[SOLVED] Re: apu2 em0/dhclient problems

classic Classic list List threaded Threaded
2 messages Options
Reply | Threaded
Open this post in threaded view
|

[SOLVED] Re: apu2 em0/dhclient problems

Edgar Pettijohn III-2
On Tue, Jan 29, 2019 at 12:03:23PM -0600, Edgar Pettijohn wrote:

>
> On Jan 29, 2019 11:01 AM, Marcus MERIGHI <[hidden email]> wrote:
> >
> > Hello,
> >
> > [hidden email] (Edgar Pettijohn), 2019.01.27 (Sun) 18:44 (CET):
> > > I'm trying to replace my dieing soekris box with an apu2 dmesg below.
> > > However, I can't seem to get em0 to connect to my isp. It will work
> > > when connecting to the soekris box though. So I don't think its the
> > > interface that is the problem. But everything I try seems to rule out
> > > eachother as the problem, leaving me in a viscious cycle.
> >
> > have you tried any of the other ethernet ports with your uplink?
> >
>
> I haven't. I did consider it, but then em0 worked when connecting to my router so I didn't. I guess it can't hurt to try anyway.
>
> Thanks,
>
> Edgar
> > Give it a go, I've had a similiar failure with em0 on apu2, running
> > with em1 for the uplink since then without problems.
> >
> > Marcus

Don't know why it works, but em1 works. I guess I'll rewrite my config files.

Thanks,

Edgar

> >
> > > I'm going to try disabling pf and after that current. If you have
> > > any other suggestions please send them.
> > >
> > > Thanks,
> > >
> > > edgar
> > >
> > > OpenBSD 6.4 (GENERIC.MP) #364: Thu Oct 11 13:30:23 MDT 2018
> > >     [hidden email]:/usr/src/sys/arch/amd64/compile/GENERIC.MP
> > > real mem = 1996152832 (1903MB)
> > > avail mem = 1926434816 (1837MB)
> > > mpath0 at root
> > > scsibus0 at mpath0: 256 targets
> > > mainbus0 at root
> > > bios0 at mainbus0: SMBIOS rev. 2.7 @ 0x77fb7020 (7 entries)
> > > bios0: vendor coreboot version "4.0.7" date 02/28/2017
> > > bios0: PC Engines APU2
> > > acpi0 at bios0: rev 2
> > > acpi0: sleep states S0 S1 S2 S3 S4 S5
> > > acpi0: tables DSDT FACP SSDT APIC HEST SSDT SSDT HPET
> > > acpi0: wakeup devices PWRB(S4) PBR4(S4) PBR5(S4) PBR6(S4) PBR7(S4) PBR8(S4) UOH1(S3) UOH3(S3) UOH5(S3) XHC0(S4)
> > > acpitimer0 at acpi0: 3579545 Hz, 32 bits
> > > acpimadt0 at acpi0 addr 0xfee00000: PC-AT compat
> > > cpu0 at mainbus0: apid 0 (boot processor)
> > > cpu0: AMD GX-412TC SOC, 998.27 MHz, 16-30-01
> > > cpu0: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> > > cpu0: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
> > > cpu0: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> > > cpu0: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> > > cpu0: smt 0, core 0, package 0
> > > mtrr: Pentium Pro MTRR support, 8 var ranges, 88 fixed ranges
> > > cpu0: apic clock running at 99MHz
> > > cpu0: mwait min=64, max=64, IBE
> > > cpu1 at mainbus0: apid 1 (application processor)
> > > cpu1: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
> > > cpu1: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> > > cpu1: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
> > > cpu1: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> > > cpu1: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> > > cpu1: smt 0, core 1, package 0
> > > cpu2 at mainbus0: apid 2 (application processor)
> > > cpu2: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
> > > cpu2: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> > > cpu2: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
> > > cpu2: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> > > cpu2: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> > > cpu2: smt 0, core 2, package 0
> > > cpu3 at mainbus0: apid 3 (application processor)
> > > cpu3: AMD GX-412TC SOC, 998.13 MHz, 16-30-01
> > > cpu3: FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,APIC,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,CFLUSH,MMX,FXSR,SSE,SSE2,HTT,SSE3,PCLMUL,MWAIT,SSSE3,CX16,SSE4.1,SSE4.2,MOVBE,POPCNT,AES,XSAVE,AVX,F16C,NXE,MMXX,FFXSR,PAGE1GB,RDTSCP,LONG,LAHF,CMPLEG,SVM,EAPICSP,AMCR8,ABM,SSE4A,MASSE,3DNOWP,OSVW,IBS,SKINIT,TOPEXT,DBKP,PERFTSC,PCTRL3,ITSC,BMI1,XSAVEOPT
> > > cpu3: 32KB 64b/line 2-way I-cache, 32KB 64b/line 8-way D-cache, 2MB 64b/line 16-way L2 cache
> > > cpu3: ITLB 32 4KB entries fully associative, 8 4MB entries fully associative
> > > cpu3: DTLB 40 4KB entries fully associative, 8 4MB entries fully associative
> > > cpu3: smt 0, core 3, package 0
> > > ioapic0 at mainbus0: apid 4 pa 0xfec00000, version 21, 24 pins
> > > ioapic1 at mainbus0: apid 5 pa 0xfec20000, version 21, 32 pins, remapped
> > > acpihpet0 at acpi0: 14318180 Hz
> > > acpiprt0 at acpi0: bus 0 (PCI0)
> > > acpiprt1 at acpi0: bus -1 (PBR4)
> > > acpiprt2 at acpi0: bus 1 (PBR5)
> > > acpiprt3 at acpi0: bus 2 (PBR6)
> > > acpiprt4 at acpi0: bus 3 (PBR7)
> > > acpiprt5 at acpi0: bus 4 (PBR8)
> > > acpicpu0 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> > > acpicpu1 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> > > acpicpu2 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> > > acpicpu3 at acpi0: C2(0@400 io@0x1771), C1(@1 halt!), PSS
> > > acpibtn0 at acpi0: PWRB
> > > acpicmos0 at acpi0
> > > cpu0: 998 MHz: speeds: 1000 800 600 MHz
> > > pci0 at mainbus0 bus 0
> > > pchb0 at pci0 dev 0 function 0 "AMD AMD64 16h Root Complex" rev 0x00
> > > pchb1 at pci0 dev 2 function 0 "AMD AMD64 16h Host" rev 0x00
> > > ppb0 at pci0 dev 2 function 2 "AMD AMD64 16h PCIE" rev 0x00: msi
> > > pci1 at ppb0 bus 1
> > > em0 at pci1 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:0d:b9:4e:e6:50
> > > ppb1 at pci0 dev 2 function 3 "AMD AMD64 16h PCIE" rev 0x00: msi
> > > pci2 at ppb1 bus 2
> > > em1 at pci2 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:0d:b9:4e:e6:51
> > > ppb2 at pci0 dev 2 function 4 "AMD AMD64 16h PCIE" rev 0x00: msi
> > > pci3 at ppb2 bus 3
> > > em2 at pci3 dev 0 function 0 "Intel I211" rev 0x03: msi, address 00:0d:b9:4e:e6:52
> > > ppb3 at pci0 dev 2 function 5 "AMD AMD64 16h PCIE" rev 0x00: msi
> > > pci4 at ppb3 bus 4
> > > iwm0 at pci4 dev 0 function 0 "Intel Dual Band Wireless AC 7260" rev 0x73, msi
> > > ccp0 at pci0 dev 8 function 0 "AMD Cryptographic Co-processor v3" rev 0x00
> > > xhci0 at pci0 dev 16 function 0 "AMD Bolton xHCI" rev 0x11: msi, xHCI 1.0
> > > usb0 at xhci0: USB revision 3.0
> > > uhub0 at usb0 configuration 1 interface 0 "AMD xHCI root hub" rev 3.00/1.00 addr 1
> > > ahci0 at pci0 dev 17 function 0 "AMD Hudson-2 SATA" rev 0x40: apic 4 int 19, AHCI 1.3
> > > ahci0: port 0: 6.0Gb/s
> > > scsibus1 at ahci0: 32 targets
> > > sd0 at scsibus1 targ 0 lun 0: <ATA, InnoDisk Corp. -, S164> SCSI3 0/direct fixed naa.52469309ca222959
> > > sd0: 30533MB, 512 bytes/sector, 62533296 sectors, thin
> > > ehci0 at pci0 dev 19 function 0 "AMD Hudson-2 USB2" rev 0x39: apic 4 int 18
> > > usb1 at ehci0: USB revision 2.0
> > > uhub1 at usb1 configuration 1 interface 0 "AMD EHCI root hub" rev 2.00/1.00 addr 1
> > > piixpm0 at pci0 dev 20 function 0 "AMD Hudson-2 SMBus" rev 0x42: SMBus disabled
> > > pcib0 at pci0 dev 20 function 3 "AMD Hudson-2 LPC" rev 0x11
> > > sdhc0 at pci0 dev 20 function 7 "AMD Bolton SD/MMC" rev 0x01: apic 4 int 16
> > > sdhc0: SDHC 2.0, 50 MHz base clock
> > > sdmmc0 at sdhc0: 4-bit, sd high-speed, mmc high-speed, dma
> > > pchb2 at pci0 dev 24 function 0 "AMD AMD64 16h Link Cfg" rev 0x00
> > > pchb3 at pci0 dev 24 function 1 "AMD AMD64 16h Address Map" rev 0x00
> > > pchb4 at pci0 dev 24 function 2 "AMD AMD64 16h DRAM Cfg" rev 0x00
> > > km0 at pci0 dev 24 function 3 "AMD AMD64 16h Misc Cfg" rev 0x00
> > > pchb5 at pci0 dev 24 function 4 "AMD AMD64 16h CPU Power" rev 0x00
> > > pchb6 at pci0 dev 24 function 5 "AMD AMD64 16h Misc Cfg" rev 0x00
> > > isa0 at pcib0
> > > isadma0 at isa0
> > > com0 at isa0 port 0x3f8/8 irq 4: ns16550a, 16 byte fifo
> > > com0: console
> > > com1 at isa0 port 0x2f8/8 irq 3: ns16550a, 16 byte fifo
> > > pcppi0 at isa0 port 0x61
> > > spkr0 at pcppi0
> > > lpt0 at isa0 port 0x378/4 irq 7
> > > wbsio0 at isa0 port 0x2e/2: NCT5104D rev 0x53
> > > vmm0 at mainbus0: SVM/RVI
> > > uhub2 at uhub1 port 1 configuration 1 interface 0 "Advanced Micro Devices product 0x7900" rev 2.00/0.18 addr 2
> > > ugen0 at uhub2 port 4 "Intel product 0x07dc" rev 2.00/0.01 addr 3
> > > vscsi0 at root
> > > scsibus2 at vscsi0: 256 targets
> > > softraid0 at root
> > > scsibus3 at softraid0: 256 targets
> > > root on sd0a (6bdb4228bb6f3cec.a) swap on sd0b dump on sd0b
> > > iwm0: hw rev 0x140, fw ver 16.242414.0, address 80:86:f2:d8:a1:26
> > >
> >

Reply | Threaded
Open this post in threaded view
|

Re: [SOLVED] Re: apu2 em0/dhclient problems

Chris Cappuccio
Edgar Pettijohn [[hidden email]] wrote:
>
> Don't know why it works, but em1 works. I guess I'll rewrite my config files.
>

This shouldn't be an acceptable solution to you. Unless the port is physically
damaged, you should figure out what's going on. Tcpdump is a great start.

Chris