TOSHIBA PORTEGE R600

classic Classic list List threaded Threaded
5 messages Options
Reply | Threaded
Open this post in threaded view
|

TOSHIBA PORTEGE R600

peter.ericson
Hi misc@I'm thinking of buying an R600 to run current on.Has anyone had any
experience with these machines?From the spec sheet:  Part Number
PPR61A-02200R <ES5.0>                                                CPU
Intel&reg; CoreTM2 Duo Processor ULV Su9400
(1.4GHz, 800mHz FSB, 3MB l2 cache)
mobile Intel&reg; GS45 Express Chipset
Video/Graphics            Intel&reg; Graphics media Accelerator GS45
Wireless Communications   Intel&reg; 802.11 a/g/n, BluetoothTM V2.1 + EDR,
Built-in 3G HSPA        BIOS                      ACPI, PnP, VESA, DPmS, DDC,
Sm BIOS, PCI, BIOS support               Audio                     Intel&reg;
High Definition Audio Sound                                   Wired
Communications      Intel&reg; 1GBit Tx Ethernet + Active management
Technology (AmT) 4.0  Thanks in advance,Peter Ericson

Reply | Threaded
Open this post in threaded view
|

Re: TOSHIBA PORTEGE R600

Nick Guenther
On Mon, Nov 23, 2009 at 6:51 PM,  <[hidden email]> wrote:
> Hi misc@I'm thinking of buying an R600 to run current on.Has anyone had any
> experience with these machines?From the spec sheet:  Part Number
> PPR61A-02200R <ES5.0>                                                CPU
> Intel&reg; CoreTM2 Duo Processor ULV Su9400
> (1.4GHz, 800mHz FSB, 3MB l2 cache)
> mobile Intel&reg; GS45 Express Chipset
> Video/Graphics            Intel&reg; Graphics media Accelerator GS45
> Wireless Communications   Intel&reg; 802.11 a/g/n, BluetoothTM V2.1 + EDR,
> Built-in 3G HSPA        BIOS                      ACPI, PnP, VESA, DPmS,
DDC,
> Sm BIOS, PCI, BIOS support               Audio                    
Intel&reg;
> High Definition Audio Sound                                   Wired
> Communications      Intel&reg; 1GBit Tx Ethernet + Active management
> Technology (AmT) 4.0  Thanks in advance,Peter Ericson
>
>


Funny you should ask. I have an R500 and it works fine, excepting the
lack of ACPI support of course. The Fn-Mute key combo even works right
away, no configuring needed (magic!). It's super flimsy though, I've
had it's optical drive repaired twice and the DC in has come loose and
I'm terrified of bumping the screen (it's 4mm thick). It's not the
worst laptop I've heard of as far as heat goes but it definitely gets
up there--I can't really do CPU intensive things on it since it'll get
up to 95degC and hover there really quick. Wifi is wpi(4) and except
for one firmware glitch once, and sometimes things lagging out (seems
to be correlated with heat) until I reset the card, I've never had any
problems. I'm not sure how different the R600 is, though.

This BIOS doesn't seem to like (legacy) GRUB: it hangs on the logo
screen unless I warm-boot or mash the F keys (very odd) but when I was
just using the OpenBSD MBR it never did that.

dmesg from 4.6-release:
OpenBSD 4.6 (GENERIC.MP) #89: Thu Jul  9 21:32:39 MDT 2009
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Intel(R) Core(TM)2 CPU U7600 @ 1.20GHz ("GenuineIntel" 686-class) 1.20
GHz
cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
real mem  = 1064202240 (1014MB)
avail mem = 1020198912 (972MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 10/30/07, BIOS32 rev. 0 @
0xfcb25, SMBIOS rev. 2.4 @ 0xec000 (40 entries)
bios0: vendor TOSHIBA version "Version 1.50" date 10/30/2007
bios0: TOSHIBA PORTEGE R500
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP SSDT BOOT APIC MCFG HPET TCPA SLIC SSDT SSDT
acpi0: wakeup devices USB1(S3) USB3(S3) USB4(S3) EHCI(S3) GLAN(S4)
WLAN(S4) LID_(S4) PWRB(S4) HS87(S4) HS86(S4)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 133MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Intel(R) Core(TM)2 CPU U7600 @ 1.20GHz ("GenuineIntel" 686-class) 1.20
GHz
cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR
ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 1
acpihpet0 at acpi0: 14318179 Hz
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 3 (PCIB)
acpiprt2 at acpi0: bus 1 (PEX1)
acpiprt3 at acpi0: bus 2 (MPEX)
acpicpu0 at acpi0: C3, C2, C1, PSS
acpicpu1 at acpi0: C3, C2, C1, PSS
acpipwrres0 at acpi0: PDOC
acpitz0 at acpi0: critical temperature 102 degC
acpibtn0 at acpi0: LID_
acpibat0 at acpi0: BAT1 model "G71C00086210" serial 0000000796 type
Li-ION   oem "0"
acpibtn1 at acpi0: PWRB
acpiac0 at acpi0: AC unit offline
acpidock0 at acpi0: DOCK not docked (0)
acpivideo0 at acpi0: VGA_
acpivout0 at acpivideo0: LCD_
acpivout1 at acpivideo0: CRT_
acpivout2 at acpivideo0: DVI_
bios0: ROM list: 0xc0000/0x10000 0xe0000/0x10000!
cpu0: Enhanced SpeedStep 1198 MHz: speeds: 1200, 800 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
intagp0 at vga1
agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
inteldrm0 at vga1: apic 1 int 16 (irq 10)
drm0 at inteldrm0
"Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
apic 1 int 22 (irq 255)
azalia0: codecs: Realtek ALC262
audio0 at azalia0
ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
pci1 at ppb0 bus 1
em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00:
apic 1 int 16 (irq 10), address 00:15:b7:43:a0:f2
ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
pci2 at ppb1 bus 2
wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
apic 1 int 18 (irq 11), MoW1, address 00:1c:bf:78:7f:04
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1
int 23 (irq 11)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1
int 19 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1
int 18 (irq 11)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1
int 16 (irq 10)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1
int 23 (irq 11)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
pci3 at ppb2 bus 3
cbb0 at pci3 dev 11 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1
int 21 (irq 255)
"TI PCIXX12 FireWire" rev 0x00 at pci3 dev 11 function 1 not configured
sdhc0 at pci3 dev 11 function 3 "TI PCIXX12 Secure Data" rev 0x00:
apic 1 int 23 (irq 255)
sdmmc0 at sdhc0
cardslot0 at cbb0 slot 0 flags 0
cardbus0 at cardslot0: bus 4 device 0 cacheline 0x8, lattimer 0x20
pcmcia0 at cardslot0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM disabled
ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: apic 1
int 19 (irq 11), AHCI 1.1
scsibus0 at ahci0: 32 targets
sd0 at scsibus0 targ 0 lun 0: <ATA, TOSHIBA MK1637GS, DL03> SCSI3 0/direct
fixed
sd0: 152627MB, 512 bytes/sec, 312581808 sec total
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
umass0 at uhub0 port 4 configuration 1 interface 0 "TOSHIBA Optical
Drive Controller" rev 2.00/0.00 addr 2
umass0: using ATAPI over Bulk-Only
scsibus1 at umass0: 2 targets, initiator 0
cd0 at scsibus1 targ 1 lun 0: <MATSHITA, DVD-RAM UJ-844S, 1.10> ATAPI
5/cdrom removable
ugen0 at uhub2 port 1 "AuthenTec Fingerprint Sensor" rev 1.10/c.10 addr 2
softraid0 at root
root on sd0a swap on sd0b dump on sd0b

-Nick

Reply | Threaded
Open this post in threaded view
|

Re: TOSHIBA PORTEGE R600

Nick Guenther
On Mon, Nov 23, 2009 at 9:42 PM, Nick Guenther <[hidden email]> wrote:
> On Mon, Nov 23, 2009 at 6:51 PM,  <[hidden email]> wrote:
>> Hi misc@I'm thinking of buying an R600 to run current on.Has anyone had
any
>> experience with these machines?From the spec sheet:  Part Number
>> PPR61A-02200R <ES5.0>                                                CPU
>> Intel&reg; CoreTM2 Duo Processor ULV Su9400
>> (1.4GHz, 800mHz FSB, 3MB l2 cache)
>> mobile Intel&reg; GS45 Express Chipset
>> Video/Graphics            Intel&reg; Graphics media Accelerator GS45
>> Wireless Communications   Intel&reg; 802.11 a/g/n, BluetoothTM V2.1 + EDR,
>> Built-in 3G HSPA        BIOS                      ACPI, PnP, VESA, DPmS,
DDC,
>> Sm BIOS, PCI, BIOS support               Audio                    
Intel&reg;

>> High Definition Audio Sound                                   Wired
>> Communications      Intel&reg; 1GBit Tx Ethernet + Active management
>> Technology (AmT) 4.0  Thanks in advance,Peter Ericson
>>
>>
>
>
> Funny you should ask. I have an R500 and it works fine, excepting the
> lack of ACPI support of course. The Fn-Mute key combo even works right
> away, no configuring needed (magic!). It's super flimsy though, I've
> had it's optical drive repaired twice and the DC in has come loose and
> I'm terrified of bumping the screen (it's 4mm thick). It's not the
> worst laptop I've heard of as far as heat goes but it definitely gets
> up there--I can't really do CPU intensive things on it since it'll get
> up to 95degC and hover there really quick. Wifi is wpi(4) and except
> for one firmware glitch once, and sometimes things lagging out (seems
> to be correlated with heat) until I reset the card, I've never had any
> problems. I'm not sure how different the R600 is, though.
>
> This BIOS doesn't seem to like (legacy) GRUB: it hangs on the logo
> screen unless I warm-boot or mash the F keys (very odd) but when I was
> just using the OpenBSD MBR it never did that.
>
> dmesg from 4.6-release:
> OpenBSD 4.6 (GENERIC.MP) #89: Thu Jul  9 21:32:39 MDT 2009
>    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
> cpu0: Intel(R) Core(TM)2 CPU U7600 @ 1.20GHz ("GenuineIntel" 686-class) 1.20
GHz
> cpu0:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR

> real mem  = 1064202240 (1014MB)
> avail mem = 1020198912 (972MB)
> mainbus0 at root
> bios0 at mainbus0: AT/286+ BIOS, date 10/30/07, BIOS32 rev. 0 @
> 0xfcb25, SMBIOS rev. 2.4 @ 0xec000 (40 entries)
> bios0: vendor TOSHIBA version "Version 1.50" date 10/30/2007
> bios0: TOSHIBA PORTEGE R500
> acpi0 at bios0: rev 0
> acpi0: tables DSDT FACP SSDT BOOT APIC MCFG HPET TCPA SLIC SSDT SSDT
> acpi0: wakeup devices USB1(S3) USB3(S3) USB4(S3) EHCI(S3) GLAN(S4)
> WLAN(S4) LID_(S4) PWRB(S4) HS87(S4) HS86(S4)
> acpitimer0 at acpi0: 3579545 Hz, 24 bits
> acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> cpu0 at mainbus0: apid 0 (boot processor)
> cpu0: apic clock running at 133MHz
> cpu1 at mainbus0: apid 1 (application processor)
> cpu1: Intel(R) Core(TM)2 CPU U7600 @ 1.20GHz ("GenuineIntel" 686-class) 1.20
GHz
> cpu1:
FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUS
H,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,DS-CPL,VMX,EST,TM2,CX16,
xTPR

> ioapic0 at mainbus0: apid 1 pa 0xfec00000, version 20, 24 pins
> ioapic0: misconfigured as apic 0, remapped to apid 1
> acpihpet0 at acpi0: 14318179 Hz
> acpiprt0 at acpi0: bus 0 (PCI0)
> acpiprt1 at acpi0: bus 3 (PCIB)
> acpiprt2 at acpi0: bus 1 (PEX1)
> acpiprt3 at acpi0: bus 2 (MPEX)
> acpicpu0 at acpi0: C3, C2, C1, PSS
> acpicpu1 at acpi0: C3, C2, C1, PSS
> acpipwrres0 at acpi0: PDOC
> acpitz0 at acpi0: critical temperature 102 degC
> acpibtn0 at acpi0: LID_
> acpibat0 at acpi0: BAT1 model "G71C00086210" serial 0000000796 type
> Li-ION   oem "0"
> acpibtn1 at acpi0: PWRB
> acpiac0 at acpi0: AC unit offline
> acpidock0 at acpi0: DOCK not docked (0)
> acpivideo0 at acpi0: VGA_
> acpivout0 at acpivideo0: LCD_
> acpivout1 at acpivideo0: CRT_
> acpivout2 at acpivideo0: DVI_
> bios0: ROM list: 0xc0000/0x10000 0xe0000/0x10000!
> cpu0: Enhanced SpeedStep 1198 MHz: speeds: 1200, 800 MHz
> pci0 at mainbus0 bus 0: configuration mode 1 (bios)
> pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
> vga1 at pci0 dev 2 function 0 "Intel 82945GM Video" rev 0x03
> wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
> wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
> intagp0 at vga1
> agp0 at intagp0: aperture at 0xe0000000, size 0x10000000
> inteldrm0 at vga1: apic 1 int 16 (irq 10)
> drm0 at inteldrm0
> "Intel 82945GM Video" rev 0x03 at pci0 dev 2 function 1 not configured
> azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x02:
> apic 1 int 22 (irq 255)
> azalia0: codecs: Realtek ALC262
> audio0 at azalia0
> ppb0 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x02
> pci1 at ppb0 bus 1
> em0 at pci1 dev 0 function 0 "Intel PRO/1000MT (82573L)" rev 0x00:
> apic 1 int 16 (irq 10), address 00:15:b7:43:a0:f2
> ppb1 at pci0 dev 28 function 2 "Intel 82801GB PCIE" rev 0x02
> pci2 at ppb1 bus 2
> wpi0 at pci2 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02:
> apic 1 int 18 (irq 11), MoW1, address 00:1c:bf:78:7f:04
> uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x02: apic 1
> int 23 (irq 11)
> uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x02: apic 1
> int 19 (irq 11)
> uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x02: apic 1
> int 18 (irq 11)
> uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x02: apic 1
> int 16 (irq 10)
> ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x02: apic 1
> int 23 (irq 11)
> usb0 at ehci0: USB revision 2.0
> uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
> ppb2 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe2
> pci3 at ppb2 bus 3
> cbb0 at pci3 dev 11 function 0 "TI PCIXX12 CardBus" rev 0x00: apic 1
> int 21 (irq 255)
> "TI PCIXX12 FireWire" rev 0x00 at pci3 dev 11 function 1 not configured
> sdhc0 at pci3 dev 11 function 3 "TI PCIXX12 Secure Data" rev 0x00:
> apic 1 int 23 (irq 255)
> sdmmc0 at sdhc0
> cardslot0 at cbb0 slot 0 flags 0
> cardbus0 at cardslot0: bus 4 device 0 cacheline 0x8, lattimer 0x20
> pcmcia0 at cardslot0
> ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x02: PM
disabled
> ahci0 at pci0 dev 31 function 2 "Intel 82801GBM AHCI" rev 0x02: apic 1
> int 19 (irq 11), AHCI 1.1
> scsibus0 at ahci0: 32 targets
> sd0 at scsibus0 targ 0 lun 0: <ATA, TOSHIBA MK1637GS, DL03> SCSI3 0/direct
fixed

> sd0: 152627MB, 512 bytes/sec, 312581808 sec total
> usb1 at uhci0: USB revision 1.0
> uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb2 at uhci1: USB revision 1.0
> uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb3 at uhci2: USB revision 1.0
> uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> usb4 at uhci3: USB revision 1.0
> uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
> isa0 at ichpcib0
> isadma0 at isa0
> pckbc0 at isa0 port 0x60/5
> pckbd0 at pckbc0 (kbd slot)
> pckbc0: using irq 1 for kbd slot
> wskbd0 at pckbd0: console keyboard, using wsdisplay0
> pms0 at pckbc0 (aux slot)
> pckbc0: using irq 12 for aux slot
> wsmouse0 at pms0 mux 0
> pcppi0 at isa0 port 0x61
> midi0 at pcppi0: <PC speaker>
> spkr0 at pcppi0
> npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
> mtrr: Pentium Pro MTRR support
> umass0 at uhub0 port 4 configuration 1 interface 0 "TOSHIBA Optical
> Drive Controller" rev 2.00/0.00 addr 2
> umass0: using ATAPI over Bulk-Only
> scsibus1 at umass0: 2 targets, initiator 0
> cd0 at scsibus1 targ 1 lun 0: <MATSHITA, DVD-RAM UJ-844S, 1.10> ATAPI
> 5/cdrom removable
> ugen0 at uhub2 port 1 "AuthenTec Fingerprint Sensor" rev 1.10/c.10 addr 2
> softraid0 at root
> root on sd0a swap on sd0b dump on sd0b
>
> -Nick
>

Oh and thought you might want these:

record.adc_mute=off
record.adc=120,120
record.adc2_mute=off
record.adc2=120,120
record.adc3_mute=off
record.adc3=120,120
inputs.mix_source=mic,beep,hp
inputs.mix_mic=120,120
inputs.mix_mic2=120,120
inputs.mix_beep=120,120
inputs.mix_hp=120,120
outputs.mix2=16,16
inputs.mix2_source=dac2,mix
outputs.mix3=16,16
inputs.mix3_source=dac,mix
outputs.spkr_source=mix2
outputs.spkr_mute=off
outputs.spkr_dir=output
outputs.spkr_boost=off
outputs.hp_source=mix3
outputs.hp_mute=off
inputs.hp=85,85
outputs.hp_dir=output
outputs.hp_boost=off
outputs.mic_source=mix2
outputs.mic_mute=off
inputs.mic=85,85
outputs.mic_dir=input-vr80
outputs.mic_boost=off
inputs.mic2=85,85
outputs.mic2_dir=input-vr80
record.adc3_source=mic,mic2,beep,hp,mix
record.adc2_source=mic,mic2,beep,hp,mix
record.adc_source=mic,mic2,beep,hp,mix
outputs.hp_sense=unplugged
outputs.mic_sense=unplugged
outputs.spkr_muters=hp,mic
outputs.master=16,16
outputs.master.mute=off
outputs.master.slaves=mix2,mix3,spkr,hp
record.volume=120,120
record.volume.mute=off
record.volume.slaves=adc,adc2,adc3



name=HD-Audio
version=1.0
config=azalia0
encodings=slinear_le:16,slinear_le:20,slinear_le:24
properties=full_duplex,independent
full_duplex=0
fullduplex=0
blocksize=9600
hiwat=6
lowat=4
output_muted=0
monitor_gain=0
mode=
play.rate=48000
play.channels=2
play.precision=16
play.encoding=slinear_le
play.gain=16
play.balance=32
play.port=0x0
play.avail_ports=0x0
play.seek=0
play.samples=0
play.eof=0
play.pause=0
play.error=0
play.waiting=0
play.open=0
play.active=0
play.buffer_size=65536
play.block_size=9600
play.errors=0
record.rate=48000
record.channels=2
record.precision=16
record.encoding=slinear_le
record.gain=120
record.balance=32
record.port=0x0
record.avail_ports=0x0
record.seek=0
record.samples=0
record.eof=0
record.pause=0
record.error=0
record.waiting=0
record.open=0
record.active=0
record.buffer_size=65536
record.block_size=9600
record.errors=0


$ glxgears -info
Failed to initialize GEM.  Falling back to classic.
Running synchronized to the vertical refresh.  The framerate should be
approximately the same as the monitor refresh rate.
GL_RENDERER   = Mesa DRI Intel(R) 945GM 20090418 2009Q1 x86/MMX/SSE2
GL_VERSION    = 1.4 Mesa 7.4.1
GL_VENDOR     = Tungsten Graphics, Inc
GL_EXTENSIONS = GL_ARB_depth_texture GL_ARB_fragment_program
GL_ARB_multisample GL_ARB_multitexture GL_ARB_point_parameters
GL_ARB_shadow GL_ARB_texture_border_clamp GL_ARB_texture_compression
GL_ARB_texture_cube_map GL_ARB_texture_env_add
GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar
GL_ARB_texture_env_dot3 GL_ARB_texture_mirrored_repeat
GL_ARB_texture_non_power_of_two GL_ARB_texture_rectangle
GL_ARB_transpose_matrix GL_ARB_vertex_buffer_object
GL_ARB_vertex_program GL_ARB_window_pos GL_EXT_abgr GL_EXT_bgra
GL_EXT_blend_color GL_EXT_blend_equation_separate
GL_EXT_blend_func_separate GL_EXT_blend_logic_op GL_EXT_blend_minmax
GL_EXT_blend_subtract GL_EXT_clip_volume_hint GL_EXT_cull_vertex
GL_EXT_compiled_vertex_array GL_EXT_copy_texture
GL_EXT_draw_range_elements GL_EXT_fog_coord GL_EXT_multi_draw_arrays
GL_EXT_packed_depth_stencil GL_EXT_packed_pixels
GL_EXT_point_parameters GL_EXT_polygon_offset GL_EXT_rescale_normal
GL_EXT_secondary_color GL_EXT_separate_specular_color
GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_EXT_subtexture
GL_EXT_texture GL_EXT_texture3D GL_EXT_texture_edge_clamp
GL_EXT_texture_env_add GL_EXT_texture_env_combine
GL_EXT_texture_env_dot3 GL_EXT_texture_filter_anisotropic
GL_EXT_texture_lod_bias GL_EXT_texture_object GL_EXT_texture_rectangle
GL_EXT_vertex_array GL_3DFX_texture_compression_FXT1
GL_APPLE_client_storage GL_APPLE_packed_pixels
GL_ATI_blend_equation_separate GL_ATI_texture_env_combine3
GL_IBM_rasterpos_clip GL_IBM_texture_mirrored_repeat
GL_INGR_blend_func_separate GL_MESA_pack_invert GL_MESA_ycbcr_texture
GL_MESA_window_pos GL_NV_blend_square GL_NV_light_max_exponent
GL_NV_point_sprite GL_NV_texture_rectangle GL_NV_texgen_reflection
GL_NV_vertex_program GL_NV_vertex_program1_1 GL_OES_read_format
GL_SGIS_generate_mipmap GL_SGIS_texture_border_clamp
GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_SGIX_depth_texture
GL_SUN_multi_draw_arrays


And more about it's heat problems: I can't run a GL screensaver
because the screensaver will make the fan speed up. I don't know about
you but I'm used to thinking of screensaver mode as "it's safe, I can
stop paying attention to it".

-Nick

Reply | Threaded
Open this post in threaded view
|

Re: TOSHIBA PORTEGE R600

peter.ericson
In reply to this post by Nick Guenther
On Mon, Nov 23, 2009 at 09:42:49PM -0500, Nick Guenther wrote:

> Funny you should ask. I have an R500 and it works fine, excepting the
> lack of ACPI support of course. The Fn-Mute key combo even works right
> away, no configuring needed (magic!). It's super flimsy though, I've
> had it's optical drive repaired twice and the DC in has come loose and
> I'm terrified of bumping the screen (it's 4mm thick). It's not the
> worst laptop I've heard of as far as heat goes but it definitely gets
> up there--I can't really do CPU intensive things on it since it'll get
> up to 95degC and hover there really quick. Wifi is wpi(4) and except
> for one firmware glitch once, and sometimes things lagging out (seems
> to be correlated with heat) until I reset the card, I've never had any
> problems. I'm not sure how different the R600 is, though.

Hi Nick,

Thanks for the detailed reply, very helpful.

A work colleague used to fix these machines, he mentioned that you
might want to upgrade the bios to 1.6 which adds ACPI support, also
pre 1.6 the optical drive wouldn't park during emergency shutdowns
which might explain why you have had to repair yours.

Anyway thanks again, I'll probably go ahead and order the R600.  Maybe
I leave the cpu throttled if it gets too hot...

Regards,

Peter

Reply | Threaded
Open this post in threaded view
|

Re: TOSHIBA PORTEGE R600

Nick Guenther
On Tue, Nov 24, 2009 at 6:02 AM, Peter Ericson
<[hidden email]> wrote:

> On Mon, Nov 23, 2009 at 09:42:49PM -0500, Nick Guenther wrote:
>> Funny you should ask. I have an R500 and it works fine, excepting the
>> lack of ACPI support of course. The Fn-Mute key combo even works right
>> away, no configuring needed (magic!). It's super flimsy though, I've
>> had it's optical drive repaired twice and the DC in has come loose and
>> I'm terrified of bumping the screen (it's 4mm thick). It's not the
>> worst laptop I've heard of as far as heat goes but it definitely gets
>> up there--I can't really do CPU intensive things on it since it'll get
>> up to 95degC and hover there really quick. Wifi is wpi(4) and except
>> for one firmware glitch once, and sometimes things lagging out (seems
>> to be correlated with heat) until I reset the card, I've never had any
>> problems. I'm not sure how different the R600 is, though.
>
> Hi Nick,
>
> Thanks for the detailed reply, very helpful.
>
> A work colleague used to fix these machines, he mentioned that you
> might want to upgrade the bios to 1.6 which adds ACPI support, also
> pre 1.6 the optical drive wouldn't park during emergency shutdowns
> which might explain why you have had to repair yours.
>
> Anyway thanks again, I'll probably go ahead and order the R600.  Maybe
> I leave the cpu throttled if it gets too hot...
>


Oh really? I downloaded the update but it's a Windows app and I read
somewhere that all it did was support SSDs better (but I can't find
that post now so it's hearsay), so I haven't taken the time to hack up
a way to get it installed. And it's not like ACPI isn't there, just
that OpenBSD doesn't support it fully. But if the update might help
I'll definitely try it. Does you colleague has a tip on how to do it
without Windows?

-Nick