet
having succes installing this kind of laptop. I also have a Dell
Precision 307 workstation with the same chipset who is working fine.
Any help will be welcome, please see the dmesg.

OpenBSD 4.9-current (RAMDISK_CD) #64: Thu May 12 09:53:20 MDT 2011
    [hidden email]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
cpu0: Intel(R) Pentium(R) M processor 1.86GHz ("GenuineIntel"
686-class) 1.87 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
real mem  = 1072099328 (1022MB)
avail mem = 1047584768 (999MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 08/21/06, BIOS32 rev. 0 @
0xfd760, SMBIOS rev. 2.33 @ 0xe0010 (64 entries)
bios0: vendor IBM version "1YET65WW (1.29 )" date 08/21/2006
bios0: IBM 2669R1G
apm0 at bios0: Power Management spec V1.2
acpi at bios0 function 0x0 not configured
pcibios0 at bios0: rev 2.1 @ 0xfd6f0/0x910
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
pcibios0: PCI bus #12 is the last bus
bios0: ROM list: 0xc0000/0x10000 0xdc000/0x4000! 0xe0000/0x10000
cpu0 at mainbus0: (uniprocessor)
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
io address conflict 0x5800/0x8
io address conflict 0x5808/0x4
io address conflict 0x5810/0x8
io address conflict 0x580c/0x4
pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
ppb0 at pci0 dev 1 function 0 "Intel 82915GM PCIE" rev 0x03: irq 11
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M300 M22" rev 0x00
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 11
pci2 at ppb1 bus 2
bge0 at pci2 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1
(0x4101): irq 11, address 00:15:58:09:c5:1d
brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03: irq 5
pci3 at ppb2 bus 3
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
pci4 at ppb3 bus 11
cbb0 at pci4 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11
iwi0 at pci4 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05:
irq 11, address 00:16:6f:14:95:fe
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 12 device 0 cacheline 0x0, lattimer 0xb0
pcmcia0 at cardslot0
"Intel 82801FB AC97" rev 0x03 at pci0 dev 30 function 2 not configured
pcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03
pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA,
channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <HTS541040G9AT00>
wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4242N, 0J05> ATAPI
5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
"Intel 82801FB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at pcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
rd0: fixed, 3872 blocks
softraid0 at root
root on rd0a swap on rd0b dump on rd0b
umass0 at uhub0 port 4 configuration 1 interface 0 "SanDisk Cruzer
Micro" rev 2.00/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
sd0 at scsibus1 targ 1 lun 0: <SanDisk, Cruzer Micro, 8.02> SCSI0
0/direct removable serial.07815151800815505A4B
sd0: 7663MB, 512 bytes/sec, 15695871 sec total

Reply | Threaded
Open this post in threaded view
|

Re: Thinkpad T43 sound not configured

Jonathan Gray
This is expected, sound and i2c drivers are not included
on ramdisks, install the system and use GENERIC and they will appear.

On Fri, Jun 17, 2011 at 11:29:51AM +0300, Mihai Popescu wrote:

> Hello,
>
> I was trying to install OpenBSD-current on a Thinkpad T43, model
> 2669-R1G. I used the .iso file to create the CD-ROM and run it for
> install.
> The strange fact is that soundcard and SMBus devices are not
> configured. The hardware is Intel 82801FB with AD1981B AC97 v2.2.
> I searched about some problems like that, but I see people on internet
> having succes installing this kind of laptop. I also have a Dell
> Precision 307 workstation with the same chipset who is working fine.
> Any help will be welcome, please see the dmesg.
>
> OpenBSD 4.9-current (RAMDISK_CD) #64: Thu May 12 09:53:20 MDT 2011
>     [hidden email]:/usr/src/sys/arch/i386/compile/RAMDISK_CD
> cpu0: Intel(R) Pentium(R) M processor 1.86GHz ("GenuineIntel"
> 686-class) 1.87 GHz
> cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,TM,SBF,EST,TM2
> real mem  = 1072099328 (1022MB)
> avail mem = 1047584768 (999MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 08/21/06, BIOS32 rev. 0 @
> 0xfd760, SMBIOS rev. 2.33 @ 0xe0010 (64 entries)
> bios0: vendor IBM version "1YET65WW (1.29 )" date 08/21/2006
> bios0: IBM 2669R1G
> apm0 at bios0: Power Management spec V1.2
> acpi at bios0 function 0x0 not configured
> pcibios0 at bios0: rev 2.1 @ 0xfd6f0/0x910
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xfdeb0/256 (14 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82371FB ISA" rev 0x00)
> pcibios0: PCI bus #12 is the last bus
> bios0: ROM list: 0xc0000/0x10000 0xdc000/0x4000! 0xe0000/0x10000
> cpu0 at mainbus0: (uniprocessor)
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> io address conflict 0x5800/0x8
> io address conflict 0x5808/0x4
> io address conflict 0x5810/0x8
> io address conflict 0x580c/0x4
> pchb0 at pci0 dev 0 function 0 "Intel 82915GM Host" rev 0x03
> ppb0 at pci0 dev 1 function 0 "Intel 82915GM PCIE" rev 0x03: irq 11
> pci1 at ppb0 bus 1
> vga1 at pci1 dev 0 function 0 "ATI Radeon Mobility M300 M22" rev 0x00
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> ppb1 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03: irq 11
> pci2 at ppb1 bus 2
> bge0 at pci2 dev 0 function 0 "Broadcom BCM5751M" rev 0x11, BCM5750 B1
> (0x4101): irq 11, address 00:15:58:09:c5:1d
> brgphy0 at bge0 phy 1: BCM5750 10/100/1000baseT PHY, rev. 0
> ppb2 at pci0 dev 28 function 2 "Intel 82801FB PCIE" rev 0x03: irq 5
> pci3 at ppb2 bus 3
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 11
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 11
> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 11
> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb3 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xd3
> pci4 at ppb3 bus 11
> cbb0 at pci4 dev 0 function 0 "Ricoh 5C476 CardBus" rev 0x8d: irq 11
> iwi0 at pci4 dev 2 function 0 "Intel PRO/Wireless 2200BG" rev 0x05:
> irq 11, address 00:16:6f:14:95:fe
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 12 device 0 cacheline 0x0, lattimer 0xb0
> pcmcia0 at cardslot0
> "Intel 82801FB AC97" rev 0x03 at pci0 dev 30 function 2 not configured
> pcib0 at pci0 dev 31 function 0 "Intel 82801FBM LPC" rev 0x03
> pciide0 at pci0 dev 31 function 2 "Intel 82801FBM SATA" rev 0x03: DMA,
> channel 0 wired to compatibility, channel 1 wired to compatibility
> wd0 at pciide0 channel 0 drive 0: <HTS541040G9AT00>
> wd0: 16-sector PIO, LBA, 38154MB, 78140160 sectors
> wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
> atapiscsi0 at pciide0 channel 1 drive 0
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <HL-DT-ST, RW/DVD GCC-4242N, 0J05> ATAPI
> 5/cdrom removable
> cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
> "Intel 82801FB SMBus" rev 0x03 at pci0 dev 31 function 3 not configured
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at pcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> rd0: fixed, 3872 blocks
> softraid0 at root
> root on rd0a swap on rd0b dump on rd0b
> umass0 at uhub0 port 4 configuration 1 interface 0 "SanDisk Cruzer
> Micro" rev 2.00/2.00 addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> sd0 at scsibus1 targ 1 lun 0: <SanDisk, Cruzer Micro, 8.02> SCSI0
> 0/direct removable serial.07815151800815505A4B
> sd0: 7663MB, 512 bytes/sec, 15695871 sec total

Reply | Threaded
Open this post in threaded view
|

Re: Thinkpad T43 sound not configured

Mihai Popescu B.S.
In reply to this post by Mihai Popescu B.S.
Oh, so the (G) remark in supported hardware list is taking its share
then. I was unsure if .iso method is using GENERIC kernel.

What about I/O conflicts listed in dmesg, is there a way to fix them?

Thanks.

Reply | Threaded
Open this post in threaded view
|

Re: Thinkpad T43 sound not configured

Ted Unangst-2
On Fri, Jun 17, 2011 at 7:19 AM, Mihai Popescu <[hidden email]> wrote:
> Oh, so the (G) remark in supported hardware list is taking its share
> then. I was unsure if .iso method is using GENERIC kernel.
>
> What about I/O conflicts listed in dmesg, is there a way to fix them?

Install the system, see what works and what doesn't.  Then go looking
for problems.  No need to invent problems.