Saludos

classic Classic list List threaded Threaded
1 message Options
Reply | Threaded
Open this post in threaded view
|

Saludos

Carlos A. Garcia G.
Bueno sigo con problemas de balanceo si tengo dos conexiones y hago NAT con digamos E1 salgo perfectamete a internet
nat on $ext_if from  $prv_net to any -> $ext_ifadd
si utilizo la conexion ASDL deberia de salir a internet tambien
nat on $ext_ifDSL from $prv_net to any-> $extaddDSL
solo que en lugar de salir pof ADSL salgo por E1 a pesar que hago NAT sobre la otra interface y apesar de que hago ping hacia ADSL esto funciona si le cambio
la dafault gw de E1 a ADSL ??? necesito algo de guia les paso mi tabla de ruteo tal como esta en este momento mas la ifconfig
 
Internet:
Destination                           Gateway            Flags     Refs     Use    Mtu  Interface
default                               148.233.81.1         UGS          9    60764      -      xl0
loopback                            localhost              UGRS        0        0     33224  lo0
localhost                            localhost              UH           11    11662  33224  lo0
148.233.81/24                     link#1                  UC            2        0      -         xl0
148.233.81.1                       0:2:17:24:18:38    UHLc        1        0      -         xl0
core                                   0:50:4:77:9b:a8    UHLc         0       94     -         lo0
172.16/16                           link#3                  UC            0        0      -         vr0
192.168.9/24                      link#2                  UC            1        0      -          mtd0
192.168.9.9                        0:20:ea:f9:61:45   UHLc         0      261    -          mtd0
BASE-ADDRESS.MCAST   localhost             URS           0        0     33224  lo0
-----------
lo0: flags=8049<UP,LOOPBACK,RUNNING,MULTICAST> mtu 33224
        inet6 ::1 prefixlen 128
        inet6 fe80::1%lo0 prefixlen 64 scopeid 0x7
        inet 127.0.0.1 netmask 0xff000000
xl0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: 00:50:04:77:9b:a8
        media: Ethernet autoselect (100baseTX full-duplex)
        status: active
        inet6 fe80::250:4ff:fe77:9ba8%xl0 prefixlen 64 scopeid 0x1
        inet 148.233.81.2 netmask 0xffffff00 broadcast 148.233.81.255
mtd0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: 00:02:2a:ef:f8:77
        media: Ethernet autoselect (100baseTX full-duplex)
        status: active
        inet6 fe80::202:2aff:feef:f877%mtd0 prefixlen 64 scopeid 0x2
        inet 192.168.9.21 netmask 0xffffff00 broadcast 192.168.9.255
vr0: flags=8843<UP,BROADCAST,RUNNING,SIMPLEX,MULTICAST> mtu 1500
        address: 00:30:18:69:41:1e
        media: Ethernet autoselect (none)
        status: no carrier
        inet6 fe80::230:18ff:fe69:411e%vr0 prefixlen 64 scopeid 0x3
        inet 172.16.0.1 netmask 0xffff0000 broadcast 172.16.255.255
pflog0: flags=141<UP,RUNNING,PROMISC> mtu 33224
pfsync0: flags=0<> mtu 2020
enc0: flags=0<> mtu 1536
 
Carlos A. Garcia G.
Netpoint-Cabonet Networks
Sistemas Operativos del Cabo
(624) 1430120 ext 19