Terrible messages in /var/log/messages

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

Terrible messages in /var/log/messages

EJECT
Hello misc,

 After boot I see alot of terrible messages in /var/log/messages which
 are added to it every second.

 It look like driver bug. Maybe somebody can help resolve this
 problem.

 content of /var/run/dmsg.boot

OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
cpu0: Intel(R) Pentium(R) 4 CPU 2.93GHz ("GenuineIntel" 686-class) 2.94 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT                                         ,TM,SBF,SSE3,MWAIT,DS-CPL,CNXT-ID,xTPR
real mem  = 527790080 (503MB)
avail mem = 502685696 (479MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 01/23/06, BIOS32 rev. 0 @ 0xf0010, SMBIOS rev. 2.4 @ 0xf04d0 (45 entries)
bios0: vendor American Megatrends Inc. version "3.28    " date 01/23/2006
bios0: Compaq Presario 061 PJ534AA-ABA SR1250NX NA440
apm0 at bios0: Power Management spec V1.2
apm0: AC on, battery charge unknown
apm0: flags 30102 dobusy 0 doidle 1
pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf8c60/304 (17 entries)
pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev 0x00)
pcibios0: PCI bus #2 is the last bus
bios0: ROM list: 0xc0000/0xa400!
cpu0 at mainbus0
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82915G/P/GV Host" rev 0x04
vga1 at pci0 dev 2 function 0 "Intel 82915G/P/GV Video" rev 0x04: aperture at 0xd0000000, size 0x10000000
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x03: irq 10
azalia0: host: High Definition Audio rev. 1.0
azalia0: codec: Realtek ALC880 (rev. 5.0), HDA version 0.9
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
pci1 at ppb0 bus 1
uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 3
uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 5
uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 10
ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
ehci0: timed out waiting for BIOS
usb0 at ehci0: USB revision 2.0
uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3
pci2 at ppb1 bus 2
"VIA VT6306 FireWire" rev 0x80 at pci2 dev 1 function 0 not configured
rl0 at pci2 dev 2 function 0 "Realtek 8139" rev 0x10: irq 6, address 00:11:2f:d7:ff:29
rlphy0 at rl0 phy 0: RTL internal PHY
sis0 at pci2 dev 3 function 0 "NS DP83815 10/100" rev 0x00, DP83815C: irq 3, address 00:a0:cc:a1:60:bb
nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x03: DMA, channel 0 wired to compatibility, channel 1 wir                                         ed to compatibility
wd0 at pciide0 channel 1 drive 0: <ST3120025A>
wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
atapiscsi0 at pciide0 channel 1 drive 1
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <GENERIC, DVD RW 12XMax, 100I> SCSI0 5/cdrom removable
wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03: irq 10
iic0 at ichiic0
adt0 at iic0 addr 0x2e: sch5017 rev 0x89
usb1 at uhci0: USB revision 1.0
uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
lpt0 at isa0 port 0x378/4 irq 7
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
biomask ff3d netmask ff7d ttymask ffff
pctr: user-level cycle counter enabled
mtrr: Pentium Pro MTRR support
ichiic0: exec: op 1, addr 0x2e, cmdlen 1, len 1, flags 0x00: timeout, status 0x40<INUSE>
ichiic0: abort failed, status 0x42<INTR,INUSE>
ichiic0: exec: op 1, addr 0x2e, cmdlen 1, len 1, flags 0x00: timeout, status 0x0
ichiic0: abort failed, status 0x42<INTR,INUSE>
umass0 at uhub4 port 1 configuration 1 interface 0
umass0: vendor 0x058f USB Reader, rev 1.10/1.00, addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0 0/direct removable
sd0: drive offline
sd1 at scsibus1 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0 0/direct removable
sd1: drive offline
sd2 at scsibus1 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0 0/direct removable
sd2: drive offline
sd3 at scsibus1 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0 0/direct removable
sd3: drive offline
dkcsum: wd0 matches BIOS drive 0x80
root on wd0a swap on wd0b dump on wd0b


Tail of /var/log/messages (all file is filled of same messages)

bash-3.2# tail -f /var/log/messages
Nov 21 05:39:24 mail /bsd: ichiic0: exec: op 1, addr 0x2e, cmdlen 1, len 1, flags 0x00: timeout, status 0x0
Nov 21 05:39:24 mail /bsd: ichiic0: abort failed, status 0x42<INTR,INUSE>
Nov 21 05:39:25 mail /bsd: ichiic0: exec: op 1, addr 0x2e, cmdlen 1, len 1, flags 0x00: timeout, status 0x0
Nov 21 05:39:25 mail /bsd: ichiic0: abort failed, status 0x42<INTR,INUSE>
Nov 21 05:39:26 mail /bsd: ichiic0: exec: op 1, addr 0x2e, cmdlen 1, len 1, flags 0x00: timeout, status 0x0
Nov 21 05:39:26 mail /bsd: ichiic0: abort failed, status 0x42<INTR,INUSE>
Nov 21 05:39:27 mail /bsd: ichiic0: exec: op 1, addr 0x2e, cmdlen 1, len 1, flags 0x00: timeout, status 0x0
Nov 21 05:39:27 mail /bsd: ichiic0: abort failed, status 0x42<INTR,INUSE>
Nov 21 05:39:28 mail /bsd: ichiic0: exec: op 1, addr 0x2e, cmdlen 1, len 1, flags 0x00: timeout, status 0x0
Nov 21 05:39:28 mail /bsd: ichiic0: abort failed, status 0x42<INTR,INUSE>


Thanks!

--
Best regards,
 Evgeniy                          mailto:[hidden email]

Reply | Threaded
Open this post in threaded view
|

Re: Terrible messages in /var/log/messages

asmith-4
Are you actually using the I2C interface for anything?

It may be that you have a variant of the hardware that isn't quite  
supported and it should be possible to disable the driver in the  
kernel and avoid these messages.

-Andy

On 21 Nov 2007, at 11:47, Evgeniy Sudyr wrote:

> Hello misc,
>
> After boot I see alot of terrible messages in /var/log/messages which
> are added to it every second.
>
> It look like driver bug. Maybe somebody can help resolve this
> problem.
>
> content of /var/run/dmsg.boot
>
> OpenBSD 4.2 (GENERIC) #375: Tue Aug 28 10:38:44 MDT 2007
>    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC
> cpu0: Intel(R) Pentium(R) 4 CPU 2.93GHz ("GenuineIntel" 686-class)  
> 2.94 GHz
> cpu0:  
> FPU
> ,V86
> ,DE
> ,PSE
> ,TSC
> ,MSR
> ,PAE
> ,MCE
> ,CX8
> ,APIC
> ,SEP
> ,MTRR
> ,PGE
> ,MCA
> ,CMOV
> ,PAT
> ,PSE36
> ,CFLUSH
> ,DS
> ,ACPI
> ,MMX
> ,FXSR
> ,SSE
> ,SSE2
> ,SS
> ,HTT                                         ,TM,SBF,SSE3,MWAIT,DS-
> CPL,CNXT-ID,xTPR
> real mem  = 527790080 (503MB)
> avail mem = 502685696 (479MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 01/23/06, BIOS32 rev. 0 @  
> 0xf0010, SMBIOS rev. 2.4 @ 0xf04d0 (45 entries)
> bios0: vendor American Megatrends Inc. version "3.28    " date  
> 01/23/2006
> bios0: Compaq Presario 061 PJ534AA-ABA SR1250NX NA440
> apm0 at bios0: Power Management spec V1.2
> apm0: AC on, battery charge unknown
> apm0: flags 30102 dobusy 0 doidle 1
> pcibios0 at bios0: rev 2.1 @ 0xf0000/0x10000
> pcibios0: PCI IRQ Routing Table rev 1.0 @ 0xf8c60/304 (17 entries)
> pcibios0: PCI Interrupt Router at 000:31:0 ("Intel 82801FB LPC" rev  
> 0x00)
> pcibios0: PCI bus #2 is the last bus
> bios0: ROM list: 0xc0000/0xa400!
> cpu0 at mainbus0
> pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82915G/P/GV Host" rev 0x04
> vga1 at pci0 dev 2 function 0 "Intel 82915G/P/GV Video" rev 0x04:  
> aperture at 0xd0000000, size 0x10000000
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> azalia0 at pci0 dev 27 function 0 "Intel 82801FB HD Audio" rev 0x03:  
> irq 10
> azalia0: host: High Definition Audio rev. 1.0
> azalia0: codec: Realtek ALC880 (rev. 5.0), HDA version 0.9
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801FB PCIE" rev 0x03
> pci1 at ppb0 bus 1
> uhci0 at pci0 dev 29 function 0 "Intel 82801FB USB" rev 0x03: irq 11
> uhci1 at pci0 dev 29 function 1 "Intel 82801FB USB" rev 0x03: irq 3
> uhci2 at pci0 dev 29 function 2 "Intel 82801FB USB" rev 0x03: irq 5
> uhci3 at pci0 dev 29 function 3 "Intel 82801FB USB" rev 0x03: irq 10
> ehci0 at pci0 dev 29 function 7 "Intel 82801FB USB" rev 0x03: irq 11
> ehci0: timed out waiting for BIOS
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0: Intel EHCI root hub, rev 2.00/1.00, addr 1
> ppb1 at pci0 dev 30 function 0 "Intel 82801BA AGP" rev 0xd3
> pci2 at ppb1 bus 2
> "VIA VT6306 FireWire" rev 0x80 at pci2 dev 1 function 0 not configured
> rl0 at pci2 dev 2 function 0 "Realtek 8139" rev 0x10: irq 6, address  
> 00:11:2f:d7:ff:29
> rlphy0 at rl0 phy 0: RTL internal PHY
> sis0 at pci2 dev 3 function 0 "NS DP83815 10/100" rev 0x00,  
> DP83815C: irq 3, address 00:a0:cc:a1:60:bb
> nsphyter0 at sis0 phy 0: DP83815 10/100 PHY, rev. 1
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801FB LPC" rev 0x03: PM  
> disabled
> pciide0 at pci0 dev 31 function 2 "Intel 82801FB SATA" rev 0x03:  
> DMA, channel 0 wired to compatibility, channel 1  
> wir                                         ed to compatibility
> wd0 at pciide0 channel 1 drive 0: <ST3120025A>
> wd0: 16-sector PIO, LBA48, 114473MB, 234441648 sectors
> atapiscsi0 at pciide0 channel 1 drive 1
> scsibus0 at atapiscsi0: 2 targets
> cd0 at scsibus0 targ 0 lun 0: <GENERIC, DVD RW 12XMax, 100I> SCSI0 5/
> cdrom removable
> wd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 5
> cd0(pciide0:1:1): using PIO mode 4, Ultra-DMA mode 2
> ichiic0 at pci0 dev 31 function 3 "Intel 82801FB SMBus" rev 0x03:  
> irq 10
> iic0 at ichiic0
> adt0 at iic0 addr 0x2e: sch5017 rev 0x89
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3: Intel UHCI root hub, rev 1.00/1.00, addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4: Intel UHCI root hub, rev 1.00/1.00, addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> lpt0 at isa0 port 0x378/4 irq 7
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> biomask ff3d netmask ff7d ttymask ffff
> pctr: user-level cycle counter enabled
> mtrr: Pentium Pro MTRR support
> ichiic0: exec: op 1, addr 0x2e, cmdlen 1, len 1, flags 0x00:  
> timeout, status 0x40<INUSE>
> ichiic0: abort failed, status 0x42<INTR,INUSE>
> ichiic0: exec: op 1, addr 0x2e, cmdlen 1, len 1, flags 0x00:  
> timeout, status 0x0
> ichiic0: abort failed, status 0x42<INTR,INUSE>
> umass0 at uhub4 port 1 configuration 1 interface 0
> umass0: vendor 0x058f USB Reader, rev 1.10/1.00, addr 2
> umass0: using SCSI over Bulk-Only
> scsibus1 at umass0: 2 targets
> sd0 at scsibus1 targ 1 lun 0: <Generic, USB SD Reader, 1.00> SCSI0 0/
> direct removable
> sd0: drive offline
> sd1 at scsibus1 targ 1 lun 1: <Generic, USB CF Reader, 1.01> SCSI0 0/
> direct removable
> sd1: drive offline
> sd2 at scsibus1 targ 1 lun 2: <Generic, USB SM Reader, 1.02> SCSI0 0/
> direct removable
> sd2: drive offline
> sd3 at scsibus1 targ 1 lun 3: <Generic, USB MS Reader, 1.03> SCSI0 0/
> direct removable
> sd3: drive offline
> dkcsum: wd0 matches BIOS drive 0x80
> root on wd0a swap on wd0b dump on wd0b
>
>
> Tail of /var/log/messages (all file is filled of same messages)
>
> bash-3.2# tail -f /var/log/messages
> Nov 21 05:39:24 mail /bsd: ichiic0: exec: op 1, addr 0x2e, cmdlen 1,  
> len 1, flags 0x00: timeout, status 0x0
> Nov 21 05:39:24 mail /bsd: ichiic0: abort failed, status  
> 0x42<INTR,INUSE>
> Nov 21 05:39:25 mail /bsd: ichiic0: exec: op 1, addr 0x2e, cmdlen 1,  
> len 1, flags 0x00: timeout, status 0x0
> Nov 21 05:39:25 mail /bsd: ichiic0: abort failed, status  
> 0x42<INTR,INUSE>
> Nov 21 05:39:26 mail /bsd: ichiic0: exec: op 1, addr 0x2e, cmdlen 1,  
> len 1, flags 0x00: timeout, status 0x0
> Nov 21 05:39:26 mail /bsd: ichiic0: abort failed, status  
> 0x42<INTR,INUSE>
> Nov 21 05:39:27 mail /bsd: ichiic0: exec: op 1, addr 0x2e, cmdlen 1,  
> len 1, flags 0x00: timeout, status 0x0
> Nov 21 05:39:27 mail /bsd: ichiic0: abort failed, status  
> 0x42<INTR,INUSE>
> Nov 21 05:39:28 mail /bsd: ichiic0: exec: op 1, addr 0x2e, cmdlen 1,  
> len 1, flags 0x00: timeout, status 0x0
> Nov 21 05:39:28 mail /bsd: ichiic0: abort failed, status  
> 0x42<INTR,INUSE>
>
>
> Thanks!
>
> --
> Best regards,
> Evgeniy                          mailto:[hidden email]