Some small issues with Dell Inspiron 9400 laptop

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

Some small issues with Dell Inspiron 9400 laptop

Jan-90
Because bugs@ is only for developers, using gnats or sendbug for posting bugs, I will post my (small) issues here.

Using Dell Inspiron 9400 laptop with latest snapshot (7/2/8), I have the following issues (also with older snaps);

- Disabled softraid in kernel ('disable softraid'), still mentioned for root in dmesg:
<cut>
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Netac, OnlyDisk, 4.12> SCSI2 0/direct removable
sd0: 125MB, 16 cyl, 255 head, 63 sec, 512 bytes/sec, 257984 sec total
softraid0 at root
root on wd0a swap on wd0b dump on wd0b
<cut>

- When lowering volume with aumix, the woofer in the laptop is not lowered in volume the same amount as the other speakers

- Processor T2600 is not fully recognised (unknown Enhanced Speedstep CPU in dmesg):
<cut>
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU T2600 @ 2.16GHz ("GenuineIntel" 686-class) 2.17 GHz
cpu1:
<cut>
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130d2c06000d2c
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2167 MHz (1404 mV): speeds: 2167, 1000 MHz
<cut>

Hope this helps with further development.

Jan

Reply | Threaded
Open this post in threaded view
|

Re: Some small issues with Dell Inspiron 9400 laptop

Jan-90
In addition here my full dmesg:

OpenBSD 4.2-current (GENERIC.MP) #551: Thu Feb  7 12:22:07 MST 2008
    [hidden email]:/usr/src/sys/arch/i386/compile/GENERIC.MP
cpu0: Genuine Intel(R) CPU T2600 @ 2.16GHz ("GenuineIntel" 686-class) 2.17 GHz
cpu0: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
real mem  = 1072078848 (1022MB)
avail mem = 1028685824 (981MB)
mainbus0 at root
bios0 at mainbus0: AT/286+ BIOS, date 06/27/07, BIOS32 rev. 0 @ 0xffa10, SMBIOS rev. 2.4 @ 0xf7950 (44 entries)
bios0: vendor Dell Inc. version "A09" date 06/27/2007
bios0: Dell Inc. MP061
acpi0 at bios0: rev 0
acpi0: tables DSDT FACP HPET APIC MCFG SLIC BOOT SSDT
acpi0: wakeup devices LID_(S3) PBTN(S4) MBTN(S5) PCI0(S3) USB0(S0) USB1(S0) USB2(S0) USB3(S0) EHCI(S0) AZAL(S3) PCIE(S4) RP01(S3) RP02(S4) RP03(S3) RP04(S3) RP05(S3) RP06(S3)
acpitimer0 at acpi0: 3579545 Hz, 24 bits
acpihpet0 at acpi0: 14318179 Hz
acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
cpu0 at mainbus0: apid 0 (boot processor)
cpu0: apic clock running at 166MHz
cpu1 at mainbus0: apid 1 (application processor)
cpu1: Genuine Intel(R) CPU T2600 @ 2.16GHz ("GenuineIntel" 686-class) 2.17 GHz
cpu1: FPU,V86,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,CFLUSH,DS,ACPI,MMX,FXSR,SSE,SSE2,SS,HTT,TM,SBF,SSE3,MWAIT,VMX,EST,TM2,xTPR
ioapic0 at mainbus0: apid 2 pa 0xfec00000, version 20, 24 pins
ioapic0: misconfigured as apic 0, remapped to apid 2
acpiprt0 at acpi0: bus 0 (PCI0)
acpiprt1 at acpi0: bus 1 (AGP_)
acpiprt2 at acpi0: bus 3 (PCIE)
acpiprt3 at acpi0: bus 11 (RP01)
acpiprt4 at acpi0: bus 12 (RP02)
acpiprt5 at acpi0: bus -1 (RP03)
acpiprt6 at acpi0: bus 13 (RP04)
acpiprt7 at acpi0: bus -1 (RP05)
acpiprt8 at acpi0: bus -1 (RP06)
acpicpu0 at acpi0: C3
acpicpu1 at acpi0: C3
acpitz0 at acpi0: critical temperature 126 degC
acpiac0 at acpi0: AC unit online
acpibat0 at acpi0: BAT0 model "DELL C54476" serial 986 type LION oem "Sanyo"
acpibtn0 at acpi0: LID_
acpibtn1 at acpi0: PBTN
acpibtn2 at acpi0: SBTN
bios0: ROM list: 0xc0000/0xe800 0xce800/0x1800
cpu0: unknown Enhanced SpeedStep CPU, msr 0x06130d2c06000d2c
cpu0: using only highest and lowest power states
cpu0: Enhanced SpeedStep 2167 MHz (1404 mV): speeds: 2167, 1000 MHz
pci0 at mainbus0 bus 0: configuration mode 1 (no bios)
pchb0 at pci0 dev 0 function 0 "Intel 82945GM Host" rev 0x03
agp0 at pchb0: no integrated graphics
ppb0 at pci0 dev 1 function 0 "Intel 82945GM PCIE" rev 0x03: apic 2 int 16 (irq 0)
pci1 at ppb0 bus 1
vga1 at pci1 dev 0 function 0 vendor "NVIDIA", unknown product 0x0298 rev 0xa1
wsdisplay0 at vga1 mux 1: console (80x25, vt100 emulation)
wsdisplay0: screen 1-5 added (80x25, vt100 emulation)
azalia0 at pci0 dev 27 function 0 "Intel 82801GB HD Audio" rev 0x01: apic 2 int 21 (irq 11)
azalia0: codec[s]: Sigmatel STAC9200
audio0 at azalia0
ppb1 at pci0 dev 28 function 0 "Intel 82801GB PCIE" rev 0x01: apic 2 int 16 (irq 0)
pci2 at ppb1 bus 11
ppb2 at pci0 dev 28 function 1 "Intel 82801GB PCIE" rev 0x01: apic 2 int 17 (irq 0)
pci3 at ppb2 bus 12
wpi0 at pci3 dev 0 function 0 "Intel PRO/Wireless 3945ABG" rev 0x02: apic 2 int 17 (irq 5), MoW2, address 00:13:02:88:a2:ea
ppb3 at pci0 dev 28 function 3 "Intel 82801GB PCIE" rev 0x01: apic 2 int 19 (irq 0)
pci4 at ppb3 bus 13
uhci0 at pci0 dev 29 function 0 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 10)
uhci1 at pci0 dev 29 function 1 "Intel 82801GB USB" rev 0x01: apic 2 int 21 (irq 11)
uhci2 at pci0 dev 29 function 2 "Intel 82801GB USB" rev 0x01: apic 2 int 22 (irq 9)
uhci3 at pci0 dev 29 function 3 "Intel 82801GB USB" rev 0x01: apic 2 int 23 (irq 7)
ehci0 at pci0 dev 29 function 7 "Intel 82801GB USB" rev 0x01: apic 2 int 20 (irq 10)
usb0 at ehci0: USB revision 2.0
uhub0 at usb0 "Intel EHCI root hub" rev 2.00/1.00 addr 1
ppb4 at pci0 dev 30 function 0 "Intel 82801BAM Hub-to-PCI" rev 0xe1
pci5 at ppb4 bus 3
bce0 at pci5 dev 0 function 0 "Broadcom BCM4401B1" rev 0x02: apic 2 int 17 (irq 5), address 00:14:22:f8:c1:eb
bmtphy0 at bce0 phy 1: BCM4401 10/100baseTX PHY, rev. 0
ichpcib0 at pci0 dev 31 function 0 "Intel 82801GBM LPC" rev 0x01: PM disabled
pciide0 at pci0 dev 31 function 2 "Intel 82801GBM SATA" rev 0x01: DMA, channel 0 wired to compatibility, channel 1 wired to compatibility
wd0 at pciide0 channel 0 drive 0: <Hitachi HTS721010G9SA00>
wd0: 16-sector PIO, LBA48, 93958MB, 192426570 sectors
wd0(pciide0:0:0): using PIO mode 4, Ultra-DMA mode 5
atapiscsi0 at pciide0 channel 1 drive 0
scsibus0 at atapiscsi0: 2 targets
cd0 at scsibus0 targ 0 lun 0: <PHILIPS, DVD+-RW SDVD8820, AD15> SCSI0 5/cdrom removable
cd0(pciide0:1:0): using PIO mode 4, Ultra-DMA mode 2
ichiic0 at pci0 dev 31 function 3 "Intel 82801GB SMBus" rev 0x01: apic 2 int 17 (irq 5)
iic0 at ichiic0
spdmem0 at iic0 addr 0x50: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
spdmem1 at iic0 addr 0x52: 512MB DDR2 SDRAM non-parity PC2-5300CL5 SO-DIMM
usb1 at uhci0: USB revision 1.0
uhub1 at usb1 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb2 at uhci1: USB revision 1.0
uhub2 at usb2 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb3 at uhci2: USB revision 1.0
uhub3 at usb3 "Intel UHCI root hub" rev 1.00/1.00 addr 1
usb4 at uhci3: USB revision 1.0
uhub4 at usb4 "Intel UHCI root hub" rev 1.00/1.00 addr 1
isa0 at ichpcib0
isadma0 at isa0
pckbc0 at isa0 port 0x60/5
pckbd0 at pckbc0 (kbd slot)
pckbc0: using irq 1 for kbd slot
wskbd0 at pckbd0: console keyboard, using wsdisplay0
pms0 at pckbc0 (aux slot)
pckbc0: using irq 12 for aux slot
wsmouse0 at pms0 mux 0
pcppi0 at isa0 port 0x61
midi0 at pcppi0: <PC speaker>
spkr0 at pcppi0
npx0 at isa0 port 0xf0/16: reported by CPUID; using exception 16
mtrr: Pentium Pro MTRR support
uhub5 at uhub0 port 1 "Dell product 0xa005" rev 2.00/50.18 addr 2
uhidev0 at uhub2 port 2 configuration 1 interface 0 "Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)" rev 1.10/3.00 addr 2
uhidev0: iclass 3/1
ums0 at uhidev0: 3 buttons and Z dir.
wsmouse1 at ums0 mux 0
umass0 at uhub3 port 1 configuration 1 interface 0 "Netac OnlyDisk" rev 1.10/2.00 addr 2
umass0: using SCSI over Bulk-Only
scsibus1 at umass0: 2 targets
sd0 at scsibus1 targ 1 lun 0: <Netac, OnlyDisk, 4.12> SCSI2 0/direct removable
sd0: 125MB, 16 cyl, 255 head, 63 sec, 512 bytes/sec, 257984 sec total
softraid0 at root
root on wd0a swap on wd0b dump on wd0b